Rode ntg long

Rode NTG-3, 2 condenser directional microphone + keep drum MS055 tabletop tripod Maximum maximum sound pressure level 131dB Frequency range 20 - 20000 Hz Power supply or 1.5 V battery or phantom power + keep drum MS055 tabletop tripod Rode NTG 2 condenser Directional Microphone + Keep drum MS055 tabletop tripod The NTG-3, 2 condenser Directional Microphone from Rode offers a super cardioid polar pattern with excellent direction. With a low equivalent noise level of only 18 dB and a maximum maximum sound pressure level of 131dB is the highest sound quality. For the operation of the NTG2 is a phantom power or 1.5 V battery to protect the microphone with power. Technical details: - Polar Pattern: Super Cardioid - Maximum sound pressure: 131 dB - equivalent noise level: 18 dBA - Frequency range: 20 Hz 20 kHz - Sensitivity: 15 mV/Pa - Dynamic Range: 113 dB - Output Impedance: 250 Ohm - Power Supply: 48 volt (Phantom Power) or 1.5 V battery (AA), Weight: 161 g including battery + Keep drum MS055 tripod table stand 'The Keep drum MS055 tripod stand is an extendable table tripod in three legged design is manufactured from metal. In the height on this dummy is the MS055 15 - 20 cm - Extendable and has a 5/8 thread (no thread reducer included). The rubber stand legs combined Natoin with a weight of 250 g for a secure footing. Details: - Tripod - Heavy Duty Construction - can be extended from 15 - 20 cm - Rubberised legs ' - 5/8 thread - Chrome Finish - Weight: 250 g

Rode NTG-2+Dead cat Used once, prefer the NTG-1 because the NTG-2 is too long for my video camera. 100% perfect condition, Box, and Dead cat + short XLR cable

The Rode NTG-2 is a great long condenser shotgun mic, perfect for professional use in video production. It's rugged metal construction and low handling noise make it ideal for video professionals. Quick Facts: broadcast sound quality low noise circuitry condenser transducer two step high pass filter (Flat/80Hz) P48 phantom power OR AA battery option includes mic clip, wind shield and zip case connects via XLR For more information, see it on the Rode website here

The Rode NTG-3 is a professional, precision long condenser shotgun microphone that is designed for sound wherever high-res broadcast audio is required. This mic offers 50% less self-noise than most other shotgun mics. Quick Facts: Superior broadcast sound quality high sensitivity designed to withstand adverse environmental conditions includes aluminium storage cylander, pop filter, mic clip and zip pouch connects via XLR For more information, see it on the Rode website here

The Rode NTG-8 is a broadcast quality FR-bias shotgun mic. It has increased directionality across a wide frequency response range, making it the ideal mic for film, tv and outdoor broadcasting. Quick Facts: Superior broadcast sound quality high sensitivity supercardoit polar pattern designed to withstand environmental conditions very low handling noise includes aluminum cylinder, MS8 shock mount and wind shield For more information, see it on the Rode website here

The Rode NTG-1 is a fantastic condenser shotgun mic, perfect for professional use in film and TV. It's broadcast sound quality and low noise circuitry make it ideal for production industries. Quick Facts: supercardoid polar pattern condenser transducer two step high pass filter (Flat/80Hz) Low handling noise includes mic clip, wind shield and zip case connects via XLR For more information, see it on the Rode website here

The Rhode NTG2 is a lightweight condenser shotgun microphone, designed for professional applications within the film, video, television and production industries. Its full frequency response, low noise and audio transparency make it an ideal film, video, and voice over microphone, while its low weight makes it an ideal boom microphone. In addition to the native 20Hz-20kHz frequency response a selectable high-pass filter at 80Hz is available, which will prevent low end noise such as air conditioners and traffic from being recorded.

Never been used, only opened to test it. I have a shock mount for it a dead cat and a xlr cable as extras. All in perfect con. All together costed R new from Orms. Sms - Or email. Thanks,

Rode - S1 Stage Large Diaphragm Condenser Microphone The RØDE S1 Pro Vocal Condenser Mic is a professional-quality microphone, specifically designed for live vocal performance. It employs a true condenser transducer for optimal sound reproduction. The frequency response is tailored to ensure clear vocals while reducing handling noise. The unidirectional (super cardioid) pickup pattern limits background noise and reduces the susceptibility to feedback. The 5-piece mesh head provides filtering of breath, wind, and plosive noises while not interfering with the RØDE S1's sensitivity or frequency response. The hardened mesh head also protects the precision condenser transducer from airborne contaminants and possible impact during performance and transit. The ergonomic design of the S1 also makes it extremely comfortable to hold and control during performance. The S1 mic requires P48V phantom supply and will work with most professional mixing consoles that incorporate this standard. The high-level output of the S1 is electronically balanced to reduce loss over long cable runs with the additional benefit of high-level rejection of electromagnetic interference.

