3af poe telephony

Buy Planet 802.3af PoE SIP Analogue Telephony Adapter (ATA) - 2*RJ45 - T.38 FoIP for R2,036.21

Buy Planet IEEE802.3af PoE Splitter - End-Span for Gigabit Ethernet - 5V/12V for R532.63

Buy Planet Ultra mini Full HD Fixed Dome IP Camera, 802.3af POE, H.264/MPEG4/MJPEC, Full HD@30fps, W for R5,331.86

Description TP-Link TL-POE150S PoE Injector Adapter The TP-Link TL-POE150S PoE Injector Adapter fully complies with IEEE 802.3af standard and can work with all IEEE 802.3af PoE compliant PDs (Powered Devices) or PoE Receiver Adapters, such as TP-LINK’s TL-POE10R, or other equivalent product, to expand your network to where there are no power line or outlet, where you wish to fix device such as AP, IP Camera or IP Phone, etc.

IN STOCK at supplier. If ordered before 12PM: DELIVERED next day (main centres) or 2-3 days (regional areas or large items) COLLECTION from Geewiz available Same Day (approx 4pm) FEATURES FAN-I12 by Fanvil is an intelligent security SIP intercom with HD voice quality, waterproof IP65, anti-tamper housing and two short-circuit output interfaces, designed to prevent miss connections. PRODUCT SPECIFICATIONS Manufacturer Fanvil  Factory Number FAN-I12 Product Type VOIP Phone RJ45 Ethernet  x1 Network (802.3af PoE enabled), x1 LAN (Bridged to network) Main chipset Broadcom Passive switch (short-circuit output) Normally open and closed on highest 30V/1A AC/DC Audio amplifier 2.5W Output interface for active speaker  Audio recored interface 2x Embedded short circuit input interfaces / 2x Embedded short circuit output interfaces Speaker 2W  Cables CAT5 or better Power supply 9~16V / 1A DC or PoE Shell material Aluminium cover and back case Protection level IP65 and IK10  Dimension 195 x 120 x 29mm 

Please check stock availability before placing order Fanvil’s X3G IP Phone offers users a 2.4/2.8 inch (320x240) color LCD screen, and is easy to install and configure. It supports 2 SIP lines, EHS Wireless headsets and HD voice.  This product is supplied with no power supply and direct DC can be bought additional: 5V DC PSU Specifications: SIP Lines: 2 HD Voice POE Enabled  Handset(HS) / Hands-free(HF) / Headset(HP) / Mode (EHS supports for Plantronics headsets) Desktop / Wall-mount Installation LCD: 2.4/2.8 inch (320x240) Color-screen LCD Keypad: 32 Keys HD Hands-free Speaker (0 ~ 7KHz)  HD Hands-free Microphone (0 ~ 7KHz)  HD Handset (RJ9)  Standard RJ9 Handset Wire  1.5M CAT5 Ethernet Cable x1 RJ9 Phone Jacket x2: Handset x1, Headset x1 RJ45 Ethernet Jacket x2: Network x1 (802.3AF POE Class 1 Enabled), PC x1 (Bridged to Network)  

PoE injector by Tenda enables synchronous delivery of data and power via a single Ethernet cable (Cat.5 or better). The output power per port is up to 15W, which can serve as an outlet for a PoE device (powering via RJ45 port). You can connect the PoE15F to an IEEE 802.3af compliant device, such as a wireless AP, IP camera, IP phone, etc. Ideal for reducing installation cost and improving network performance.

Description Tenda PoE30G-AT Gigabit PoE injector The Tenda PoE30G-AT is the IEEE802.3 AT Gigabit PoE injector, which fully conforms to the standard of 802.3, transmitting power through Ethernet cable, the maximum transmission distance can reach 100 meters. The PoE injector has two Ethernet gigabit data ports and an output port combination of data and power. In addition, the device can be used for Ethernet device IEEE802.3af/ compatible PoE power applications such as wireless AP, VoIP phone and web CAM. The power supply of Ethernet cable not only provides system reliability, traditional power grid expansion but also simplifies the deployment of power lines. Features PoE ports support IEEE802.3at and IEEE802.3af standard Equipped with Gigabit port, blazing-fast transfer rate, the maximum transfer rate of up to 30W for a single port Power distance extension of up to 100 meters for the standard cat. 5e and Cat. 6 Ethernet cable Plug and play, no configuration required PoE Performance PoE ports support IEEE802.3at and IEEE802.3af standard Supports AT high power(30W) Power supply distance extension The standard cat’s power distance can be extended to 100 meters. The device can extend the range of PoE power over long distances, and simplify the deployment of power lines so that PD equipment can supply power. Gigabit blazing-fast delivery 10/100M/1000Mbps autosensing RJ45 port provides fast data delivery, supports wire-speed forwarding and MDI/MDIX, plug and play. Stable performance Adopts new chips solution, brings new performance experience, powerful data transfer and power Specifications Description PoE Injector Standard b'&' Protocol Compatible with IEEE802.3, IEEE802.3u, IEEE802.3ab, IEEE802.3af, IEEE802.3atStandard CSMA/CD, TCP/IP Features Support the powered devices compatible with IEEE802.3af、IEEE802.3at Standard Transmission range up to 100M Plug and play Port 1 GE port 1 datab'&'power output port supporting PoE Indicator PWR, PoE Dimension 131mm*60mm*33mm Power Output 30W Operation Temperature 0℃~40℃ Storage Temperature -40℃~70℃ Operating Humidity 10%~90% (noncondensing) Storage Humidity 5%~90% (noncondensing)

