Audix instrument microphone

Audix - ADX20iP Condenser Instrument Microphone The ADX20iP is applicable for professional stage and studio applications. This mic is primarily used for miking most reed and brass instruments. The ADX20iP has a uniformly controlled cardioid polar pattern, which provides excellent isolation and feedback control on stage with natural sound reproduction at very close distances. The ADX20iP is lightweight, compact and simple to use. Included with the ADX20iP is a gooseneck clip with spring tension for easy mounting to the bell of an instrument. The ADX20i requires phantom power of 9-52 V.

Audix D6 Dynamic Instrument Microphone The D6 is used for stage, studio and broadcast applications. Designed with a cardioid pickup pattern for isolation and feedback control, the D6 is equipped with a VLM¿ diaphragm for natural, accurate sound reproduction. Lightweight, compact and easy to position, the D6 is an excellent choice for miking instruments requiring extended low frequency reproduction such as kick drums, large toms and bass cabinets. The D6s transformer less design, low impedance and balanced output allow for interference-free performance.

The Fusion Series are high performance microphones in a cost effective package. The f2 is best used for miking instruments requiring mid-bass and mid-high reproduction in live and studio applications. Its hypercardioid pick-up pattern helps to minimize feedback and isolate the instrument from ambient sound coming from the room or other instruments on stage.

The Fusion Series microphones, which are designed, assembled and tested by Audix in the USA, fulfill all the performance criteria required for professional stage and studio applications. These prepackaged sets of microphones offer convenience, quality, durability, and affordability. All mics come with high impact mic stand adapters and are packed in a heavy duty foam lined aluminum carrying case for safe keeping when the products are not in use.

With a wide frequency response of 40 Hz - 18 kHz and the ability to handle SPLs in excess of 144 dB, the D4 is an excellent choice for miking instruments requiring precise, low frequency reproduction such as large rack toms, floor toms, cajon, djembe, tympani, leslie bottom, bass flute, saxophone and baritone saxophone, trombone, acoustic bass, bass cabinets and small kick drums.

The D2 is used for stage, studio and broadcast applications. It is designed with a hypercardioid pickup pattern for isolation and feedback control and is equipped with a VLM diaphragm for natural, accurate sound reproduction.

Works with a wide variety of drums and hand percussion Locks firmly into position Durable and scratch resistant Eliminates bulky mic stands Works with most microphones Extra reach for miking inside kick drum The DFLEX is a wide jaw clip designed for drums and percussion, eliminating the need for bulky mic stands. The butterfly style clip allows for secure positioning on all types of rims and hand percussion surfaces. The DFLEX is equipped with a 5/8 inch threaded surface, which enables it to be used with any standard mic clip.

The PGA81 is an instrument microphone, specially designed for natural and nuanced reproduction of acoustic guitars and strings in sensitive environments. It is also a great overhead microphone for all instruments because it captures all details and colours of their sound. The PGA81 cardioid condenser instrument microphone is a professional quality flat-response microphone featuring highly durable design and construction that delivers excellent sound. Ideal for use in sensitive acoustic instrument performance and recording, the PGA81 comes with a swivel adapter, carrying pouch and XLR cable. Phantom power required. Specs: Flat-response microphone cartridge design for clear reproduction of acoustic instrument sound sources in more sensitive environments. Cardioid polar pattern picks up audio from the source while rejecting unwanted noise Updated industrial design with black metallic finish and grille for unobtrusive visual presence Available with XLR Cable (4.57 m) Stand adapter for mounting to a microphone stand Zipper pouch included for additional protection during storage or transport Legendary Shure quality design and construction for exceptional performance in rigorous environments Transducer Type: Condenser Polar Pattern: Cardioid Frequency Response: 40 Hz - 18 kHz Sensitivity (1 kHz): -48.5 dBV/Pa / 3,8 mV/Pa Weight: 186 g

