Rode nt55 multi pattern

The Rode NT55 is a compact condenser microphone designed to accurately reproduce vocals and general instruments in recording and sound reinforcement applications. The NT55 feature a 3 position Pad switch for added headroom while capturing loud, peaking audio signal. A 3-position low-cut filter switch eliminates low frequency noise. The NT55 is an ideal choice for vocals, guitar, drums, cabinets and more. The NT55 includes interchangeable omnidirectional and cardioid capsules for even further flexibility. Interchangeable Capsules Omnidirectional and cardioid capsules are included for added flexibility. 3-Position Pad Switch 0, -10 and -20dB pad switch enhance headroom and minimize distortion. 3-Position Low Frequency Roll Off Flat, 75Hz and 150Hz roll-off filter switch minimizes low frequency noise. Specifications Transducer Condenser Polar Pattern Cardioid and Omnidirectional Capsule Frequency Response 20Hz to 20kHz Dynamic Range (Typical) 121dB (per IEC651, IEC268-15) Signal-to-Noise Ratio 15dB SPL (per IEC651, IEC268-15) Maximum Input Sound Level 136dB (@ 1% THD into 1k ohm) Power Requirements 48 Volts Phantom Output Impedance 100 ohms Output Connectors 3-pin XLR Pad 0, -10 and -20dB Low Frequency Roll-Off Flat, 75Hz and 150Hz Dimensions 5.70 x.78" (145 x 20mm) (Length x Diameter) Weight 110g (4oz) In the Box RM5 Clip Omnidirectional Capsule Cardioid Capsule Metal Case 10 Year Warranty

Like the NT5, the RDE NT55 is a small-diaphragm, true-condenser cardioid microphone, sometimes referred to as a 'pencil mic'. The NT55 adds both a three position pad (0, -10dB, -20dB) and three stage high pass filter (Off, 75Hz, 150Hz), and includes the interchangeable NT45-O omnidirectional capsule. Intended for recording acoustic instruments, drum overheads, cymbals and live performances, the compact externally polarized mic employs a 1/2' capsule, an active J-FET impedance converter with bipolar output buffer. Its tight cardioid pickup pattern also makes it ideal for use as an indoor dialogue microphone for filmmaking on a mic stand or boom. Finished in durable satin nickel, the NT55 available as a single microphone or as an acoustically matched pair. The NT55 is designed and made in Australia, and covered by RDE's industry leading 10 year warranty.

The Rode NT55MP are simply a matched, stereo pair of NT55 microphones. The pair are matched in frequency and sensitivity response for accurate stereo audio pickup of vocal ensembles, instruments, ambiance and more. The NT55 feature a 3 position Pad switch for added headroom while capturing loud, peaking audio signal. A 3-position low-cut filter switch eliminates low frequency noise. The NT55 is an ideal choice for vocals, guitar, drums, cabinets and more. The NT55 includes interchangeable omnidirectional and cardioid capsules for even further flexibility. Interchangeable Capsules Omnidirectional and cardioid capsules are included for added flexibility. 3-Position Pad Switch 0, -10 and -20dB pad switch enhance headroom and minimize distortion. 3-Position Low Frequency Roll Off Flat, 75Hz and 150Hz roll-off filter switch minimizes low frequency noise. Specifications Transducer Condenser Polar Pattern Cardioid and Omnidirectional Capsule Frequency Response 20Hz to 20kHz Dynamic Range (Typical) 121dB (per IEC651, IEC268-15) Signal-to-Noise Ratio 15dB SPL (per IEC651, IEC268-15) Maximum Input Sound Level 136dB (@ 1% THD into 1kOhm) Power Requirements 48V Phantom Output Impedance 100 ohms Output Connectors 3-pin XLR Pad 0, -10 and -20dB Low Frequency Roll-Off Flat, 75Hz and 150Hz Dimensions 5.70 x 0.78" (145 x 20mm) (Length x Diameter) Weight 4 oz (110g) Shipping Info Shipping Weight 3.5 lb Box Dimensions (WxHxD) 12.0 x 4.5 x 14.5 In the Box 2 x RM5 Clip 2 x Omnidirectional Capsule 2 x Cardioid Capsule Case 10 Year Conditional Warranty

Estimated delivery time: working days (Imported from the UK) - T&C's Apply Please note that all Christmas gift orders need to be placed before the 14th of November to ensure that they are delivered to you in time. This item includes free delivery within South Africa. Instruction Manual (Acrobat pdf file) Spec sheet (Acrobat pdf file)Studio and location Multi Powered Condenser Microphone The M3 is an extremely versatile microphone that is at home in the studio on location or wherever a low-noise wide-response cardioid condenser microphone is demanded.An end address condenser microphone the M3 features a heavy-duty metal body category leading low self-noise three stage PAD (O -10db -20db) a battery status lED and a High Pass Filter.The M3 also comes complete with windshield and a stand mount and can be powered via a 9V battery or V Phantom. Rugged metal body Internal capsule shock mount Switchable High-Pass Filter @ 80Hz-12dB/Oct Three step PAD - Flat -10dB and -20dB low handling noise Heat treated high strength head mesh 9V battery power or V phantom power Battery status indicator SpecificationPower PV) PV) phantom supply or 9V battery Acoustic Principle Pressure gradient Directional Pattern Cardioid Frequency range 40 Hz - 20 kHz Output impedance 200Ohm Signal noise ratio 73 dB SPl (A - weighted per IEC651) Equivalent noise 21 dB SPl (A - weighted per IEC651) Maximum SPl 142dB SPl (@ 1kHz 1% THD into 1KOhm load) Maximum output voltage +9.22dBu (@ 1kHz 1% THD into 1KOhm load) Sensitivity -40 dB re 1 Volt/Pascal (10 mV @ 94 dB SPl) +/- 3 dB @ 1kHz Weight 390gm Dimensions 225mmH x 33mmW x 33mmD Included Accessories Carry case RM3 stand mount and WSM3 wind shield Optional Accessories DS1 desk stand and Tripod