Moulding position

Good day I am looking for a position in injection moulding Please see below my previous list of responsibilities. I have recently relocated back to Durban from Johannesburg. PRODUCTION / FACTORY MANAGER MANAGE ALL OPERATIONS INSIDE COMPANY. MANUFACTURING ALL YOUR REFLECTOR LENSES, ULTRASONIC WELDING OF BACKINGS ON LENSES AND DOUBLE SIDED TAPE INJECTION MOULDING SETTER DOING ALL MOULD CHANGES AND SETTINGS SO PRODUCTION IS UP TO SABS STANDARDS FACTORY MAINTENANCE GENERAL MAINTENANCE ON INJECTION MOULDING  MACHINES                                                         ULTRASONIC WELDING MACHINES, SLITTING MACHINES (DOUBLE SIDED TAPE) AND ALL GENERAL FACTORY MAINTENANCE                                                                                                                                                   PRODUCTION PLANNING  MAKING SURE THE RIGHT MOULDS ARE IN THE MACHINES AT THE RIGHT TIME                                MAKING SURE REQUIRED MONTHLY TARGETS ARE MET                                                               MATERIAL CONTROL  ORDERING OF MATERIALS TO ENSURE THERE IS ENOUGH  TO MEET MONTHLY PRODUCTION TARGETS I WAS ALSO RESPONSIBLE FOR RUNNING NIGHT SHIFT AND FOR THE DAILY OPENING AND CLOSING UP OF THE FACTORY. I am looking for a new opportunity in Durban. Please do not hesitate to contact me for any further information or for my detailed CV. Kind Regards, Wayne

A Johannesburg based plastic/ packaging manufacturing company is currently looking for a qualified and experienced Moulding Technician. Requirements: • N3 Mechanical / Electrical • Advanced Injection Moulding • 5 years working experience on injection moulding machines Should you meet the requirements for this position, please email your CV or fax to 865 - show phone - or visit our website www.hireresolve.co.za Correspondence will only be conducted with short listed candidates. Should you not hear from us within 3 days, please consider your application unsuccessful.

A Gauteng based plastic manufacturing company is currently looking for a qualified and experienced Moulding Technician. Requirements: • N3 Mechanical / Electrical • Advanced Injection Moulding • 5 years working experience on injection moulding machines Should you meet the requirements for this position, please email your CV or fax to 865 - show phone -. You can also contact Kelly/ Bianca on 215 - show phone - or alternatively visit our website on www.hireresolve.co.za. Correspondence will only be conducted with short listed candidates. Should you not hear from us within 3 days, please consider your application unsuccessful.

Requirements: • N3 Mechanical / Electrical • Advanced Injection Moulding Certificate • 5 years working experience on injection moulding machines Should you meet the requirements for this position, please email your CV or fax to 865 - show phone -. You can also contact Kelly/ Bianca on 215 - show phone - or alternatively visit our website on www.hireresolve.co.za. Correspondence will only be conducted with short listed candidates. Should you not hear from us within 3 days, please consider your application unsuccessful.

POSITION - Injection Moulding Machine Setter WIRQUIN, A manufacturer of innovative sanitary and plumbing equipment, has a vacancy for an experienced, self-motivated, and driven Plastic Machine Setter based in Uitenhage. AS SETTER, YOU I WILL BE EXPECTED TO: 1.) Apply Organisational Policies and Procedures 2.) Be responsible for re-setting activities on your shift on all Injection, compression, and ancillary equipment. 3.) Set machine settings to setup sheets, connecting water, hydraulics, and air feeds as required. 4.) Perform QA tests & inspections after every mould change or production start-up to ensure quality products 5.) Conduct pre-operating inspections to determine operational fitness and safety of the machines and the environment 6.) Apply quality procedures and standards to all areas of operating influence 7.) Ensure all process documentation relating to manufacturing is available, correct and aligned to re-setting KPI’s 8.) Ensure all production documentation relating to manufacturing is available and correctly completed for each shift 9.) Plan / prepare tooling for all processes / product changes within specified set-up times 10.) Identify / Initiate maintenance & mould repair work orders for moulds, machines & auxiliary equipment 11.) Participate in resolving all relevant Health, Safety and Environmental issues in the workplace 12.) Perform relevant routine First Line Preventative Maintenance according to defined checklists and safety standards 13.) Actively engage in continuous improvement practices 14.) Ensure area is clean and clear of tools, water hoses and other equipment when setup is done. 15.) Operate any machine / combination of machines at or below my current level 16.) Communicate any pertinent information on incoming and outgoing shift. Salary Market related Personal Character Team player Strong attention to Detail Good time management Problem solver skills Energetic Requirements Matric (Grade 12) (not negotiable) Experience in various raw materials Previous experience in the plastics field will be a distinct advantage. This position is shift based and week-end work will be required from time to time Should you meet the requirements and are ready for a new, fast-paced environment & challenge, we would love to hear from you. Please submit your CV to the HR Manager at – hr@wirquin.co.za The for the applications end at the close of business on the 03 of October 2021