Shure - SM57-X2U Multi-purpose Instrument Microphone The legendary SM57 cardioid dynamic instrument microphone is now available with the X2u USB Signal Adapter, which features built-in headphone monitoring with zero latency, and easy controls to balance microphone and playback audio. Digitally record wherever and whenever your computer takes you - just plug and play for better-than-CD quality instrument reproduction. X2u Overview: Plug and Play USB connectivity allows the convenience of digital recording anywhere your computer can go Integrated pre-amp with Microphone Gain Control allows control of input signal strength Zero Latency Monitoring for real-time playback and multi-tracking without disorientation More features below

The PG57 Cardioid Dynamic Instrument Microphone is a professional quality microphone designed with rugged durability and excellent sound for use in amplified and acoustic instrument applications. What is the PG57 best suited to? The PG57 is a versatile mic for use in amplified and acoustic instrument applications, such as on-stage or studio miking of guitar amps, brass instruments and saxophones. It is mainly used by amatuer/semi-pro musicians. How does the PG57 relate to the SM57? Its the entry level version of the popular SM57 and would be used for the same type of instrument applications. It has a dynamic cartridge with a cardioid polar pattern, a hardened steel mesh tapered grille that resists wear and abuse and has an on/off switch for onstage control. It also includes a 4.5 m cable.Transducer Type: Dynamic Polar Pattern: Cardioid Frequency Response: 50 Hz - 15 kHz Sensitivity (1 kHz): -56 dBV/Pa / 1,6 mV/Pa Weight: 324 g

Shure SM57 Instrument Microphone An industry standard for performance and recording, the versatile and rugged SM57 is an exceptional instrument microphone and vocal microphone. Handheld or mountable microphone for guitars, vocals, and other instruments in live sound and recording applications Dynamic cartridge with cardioid polar pattern Available with or without a cable Includes SM57, microphone clip, storage bag, and user guide

Sennheiser - E906 Instrument Microphone The cardioid e 906 instrument microphone was especially designed for guitar amps and is also excellent for percussion and horns. Professional super-cardioid, dynamic instrument mic. Versatile to handle drums, percussion, and guitar amplifiers. Switchable presence filter to tailor its sonic characteristics to different requirements.

Shure - SM94-LC Cardioid Condenser Instrument Microphone The SM94 is a unidirectional electret condenser microphone tailored to the instrument miking needs of professional musicians and sound engineers in both live performance and sound recording. Its smooth, flat frequency response is free of either a presence peak or a low-frequency rolloff, making it a perfect choice for all types of musical instruments. The SM94 is equally at home in sound reinforcement systems or in sound studios and motion picture/ TV scoring stages. When used with the optional wind-screen, the SM94 can be used by vocalists and speech-makers who desire a wide, flat response with minimum coloration.

Audio Technica - ATM250DE Dual-Element Instrument Microphone The ATM250DE dual-element instrument microphone features cardioid condenser and hypercardioid dynamic capsules combined in a single housing. Audio-Technica¿s innovative use of two polar patterns is ideal for kick drum: the hypercardioid dynamic element focuses tightly on the aggressive attack of the beater, while the condenser captures the round tonalities of the shell. The elements are positioned in a perfect phase relationship, something practically impossible to achieve with two separate microphones. Includes a professional isolation clamp to provide secure mounting, versatile positioning and effective dampening of unwanted mechanical noise.

The e 602 II is a cardioid instrument microphone especially suitable for use with bass drums, bass guitar cabs, tubas and other low frequency instruments Features Rugged, lightweight aluminium body for stable positioning on long microphone boom arms Lightweight high-performance voice coil construction Fast transient response Low frequency extension Ideal for direct use on the most problematic bass signal Frequency-independent directivity provides isolation from other on-stage signals Humbucking coil Integral stand mount Delivery Includes 1 e 602-II 1 pouch Instructions for useDimensions 60 x 153 mm Connector XLR-3 Transducer principle (Microphone) dynamic Frequency response Hz Weight 318 g Pick-up pattern cardioid Sensitivity in free field, no load (1kHz) 0,25 mV/Pa; (50 Hz) 0,9 mV/Pa Nominal impedance 350 Ω Min. terminating impedance Ω