Tenda PoE30G-AT Gigabit PoE injector The Tenda PoE30G-AT is the IEEE802.3 AT Gigabit PoE injector, which fully conforms to the standard of 802.3, transmitting power through Ethernet cable, the maximum transmission distance can reach 100 meters. The PoE injector has two Ethernet gigabit data ports and an output port combination of data and power. In addition, the device can be used for Ethernet device IEEE802.3af/ compatible PoE power applications such as wireless AP, VoIP phone and web CAM. The power supply of Ethernet cable not only provides system reliability, traditional power grid expansion but also simplifies the deployment of power lines. Features PoE ports support IEEE802.3at and IEEE802.3af standard Equipped with Gigabit port, blazing-fast transfer rate, the maximum transfer rate of up to 30W for a single port Power distance extension of up to 100 meters for the standard cat. 5e and Cat. 6 Ethernet cable Plug and play, no configuration required PoE Performance PoE ports support IEEE802.3at and IEEE802.3af standard Supports AT high power(30W) Power supply distance extension The standard cat’s power distance can be extended to 100 meters. The device can extend the range of PoE power over long distances, and simplify the deployment of power lines so that PD equipment can supply power. Gigabit blazing-fast delivery 10/100M/1000Mbps autosensing RJ45 port provides fast data delivery, supports wire-speed forwarding and MDI/MDIX, plug and play. Stable performance Adopts new chips solution, brings new performance experience, powerful data transfer and power Specifications Description PoE Injector Standard b'&' Protocol Compatible with IEEE802.3, IEEE802.3u, IEEE802.3ab, IEEE802.3af, IEEE802.3atStandard CSMA/CD, TCP/IP Features Support the powered devices compatible with IEEE802.3af、IEEE802.3at Standard Transmission range up to 100M Plug and play Port 1 GE port 1 datab'&'power output port supporting PoE Indicator PWR, PoE Dimension 131mm*60mm*33mm Power Output 30W Operation Temperature 0℃~40℃ Storage Temperature -40℃~70℃ Operating Humidity 10%~90% (noncondensing) Storage Humidity 5%~90% (noncondensing)

Description Tenda 10/100Mbps POE Injector Tenda 10/100Mbps POE Injector PoE15F can realize the synchronous transmission of network data and power through an Ethernet cable (Cat.5 or better). The output power of each port is as high as 15W, which can be exported as PoE equipment (via RJ45 port). You can connect to ieee802.3af’s PD, such as wireless AP, IP camera, IP phone, etc. In a sense, reducing installation costs and improving network performance is a good choice. Features: Delivers power and data through one Ethernet cable for easy network extension Compatible with IEEE 802.3af compliant powered devices PoE Port Delivers power up to 100 meters Plug and Play, no configuration required Power Over Ethernet One PoE port to power connected devices for flexible network deployment IEEE 802.3af compliant Compatible with IEEE 802.3af compliant powered devices Extend Power Supply Distance of power transmission via Ethernet cable is up to 100 meters Plug and Play Hassle-free setup, no configuration required Specifications: Network standards IEEE802.3、IEEE802.3u LED Indicator Link/Act, PoE Status Interfaces 1*10/100 Base-TX Ethernet ports(Data/PoE) 1*10/100 Base-TX Ethernet ports(Data) Transmission media Recommended: CAT5/5e UTP or better Dimension 84.5mm*44mm*29.8 mm Level of protection ESD: Air discharge: ±10kV Contact discharge: ±8kV Forwarding mode Store-and-forward Transmission Rate 100Mbps PoE budget Single port: AF: 15.4W Whole device: 15W Power consumption 15W Input voltage 100－240V AC 50/60Hz 48V/0.3A DC（Power Adapter Output） Mounting Desktop mounting: support Environment Operating Temperature: 0℃~45℃ Storage Temperature: -40℃~70℃ Operating Humidity: 10%~90% non-condensing Storage Humidity: 5%~90% non-condensing Certification FCC、CE、RoHS b'/xc2/xa0' Why not browse our wide variety of Tenda Products HERE

