Rode nt55 multi

Rode - NT55 Dual Capsule Condenser Recording Mic The Rode NT55 builds on the success of the NT5, providing an excellent mic for practically any recording application. The NT55 utilizes the 1/2" externally biased gold sputtered true condenser transducer used in the NT5. The NT55 is a state-of-the-art low noise balanced output microphone, exhibiting a wide dynamic range and full frequency response. The NT55 comes with 2 different condenser microphone heads to provide a variety of polar patterns. The NT55 is complemented with a diverse range of accessories to better facilitate positioning.

Rode - NT55-MP Dual Capsule Condenser Recording Mics(Matched Pair) What's more useful than a Rode NT55? A pair of Rode NT55s. Available as a stereo matched pair in the Rode NT55-MP set, the Rode NT55 small-diaphragm condenser microphone utilizes the 1/2" gold sputtered true condenser transducer used in the internationally renowned Rode NT5. The NT55 upgrades the NT5, adding switchable omni and cardioid capsules, a three-position dB pad, and a three-position high-pass filter.

The Rode NT55 is a compact condenser microphone designed to accurately reproduce vocals and general instruments in recording and sound reinforcement applications. The NT55 feature a 3 position Pad switch for added headroom while capturing loud, peaking audio signal. A 3-position low-cut filter switch eliminates low frequency noise. The NT55 is an ideal choice for vocals, guitar, drums, cabinets and more. The NT55 includes interchangeable omnidirectional and cardioid capsules for even further flexibility. Interchangeable Capsules Omnidirectional and cardioid capsules are included for added flexibility. 3-Position Pad Switch 0, -10 and -20dB pad switch enhance headroom and minimize distortion. 3-Position Low Frequency Roll Off Flat, 75Hz and 150Hz roll-off filter switch minimizes low frequency noise. Specifications Transducer Condenser Polar Pattern Cardioid and Omnidirectional Capsule Frequency Response 20Hz to 20kHz Dynamic Range (Typical) 121dB (per IEC651, IEC268-15) Signal-to-Noise Ratio 15dB SPL (per IEC651, IEC268-15) Maximum Input Sound Level 136dB (@ 1% THD into 1k ohm) Power Requirements 48 Volts Phantom Output Impedance 100 ohms Output Connectors 3-pin XLR Pad 0, -10 and -20dB Low Frequency Roll-Off Flat, 75Hz and 150Hz Dimensions 5.70 x.78" (145 x 20mm) (Length x Diameter) Weight 110g (4oz) In the Box RM5 Clip Omnidirectional Capsule Cardioid Capsule Metal Case 10 Year Warranty

The Rode NT55 builds on the success of the NT5, providing an excellent mic for practically any recording application. The NT55 utilizes the 1/2" externally biased gold sputtered true condenser transducer used in the NT5. The NT55 is a state-of-the-art low noise balanced output microphone, exhibiting a wide dynamic range and full frequency response. The NT55 comes with 2 different condenser microphone heads to provide a variety of polar patterns. The NT55 is complemented with a diverse range of accessories to better facilitate positioning. Features: Small-diaphragm Condenser Cardioid and Omnidirectional Capsules 3-position Pad 3-position highpass Filter For Stage or Studio

Rode NTG2 Multi-Powered Shotgun Microphone The RØDE NTG2 is a lightweight condenser shotgun microphone, designed for professional applications within the film, video, television and production industries. Its full frequency response, low noise and audio transparency make it an ideal film, video, and voice over microphone, while its low weight (161gm/5.7oz without battery) makes it an ideal boom microphone. In addition to the native 20Hz-20kHz frequency response a selectable high-pass filter at 80Hz is available, which will prevent low end noise such as air conditioners and traffic from being recorded. The NTG2 operates either from a AA (1.5V) battery or P48 phantom power which can be supplied by professional cameras, audio recorders and power supplies. The battery power option makes the NTG2 ideal for scenarios where the camera does not supply phantom power such as DSLR video. The WSVM windshield is supplied to minimise light wind noise and plosives during recording. The optional ‘DeadCat’ furry is recommended for outdoor applications.

Like the NT5, the RDE NT55 is a small-diaphragm, true-condenser cardioid microphone, sometimes referred to as a 'pencil mic'. The NT55 adds both a three position pad (0, -10dB, -20dB) and three stage high pass filter (Off, 75Hz, 150Hz), and includes the interchangeable NT45-O omnidirectional capsule. Intended for recording acoustic instruments, drum overheads, cymbals and live performances, the compact externally polarized mic employs a 1/2' capsule, an active J-FET impedance converter with bipolar output buffer. Its tight cardioid pickup pattern also makes it ideal for use as an indoor dialogue microphone for filmmaking on a mic stand or boom. Finished in durable satin nickel, the NT55 available as a single microphone or as an acoustically matched pair. The NT55 is designed and made in Australia, and covered by RDE's industry leading 10 year warranty.

Rode - NT45-O OMNI Capsule For NT45 Mic If you want that "being in the room with the music" feeling in your recordings, the way to achieve that is with an omnidirectional mic. If you already have a RODE NT6, NT4, NT5, NT5-S, or NT55 cardioid mic and don't want to spring for another mic, RODE offers the NT45-O capsule as an alternative, which will work with the aforementioned RODE mics. The RODE NT45 capsules offer a selection of frequency responses and polar patterns in a convenient and easy to use interchangeable format. The capsules are designed for studio recording, live sound reinforcement, and any application where sound quality and mounting flexibility are required. Designed and manufactured in Australia, the NT45-O capsule offers high SPL capabilities with low distortion and noise.