A Johannesburg based manufacturing company is currently looking for a qualified and experienced Blow Moulding Technician. The minimum requirements include: • Fitter and Turner Trade Test • 5 – 7 years blow moulding experience. Should you meet the requirements for this position, please email your CV or fax to 865 - show phone -. You can also contact Bianca or Kelly on 215 - show phone - or alternatively visit our website on www.hireresolve.co.za. Correspondence will only be conducted with short listed candidates. Should you not hear from us within 3 days, please consider your application unsuccessful.

Job Position: Qualified Toolmaker - Equity Ref: 3628 Location: Port Elizabeth Salary: R25 000 to R30 000 per month commensurate with experience and qualification Qualifications / Requirements • Qualified Toolmaker with completed Trade Test (please send certificate with application) • Be able to TIG, MIG and / or gas weld • Minimum of 5 years experience within Toolmaker injection moulding industry essential • Overhead crane license and operation experience – transporting large moulds 20 to 45 tons highly advantageous • Shift work required • Ability to operate a computer • Willing to work flexible hours if required • Ability to work both independently and within a team environment • Good knowledge of safe operations and working with lifting equipment to its specific lifting capacity Key Performance Areas: • Ensure all tools and equipment are prepared and available for production when required • Repair and service tools in accordance with company guidelines • Flush and clean tools when removed from production • Report defects and repairs on the control document • Record modifications and guarantee sign off’s as per the procedure • Ensure new tools are numbered and a control document is available • Report defects and deviations to management • Follow safe work procedures at all times • Ensure all mould stay within the limits of the production limit sample standard • Ensure that all moulds are kept up to 5S standards Responsibility: Qualifications / Requirements • Qualified Toolmaker with completed Trade Test (please send certificate with application) • Be able to TIG, MIG and / or gas weld • Minimum of 5 years experience within Toolmaker injection moulding industry essential • Overhead crane license and operation experience – transporting large moulds 20 to 45 tons highly advantageous • Shift work required • Ability to operate a computer • Willing to work flexible hours if required • Ability to work both independently and within a team environment • Good knowledge of safe operations and working with lifting equipment to its specific lifting capacity Key Performance Areas: • Ensure all tools and equipment are prepared and available for production when required • Repair and service tools in accordance with company guidelines • Flush and clean tools when removed from production • Report defects and repairs on the control document • Record modifications and guarantee sign off’s as per the procedure • Ensure new tools are numbered and a control document is available • Report defects and deviations to management • Follow safe work procedures at all times • Ensure all mould stay within the limits of the production limit sample standard • Ensure that all moulds are kept up to 5S standards Salary: R25000 to 30000 Job Reference #: Qualified Toolmaker - Equity

Good day I am looking for a position as Factory / Production Supervisor. Please see below my previous list of responsibilities. I have recently relocated back to Durban from Johannesburg. PRODUCTION / FACTORY MANAGER MANAGE ALL OPERATIONS INSIDE COMPANY. MANUFACTURING ALL YOUR REFLECTOR LENSES, ULTRASONIC WELDING OF BACKINGS ON LENSES AND DOUBLE SIDED TAPE INJECTION MOULDING SETTER DOING ALL MOULD CHANGES AND SETTINGS SO PRODUCTION IS UP TO SABS STANDARDS FACTORY MAINTENANCE GENERAL MAINTENANCE ON INJECTION MOULDING  MACHINES                                                         ULTRASONIC WELDING MACHINES, SLITTING MACHINES (DOUBLE SIDED TAPE) AND ALL GENERAL FACTORY MAINTENANCE                                                                                                                                                   PRODUCTION PLANNING  MAKING SURE THE RIGHT MOULDS ARE IN THE MACHINES AT THE RIGHT TIME                                MAKING SURE REQUIRED MONTHLY TARGETS ARE MET                                                               MATERIAL CONTROL  ORDERING OF MATERIALS TO ENSURE THERE IS ENOUGH  TO MEET MONTHLY PRODUCTION TARGETS I WAS ALSO RESPONSIBLE FOR RUNNING NIGHT SHIFT AND FOR THE DAILY OPENING AND CLOSING UP OF THE FACTORY. I am looking for a new opportunity in Durban. Please do not hesitate to contact me for any further information or for my detailed CV. Kind Regards, Wayne

Requirements: Trade Test qualification Minimum 3 – 5 years’ experience working on Injection Moulding tools Preventative maintenance experience Ability to refurbish and conduct tool modifications Familiar with automotive sector requirements CV must include contactable reference details. Kindly submit your CV to: Marion@strategicplacements.co.za or phone 043 7212093

5 Years Sales experience in Plastic Injection Moulding Industry. Ability to add substantial growth in sales as well as adding value in the technical aspects of polymer and the conversion thereof. Must have a proven and successful track record in a sales position within a related environment. Should have qualifications in moulding processes and polymer materials. Professional & presentable interested persons should submit a current CV together with letter motivating your qualification for the position.