Tenda 10/100Mbps POE Injector Tenda 10/100Mbps POE Injector PoE15F can realize the synchronous transmission of network data and power through an Ethernet cable (Cat.5 or better). The output power of each port is as high as 15W, which can be exported as PoE equipment (via RJ45 port). You can connect to ieee802.3af’s PD, such as wireless AP, IP camera, IP phone, etc. In a sense, reducing installation costs and improving network performance is a good choice. Features: Delivers power and data through one Ethernet cable for easy network extension Compatible with IEEE 802.3af compliant powered devices PoE Port Delivers power up to 100 meters Plug and Play, no configuration required Power Over Ethernet One PoE port to power connected devices for flexible network deployment IEEE 802.3af compliant Compatible with IEEE 802.3af compliant powered devices Extend Power Supply Distance of power transmission via Ethernet cable is up to 100 meters Plug and Play Hassle-free setup, no configuration required Specifications: Network standards IEEE802.3、IEEE802.3u LED Indicator Link/Act, PoE Status Interfaces 1*10/100 Base-TX Ethernet ports(Data/PoE) 1*10/100 Base-TX Ethernet ports(Data) Transmission media Recommended: CAT5/5e UTP or better Dimension 84.5mm*44mm*29.8 mm Level of protection ESD: Air discharge: ±10kV Contact discharge: ±8kV Forwarding mode Store-and-forward Transmission Rate 100Mbps PoE budget Single port: AF: 15.4W Whole device: 15W Power consumption 15W Input voltage 100－240V AC 50/60Hz 48V/0.3A DC（Power Adapter Output） Mounting Desktop mounting: support Environment Operating Temperature: 0℃~45℃ Storage Temperature: -40℃~70℃ Operating Humidity: 10%~90% non-condensing Storage Humidity: 5%~90% non-condensing Certification FCC、CE、RoHS b'/xc2/xa0' Why not browse our wide variety of Tenda Products HERE

FS-S1004EP-FS20 is specialized unmanaged PoE switch designed for video surveillance and network project system. Provides 4 x 100Mbps Ethernet ports and 2 x 100Mbps uplink ports, supports VLAN function, can effectively prevent the whole system from a broadcast storm so that make the data transfer safer. PoE network switch can meet customers general demands.PoE network switch with PoE function, designed for high-definition network cameras￢ﾀﾙ internet access. Provides 4 100Mbps PoE Ethernet switches, complies with IEEE802.3AF/AT standards and also simplifies wiring, avoids the troublesome of installing power socket for powered devices. FEATURES Provide 4 x 100Mbps Ethernet ports and 2 x 100Mbps uplink ports Support end-span method complies with IEEE802.3AF/AT standards, can supply max 30W power which is possible to power high-power infrared cameras Compliant with IEEE802.3, IEEE802.3u, IEEE802.3AF/AT standards Support IEEE802.3x full-duplex flow control, support auto MDI/MDIX Support port-base Vlan, prevent from broadcast storm so that make data conversion more efficient and safe Restart function helps master IC reset wholly, easy for users to solve network failure without swapping power supply, easy to maintain system; Help to monitor pictures recover quickly Various LED display functions can real-timely display the device￢ﾀﾙs current working conditions, and help prompt facility and remove trouble easily Excellent lightning protection, lightning capacity up to 4K Easy to install and operate on walls

