Poe standard

Barely used for 2 Voip Phones. The CNP-POEI is a Power over Ethernet Injector which can Inject power into a non-powered eternet cable and deliver Electrical Current to PoE compliant devices such as APs, IP Cameras or IP Phones, where there are no power lines or outlets available. It fully complies with IEEE af standard, and can work with all IEEE af PoE compliant PDs (Powered Devices) or PoE reciever adapters, such as Canyon’s CNP-POES. The instalation is very simple (Plug-and-play), and there is no configuration or software required. IEEE af compliant PoE Injector Delivers power up to 100 meters Auto-determine the necessary power requirements Plug-and-Play, no configuration required External power adapter supply  

The CNP-POEI is a Power over Ethernet Injector which can Inject power into a non-powered eternet cable and deliver Electrical Current to PoE compliant devices such as APs, IP Cameras or IP Phones, where there are no power lines or outlets available. It fully complies with IEEE af standard, and can work with all IEEE af PoE compliant PDs (Powered Devices) or PoE reciever adapters, such as Canyon’s CNP-POES. The instalation is very simple (Plug-and-play), and there is no configuration or software required. IEEE af compliant PoE Injector Delivers power up to 100 meters Auto-determine the necessary power requirements Plug-and-Play, no configuration required External power adapter supply  

This 4 port 10/100Mbps PoE switch is with 48V/1.25A external power,it provides an easier installation way for PoE devices,such as IP cameras,wireless AP,VoIP. And it can detect your PoE devices according to PoE standard.So the users do not need to worry about the PoE switch will damage their PoE devices. The max transmission distance is 100 meters with Cat5 cables. Ideally,shorter cable would reduce the power degradation over the cables; with high quality cables also can reduce power loss.Plug & play design make the installation quite easy,users do not need any configuration,which make this PoE switch a very good choice for IP cameras,wireless AP,VoIP users. IEEE 802.3af Power over Ethernet PoE compliant. Supports 10/100Mbps fast Ethernet. 48V/1.25A External power supply. Max power for single PoE port is 15.4W. Automatically detects the PoE class level of a Powered Device. 1Gbps bandwidth. Store-and-forward switching method. Plug and Play. General Quantity 1 piece Material ABS + metal Other Features Other Features Standards and protocols the IEEE 802.3 standard The IEEE 802.3 u 100 base - TX The IEEE 802.3 ab 1000 base-t The IEEE 802.3 af power Ethernet (POE) IEEE 802.3 x flow control Interface port 4 * 100 m POE (automatic negotiation, auto-mdix) Port 5 is a 10/100 MBPS uplink port Data transfer rate Ethernet: 10/100 Mbps (half/full duplex) Forward rate 148800 100 Mbps/polyphenylene sulfide (PPS)/polyphenylene sulfide (PPS), 10 Mbps, 14880 Power input: 100 ~ 50/60 V/Hz 48 v / 1.25 A external force DC48V The power supply pins (36 (12):) The index of electric power, POE/activities, link Environmental operating temperature: 0 to 40 Storage temperature: 40-70 Working humidity: 10% to 90%, without condensation Store humidity: 5% to 5%, without condensation Dimensions & Weight Dimensions 7.87 in x 7.09 in x 1.57 in (20 cm x 18 cm x 4 cm) Weight 17.64 oz (500 g) Packing List 1 * PoE switch 1 * Adapter(1m) 2 * Accessories

Trendnet TPE-S44. Switch type: Unmanaged. Copper ethernet cabling technology: 100Base-TX, 10Base-T. Networking standards: IEEE 802.3, IEEE 802.3af. Supported data transfer rates: 10/100 Mbps, Maximum data transfer rate: 0.1 Gbit/s. Colour of product: Blue, Certification: FCC, CE TPE-S44 8-Port Smart Switch integrates Power over Ethernet (PoE) and network management features into a cost effective and scalable solution. The TPE-S44 reduces equipment cost by delivering data and power over existing network cable infrastructure. -Reduces equipment cost by delivering data and power over existing network cables. -4 PoE and 4 standard 10/100Mbps ports. -Flow Control for Full-Duplex mode. -IEEE 802.3af Power over Ethernet (PoE) Standard Compliant. -8 x 10/100Mbps Auto-Negotiation and Auto-MDIX Fast Ethernet RJ45 Ports. -Built-in 4 PoE Ports (Port 1 ~ Port 4). -Supports PoE Power Maximum 15.4 watts for each POE port. -Supports PoE Powered Device (PD) classification identify. -Full Wire-Speed Non-Blocking Reception and Transmission. -Store and Forward Switching Method. -96Kbytes RAM Data Buffer and 1K entries MAC Address Table. -Extensive Diagnostic LED´s on the Front Panel. -IEEE 802.3x Flow Control for Full-Duplex Mode; Back Pressure Flow Control for Half-Duplex Mode. -5-year limited warranty.

D-Link DGS-P 8-Port PoE | DGS-P/E Brand New & Sealed * Original Product * Valid Manufacturer's Guarantee * Fast Delivery D-Link Product Code: DGS-P/E Availability: 47 in Stock Plug and Play operation Gigabit speed Fanless, silent operation to fit in any environment Safety function to prevent PoE overloads, protects both the switch and the connected PoE devices Cable diagnostics function to help troubleshoot wiring problems Green Ethernet technology, saves energy and increases the product's lifespan Overview The DGS-P PoE Gigabit Desktop switch provides a cost-effective way for SOHO and SMB to benefit from the Power over Ethernet (PoE) technology by allowing users to power up devices such as wireless access points, network cameras or IP phones directly from the network cables. The DGS-P is equipped with Gigabit ports for faster speeds, and integrates D-Link's Green Ethernet technology to save power when the switch is not in use. Its fanless design makes it completely silent so it is ideal for offices, libraries or meeting rooms. The first four ports of the DGS-P support the IEEE af PoE standard. Each of these four ports can supply up to 15.4 Watts, making it a very convenient solution for applications that are far away from power outlets, or when it is necessary to minimize the clutter of extra power supplies. The switch will automatically detect the power that a connected PoE device requires so no configuration is needed. A failsafe mechanism will cut off the power in case of an unexpected PoE overload, protecting both the switch and the connected device. Every time the DGS-P is powered up, it runs a micro diagnostics routine to check the integrity of the connected Ethernet cables. If a failure is detected, the switch will flag it by means of its front panel LEDs, making it easy for the user to troubleshoot wiring problems. Despite being an unmanaged, Plug and Play switch, the DGS-P is able to classify network traffic by assessing the existing p and DSCP fields in the Ethernet frames and IP packets respectively, and forward them out of its ports depending on their priority. This allows for a smooth integration of video, voice and data traffic without delays or loss of quality. The DGS-P is part of D-Link Green, D-Link's eco-friendly technology, providing energy savings, reduced power consumption, and a longer product lifespan without sacrificing operational performance or functionality. This switch implements the Green Ethernet technology, which can save a substantial amount of energy by detecting the connected cable lengths, adjusting the power accordingly; and the port status, putting them in low-power, stand-by mode when no network traffic is detected. Thanks to these power reductions, D-Link has been able to remove the fans in the DGS-P's design, making it completely silent and dramatically increasing its lifespan. Specifications Product Description D-Link DGS-P 8-Port PoE Gigabit Desktop Switch - switch - 8 ports - unmanaged - desktop Device Type Switch - 8 ports - unmanaged Enclosure Type Desktop Subtype Gigabit Ethernet Ports 4 x (PoE) + 4 x Power Over Ethernet (PoE) PoE MAC Address Table Size 4K entries Features Flow control, full duplex capability, auto-negotiation, auto-uplink (auto MDI/MDI-X), packet filtering, store and forward, Quality of Service (QoS), Jumbo Frames support, Green Ethernet, Cable Diagnostics Function Compliant Standards IEEE , IEEE u, IEEE ab, IEEE p, IEEE af, IEEE x Dimensions (WxDxH) 19 cm x 12 cm x 3.8 cm Delivery & FAQ's * Metropolitan Areas - Delivery of this item within 3 business days after payment reflects * Outlying Areas - Please allow 5 business days after payment reflects for delivery of this item This item carries a vaild manufacturers warranty/guarantee. Manufacturer's Code: DGS-P/E D-Link

