Qa manager

A reputable appliance manufacturing company in East London seeks to employ a QA Manager Essential Qualifications and Experience: National Diploma 5 – 7 years’ experience in a manufacturing environment at a Supervisory level Advanced computer literacy   Desirable Qualifications and Experience: Postgraduate Honours or Master’s Degree (e.g. MBA) 7 – 10 years’ experience in a manufacturing environment at a management level   Critical Functions   Warranty reductions: Control and coordinate the activities of the quality assurance department to achieve specified targets Data Control: Retrieve data from the company Intranet and IT Analyse data Establish trends Implement corrective actions Monitor data for improvements Attend monthly warranty meetings and supply information   Fall Off reduction: Control and coordinate the activities of the Quality Assurance Department to achieve specified targets Data Control: Retrieve data from the company Intranet and IT Analyse data Establish trends Implement corrective actions Monitor data for improvements Provide information to Production department weekly Liaise with process department with respect to specific issues   ISO : Maintain and improve on the quality management system Coordinate company activities to ensure consistency and uniformity Conduct process and system audits Coordinate 2nd party audits   General: Compile stats for inclusion to monthly board packs Attend monthly EXCO meetings Participate in LEAN SteerCom Attend weekly engineering timing meetings   People Management and Development: Conduct performance management so that objectives are set and measured to meet  employee and department needs Recruit and interview new employees, when necessary Identify potential successors for all key positions within the department to ensure effective succession planning Enhance employee productivity by increasing employee morale and promoting employee satisfaction Retain the talent and skills of employees by driving training and development Uphold the company values and lead by example  

A FMCG manufacturing company located in Gauteng is currently looking for an experienced QA Manager. The minimum requirements include: • Diploma / Degree in Quality. • 6 - 8 years FMCG manufacturing experience. Should you meet the requirements for this position, please email your CV or fax to 865 - show phone -. You can also contact Bianca or Kelly on 215 - show phone - or alternatively visit our website on www.hireresolve.co.za. Correspondence will only be conducted with short listed candidates. Should you not hear from us within 3 days, please consider your application unsuccessful.

One of our to clients in the pharmaceutical industry is looking for a QA Manager   Minimum Requirements: Minimum of 5 years’ experience in quality related of production in the pharmaceutical/ medical industry 3+ years experience B.Pharm / QA Diploma Supply chain quality management | Project management and technical reporting experience essential Experience with ISO standards and GMP quality systems required in the pharmaceutical/  medical device industry Enthusiasm and quality improvement orientation Previous senior level administration experience essential (preferably in a pharmaceutical company) in MS Word, Excel, Powerpoint Proficiency on QMS and Coral and a willingness to learn additional packages as necessary Excellent verbal and written communication skills Ability to respond to urgent requests timeously Ability to adhere to agreed performance standard Self-driven and motivated | able to prioritise and resolve competing priorities     Please note if you have not received feedback within two weeks consider your application unsuccessful. For more exciting positions visit our website www.higherintelligence.co.za

My client has a vacancy for a Quality Assurance / Dispatch Manager Manager to join their dynamic team.   Duties include the following, but not limited to: Quality assurance: Sampling of daily produced products to ensure they meet specifications Release for sale testing of large orders for our big retail customers Managing cleanliness  in factory – and managing the cleaning staff Dispatch manager: Manage two order pickers  who pack orders for smaller clients Manage all our outbound couriers such as arrange collections, shipment times, arrivals at our factory and loading Arrange delivery times for order to larger retailers Co-ordinate with  production planning to make sure orders are fulfilled on time Sign off on courier statements for payment by accounts (ie make sure all invoices are real, matched by PODs, etc) Keep inventory of stock at distributors   Requirements: Food safety management background, especially a HACCP environment QA experience also a big plus. Having experience in the QA side more important than the outbound logistics side, but must be willing to perform both roles   Salary: R - R per month, negotiable depending on experience and qualifications. Please state your salary expectation and notice period along with your application.   To apply for the above mentioned position, please send your CV to and quote the following reference CKQADM