An Electrical Technician is needed for a reputable FMCG company situated in Gauteng. Minimum requirements for this position include: • National Diploma or N6 • Electrical or Millwright Trade Test • Minimum 5 years’ experience post qualifications • Blow moulding experience would be advantageous Should you meet the requirements for this position, please email your CV or fax to 865 - show phone -. You can also contact Kelly/ Bianca on 215 - show phone - or alternatively visit our website on www.hireresolve.co.za. Correspondence will only be conducted with short listed candidates. Should you not hear from us within 3 days, please consider your application unsuccessful.

An Electrical Technician is needed for a reputable FMCG company situated in Port Elizabeth. Minimum requirements for this position include: • National Diploma or N6 • Electrical or Millwright Trade Test • Minimum 5 years’ experience post qualifications • Blow moulding experience would be advantageous Should you meet the requirements for this position, please email your CV or fax to 865 - show phone -. You can also contact Kelly/ Bianca on 215 - show phone - or alternatively visit our website on www.hireresolve.co.za. Correspondence will only be conducted with short listed candidates. Should you not hear from us within 3 days, please consider your application unsuccessful.

A Millwright is needed for a large plastic manufacturing company situated in Gauteng. Minimum requirements for this position include: • N3 • Trade Test • At least 5 years’ injection moulding experience • PLC’s fault-finding experience • Hydraulics and Pneumatics Should you meet the requirements for this position, please email your CV or fax to 865 - show phone -. You can also contact Kelly/ Bianca on 215 - show phone - or alternatively visit our website on www.hireresolve.co.za Correspondence will only be conducted with short listed candidates. Should you not hear from us within 3 days, please consider your application unsuccessful.

My client is a world class manufacturing facility of automotive components. They seek to employ someone with a tertiary qualification in Engineering and a Minimum 4 years’ experience in automotive industry Must have Knowledge of FMEA, Control Plan, APQP, CAD package and must be able to read drawings Huge advantage: Experience in the injection moulding process, machines, robotics, and auxiliary equipment Experience in working with machinery up to a press capacity of 1700 tons TO APPLY SEND CV'S TO nicky@persnet.co.za WITH THE POSITION IN THE SUBJECT HEADING. emails with no cover page and no explanation will be deleted.

Machine Setter wanted - Injection & Compression Moulding technologies. Tasks will include but will not be limited to: Plan and prepare tooling and take responsibility for re-setting activities of equipment on your shift and complete tasks to set targets. Perform QA tests and inspections on first off and last offs. Conduct pre-operating inspections to determine operational fitness and safety of machines. Ensure all production documentation relating to manufacturing is available and correctly completed for each shift Actively engage in continuous improvement practices. Take responsibility for relevant operating tools and equipment and report on any problems experienced with these during the production process. Perform relevant routine First Line Maintenance according to defined checklists and safety standards. Operate any machine / combination of machines at or below my current level. Participate in departmental meetings in which shift feedback and improvement activities are discussed to reduce mould and machine break downs. This position requires a 3 shift pattern to be worked. Week-end Overtime will be required as needed. CV's to be e-mailed to (hr@wirquin.co.za) Job application closes on the 06th of November 2020 Pay rate R61 / hour.

An EME in Delmas is in the market for a production trainee. The incumbent must be a resident of Delmas, Mpumalanga JOB SUMMARY AND RESPONSIBILITIES Operating all the machines in the workshop e.g. Lathe, moulding machine etc. Compiling daily production paperwork e.g. timesheets, production output quantities Scheduling machine maintenance, perform quality checks on the products Keeping records of all maintenance carried out, orders received and deliveries of products done Compiling accident/ incident reports if required Compiling weekly and monthly reports for the team 's operations mainly highlighting various ways and recommendations needed to improve performance, efficiency and output Reporting to Production supervisor Requirements Electrical/ Mechanical engineering qualification N4-N6 Minimum experience(this is an entry level position) Willing to learn and grow within the organization Preference will be given to black women REMUNERATION A stipend of R4200 per month is being offered. To apply, please send your cv and qualifications to admin@macroeng.co.za no later than 21 July 2021