D-Link DGS-P 8-Port PoE | DGS-P/E Brand New & Sealed * Original Product * Valid Manufacturer's Guarantee * Fast Delivery D-Link Product Code: DGS-P/E Availability: 68 in Stock Plug and Play operation Gigabit speed Fanless, silent operation to fit in any environment Safety function to prevent PoE overloads, protects both the switch and the connected PoE devices Cable diagnostics function to help troubleshoot wiring problems Green Ethernet technology, saves energy and increases the product's lifespan Overview The DGS-P PoE Gigabit Desktop switch provides a cost-effective way for SOHO and SMB to benefit from the Power over Ethernet (PoE) technology by allowing users to power up devices such as wireless access points, network cameras or IP phones directly from the network cables. The DGS-P is equipped with Gigabit ports for faster speeds, and integrates D-Link's Green Ethernet technology to save power when the switch is not in use. Its fanless design makes it completely silent so it is ideal for offices, libraries or meeting rooms. The first four ports of the DGS-P support the IEEE af PoE standard. Each of these four ports can supply up to 15.4 Watts, making it a very convenient solution for applications that are far away from power outlets, or when it is necessary to minimize the clutter of extra power supplies. The switch will automatically detect the power that a connected PoE device requires so no configuration is needed. A failsafe mechanism will cut off the power in case of an unexpected PoE overload, protecting both the switch and the connected device. Every time the DGS-P is powered up, it runs a micro diagnostics routine to check the integrity of the connected Ethernet cables. If a failure is detected, the switch will flag it by means of its front panel LEDs, making it easy for the user to troubleshoot wiring problems. Despite being an unmanaged, Plug and Play switch, the DGS-P is able to classify network traffic by assessing the existing p and DSCP fields in the Ethernet frames and IP packets respectively, and forward them out of its ports depending on their priority. This allows for a smooth integration of video, voice and data traffic without delays or loss of quality. The DGS-P is part of D-Link Green, D-Link's eco-friendly technology, providing energy savings, reduced power consumption, and a longer product lifespan without sacrificing operational performance or functionality. This switch implements the Green Ethernet technology, which can save a substantial amount of energy by detecting the connected cable lengths, adjusting the power accordingly; and the port status, putting them in low-power, stand-by mode when no network traffic is detected. Thanks to these power reductions, D-Link has been able to remove the fans in the DGS-P's design, making it completely silent and dramatically increasing its lifespan. Specifications Product Description D-Link DGS-P 8-Port PoE Gigabit Desktop Switch - switch - 8 ports - unmanaged - desktop Device Type Switch - 8 ports - unmanaged Enclosure Type Desktop Subtype Gigabit Ethernet Ports 4 x (PoE) + 4 x Power Over Ethernet (PoE) PoE MAC Address Table Size 4K entries Features Flow control, full duplex capability, auto-negotiation, auto-uplink (auto MDI/MDI-X), packet filtering, store and forward, Quality of Service (QoS), Jumbo Frames support, Green Ethernet, Cable Diagnostics Function Compliant Standards IEEE , IEEE u, IEEE ab, IEEE p, IEEE af, IEEE x Dimensions (WxDxH) 19 cm x 12 cm x 3.8 cm Delivery & FAQ's * Metropolitan Areas - Delivery of this item within 3 business days after payment reflects * Outlying Areas - Please allow 5 business days after payment reflects for delivery of this item This item carries a vaild manufacturers warranty/guarantee. Manufacturer's Code: DGS-P/E D-Link

Planet FNSW-P 16 Port af PoE Switch can easily accommodate a powerful, centrally-controlled IP phone system, IP camera system or Wireless AP deployment to enable roaming. Specifications: Network Connector: 16-Port RJ-45 for Base-TX, PoE Inject Port: 16, LED: System -Power (Green), Per port - PoE (Orange), LNK/ACT (Green), Switch Architecture: Store and Forward, MAC Address: 8K MAC address table with Auto learning function, Switch Fabric: 3.2Gbps, Switch Throughput: 2.38Mpps @ 64Bytes, Power Requirement: AC V, Hz, 2A max., Power Consumption: Max.135 Watts / 460 BTU, PoE Standard: IEEE af Power over Ethernet, PoE Power Supply Type: Mid-Span, PSE, PoE Power Output: Per Port 48V DC, 350mA. Max. 15.4 Watts, Power Pin Assignment: (+), PoE Power Budget: 125 Watts, Operating environment: 0 ~ 50 Degree C, Storage environment: - Degree C, Operating Humidity: 5 ~ 95%, relative humidity, non-condensing, Storage Humidity: 5 ~ 95%, relative humidity, non-condensing, Dimensions (W x D x H): 445 x 207 x 45 mm (1U height), Weight: 2.33kg

Description Tenda PoE30G-AT Gigabit PoE injector The Tenda PoE30G-AT is the IEEE802.3 AT Gigabit PoE injector, which fully conforms to the standard of 802.3, transmitting power through Ethernet cable, the maximum transmission distance can reach 100 meters. The PoE injector has two Ethernet gigabit data ports and an output port combination of data and power. In addition, the device can be used for Ethernet device IEEE802.3af/ compatible PoE power applications such as wireless AP, VoIP phone and web CAM. The power supply of Ethernet cable not only provides system reliability, traditional power grid expansion but also simplifies the deployment of power lines. Features PoE ports support IEEE802.3at and IEEE802.3af standard Equipped with Gigabit port, blazing-fast transfer rate, the maximum transfer rate of up to 30W for a single port Power distance extension of up to 100 meters for the standard cat. 5e and Cat. 6 Ethernet cable Plug and play, no configuration required PoE Performance PoE ports support IEEE802.3at and IEEE802.3af standard Supports AT high power(30W) Power supply distance extension The standard cat’s power distance can be extended to 100 meters. The device can extend the range of PoE power over long distances, and simplify the deployment of power lines so that PD equipment can supply power. Gigabit blazing-fast delivery 10/100M/1000Mbps autosensing RJ45 port provides fast data delivery, supports wire-speed forwarding and MDI/MDIX, plug and play. Stable performance Adopts new chips solution, brings new performance experience, powerful data transfer and power Specifications Description PoE Injector Standard b'&' Protocol Compatible with IEEE802.3, IEEE802.3u, IEEE802.3ab, IEEE802.3af, IEEE802.3atStandard CSMA/CD, TCP/IP Features Support the powered devices compatible with IEEE802.3af、IEEE802.3at Standard Transmission range up to 100M Plug and play Port 1 GE port 1 datab'&'power output port supporting PoE Indicator PWR, PoE Dimension 131mm*60mm*33mm Power Output 30W Operation Temperature 0℃~40℃ Storage Temperature -40℃~70℃ Operating Humidity 10%~90% (noncondensing) Storage Humidity 5%~90% (noncondensing)