Samsung Ubigate iES Series Ethernet workgroup switches are a perfect solution for todays IP Telephony environments with low TCO, simple management, and highest stability. This series provide reliable and powerful solutions as well as lower network cost to generate revenue. Enjoy wide range of multiservice business gateways.Samsung iES Series Ethernet Switch family provides wire speed Fast Ethernet PoE/Non-PoE switching for iESFP and iESF, and Gigabit Ethernet switching for iESGP with features targeted for voice and high quality video over IP. They provide 4 Gigabit ports as well, showing high price/performance ratio. Their IP clustering feature allows up to 36 switches to be managed in a logical group using a single IP address. Advanced QoS features are provided to minimize latency and give priority for voice and video packets.Highest Gigabit Port DensityUp to Gigabit Uplink Ethernet Ports supported in 1RU Chassis (iESFP, iESF)IEEEafIEEEaf Power over Ethernet supported in all the access ports (iESFP, iESGP)IP ClusteringUp to 36 switches can be managed in a single logical group using a single IP addressGVRP and Voice LANSupports Q and port-based VLAN, Dynamic VLAN supported through GVRP. Voice VLAN can provide best QoS for IP telephony automatically.IGMP SnoopingCan save bandwidth and improve throughput by sending multicast traffic only to ports with registered multicast group members.MultiLink Trunking through LACPCan bundle multiple Ethernet Ports to provide bigger bandwidth pipe.Comprehensive SecurityL2~L4 ACL, Radius, TACACS+, SSH, SLI, x based Port Security, DHCP SnoopingSpecifications:Ports BASE-T ports with PoE BASE-T ports2 Gigabit Combo ports1 Console portSwitching Capacities12.8 GbpsForwarding Rate9.5 MppsWeight 4.13 kg 9.11 lbsDimension4.3 x 44 x 33 cm 1.7 x 17.3 x inchAC Input100 to 240V, HzPower Consumption225W (System 45W, PoE 225W)Power-over-EthernetMaximum output power per port:15.4WMaximum output power per port: 7.5W simultaneouslyNetwork Interface BASE-T ports BASE-T ports

Trendnet TPE-S44. Switch type: Unmanaged. Copper ethernet cabling technology: 100Base-TX, 10Base-T. Networking standards: IEEE 802.3, IEEE 802.3af. Supported data transfer rates: 10/100 Mbps, Maximum data transfer rate: 0.1 Gbit/s. Colour of product: Blue, Certification: FCC, CE TPE-S44 8-Port Smart Switch integrates Power over Ethernet (PoE) and network management features into a cost effective and scalable solution. The TPE-S44 reduces equipment cost by delivering data and power over existing network cable infrastructure. -Reduces equipment cost by delivering data and power over existing network cables. -4 PoE and 4 standard 10/100Mbps ports. -Flow Control for Full-Duplex mode. -IEEE 802.3af Power over Ethernet (PoE) Standard Compliant. -8 x 10/100Mbps Auto-Negotiation and Auto-MDIX Fast Ethernet RJ45 Ports. -Built-in 4 PoE Ports (Port 1 ~ Port 4). -Supports PoE Power Maximum 15.4 watts for each POE port. -Supports PoE Powered Device (PD) classification identify. -Full Wire-Speed Non-Blocking Reception and Transmission. -Store and Forward Switching Method. -96Kbytes RAM Data Buffer and 1K entries MAC Address Table. -Extensive Diagnostic LED´s on the Front Panel. -IEEE 802.3x Flow Control for Full-Duplex Mode; Back Pressure Flow Control for Half-Duplex Mode. -5-year limited warranty.

24 pieces 10M/100Mbps PoE ports 2 pieces 100M network port (RJ45) 2 pieces SFP 100/1000Mbps ports IEEE802.3 AF/AT standard                                               Supports IPC and AP power supply Data and power supply over 100Meters 16.6W for each port output, total 400W Enough power to supports almost all of IPC Backplane bandwidth: 100M Transmit distance: ≤100M Power Supply: 400W/52V/7.7A Advantages: 16 port PoE switch, specially designed to meet the POE power supply demand and independent innovation R and D design of Gigabit uplink POE switch, using the latest high-speed Ethernet switch chip, occupied 16 port POE power supply, 2 Gigabit RJ45 port and 2 SFP fiber module expansion slots, at the meanwhile, support the simultaneous use of 4 port gigabit uplink All of 16-port are supports IEEE802.3AF/AT standard POE power supply, each port max Power supply reached 30W, whole ports max Power supply reached 400W Can be detected PD electric equipment automatically and priority mechanism power supply through network cable which fit IEEE802.3AF/AT standard   Excellent port performances: 1. Supply 16 10/100Mbps adaptive high speed forwarding data packet non-lost port 2. Supply 2 10/100/1000Mpbs RJ45 port, meet the fiber optic network seamless 3. Supply 2 SFP 10/100/1000Mpbs fiber optic module to expand the slot port, collocation uses SFP fiber module 4. Easily connect to optical fiber backbone network 5. Each port is supported by MDI/MDIX auto flip and self-negotiation 6. Supports IEEE802.3x flow control for Full-duplex mode and backpressure for half-duplex mode