The Rode Blimp Extension Kit is an add-on extension of the Rode Blimp, allowing you to use the Blimp with long shotgun mics, including the NTG8, or any third party mic up to 600mm. Quick Facts: includes a 256mm extension piece, two sets of silicone bands, and an extra long Dead Wombat fur windshield and brush The Rode Blimp is required in order to use this product For more information, see it on the Rode website here

The Rode NTG-2 is a condenser shotgun microphone designed for professional audio capturing in the field or indoors. With a history of manufacturing quality studio microphones, Rode has implemented low noise output electronics and wide bandwidth, both of which attribute to the NTG-2's broadcast sound quality. The super-cardioid polar pattern and line plus gradient acoustic principle effectively minimize audio and noise at the off-axis (sides) of the microphone, while the front of the capsule accurately reproduces incoming audio signal. The result is greater intelligibility and signal-to-noise ratio when using the NTG-2 in noisy environments. The NTG-2 is powered with an internal 1.5V AA size battery or an external 48 Volt phantom power source. The output is a standard 3-pin XLR male connector. The microphone features a rugged, all metal, lightweight enclosure that is ideal for camera mounting yet durable enough to withstand the rigors of heavy road use. The Rode NTG-2 is packaged with a microphone stand mount and windscreen. Battery Or Phantom Powered The Rode NTG-2 can be powered with an internal 1.5V AA battery or external 48V phantom power source. Super-Cardioid Polar Pattern The super-cardioid polar pattern and line gradient acoustic principle allow for a narrow pick up pattern at the front of the capsule while minimizing noise at the off-axis sections. Lightweight Durable Construction The NTG-2 features a lightweight metal housing that is ideal for camera mounting. Low Handling Noise Low noise output electronics provide high signal-to-noise ratio. The NTG-2 is designed to also reduce noise caused by handling, rigid mounting hardware, loose cabling etc. Specifications Transducer Condenser Polar Pattern Supercardioid Frequency Response 20Hz to 20kHz Sensitivity -36.0dB re 1 Volt/Pascal (15.00mV @ 94 dB SPL) /- 2 dB @ 1kHz Signal-to-Noise Ratio 76dB (1kHz rel, 1Pa; per IEC651, IEC268-15) Maximum Input Sound Level 131dB SPL (@ 1kHz, 1% THD into 1K? load) Power Requirements 48V phantom, 44V to 52V Output Impedance 250? Output Connectors 3-pin XLR balanced Pad No Low Frequency Roll-Off Selectable HPF @ 80Hz/12dB octave Dimensions 10.94 x.87" (278 x 22mm) (Length x Diameter) Weight 5 oz (161g) Shipping Info Shipping Weight 1.1 lb Box Dimensions (WxHxD) 5.984 x 2.126 x 13.307 In the Box 10 Year Warranty Microphone Stand Mount Windscreen Zippered Pouch

The silver Rode NTG-3 Shotgun Microphone is a professional shotgun microphone that delivers a few unique qualities in order to meet the demands of today's broadcast audio engineers and boom operators. The microphone features radio-frequency (RF) interference properties that avoid annoying noise and interference caused by nearby RF sources such as radio antennas, WIFI networks, internet devices, power lines, etc. The microphone is also built to withstand the rigors of adverse weather conditions. Of course special attention is paid to the accurate, directional pickup characteristics and its frequency response, sensitivity and low noise floor, which result in pristine audio quality. The NTG-3 shotgun microphone is an ideal solution for outdoor ENG and studio applications. RF Rejection The microphone features radio-frequency (RF) interference properties that avoid annoying noise and interference caused by nearby RF sources such as radio antennas, WIFI networks, internet devices, power lines, etc. Withstands Adverse Conditions The microphone is constructed to withstand adverse weather conditions for more stable use outdoors. Supercardioid Line+Gradient Pickup The supercardioid, shotgun characteristics provide excellent off-axis rejection, focused pickup and longer range. Specifications Transducer Condenser Polar Pattern Line-Gradient Supercardioid Frequency Response 40Hz to 20kHz Dynamic Range (Typical) 117dB Signal-to-Noise Ratio 81dB SPL (A-weighted) Maximum Input Sound Level 130dB Power Requirements 48V Phantom Power Output Impedance Nominal: 25 ohms Output Connectors 3-pin XLR Pad No Low Frequency Roll-Off No Dimensions (LxDiameter) 10 x 0.74" (255 x 19mm) Weight 5.74oz (163g) In the Box Water Resistant Aluminum Storage Case Windshield Zip Pouch Microphone Clip 10 Year Warranty