Tenda PoE30G-AT Gigabit PoE injector The Tenda PoE30G-AT is the IEEE802.3 AT Gigabit PoE injector, which fully conforms to the standard of 802.3, transmitting power through Ethernet cable, the maximum transmission distance can reach 100 meters. The PoE injector has two Ethernet gigabit data ports and an output port combination of data and power. In addition, the device can be used for Ethernet device IEEE802.3af/ compatible PoE power applications such as wireless AP, VoIP phone and web CAM. The power supply of Ethernet cable not only provides system reliability, traditional power grid expansion but also simplifies the deployment of power lines. Features PoE ports support IEEE802.3at and IEEE802.3af standard Equipped with Gigabit port, blazing-fast transfer rate, the maximum transfer rate of up to 30W for a single port Power distance extension of up to 100 meters for the standard cat. 5e and Cat. 6 Ethernet cable Plug and play, no configuration required PoE Performance PoE ports support IEEE802.3at and IEEE802.3af standard Supports AT high power(30W) Power supply distance extension The standard cat’s power distance can be extended to 100 meters. The device can extend the range of PoE power over long distances, and simplify the deployment of power lines so that PD equipment can supply power. Gigabit blazing-fast delivery 10/100M/1000Mbps autosensing RJ45 port provides fast data delivery, supports wire-speed forwarding and MDI/MDIX, plug and play. Stable performance Adopts new chips solution, brings new performance experience, powerful data transfer and power Specifications Description PoE Injector Standard b'&' Protocol Compatible with IEEE802.3, IEEE802.3u, IEEE802.3ab, IEEE802.3af, IEEE802.3atStandard CSMA/CD, TCP/IP Features Support the powered devices compatible with IEEE802.3af、IEEE802.3at Standard Transmission range up to 100M Plug and play Port 1 GE port 1 datab'&'power output port supporting PoE Indicator PWR, PoE Dimension 131mm*60mm*33mm Power Output 30W Operation Temperature 0℃~40℃ Storage Temperature -40℃~70℃ Operating Humidity 10%~90% (noncondensing) Storage Humidity 5%~90% (noncondensing)

24 pieces 10M/100Mbps PoE ports 2 pieces 100M network port (RJ45) 2 pieces SFP 100/1000Mbps ports IEEE802.3 AF/AT standard                                               Supports IPC and AP power supply Data and power supply over 100Meters 16.6W for each port output, total 400W Enough power to supports almost all of IPC Backplane bandwidth: 100M Transmit distance: ≤100M Power Supply: 400W/52V/7.7A Advantages: 16 port PoE switch, specially designed to meet the POE power supply demand and independent innovation R and D design of Gigabit uplink POE switch, using the latest high-speed Ethernet switch chip, occupied 16 port POE power supply, 2 Gigabit RJ45 port and 2 SFP fiber module expansion slots, at the meanwhile, support the simultaneous use of 4 port gigabit uplink All of 16-port are supports IEEE802.3AF/AT standard POE power supply, each port max Power supply reached 30W, whole ports max Power supply reached 400W Can be detected PD electric equipment automatically and priority mechanism power supply through network cable which fit IEEE802.3AF/AT standard   Excellent port performances: 1. Supply 16 10/100Mbps adaptive high speed forwarding data packet non-lost port 2. Supply 2 10/100/1000Mpbs RJ45 port, meet the fiber optic network seamless 3. Supply 2 SFP 10/100/1000Mpbs fiber optic module to expand the slot port, collocation uses SFP fiber module 4. Easily connect to optical fiber backbone network 5. Each port is supported by MDI/MDIX auto flip and self-negotiation 6. Supports IEEE802.3x flow control for Full-duplex mode and backpressure for half-duplex mode      

Standards IEEE 802.3 10Base-T Ethernet IEEE 802.3u 100Base-TX Fast Ethernet IEEE 802.3x flow control IEEE 802.3af IEEE 802.3at protocol CSMA/CD Transmission Rate Ethernet 10Mbps (half duplex),20Mbps (full duplex); 10BASE-T:14,880pps/port Fast Ethernet 100Mbps (half duplex),200Mbps (full duplex); 100BASE-TX:148800pps/port Topology Star Network Medium 10Base-T:Cat 3 or above Cat.3 UTP(≤100m) 100Base-TX:Cat 5 UTP(≤100) Number of Ports 5 10/100M RJ45 ports POE Number of Ports 8 POE Port UPLINK 1 Up-link port !!!!!!!!!!!!!!!!!! CLICK HERE FOR MORE DEALS !!!!!!!!!!!!

Specifications Standard & Protocol: IEEE 802.3, IEEE 802.3u, IEEE 802.3x, IEEE802.3ab, IEEE 802.3af, IEEE 802.3at MTBF: 50,000 hours (about 5 years) Indicator: Link/Act, PoE Status, Power, 100M Fixed Port: 8x 10/100Base-TX RJ45 Ports (Data/Power) Fixed Port: 1x 10/100Base-TX RJ45 Port (Data) Lightning Protection: 6KV Wire-speed forwarding: Supported Switching Capacity: 1.8 Gbit/s MAC Address Table: 4K MAC PoE supply management - Ports 1 to 8 support standard IEEE802.3at/af power (maximum power for each port is 30W)PoE power type is end-span (1245+, 3678- line pair) in full configuration - PoE Max Power Supply58W Input Voltage AC100240V 50/60Hz Input Voltage DC51V /1.25A Power Adapter Operating Temperature: 0~40 Storage Temperature: -40~70 Operating Humidity: 10%~90% non-condensing Storage Humidity: 5%~90% non-condensing Dimensions: 177.5mm x 104mm x 26mm (W D H)

Description M-Link 4 PORT 10/100 POE + 1 LAN Switch 4 PORT 10/100 POE + 1 LAN – TXE104 b'/xc2/xa0' 5 PORT 10/100 POE – TXE104 Hardware Specifications Network Connector: 5-port RJ45 for 10/100BASE-TX, auto MDI/MDIX PoE Inject Port: 4-port with 802.3af/at PoE injector function (Port 1 to Port 4) LED Display: System Power (Green) Per PoE port: PoE (Red/Blue, Port 1 to Port 4) LNK/ACT (Green, Port 1 to Port 5) DIP Switch: Standard mode for 100M Extend mode for 250m (Based on the cable category) Switch Architecture: Store and Forward switch architecture MAC Address Table: 1K MAC address table with auto learning function EST Protection: 4KV Switch Fabric: 1Gbps Switch Throughput: 0.74Mpps @64bytes Maximum Packet Size: 1536bytes b'/xc2/xa0'

