Poe port

Planet POE--Port af PoE Injector is a 4-Port IEEE af Power over Ethernet injector hub. Equipped with Base-TX Fast Ethernet ports, the POE-400 supports full 48VDC power for any remote IEEE af powered devices, such as Wireless LAN Access Points, IP phones and LAN Cameras. Supporting power supply of 70 watts, the POE-400 provides sufficient power to the 4 remote devices. There are 8 RJ-45 STP ports on the POE-400. Half of the ports on the right panel function as "Data" and the other half on the left panel function as "Data and Power". Each of the "Data and Power" ports is an injector that inserts DC Voltage into the CAT 5 cable allowing the cable between the Injector and Splitter to transfer data and power simultaneously. Specifications: Ethernet Connector: 8-Port RJ-45 STP with 4-Port "Data" & 4-Port "Data & Power", Ethernet Data Rate: Mbps (vary on Ethernet device attached), Input Voltage: DC 48V, 1.5A, Number of Devices that can be powered: 4, Ethernet Cable: TIA/EIA-568, Category 5/5e cable, LED Indicator: 1 x power, 4 x PoE ready / in-use, Operating Temperature: 0ºC ~ 50ºC, Storage Temperature: -20ºC ~ 70ºC, Humidity: 5% ~ 90% RH, Emission: FCC Class B, CE mark, Standard Compliance: iEEE Ethernet; IEEE u Fast Ethernet; IEEE af Power over Ethernet, Dimensions: HxWxD: 26 x 70 x 97 mm, Weight: 220g

CISCO CATALYST 3560-48PS 48 PORT 10/100 POE SWITCH. ONE MONTH WARRANTY OFFERED. SUITABLE TO POWER POE DEVICES SUCH AS: VOIP PHONES, IP CAMERAS, WIFI ACCESS POINT, ETC CISCO CATALYST 3560-48PS SWITCH FEATURES INCLUDE: Fast Ethernet;48 x 10/100 (PoE) + 2 x SFP Power Over Ethernet (PoE)Status Indicators; Port status, port transmission speed, port duplex mode, power, link OK LINK TO TECHNICAL INFO. https://www.cnet.com/products/cisco-catalyst-3560-48ps-switch-48-ports-managed-desktop-series/     PLEASE NOTE THAT ALL ITEMS ARE USED.   THE UNITS ON OFFER HAVE BEEN TESTED BY POWERING UP AND TESTING ALL POE PORTS AND CONFIRMING STATUS LIGHTS.    Payments to be made within 72 hrs of listing closing or SALE NOT CONCLUDED will be filed.   BUYER RESPONSIBLE FOR ALL SHIPPING CHARGES. WE RESERVE THE RIGHT TO REJECT ANY BID. All part numbers are recorded.   COLLECTIONS ARE ALLOWED IF IN THE CAPE TOWN AREA

CISCO CATALYST 3560-24PS 24 PORT 10/100 POE SWITCH. ONE MONTH WARRANTY OFFERED. SUITABLE TO POWER POE DEVICES SUCH AS: VOIP PHONES, IP CAMERAS, WIFI ACCESS POINT, ETC CISCO CATALYST 3560-24PS SWITCH FEATURES INCLUDE: Fast Ethernet;24 x 10/100 (PoE) + 2 x SFP Power Over Ethernet (PoE)Status Indicators; Port status, port transmission speed, port duplex mode, power, link OK LINK TO TECHNICAL INFO. https://www.cnet.com/products/cisco-catalyst-3560-24ps-switch-24-ports-managed-rack-mountable/     PLEASE NOTE THAT ALL ITEMS ARE USED.   THE UNITS ON OFFER HAVE BEEN TESTED BY POWERING UP AND TESTING ALL POE PORTS AND CONFIRMING STATUS LIGHTS.    Payments to be made within 72 hrs of listing closing or SALE NOT CONCLUDED will be filed.   BUYER RESPONSIBLE FOR ALL SHIPPING CHARGES. WE RESERVE THE RIGHT TO REJECT ANY BID. All part numbers are recorded.   COLLECTIONS ARE ALLOWED IF IN THE CAPE TOWN AREA