MSP represents one of the biggest and leading multinational pharmaceutical development companies, seeking to employ an experienced and knowledgeable Pharmacist to manage their Quality Assurance and Compliance division. The successful incumbent will be responsible for overseeing the QMS, liaising with the MCC regarding company compliance, leading the QMR and ensuring adherence to regulations, management of the QA department and external service providers, and more. Requirements: • Hold a B.Pharm degree • Hold a postgraduate qualification in Quality Management/Compliance/Business will be advantageous • Must be registered with the SAPC as a Pharmacist and MCC as Responsible Pharmacist • Extensive quality assurance management expertise within a multinational pharmaceutical company • Extensive knowledge of international regulations and QA guidelines • At least 5 Years senior management experience • Fully bilingual in English and an African language • Proven interpersonal, assertiveness and decision-making skill Please note that our client’s approved Employment Equity plan and targets will be considered as part of the recruitment process aligned to the group’s Employment Equity strategy. Should you meet the requirements for this position, please email your CV or You can alternatively contact Rebecca or Danika on 211 - show phone - or visit our website on www.staffingprojects.co.za. Please note that correspondence will only be conducted with short listed candidates within 3 days of application received.

Our client, a leader in the automotive component sector, seeks to employ a Quality Planning Technician to join their Quality department. Duties: Monitor and control non-conforming parts according to Management Handbook procedures Coordinate task related supplier complaints and special release Maintain the Control plan, Inspection plan work instruction and other documents relevant to quality management system Monitor Daily scrap performance and conduct root cause analysis for top scrap Conduct random audits/line inspection when required Conduct Exports checks Support with activities for PPAP release Verification of accredited quality data in SAP Be agreeable to work in any station specified by QA Manager Requirements: University Degree in Metallurgy, Mechanical or Industrial Engineering. Quality qualification will be an advantage 1-3 Years experience in automotive and quality environment Familiarity with measuring principles and equipment Able to work with SAP and SPC programmes Able to create and update quality relevant procedures and instructions Quality core tools knowledge Be conversant with inspections process and MSA requirements SECTOR: Automotive

Qualification: Diploma in Quality or equivalent. ISO accredited and knowledge on OHSAS. Skills & Experience: Responsible for field quality control. Client Liaison. Attend all client site meetings as required, with reference as Quality Assurance management issues. Co-ordination of Site QA /QC personnel. Functionally responsible for the key performance areas of QA/QC officer on sites. Interim reports to the SHEQ manager. Compiling monthly Quality reports. Application of SHEQ specifications. Construction regulations. SHEQ planning. Environmental constraints and criteria. Knowledge of a radiological. Entrolled safety environment, PTO. Risk assessments From R to R

