Rental pa

JBL PRX 618S XLF Powered PA Subwoofer The PRX618S-XLF, extended low frequency subwoofer was designed and engineered to provide sub bass frequencies with accuracy and power. Used as a single sub in a sub/sat system or in multiples as part of a scalable, large format sound reinforcement system, the PRX618S-XLF performs with extreme efficiency and control. The subs are stackable and light-weight ensuring quick set-ups and tear-downs. And due to their rugged construction are perfect for AV rental inventories. With a pole receptacle (that accepts a SS4-BK or SS4-BK24) on the top panel and integrated stereo pass-thru this is the most powerful low-frequency complement to the PRX full-range systems. The addition of a polarity reverse option further enables system optimization.

JBL PRX 625 Powered PA Speaker If a simple set-up is required and full bandwidth output at high levels is a must, then the PRX625 is most likely the optimum solution. With the same foot print as the PRX515M, the dual 15" woofer design creates enough low frequency content to serve most live music or music playback situations. When coupled with a PRX subwoofer (or multiple subwoofers) the system becomes a high volume sound reinforcement solution, perfect for regional tour companies and AV Rental companies looking for a scalable, easy to employ audio solution. We recommend using the PRX618S-XLF in conjunction with the PRX625 as the extended low frequency capabilities of the subwoofer compliment the frequency response of the PRX625.

Wharfedale EVP-X15 MK2 15" 350W Passive Speakers (Pair) 350W RMS / 700W Program / 1400W Peak 130 dB Max SPL 45 Hz - 20 kHz frequency response 90 x 60 Elliptical Wave Guide Horn 15" woofer ProTech™ Driver 1.75" (44mm) titanium diaphragm drivers +3dB HF Frequency boost switch Speakon and 6.3mm jack connections Signal and Protect LEDs Durable black carpet covering Dual angle pole mounts New four way carry handle design     EVP-X 18B MK2 18" 600W Passive Basebin (Pair) 600 RMS / 1200W Program / 2400W Peak 130 dB Max SPL 35 Hz - 20 kHz frequency response 150 Hz crossover frequency 18" woofer ProTech™ Driver Speakon and 6.3mm jack connections Signal and Protect LEDs Durable black carpet covering 35mm pole mount insert New four way carry handle design   Wharfedale CPD3600 Power Amplifier 8 Ohms x 2: 870W RMS 4 Ohms x 2: 1300W RMS 8 Ohms Bridged: 2600W RMS 4 Ohms Bridged: 3600W RMS Class H Technology Status and clip LEDs Thermal, overcurrent, DC and output short protect circuitry 2 x Speakon outputs 2 x XLR outputs to link other audio equipment 2 x XLR inputs Peak and protect LEDs Built-in switchable limiter Continuously variable speed fan Suitable for touring, rental and installation     Samson TS20 Satellite Mounting Poles (Pair) Telescoping mounting pole for sub/satellite PA systems Heavy gauge aluminum construction with standard 1-3/8 inch diameter Secure locking-pin height adjustment Height adjustable to 56 inches Ideal for Expedition, Resound and dB Series Cabinets

The Power Edge 'Class H' amplifiers are designed for pure power Thanks to the big power reserve, excellent limiters and protections they can be used in all kinds of different applications such as discotheques, clubs, mobile audio, PA, rental, theater,... Very compact housing, only 2U high PE-series can be driven in 2 Ohm Soft start Very efficient cooling using variable speed fans Automatic current limiter Short circuit protection DC fault protection High temperature protection Overload protection Can be used in stereo, bridge and mono mode Balanced inputs with combo connectors Balanced XLR signal outputs for daisy chaining Input sensitivity correction: V / 1,0V / 1,44V 3 Speakon outputs. Power stereo 8 Ohm: 2x 800Wrms Power stereo 4 Ohm: 2x Wrms Power stereo 2 Ohm: 2x Wrms Power bridge 8 Ohm: 1x Wrms Power bridge 4 Ohm: 1x Wrms Freq. Resp. (+/-0,5dB): Hz Input Sensitivity: V~1,00dB~1.44V Input impedance: 20 k Ohm S/R ratio (A-Weighted): >100dB Damping factor: >450 Slew Rate: 60V/uS Cooling: variable speed fans Signal inputs: Balanced XLR/Jack Signal outputs: Balanced XLR Speaker outputs: Speakon® Power supply: AC230V / 50Hz Dimensions(WxHxD): 483x88x440mm (19"/2U) Weight(kg): 25kg