Buy *** POE CLEARANCE SALE *** CISCO CATALYST 3560-24PS 24 PORT POE SWITCH for R700.00

Buy *** POE CLEARANCE SALE *** CISCO CATALYST 3560-24PS 24 PORT POE SWITCH for R599.00

24 PORT POE NETWORK SWITCH CISCO BRAND 24x Ethernet 10/100 Ports 2x Dual-Purpose Ports Uplinks 1 RU Fixed-Configuration Layer 2 Fast Ethernet Switching Borderless Network Architecture SNMP Management Auto Smart Ports DHCP Autoconfiguration Cisco EnergyWise Technology Efficient Switch Operation PRICE R 2500.00 CALL 0768585404

This 4 port 10/100Mbps PoE switch is with 48V/1.25A external power,it provides an easier installation way for PoE devices,such as IP cameras,wireless AP,VoIP. And it can detect your PoE devices according to PoE standard.So the users do not need to worry about the PoE switch will damage their PoE devices. The max transmission distance is 100 meters with Cat5 cables. Ideally,shorter cable would reduce the power degradation over the cables; with high quality cables also can reduce power loss.Plug & play design make the installation quite easy,users do not need any configuration,which make this PoE switch a very good choice for IP cameras,wireless AP,VoIP users. IEEE 802.3af Power over Ethernet PoE compliant. Supports 10/100Mbps fast Ethernet. 48V/1.25A External power supply. Max power for single PoE port is 15.4W. Automatically detects the PoE class level of a Powered Device. 1Gbps bandwidth. Store-and-forward switching method. Plug and Play. General Quantity 1 piece Material ABS + metal Other Features Other Features Standards and protocols the IEEE 802.3 standard The IEEE 802.3 u 100 base - TX The IEEE 802.3 ab 1000 base-t The IEEE 802.3 af power Ethernet (POE) IEEE 802.3 x flow control Interface port 4 * 100 m POE (automatic negotiation, auto-mdix) Port 5 is a 10/100 MBPS uplink port Data transfer rate Ethernet: 10/100 Mbps (half/full duplex) Forward rate 148800 100 Mbps/polyphenylene sulfide (PPS)/polyphenylene sulfide (PPS), 10 Mbps, 14880 Power input: 100 ~ 50/60 V/Hz 48 v / 1.25 A external force DC48V The power supply pins (36 (12):) The index of electric power, POE/activities, link Environmental operating temperature: 0 to 40 Storage temperature: 40-70 Working humidity: 10% to 90%, without condensation Store humidity: 5% to 5%, without condensation Dimensions & Weight Dimensions 7.87 in x 7.09 in x 1.57 in (20 cm x 18 cm x 4 cm) Weight 17.64 oz (500 g) Packing List 1 * PoE switch 1 * Adapter(1m) 2 * Accessories

Description M-Link 4 PORT 10/100 POE + 1 LAN Switch 4 PORT 10/100 POE + 1 LAN – TXE104 b'/xc2/xa0' 5 PORT 10/100 POE – TXE104 Hardware Specifications Network Connector: 5-port RJ45 for 10/100BASE-TX, auto MDI/MDIX PoE Inject Port: 4-port with 802.3af/at PoE injector function (Port 1 to Port 4) LED Display: System Power (Green) Per PoE port: PoE (Red/Blue, Port 1 to Port 4) LNK/ACT (Green, Port 1 to Port 5) DIP Switch: Standard mode for 100M Extend mode for 250m (Based on the cable category) Switch Architecture: Store and Forward switch architecture MAC Address Table: 1K MAC address table with auto learning function EST Protection: 4KV Switch Fabric: 1Gbps Switch Throughput: 0.74Mpps @64bytes Maximum Packet Size: 1536bytes b'/xc2/xa0'