M-Link 4 PORT 10/100 POE + 1 LAN Switch 4 PORT 10/100 POE + 1 LAN – TXE104 b'/xc2/xa0' 5 PORT 10/100 POE – TXE104 Hardware Specifications Network Connector: 5-port RJ45 for 10/100BASE-TX, auto MDI/MDIX PoE Inject Port: 4-port with 802.3af/at PoE injector function (Port 1 to Port 4) LED Display: System Power (Green) Per PoE port: PoE (Red/Blue, Port 1 to Port 4) LNK/ACT (Green, Port 1 to Port 5) DIP Switch: Standard mode for 100M Extend mode for 250m (Based on the cable category) Switch Architecture: Store and Forward switch architecture MAC Address Table: 1K MAC address table with auto learning function EST Protection: 4KV Switch Fabric: 1Gbps Switch Throughput: 0.74Mpps @64bytes Maximum Packet Size: 1536bytes b'/xc2/xa0'

Planet POE--Port af PoE Injector is a 4-Port IEEE af Power over Ethernet injector hub. Equipped with Base-TX Fast Ethernet ports, the POE-400 supports full 48VDC power for any remote IEEE af powered devices, such as Wireless LAN Access Points, IP phones and LAN Cameras. Supporting power supply of 70 watts, the POE-400 provides sufficient power to the 4 remote devices. There are 8 RJ-45 STP ports on the POE-400. Half of the ports on the right panel function as "Data" and the other half on the left panel function as "Data and Power". Each of the "Data and Power" ports is an injector that inserts DC Voltage into the CAT 5 cable allowing the cable between the Injector and Splitter to transfer data and power simultaneously. Specifications: Ethernet Connector: 8-Port RJ-45 STP with 4-Port "Data" & 4-Port "Data & Power", Ethernet Data Rate: Mbps (vary on Ethernet device attached), Input Voltage: DC 48V, 1.5A, Number of Devices that can be powered: 4, Ethernet Cable: TIA/EIA-568, Category 5/5e cable, LED Indicator: 1 x power, 4 x PoE ready / in-use, Operating Temperature: 0ºC ~ 50ºC, Storage Temperature: -20ºC ~ 70ºC, Humidity: 5% ~ 90% RH, Emission: FCC Class B, CE mark, Standard Compliance: iEEE Ethernet; IEEE u Fast Ethernet; IEEE af Power over Ethernet, Dimensions: HxWxD: 26 x 70 x 97 mm, Weight: 220g

Description TP-Link TL-POE150S PoE Injector Adapter The TP-Link TL-POE150S PoE Injector Adapter fully complies with IEEE 802.3af standard and can work with all IEEE 802.3af PoE compliant PDs (Powered Devices) or PoE Receiver Adapters, such as TP-LINK’s TL-POE10R, or other equivalent product, to expand your network to where there are no power line or outlet, where you wish to fix device such as AP, IP Camera or IP Phone, etc.

The Yealink T21P E2 sets a new standard in the entry-level IP phone market. By making use of high quality materials and offering features such as a large 132x64 pixel LCD backlight display, dual 10/100Mbps Ethernet ports and up to 2 SIP accounts the Yealink T21P E2 is the ideal, cost effective, IP phone for any office environment. Additionally the Yealink T21P E2 supports power over Ethernet (PoE) to help centralise your instillation and improve ease of deployment.Features:2.3" 132 x 64 Pixel Back Light LCD Display2 x Ethernet Ports 10/100 POE Support2 x SIP Accounts2 x Line KeysWall-mountableHigh Definition Voice Support

Please check stock availability before placing order Fanvil’s X3G IP Phone offers users a 2.4/2.8 inch (320x240) color LCD screen, and is easy to install and configure. It supports 2 SIP lines, EHS Wireless headsets and HD voice.  This product is supplied with no power supply and direct DC can be bought additional: 5V DC PSU Specifications: SIP Lines: 2 HD Voice POE Enabled  Handset(HS) / Hands-free(HF) / Headset(HP) / Mode (EHS supports for Plantronics headsets) Desktop / Wall-mount Installation LCD: 2.4/2.8 inch (320x240) Color-screen LCD Keypad: 32 Keys HD Hands-free Speaker (0 ~ 7KHz)  HD Hands-free Microphone (0 ~ 7KHz)  HD Handset (RJ9)  Standard RJ9 Handset Wire  1.5M CAT5 Ethernet Cable x1 RJ9 Phone Jacket x2: Handset x1, Headset x1 RJ45 Ethernet Jacket x2: Network x1 (802.3AF POE Class 1 Enabled), PC x1 (Bridged to Network)  

1. Introduction - The adapter is an use Power Line or Coax and Twisted Pair(only two copper line) for Ethernet data communication adapter. Support plug and play, plug in outlet or link transmission cable will easily extend Ethernet length limit. Adapter in power line transmit distance up 500 meters max, in coax or twisted pair up to 2000meters max. - The adapter support up 200Mbps date rate, support QoS. Built-in filter have better anti-interference, can pass downlink power meter and use any one phase of three-phase 380V AC power for Ethernet data communication. - The Adapter support 128bit AES or 3DES encryption. Built-in WEB management. You can set Privacy Network group and adapter AP/ EP mode. 2. Feature - Support HomePlugAV, IEEE802.3, IEEE802. 3U standard; - Use Existing power line or Coax & twisted pair; - Up 200Mbps data rate, support point to point or multi-point; - Up 500m power line, 2000m coax long distance; - Support Qos VLAN, for HQ Ethernet user; - Support 128BIT AES 3DES encryption; - Built-in WEB manager UI, no need install other software; - Built-in filter and relay route function, for complex environment; - Global wide input voltage range AC 100-240V, 50/60Hz.     General Material ABS Quantity 1 set Other Features Cable Length 140cm Connector BNC , RJ45 Power Adapter US Plug Power Supply AC 100~240V Dimensions & Weight Dimensions 6.3 in x 4.33 in x 1.54 in (16 cm x 11 cm x 3.9 cm) Weight 17.81 oz (505 g) Packing List 2 x Adapters 2 x US Plug power cable (140cm) 1 x English user manual 1 x Chinese user manual