The CPD2600 is part of Wharfedale Pro’s latest line of professional power amplifiers driving earth shaking audio from the front of your venue, all the way to the back. For using in stereo the amplifier delivers 650W RMS per channel at 8 Ohms and 1000W RMS per channel at 4 Ohms; a suitable power for small to large sized complete PA systems. In bridged mode at 4 Ohms the amplifier generates 2600W RMS. This huge power means the amplifier can also integrate itself with larger touring rigs and installs where long throw, extremely high power audio is needed. 8 Ohms x 2: 650W RMS 4 Ohms x 2: 1000W RMS 8 Ohms Bridged: 1940W RMS 4 Ohms Bridged: 2600W RMS Class AB Technology Status and clip LEDs Thermal, overcurrent, DC and output short protect circuitry 2 x Speakon outputs 2 x XLR outputs to link other audio equipment 2 x XLR inputs Peak and protect LEDs Built-in switchable limiter Continuously variable speed fan Suitable for touring, rental and installation Stereo Power Output 8 Ohms x 2 650W RMS 4 Ohms x 2 1000W RMS Bridged Mono Output 8 Ohms 1940W RMS 4 Ohms 2600W RMS Inputs 2 x XLR Outputs 2 x XLR, 2 x Speakon Frequency Response 20Hz - 30KHz Topology Class H Sensitivity 0dBu (0.775Vrms) Input Impedance 20K Ohms Maximum Input Level 22dBu (9.7Vrms) Slew Rate >40V / us Crosstalk 100dB Protection Switchable Limiter, Thermal protect, Over-current protect, Output DC protect, Output short protect, Power on/off mute Display 4 segment LED Cooling Variable Speed Fan Dimensions 88 x 483 x 451mm Net Weight 21kg / 46.30lbs Gross Weight 23kg / 50.71lbs

Audiocenter K-DSP10 Active 10" Speaker The multi-functional cabinet design of the K-DSP series is suitable as both a PA and as a stage monitor in the rental and fixed installation market whether it be for background music, vocals, speech, instrumental performances and more.

The CPD2600 is part of Wharfedale Pro’s latest line of professional power amplifiers driving earth shaking audio from the front of your venue, all the way to the back. For using in stereo the amplifier delivers 650W RMS per channel at 8 Ohms and 1000W RMS per channel at 4 Ohms; a suitable power for small to large sized complete PA systems. In bridged mode at 4 Ohms the amplifier generates 2600W RMS. This huge power means the amplifier can also integrate itself with larger touring rigs and installs where long throw, extremely high power audio is needed.   8 Ohms x 2: 650W RMS 4 Ohms x 2: 1000W RMS 8 Ohms Bridged: 1940W RMS 4 Ohms Bridged: 2600W RMS Class AB Technology Status and clip LEDs Thermal, overcurrent, DC and output short protect circuitry 2 x Speakon outputs 2 x XLR outputs to link other audio equipment 2 x XLR inputs Peak and protect LEDs Built-in switchable limiter Continuously variable speed fan Suitable for touring, rental and installation   Stereo Power Output   8 Ohms x 2 650W RMS 4 Ohms x 2 1000W RMS Bridged Mono Output   8 Ohms 1940W RMS 4 Ohms 2600W RMS Inputs 2 x XLR Outputs 2 x XLR, 2 x Speakon Frequency Response 20Hz - 30KHz Topology Class H Sensitivity 0dBu (0.775Vrms) Input Impedance 20K Ohms Maximum Input Level 22dBu (9.7Vrms) Slew Rate >40V / us Crosstalk Signal to Noise >100dB Protection Switchable Limiter, Thermal protect, Over-current protect, Output DC protect, Output short protect, Power on/off mute Display 4 segment LED Cooling Variable Speed Fan Dimensions 88 x 483 x 451mm Net Weight 21kg / 46.30lbs Gross Weight 23kg / 50.71lbs  

JBL PRX918XLF 18-Inch Powered Subwoofer The JBL PRX918XLF subwoofer takes professional portable PA performance to a new level with advanced acoustics, DSP, & unrivaled power, durability, and control. This 18-inch powered subwoofer is built from the ground up to leverage JBL’s most advanced acoustic innovations. A next-generation driver—powered by an ultra-efficient Class D amplifier—delivers clear, defined bass with smooth low-frequency extension at maximum volume. The PRX918XLF’s class-leading DSP package, accessible via onboard LCD or the JBL Pro Connect app, includes 6-band parametric EQ for system tuning and nuanced tonal control, plus a lowpass filter and 20ms delay. The JBL Pro Connect app provides complete hardware and DSP control of up to 10 speakers; integrate with JBL EON ONE MK2, PRX ONE and EON700 systems, and allows users to access app-only functions including speaker snapshots and grouping. The PRX918XLF is designed to withstand the rigors of the road and is enclosed in an 18mm birch cabinet with optimized bracing for smooth low-frequency response and improved durability. Like with every JBL product, everything is reinforced by industry-leading test and validation protocols and backed by a seven-year warranty. The PRX900 Series is a versatile solution for DJs and bands, music venues, rental houses, corporate A/V providers, or anyone who needs durable professional systems that deliver powerful, room-filling sound in any portable or installed scenario.