M-Link 4 PORT 10/100 POE + 1 LAN Switch 4 PORT 10/100 POE + 1 LAN – TXE104 b'/xc2/xa0' 5 PORT 10/100 POE – TXE104 Hardware Specifications Network Connector: 5-port RJ45 for 10/100BASE-TX, auto MDI/MDIX PoE Inject Port: 4-port with 802.3af/at PoE injector function (Port 1 to Port 4) LED Display: System Power (Green) Per PoE port: PoE (Red/Blue, Port 1 to Port 4) LNK/ACT (Green, Port 1 to Port 5) DIP Switch: Standard mode for 100M Extend mode for 250m (Based on the cable category) Switch Architecture: Store and Forward switch architecture MAC Address Table: 1K MAC address table with auto learning function EST Protection: 4KV Switch Fabric: 1Gbps Switch Throughput: 0.74Mpps @64bytes Maximum Packet Size: 1536bytes b'/xc2/xa0'

Description M-Link 8 PORT 10/100 POE+2 PORT Switch 8PORT 10/100 POE+2PORT – TXE188 8-Ports 10/100Mbps PoE + 2-Ports 10/100Mbps Unmanaged Ethernet Switch Description TXE188 is a 10-port 10/100Mbps Desktop PoE Switch that provides the seamless network connection These PoE ports can automatically detect and supply power with those IEEE 802.3at compliant Powered Devices (PDs) In this situation, the electrical power is transmitted along with data in one single Cable Allowing you to expand your network where there are no power lines or outlets here you wish to fix devices such as Aps IP Cameras or IP Phones, etc VLAN isolation to meet security monitoring requirements Support extension technology Data transmission and Power Supply up to 250m Independent Uplink Port can ensure that the Port can easily cope with sudden high traffic And ensure that the upstream channel is unobstructed. TXE188 is easy to install and use. It requires no configuration and installation With desktop design, outstanding performance and quality The 10-Port 10/100Mbps Desktop PoE switch is a great selection for expanding your home or office network Features Comply with IEEE802.3, IEEE802.3i,IEEE 802.3u,IEEE802.3x,IEEE802.3az,IEEE802.1q Ethernet standards; Supports IEEE802.3af, IEEE802.3at PoE standards Supports PoE power up to 30W for each PoE port, all power up to 117W VLAN isolation to meet security monitoring requirements Support 10 x10/100Mbps Auto-negotiation RJ45 ports with 8 port PoE function (POE1-8); Support extension technology, up to 250m transmission distance Independent Uplink Port can ensure that the Port can easily cope with sudden high traffic And ensure that the upstream channel is unobstructed Supports IEEE802.3x flow control for Full Half-duplex Mode and backpressure for Half-duplex Mode LED indicators for monitoring Port Link / Activity Internal power supply, exquisite design, suitable for desktop use b'/xc2/xa0'

M-Link 8 PORT 10/100 POE+2 PORT Switch 8PORT 10/100 POE+2PORT – TXE188 8-Ports 10/100Mbps PoE + 2-Ports 10/100Mbps Unmanaged Ethernet Switch Description TXE188 is a 10-port 10/100Mbps Desktop PoE Switch that provides the seamless network connection These PoE ports can automatically detect and supply power with those IEEE 802.3at compliant Powered Devices (PDs) In this situation, the electrical power is transmitted along with data in one single Cable Allowing you to expand your network where there are no power lines or outlets here you wish to fix devices such as Aps IP Cameras or IP Phones, etc VLAN isolation to meet security monitoring requirements Support extension technology Data transmission and Power Supply up to 250m Independent Uplink Port can ensure that the Port can easily cope with sudden high traffic And ensure that the upstream channel is unobstructed. TXE188 is easy to install and use. It requires no configuration and installation With desktop design, outstanding performance and quality The 10-Port 10/100Mbps Desktop PoE switch is a great selection for expanding your home or office network Features Comply with IEEE802.3, IEEE802.3i,IEEE 802.3u,IEEE802.3x,IEEE802.3az,IEEE802.1q Ethernet standards; Supports IEEE802.3af, IEEE802.3at PoE standards Supports PoE power up to 30W for each PoE port, all power up to 117W VLAN isolation to meet security monitoring requirements Support 10 x10/100Mbps Auto-negotiation RJ45 ports with 8 port PoE function (POE1-8); Support extension technology, up to 250m transmission distance Independent Uplink Port can ensure that the Port can easily cope with sudden high traffic And ensure that the upstream channel is unobstructed Supports IEEE802.3x flow control for Full Half-duplex Mode and backpressure for Half-duplex Mode LED indicators for monitoring Port Link / Activity Internal power supply, exquisite design, suitable for desktop use b'/xc2/xa0'