Tenda TEG1124P-24-250W 24-Port Gigabit Ethernet Switch TEG1124P-24-250W is a Tenda Gigabit Ethernet PoE switch that o ers 24 10/100/1000 Mbps Base-TX RJ45 ports. Ports 1-24 comply with the IEEE 802.3af standard (maximum PoE power output: 15.4 W) and 802.3at standard (maximum PoE power output: 30 W). The switch o ers a maximum PoE power output of 225 W and can supply power to and exchange data with APs, IP cameras, and IP phones through CAT5 cables. It also provides simple management modes such as CCTV, VLAN, and Isolation to help reduce cabling costs of IP terminals like APs and IP cameras 6KV Lightning Protection PoE Switch is the only engineering switch In real projects, APs and cameras are often installed outdoors or at an elevated location, which increases the chance of lightning strikes on cameras and PoE-powered switches. The result is that individual devices are damaged when the outcome is light, and even the whole local area network is damaged. Tenda TEG11 series switches have a professional lightning protection design – 6KV Lightning Protection for Ports and the power, and they have two levels of protection design respectively, which effectively suppress the lightning current from the network cable and power supply, equivalent to adding a security wall to the entire network monitoring system. The test standard is much higher than the national CCCrequest. In the thunderstorm, Tenda TEG11 series switches can also provide a stable and reliable service to the surveillance network and guarantee the normal transmission of the picture. CCTV, Standard, VLAN and Isolation Operation Modes Offered CCTV: in this mode, the port cache is optimized and PoE ports 1-8 have higher priorities over the other ports. All the ports of the switch can communicate with each other. If multiple IP cameras are connected to the switch, you are recommended to enable this mode and connect the uplink port of the switch to the upstream device to which the monitoring computer connects. This ensures smoother monitoring video playback. Standard: the switch functions as a common unmanaged switch and all the ports of the switch can communicate with each other. VLAN: ports 1 to 22 of TEG1124P-24-250W are isolated from each other, but can communicate with ports 23 and 24 (uplink ports) respectively.Solid DIP switch to isolate ports to prevent broadcast storm and defend DHCP spoofing. Isolation: ports 1 to 12 and Ports 13 to 24 of TEG1124P-24-250W belong to two different VLAN. This mode can be used to isolate supervision network and wireless network to make them not interfere with each other. 225W PoE power supply simplified wiring Ports 1-24 comply with the IEEE802.3af and IEEE802.3at power supply standards. The entire switch offers a maximum PoE power output of 225W, whereas each port offers a maximum PoE power output of 30 W. The ports can be used to supply power to and exchange data with APs and IP cameras. Specifications Standard b'&' Protocol IEEE 802.3/IEEE 802.3u/IEEE 802.3ab/IEEE 802.3x/IEEE 802.3af/IEEE 802.3at Indicator 24*Link/Act per device 24*PoE per device 1*Power per device Interface 24 10/100/1000Base-T ports(Data/Power) Lightning Protection 6KV Store b'&' Forward Yes exchange capacity 48 Gbp Packet Forwarding Rate 35.6Mpps RAM Data Buffer 4Mb MAC Address Table 4K PoE supply management Port 1-24 support IEEE802.3at/af PoE standard PoE through pin 1 2 4 5 +/3 6 7 8 – Input Power AC: 100-240V～50/60Hz Dimension 440*178*44mm(W x D x H) Power Consumption in full conguration: b' PoE Max Power Supply: 225W Port Features Standard: the switch functions as a common unmanaged switch and all the ports of the switch can communicate with each other. CCTV: the port cache is optimized and PoE ports 1-8 have higher priorities over the other ports. All the ports of the switch can communicate with each other. VLAN: ports 1 to 22 are isolated from each other, but can communicate with ports 23 and 24(uplink ports) respectively. Isolation: ports 1 to 12 and Ports 13 to 24 belong to two different VLAN. This mode can be used to isolate supervision network and wireless network to make them not interfere with each other. Environment Operating Temperature: 0℃~40℃ (32℉~104℉) Storage Temperature: -40℃~70℃ (-40℉~158℉) Operating Humidity: 10%~90% non-condensing Storage Humidity: 5%~90% non-condensing

Description Tenda 9-Port Fast Unmanaged Switch TEF1109P-8-102W is a Tenda Network switch that offers 9 10/100M RJ45 ports. Ports 1-8 comply with the IEEE802.3af standard (maximum PoE power output: 15.4w) and 802.3at standard (maximum PoE power output: 30W). The Tenda Network switch offers a maximum PoE power output of 92W and can supply power to exchange data with APs, IP cameras, and IP phones through CAT5e cables. It also provides simple management modes such as Standard, VLAN. Thus, F1109P-8-102W is a perfect choice for SMBs, hotels, and offices to have small-scale HD surveillance and wireless networking. Transmission Distance up to 250m With the extension technology, data can be transmitted through 250 meters cable which would be a cost-effective replacement for extenders and optical fibres. Excellent Lightning Protection The switch supports 6 kV lightning protection for the uplink port, protecting the switch from thunderstorms and making it more stable. What’s Special for TEF1109P-8-102W: Simple Port VLAN Setup With VLAN Mode on, ports 1 to 8 are isolated from each other, enabling the switch to isolate broadcast storms, improving LAN security and data transmission. What’s Special for TEF1109P-8-102W: Enjoy Super HD Video Screen Equipped with a 1024KB large packet buffer, it ensures smooth streaming even when eight HD IP cameras of 500W are working simultaneously. Integrated with Smart Power Management Chip Makes the Switch Get Rid of Overload It includes chips with a smart power management function and an integrated professional chip control algorithm, which can accurately calculate the output power. When the power of the receiving equipment exceeds the rated power (92W) of the PoE switch, the low priority port will automatically power off to avoid the over-run of the equipment and prolong the service life of the equipment. Outstanding PoE Power Supply Ports 1-8 support IEEE 802.3at and IEEE 802.3af PoE standard. It provides 30W maximum PoE output with a single port and 92W for the whole device. Specification Standard b'&' Protocol IEEE 802.3/IEEE 802.3u/IEEE 802.3x/IEEE 802.3af/IEEE 802.3at LED 9*Link/Act per device 1*Power per device Interface 8 10/100Base-T ports(Data/Power) 1 10/100Base-T ports(Data) Lightning Protection 6KV for uplink port Store b'&' Forward Yes Exchange capacity 1.6 Gbps Packet Forwarding Rate 1.34Mpps Packet buffer 1Mb MAC Address Table 2K PoE supply management Port 1-8 support IEEE802.3at/af PoE standard PoE through pin 1 2 4 5 + 3 6 7 8 – Input Voltage AC: 100-240V～50/60Hz Dimension 177.5*104*26mm (W x D x H) Port Features Standard: the switch functions as a common unmanaged switch and all the ports of the switch can communicate with each other. VLAN: ports 1 to 8 are isolated from each other, but can communicate with ports 9 (uplink port) respectively. Humidity Operating Temperature: 0℃~40℃ (32℉~104℉) Storage Temperature: -40℃~70℃ (-40℉~158℉) Operating Humidity: 10%~90% non-condensing Storage Humidity: 5%~90% non-condensing