Rode - NT45-C Cardioid Capsule For NT45 Mic The Rode NT45C is a replacement cardioid capsule for the Rode NT4, NT5, NT6 and NT55 large diaphragm condenser microphones. The capsule is designed to provide identical sonic character to that of the original.

The Rode NT55MP are simply a matched, stereo pair of NT55 microphones. The pair are matched in frequency and sensitivity response for accurate stereo audio pickup of vocal ensembles, instruments, ambiance and more. The NT55 feature a 3 position Pad switch for added headroom while capturing loud, peaking audio signal. A 3-position low-cut filter switch eliminates low frequency noise. The NT55 is an ideal choice for vocals, guitar, drums, cabinets and more. The NT55 includes interchangeable omnidirectional and cardioid capsules for even further flexibility. Interchangeable Capsules Omnidirectional and cardioid capsules are included for added flexibility. 3-Position Pad Switch 0, -10 and -20dB pad switch enhance headroom and minimize distortion. 3-Position Low Frequency Roll Off Flat, 75Hz and 150Hz roll-off filter switch minimizes low frequency noise. Specifications Transducer Condenser Polar Pattern Cardioid and Omnidirectional Capsule Frequency Response 20Hz to 20kHz Dynamic Range (Typical) 121dB (per IEC651, IEC268-15) Signal-to-Noise Ratio 15dB SPL (per IEC651, IEC268-15) Maximum Input Sound Level 136dB (@ 1% THD into 1kOhm) Power Requirements 48V Phantom Output Impedance 100 ohms Output Connectors 3-pin XLR Pad 0, -10 and -20dB Low Frequency Roll-Off Flat, 75Hz and 150Hz Dimensions 5.70 x 0.78" (145 x 20mm) (Length x Diameter) Weight 4 oz (110g) Shipping Info Shipping Weight 3.5 lb Box Dimensions (WxHxD) 12.0 x 4.5 x 14.5 In the Box 2 x RM5 Clip 2 x Omnidirectional Capsule 2 x Cardioid Capsule Case 10 Year Conditional Warranty

Estimated delivery time: working days (Imported from the UK) - T&C's Apply Please note that all Christmas gift orders need to be placed before the 14th of November to ensure that they are delivered to you in time. This item includes free delivery within South Africa. Spec sheet (Acrobat pdf file)Compatible microphones: RNTG1 RNTG2 RNTG3 RNT4 NT5 NT55 M3 RVM RSVM RVMPROThe R DE Micro Boompole provides ultimate boom pole performance in a convenient and portable size.Intuitive twist locks allow the Micro Boompole's three sections to smoothly extend to mm (6.75') while the ergonomic grip provides comfort during use.precision balanced anodized aluminium constructionNew intuitive lock/release systemErgonomic grip handleWeight gmDimensions mmH x mmW x mmDRode also offer a pack of five clips to keep your cable neat and tide RBPClIPSDo you need a thread adaptor to match the thread size on your microphoneIJ We can offer a choice of three: To adapt a 5/8 socket to a 3/8 socket To adapt a 3/8 socket to a 5/8 socket To adapt a 5/8 socket to a 3/8 socket with a ridged top to make

Estimated delivery time: working days (Imported from the UK) - T&C's Apply Please note that all Christmas gift orders need to be placed before the 14th of November to ensure that they are delivered to you in time. This item includes free delivery within South Africa. Instruction Manual (Acrobat pdf file) Spec sheet (Acrobat pdf file)Studio and location Multi Powered Condenser Microphone The M3 is an extremely versatile microphone that is at home in the studio on location or wherever a low-noise wide-response cardioid condenser microphone is demanded.An end address condenser microphone the M3 features a heavy-duty metal body category leading low self-noise three stage PAD (O -10db -20db) a battery status lED and a High Pass Filter.The M3 also comes complete with windshield and a stand mount and can be powered via a 9V battery or V Phantom. Rugged metal body Internal capsule shock mount Switchable High-Pass Filter @ 80Hz-12dB/Oct Three step PAD - Flat -10dB and -20dB low handling noise Heat treated high strength head mesh 9V battery power or V phantom power Battery status indicator SpecificationPower PV) PV) phantom supply or 9V battery Acoustic Principle Pressure gradient Directional Pattern Cardioid Frequency range 40 Hz - 20 kHz Output impedance 200Ohm Signal noise ratio 73 dB SPl (A - weighted per IEC651) Equivalent noise 21 dB SPl (A - weighted per IEC651) Maximum SPl 142dB SPl (@ 1kHz 1% THD into 1KOhm load) Maximum output voltage +9.22dBu (@ 1kHz 1% THD into 1KOhm load) Sensitivity -40 dB re 1 Volt/Pascal (10 mV @ 94 dB SPl) +/- 3 dB @ 1kHz Weight 390gm Dimensions 225mmH x 33mmW x 33mmD Included Accessories Carry case RM3 stand mount and WSM3 wind shield Optional Accessories DS1 desk stand and Tripod