Job Purpose Coordination of a project including technical, scheduling, cost control, and progress monitoring.   Responsibilities and Duties   ·                Participate to project evaluation and quotes. ·                Attend Production meetings and understand the project’s and the customer’s requirements. ·                Plan and prioritize production activities ·                Implement the policies and targets related to production. ·                Follow-up on the production activity, maintaining and updating production task list. ·                Continual monitoring of progress, conduct time studies and improve efficiency for production related processes identifying any shortcomings and possible problems. ·                Implement Health and Safety policies (with Management’s consent). ·                Project management (including procurement, fabrication follow-up, project profitability report) ·                Coordinate ‘Start Up’ meetings with Workshop Foreman with project commencement and as required during the project phase. ·                Monitor the presence of all the production personnel and prepare daily timesheets along with assignment of personnel to the on-going projects. ·                Manage shift pattern in an efficient and economic manner after prior consultation with project manager. ·                Responsible for discipline production personnel and bringing to the attention and action of management any illegal, unsafe, unprofessional and irresponsible activities. ·                Daily tasking of safety officer for safety related mater pertaining to production activities. ·                Contact and liaise with clients and stakeholders to clarify technical aspects of projects. ·                Follow up and monitor, with the Workshop Foreman, important resources such as: (i)         Equipment (type and quantity to be adapted to the workload), (ii)        Stock (Consumables, hand tool equipment and raw material), (iii)       Maintenance operations (schedule, frequency, expense, …) ·                Determine special tooling requirement for upcoming project. ·                Organize the procurement of raw material for projects as charged. Orders and purchase consumables and material as required for the workshop as endorsed by management. ·                Coordinate and ensure that issued drawings and technical information correspond to the client and contract requirements. ·                Coordinate with the QA/QC department for project preparation (i.e. Welding book, WPS, Selection of qualified welders) and NDT requirements during the project. ·                Monitor the fabrication and report the progress during production meetings, and upon request by management and clients. ·                Prepare, assist and review Fabrication Data Book with the QC Department. ·                Prepare the Project Summary upon project completion for management.         ·                Participate with the QA and safety systems development in the company. ·                Responsible to familiarize yourself and promote and enforce as far as possible the company quality, safety and environmental policies and procedures. ·                Identify and advise management on personnel, facility and equipment requirements.  Identify shortcomings and make recommendations for continuous improvements.     Qualification and Knowledge / Requirements ·                Engineering Diploma or Tradesman with Supervising/site experience For more information - please email a comprehensive cv to

Various Positions Required:   Contract Inspections Supervisor (Inspections) Inspections - Bridge Inspectors Inspections - Sign Inspectors Inspections - Trainee Sign Inspectors Inspections - Trainee Highway Inspectors Inspections - QA Supervisor Customer Service -   Cust. Service Manager Inspections - Operators (Cherry Picker / Crane & Antennuator Operators) EAMS Dept Customer Service - Communications Manager Customer Service - Communications Asst.

POSITION - Injection Moulding Machine Setter WIRQUIN, A manufacturer of innovative sanitary and plumbing equipment, has a vacancy for an experienced, self-motivated, and driven Plastic Machine Setter based in Uitenhage. AS SETTER, YOU I WILL BE EXPECTED TO: 1.) Apply Organisational Policies and Procedures 2.) Be responsible for re-setting activities on your shift on all Injection, compression, and ancillary equipment. 3.) Set machine settings to setup sheets, connecting water, hydraulics, and air feeds as required. 4.) Perform QA tests & inspections after every mould change or production start-up to ensure quality products 5.) Conduct pre-operating inspections to determine operational fitness and safety of the machines and the environment 6.) Apply quality procedures and standards to all areas of operating influence 7.) Ensure all process documentation relating to manufacturing is available, correct and aligned to re-setting KPI’s 8.) Ensure all production documentation relating to manufacturing is available and correctly completed for each shift 9.) Plan / prepare tooling for all processes / product changes within specified set-up times 10.) Identify / Initiate maintenance & mould repair work orders for moulds, machines & auxiliary equipment 11.) Participate in resolving all relevant Health, Safety and Environmental issues in the workplace 12.) Perform relevant routine First Line Preventative Maintenance according to defined checklists and safety standards 13.) Actively engage in continuous improvement practices 14.) Ensure area is clean and clear of tools, water hoses and other equipment when setup is done. 15.) Operate any machine / combination of machines at or below my current level 16.) Communicate any pertinent information on incoming and outgoing shift. Salary Market related Personal Character Team player Strong attention to Detail Good time management Problem solver skills Energetic Requirements Matric (Grade 12) (not negotiable) Experience in various raw materials Previous experience in the plastics field will be a distinct advantage. This position is shift based and week-end work will be required from time to time Should you meet the requirements and are ready for a new, fast-paced environment & challenge, we would love to hear from you. Please submit your CV to the HR Manager at – hr@wirquin.co.za The for the applications end at the close of business on the 03 of October 2021