Tenda 9-Port Fast Unmanaged Switch TEF1109P-8-102W is a Tenda Network switch that offers 9 10/100M RJ45 ports. Ports 1-8 comply with the IEEE802.3af standard (maximum PoE power output: 15.4w) and 802.3at standard (maximum PoE power output: 30W). The Tenda Network switch offers a maximum PoE power output of 92W and can supply power to exchange data with APs, IP cameras, and IP phones through CAT5e cables. It also provides simple management modes such as Standard, VLAN. Thus, F1109P-8-102W is a perfect choice for SMBs, hotels, and offices to have small-scale HD surveillance and wireless networking. Transmission Distance up to 250m With the extension technology, data can be transmitted through 250 meters cable which would be a cost-effective replacement for extenders and optical fibres. Excellent Lightning Protection The switch supports 6 kV lightning protection for the uplink port, protecting the switch from thunderstorms and making it more stable. What’s Special for TEF1109P-8-102W: Simple Port VLAN Setup With VLAN Mode on, ports 1 to 8 are isolated from each other, enabling the switch to isolate broadcast storms, improving LAN security and data transmission. What’s Special for TEF1109P-8-102W: Enjoy Super HD Video Screen Equipped with a 1024KB large packet buffer, it ensures smooth streaming even when eight HD IP cameras of 500W are working simultaneously. Integrated with Smart Power Management Chip Makes the Switch Get Rid of Overload It includes chips with a smart power management function and an integrated professional chip control algorithm, which can accurately calculate the output power. When the power of the receiving equipment exceeds the rated power (92W) of the PoE switch, the low priority port will automatically power off to avoid the over-run of the equipment and prolong the service life of the equipment. Outstanding PoE Power Supply Ports 1-8 support IEEE 802.3at and IEEE 802.3af PoE standard. It provides 30W maximum PoE output with a single port and 92W for the whole device. Specification Standard b'&' Protocol IEEE 802.3/IEEE 802.3u/IEEE 802.3x/IEEE 802.3af/IEEE 802.3at LED 9*Link/Act per device 1*Power per device Interface 8 10/100Base-T ports(Data/Power) 1 10/100Base-T ports(Data) Lightning Protection 6KV for uplink port Store b'&' Forward Yes Exchange capacity 1.6 Gbps Packet Forwarding Rate 1.34Mpps Packet buffer 1Mb MAC Address Table 2K PoE supply management Port 1-8 support IEEE802.3at/af PoE standard PoE through pin 1 2 4 5 + 3 6 7 8 – Input Voltage AC: 100-240V～50/60Hz Dimension 177.5*104*26mm (W x D x H) Port Features Standard: the switch functions as a common unmanaged switch and all the ports of the switch can communicate with each other. VLAN: ports 1 to 8 are isolated from each other, but can communicate with ports 9 (uplink port) respectively. Humidity Operating Temperature: 0℃~40℃ (32℉~104℉) Storage Temperature: -40℃~70℃ (-40℉~158℉) Operating Humidity: 10%~90% non-condensing Storage Humidity: 5%~90% non-condensing

Tenda TEF1126P-24-250W Rackmount Switch TEF1126P-24-250W is an unmanaged Network PoE switch independently designed by Tenda. Compliant with IEEE802.3af and IEEE 802.3at standards, it can identify PoE-powered devices intelligently. With a maximum PoE power output of 230 W and 30 W for a single port, it can supply power when transmitting data with APs, IP cameras, and IP phones. The Tenda Network Switch supports 4 working modes, including standard, priority, extend, and VLAN modes, an ideal choice for SMBs, hotels, schools, and factories with video surveillance and wireless networking requirements. GE and SFP Uplink Ports Flexible Networking With Less Breakdown It provides 24*FE+2*GE/1SFP. The 1-24 ports support AF/AT standard PoE power supply mode, which can intelligently identify the power receiving equipment. The Gigabit uplink port can be used for short-distance networking. With one 1000 Mbps combo SFP slot, the Tenda Network Switch can meet the current demand for uplink bandwidth of Gigabit WLAN and HD digital surveillance. Working with Tenda optical fibre module TEG311SM, the switch supports a maximum transmission distance of up to 20km. 4M Large Buffer Guarantees The Surveillance Transmission Stable And Smooth The product has a 4M buffer, which is twice larger than the similars. The maximum output of a single port is 30W, and the whole device is 250W. When used alone, it can provide data transmission and power for 24 PoE IP cameras, APs, etc. Extraordinary quality, favoured by engineering. 6KV Excellent Lightning Protection The switch offers various safety and protection types, including 6 KV lighting protection, PSE short-circuits protection, PoE overload protection, surge current protection etc, and these greatly protect the switch from being damaged by an inductive thunderstorm. Besides, it supports wide voltage input, AC：100-240V~50/60Hz. 230W High Power Output, Diversified Applications Providing 24 100M PoE ports in accordance with the IEEE802.3AF / AT standard, the maximum PoE output of the whole machine is 230W, and of a single port is 30W. Not afraid of burst traffic, avoid power failure b'&' restart, and it can provide stable power supply and data transmission for HD PoE IP cameras, APs, etc. 4 Modes For More Scenarios, One-key To Change Smart And Easy Standard mode, Port-based Priority mode, Port-based VLAN mode and Extend mode make TEF1126P-24-250W be able to deal with different networks, special for small b'&' Medium-sized IP Surveillance b'&' WI-FI coverage project. Up To 250 Meters Long Distance Transmission Under The Extend Mode, Beyond Hundred Meters Transfer Limitation Due to the complex monitoring environment, the distance from each terminal to the monitoring centre is different, some even more than a hundred meters. TEF1126P series can support 250 meters of data transmission in the Extend mode, which can save the cost of your project with fewer devices used. Specifications Standard b'&' Protocol IEEE802.3, IEEE802.3u, IEEE802.3ab, IEEE802.3z, IEEE802.3x, IEEE802.3af/at LED 24 * Link/Act LEDs 1 * G1 LED 1 * G2/SFP2 LED 1 * PoE-MAX LED 1 * Power LED Interface 24 * 10/100 Mbps Base-TX RJ45 ports (Data/Power) 1 * 10/100/1000 Mbps Base-T RJ45 ports (Data) 1 * 1000 Mbps Base-X SFP port (Combo) Forwarding Rate 6.55 Mpps Switching Capacity 8.8 Gbps MAC Address Table 16K Lightning Protection ≥6KV Input Voltage AC: 100-240V~50/60Hz PoE Supply Ports 1-24 support standard IEEE802.3af/at 30W output per PoE port 230W output of the total PoE Power Power Consumption 50W output the whole device Dimension 440*178.8*44mm Four Modes Standard: Default mode of the switch. In this mode, it works as an unmanaged switch all ports can communicate with each other separately. Priority: In this mode, port G1 and G2/SFP2 serve as uplink ports, ports 1 – 8 serve as high priority ports. All ports can communicate with each other separately. Extend: In this mode, the data rate of ports 17 – 24 reduces to 10 Mbps, the maximum transmission distance can be 250 meters, and all ports can communicate with each other. VLAN: In this mode, ports 1 – 24 of the switch can communicate with port G1, G2/SFP2 separately, but cannot communicate with each other. You can enable this mode to reduce broadcast storms and isolate DHCP broadcasts. Environment Operating Temperature: 0℃~45℃ (32℉~113℉) Storage Temperature: -40℃~70℃ (-40℉~158℉) Operating Humidity: 10%~90% non-condensing Storage Humidity: 5%~90% non-condensing Certification CCC、FCC、CE、RoHS

Vivotek AW-GEV Layer 2+ | AW-GEV-264B-370 Brand New & Sealed * Original Product * Valid Manufacturer's Guarantee * Fast Delivery Vivotek Product Code: AW-GEV-264B-370 Availability: 5 in Stock Vivotek AW-GEV Layer 2+ Series AW-GEV-264B-370 - Switch - L2+ - smart - 24 x 10/100/1000 (PoE+) + 2 x combo Gigabit SFP - desktop, rack-mountable - PoE+ (370 W) Overview The VIVOTEK AW-GEV Layer 2+ series, referred to as VivoCam PoE switch, is the world's first PoE switch with IP surveillance management functions. This switch is not only a standard Layer 2+ PoE switch, but also able to set up and configure VIVOTEK IP cameras, NVR and CMS. With single AW-GEV Layer 2+ series, the VivoCam PoE switch allows users to find all VIVOTEK devices and deploy a surveillance network system automatically. The AW-GEV Layer 2+ series, also features Graphic View, such as Topology/Map view for controlling and understanding network structure and device situation, and Google Map integration to view system situation status for outdoor applications. It not only features surveillance network environment set up functions, but troubleshooting and traffic monitoring functions also help users to clarify and troubleshoot any connection or device issue. In addition, users can also back up their IP camera configuration files, and batch re-boot/re-store camera device through the VivoCam PoE switch. With all of these features and more, the AW-GEV Layer 2+ series, is the best PoE solution to install and manage your VIVOTEK devices. Specifications Product Description Vivotek AW-GEV Layer 2+ Series AW-GEV-264B-370 - switch - 24 ports - smart - rack-mountable Device Type Switch - 24 ports - L2+ - smart Enclosure Type Rack-mountable 1U Subtype Gigabit Ethernet Ports 24 x 10/100/1000 (PoE+) + 2 x combo Gigabit SFP Power Over Ethernet (PoE) PoE+ PoE Budget 370 W Performance Switching capacity: 52 Gbps ¦ Forwarding performance: 38.68 Mpps Capacity VLAN IDs: 4096 MAC Address Table Size 8K entries Jumbo Frame Support 9216 bytes Routing Protocol Static IPv4 routing, static IPv6 routing Remote Management Protocol SNMP 1, RMON 1, RMON 2, RMON 3, RMON 9, SNMP 3, SNMP 2c, HTTPS, SSH, SSH-2 Features ARP support, trunking, VLAN support, IGMP snooping, Syslog support, port mirroring, IPv6 support, SNTP support, DDos attack prevention, Spanning Tree Protocol (STP) support, Rapid Spanning Tree Protocol (RSTP) support, Multiple Spanning Tree Protocol (MSTP) support, DHCP snooping, Trivial File Transfer Protocol (TFTP) support, Quality of Service (QoS), DHCP server, MLD snooping, STP Root Guard, IPv4 support, LACP support, LLDP support, Link Aggregation Control Protocol (LACP), IP-MAC binding, ov Compliant Standards IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p, IEEE 802.3af, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.1v, IEEE 802.1ab (LLDP), IEEE 802.3at Power AC 120/230 V (50/60 Hz) Dimensions (WxDxH) 44.2 cm x 21.1 cm x 4.4 cm Weight 3.5 kg Manufacturer Warranty 2 years warranty Delivery & FAQ's * Metropolitan Areas - Delivery of this item within 3 business days after payment reflects * Outlying Areas - Please allow 5 business days after payment reflects for delivery of this item This item carries a valid manufacturers warranty/guarantee. Manufacturer's Code: AW-GEV-264B-370 Vivotek

TOTO-LINK N300RH 300MBPS HIGH GAIN WIRELESS N ROUTER The N300RH is a 2T2R Wireless N Router which complies with n standard and equipped with two detachable high gain antennas for stable wireless connections. It can deliver up to 300Mbps wireless transmission speed for users to share large files or surf on the internet more smoothly and expands the wireless coverage. High gain antennas allow users to connect with more wireless network stability. 300Mbps Wireless N Speed Complying with the n standard, it delivers up to 300Mbps wireless transfer rates and a reliable connection for users to enjoy the best wireless connection throughout your entire home. Broadband Internet connection sharing over a secure wireless network with numerous computers can be provided easily. Ultra-broad Wireless Coverage High gain design significantly enhances the stability of wireless signal and extends wireless range to reduce dead spots. Two 11dBi high gain antennas provide strong signal and perform well in the the most adverse environments. Flexible Power Supply by Passive PoE Long distance power supply is supported thanks to the unique design of Passive PoE, you can choose the best position to transmit wireless signal without worrying about power outlets. It can ensure the security of structured cabling and provides flexibility when installing. VLAN for Amazing IPTV Experience A Virtual Local Area Network (VLAN) is a network topology configured according to a logical scheme rather than the physical layout. Hosts in the same VLAN communicate with each other. It can effectively satisfy user’s requirements that streaming media be uninterrupted even while other users browse the Internet. Outstanding Bandwidth Control with QoS Unified bandwidth control based on IP/MAC allows optimum bandwidth utilization for every user. It very effectively solves bandwidth usage problems while internal users enjoying high bandwidth-consuming applications. Each user can be assigned a specific bandwidth allocation which leads to better network performance. Robust Security The most advanced WPA/WPA2 (TKIP/AES) encryption is provided to ensure the security of wireless connection so that users needn’t worry about the network being used by others. In additions the router provides IP/MAC/URL filter to enhanced the security outside and inside the network. Product features: Excellent Wireless Network Performance Ultra-broad Wireless Coverage Flexible Power Supply by Passive PoE VLAN for Amazing IPTV Experience Outstanding Bandwidth Control with QoS Robust Security Specifications: Interfaces:4x Mbps LAN Ports 1x Mbps WAN Port Power Supply:9V DC/0.8A Antenna:2x 11dBi Detachable Antennas Wireless Standards:IEEE n, IEEE g, IEEE b RF Frequency:GHz Data Rate:Up to 300Mbps Operating Temperature:0°~55° C

Features: In wall design, match with the cassette with size of 86mm, easy to complete the hotel WiFi cover. Compliant with IEEE n/g/n standard, 300Mbps in data rate, more faster in download, more freely in internet surf. Support af 48V PoE, can be powered by any powered by any af Power over Ethernet equipment, easy in setting and complete the full wifi coverage. Powerful Frequency band from 2.4GHz to GHz. Equipped with 2 RJ45 ports, one on the front allowing wired access for guests and one on the rear for network service and power provision. It also has an RJ11 pass through port on the front with screw terminals on the rear. The Rj11 port can be used for a telephone. Support Q VLAN manage and Access Controller System (ACS), the IT staff can sets up different IP addresses, ESSID and manages each room’s AP at the same time. Muti SSID: PW300AP support 4 SSID, each SSID can be named and assigned to different users, then internet data is isolated. Specifications: Hardware MCU Chipset MTN RF 2T2R Memory 32MB DDR RAM (can be extended to 64 MB) Flash 4MB (can be extended to 8 MB) Interface Mbps/ 10Mbps auto-negotiation ethernet LAN / WAN ports 1 * RJ11 port Power 48V / 0.5A(Standard af POE) Antenna Internal 2dBi Product size mm / in Product weight 102g / 3.6oz Wireless Wireless standards IEEE n, IEEE g, IEEE b Speed 11b: up to 11Mbps 11g: up to 54Mbps 11n: up to 300Mbps Frequency GHz Security -bit WEP, WPA / WPA2,WPA-PSK / WPA2-PSK Channel 1 ~ 13 Out Power n: 15dBm for OFDM mode g: 17dBm for OFDM mode b: 20dBm for CCK mode Modulation OFDM = BPSK, QPSK, 16-QAM, 64-QAM DSSS = DBPSK, DQPSK, CCK Sensitivity 270M: -68dBm@10% PER 130M: -68dBm@10% PER 108M: -68dBm@10% PER 54M: -68dBm@10% PER 11M: -85dBm@8% PER 6M: -88dBm@10% PER Software Woke mode Gateway / AP / Repeater Wireless function Auto-Channel selection Distance Control (x Ack timeout) Multiple SSID (4 SSID) BSSID Security WEP Encryption- bit WPA/WPA2 Personal (WPA-PSK using TKIP or AES) WPA/WPA2 Enterprise (WPA-EAP using TKIP) Hide SSID DHCP DHCP Server, DHCP Client Network Port Mapping, DDNS, UPNP Firewall IP Address / Port / MAC / URL Filter / ANI-DoS Management Firmware upgrade and backup, factory reset, restart, WEB management OS Support Windows 7/Vista/XP/, Mac OS?, Linux or Android OS Environment Operating temperature °F~104°F) Storage temperature -°F~158°F) Operating humidity %, non-condensing Storage humidity 5% ~ 95%, non-condensing Package Package size mm / in Package weight 176g / 6.2oz Package List: 1 * In Wall AP 1 * Setting Accessory 1 * User Manual (English)

Cisco CP-7961G IP Phone - Reconditioned with a 1 year warranty.   Standard Network cable is not included.  Power supply is not included as standard practice is to use POE.   (POE Switches are also available from us at great prices) PLEASE NOTE:  Allow 7 to 10 days for delivery.  Discount available if you buy at least 4 phones at once. 

NETGEAR ProSafe GS108Tv2 8-Port | GS108T-200GES Brand New & Sealed * Original Product * Valid Manufacturer's Guarantee * Fast Delivery Netgear Product Code: GS108T-200GES Availability: 2 in Stock ports af PoE-PD as the optional power supply Advanced QoS and security with enhanced usability features Centralized management through Smart Control Center Software Up to 60% lower power consumption Auto power-down mode conserves energy when a port is not connected Overview With Mbps ports, each capable of powering Mbps of data throughput in full-duplex mode per port, the GS108T is an ideal solution for extending network connections into conference room, labs, lobbies and department workgroups. It enables SMB networks to support Voice over IP (VoIP), streaming media, multicasting, security, and many other bandwidth-intensive applications like ERP and large file transfers. The GS108T comes with a comprehensive set of features, such as access control lists (ACL), x port authentication, enhanced QoS, rate limiting and IGMP snooping among others to provide a small or medium-sized business with a network that is geared for growth while ensuring performance and reliability. In addition, the GS108T supports IEEE af standard for Power over Ethernet (PoE). It can obtain its power from either a PoE source or from an external AC power adapter. This gives an SMB flexibility when installing the switch in places where a power outlet is not present. The GS108T comes with an intuitive, Web-browser interface which offer simple Smart Switch management, making it a snap to monitor switch performance, configure ports, even set up port trunks, VLANs, and traffic prioritization. Alternatively, you can use SNMP-based software to manage your Smart Switch. NETGEAR ProSafe Smart Switches are ideal for adding basic management to your unmanaged networks or extending your managed networks. Specifications Product Description NETGEAR ProSafe GS108Tv2 8-Port Gigabit Smart Switch - switch - 8 ports - Managed - desktop Device Type Switch - 8 ports - Managed Enclosure Type Desktop Subtype Gigabit Ethernet Ports 1 x (PoE) + 7 x MAC Address Table Size entries Jumbo Frame Support Yes Remote Management Protocol SNMP 1, RMON 1, RMON 2, RMON 3, RMON 9, SNMP 3, SNMP 2c, HTTP, HTTPS Features Flow control, auto-sensing per device, DHCP support, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, Syslog support, traffic shaping, DoS attack prevention, port mirroring, DiffServ support, store and forward, Broadcast Storm Control, Multicast Storm Control, Unicast Storm Control, firmware upgradable, SNTP support, Rapid Spanning Tree Protocol (RSTP) support, Multiple Spanning Tree Protocol (MSTP) support, Access Control List (ACL) support, Quality of Service (QoS), Jumbo Frames supp Compliant Standards IEEE u, IEEE i, IEEE Q, IEEE ab, IEEE p, IEEE af, IEEE x, IEEE ad (LACP), IEEE w, IEEE x, IEEE s, IEEE ab (LLDP) Power AC V ( Hz) Dimensions (WxDxH) 15.8 cm x 10.5 cm x 2.7 cm Weight 0.56 kg Manufacturer Warranty NETGEAR lifetime warranty Delivery & FAQ's * Metropolitan Areas - Delivery of this item within 3 business days after payment reflects * Outlying Areas - Please allow 5 business days after payment reflects for delivery of this item This item carries a vaild manufacturers warranty/guarantee. Manufacturer's Code: GS108T-200GES Netgear

Mikrotik RouterBoard Groove 5SHPn Metal is rugged, completely waterproof, and high-powered. It has a built-in N-male connector and pole attachment points, so you can directly attach it to an antenna or use a standard antenna cable. LED signal indicators make it easy to install and align. The MikroTik RouterBoard part number for this product is: Metal 5SHPn. The RB-METAL5 has a fully sealed, industrial design metal case, powered by RouterBOARD and RouterOS. With 1.3 WATT of power output, it assists the user in reaching the last mile in almost any conditions. Package contains Metal-5SHPn, mounting loops, PoE injector, and power adapter. Specifications: CPU: Atheros ARMHz network processor. Memory: 64MB DDR SDRAM onboard memory. Ethernet: One Mbit/s Fast Ethernet port with Auto-MDI/X. Ethernet: L2MTU up to . Wireless: Built-in 5GHz a/n 1x1 MIMO, N-male connector. Wireless: Up to 1.3W output power. Extras: Reset switch, Beeper, Voltage monitor, Temperature monitor. LEDs: 5 Wireless signal LEDs, ethernet activity LED (configurable). Power options: Passive 8-30V PoE only. 16KV ESD protection on RF port. Consumption: Up to ~0,5A at 24V (11.5W). TX power: 31dBm. Architecture: MIPS-BE. LAN ports: 1. Gigabit: 0. MiniPCI: af support: No. Operating System: OS v5, Level4 licence (station, point-to-point or AP modes). Operating Temperature: -30ºC to +70ºC. Package contains: Metal 5SHPn unit, mounting loops, PoE injector, 24V power adapter. Dimensions (mm): 177x44x44. Weight: 193g. * It must be mounted with ethernet pointing down.

Mikrotik RouterBoard Groove 52Hn (RouterOS L3) is a small, outdoor, fully featured wireless RouterBOARD powered by RouterOS. Weatherproof, durable and ready to use. It has one Ethernet port with PoE support and a built in wireless radio. It has software selectable 2 or 5GHz wireless mode, and 500mW output power. The MikroTik RouterBoard part number for this product is: Groove 52HPn. With the Nv2 TDMA technology, up to 125Mbit aggregate throughput is possible. It has a built-in N-male connector, and pole attachment points, for easy attachment, directly to an antenna, or you can use a standard antenna cable. LED signal indicators assists with installation and alignment. Box contains: Groove unit, mounting loops, PoE injector, power adapter. Specifications: CPU speed: 600MHz. CPU cores: 1. RAM: 64MB. LAN ports: 1. Gigabit: no. MiniPCI: 0. Integrated Wireless: Yes. Wireless standards: a/b/g/n. PoE: 9-30V. Voltage Monitor: No. PCB temperature monitor: No. CPU temperature monitor: No. Operating System: RouterOS. Temperature range: -30C to +70C. RouterOS License: L3. Current Monitor: No. TX power: 27dBm. CPU: AR. Max Power consumption: Up to 0.19A at 24V (4.56W). Dimensions: 177 x 44 x 44mm, 193g