Trendnet TPE-S44. Switch type: Unmanaged. Copper ethernet cabling technology: 100Base-TX, 10Base-T. Networking standards: IEEE 802.3, IEEE 802.3af. Supported data transfer rates: 10/100 Mbps, Maximum data transfer rate: 0.1 Gbit/s. Colour of product: Blue, Certification: FCC, CE TPE-S44 8-Port Smart Switch integrates Power over Ethernet (PoE) and network management features into a cost effective and scalable solution. The TPE-S44 reduces equipment cost by delivering data and power over existing network cable infrastructure. -Reduces equipment cost by delivering data and power over existing network cables. -4 PoE and 4 standard 10/100Mbps ports. -Flow Control for Full-Duplex mode. -IEEE 802.3af Power over Ethernet (PoE) Standard Compliant. -8 x 10/100Mbps Auto-Negotiation and Auto-MDIX Fast Ethernet RJ45 Ports. -Built-in 4 PoE Ports (Port 1 ~ Port 4). -Supports PoE Power Maximum 15.4 watts for each POE port. -Supports PoE Powered Device (PD) classification identify. -Full Wire-Speed Non-Blocking Reception and Transmission. -Store and Forward Switching Method. -96Kbytes RAM Data Buffer and 1K entries MAC Address Table. -Extensive Diagnostic LED´s on the Front Panel. -IEEE 802.3x Flow Control for Full-Duplex Mode; Back Pressure Flow Control for Half-Duplex Mode. -5-year limited warranty.

Description M-Link 8-Ports 10/100/1000Mbps PoE Unmanaged Network Switch TXE143 is a 10-Ports 10/100/1000Mbps Desktop PoE network switch that provides a seamless network connection. These PoE Ports can automatically detect and supply power with those IEEE 802.3at compliant Powered Devices (PDs). In this situation, the electrical power is transmitted along with Data in one single Cable. Allowing you to expand your network where there are no power lines or outlets. Where you wish to fix devices such as APs, IP Cameras or IP Phones, etc. VLAN isolation to meet security monitoring requirements Independent Uplink Port can ensure that the Port can easily cope with sudden high traffic. And ensure that the upstream channel is unobstructed. TXE143 is easy to install and use. It requires no configuration and installation. With desktop design, outstanding performance, and quality. The 10-Ports 100/100/1000Mbps Desktop PoE switch is a great selection for expanding your home or office network Features: Comply with IEEE802.3, IEEE802.3i,IEEE 802.3u,IEEE802.3ab, IEEE802.3x,IEEE802.3az, IEEE802.1q Ethernet standards Supports IEEE802.3af, IEEE802.3at PoE standards Supports PoE power up to 30W for each PoE Port, all power up to 120W VLAN isolation to meet security monitoring requirements Support 10 x10/100/1000Mbps Auto-negotiation RJ45 ports with 8 ports PoE function (port1-port8) Independent Uplink Port can ensure that the Port can easily cope with sudden high traffic And ensure that the upstream channel is unobstructed Supports IEEE802.3x flow control for Full Half-duplex Mode; LED indicators for monitoring Port Link / Activity; Internal Power Supply, exquisite design, suitable for Desktop use

M-Link 8-Ports 10/100/1000Mbps PoE Unmanaged Network Switch TXE143 is a 10-Ports 10/100/1000Mbps Desktop PoE network switch that provides a seamless network connection. These PoE Ports can automatically detect and supply power with those IEEE 802.3at compliant Powered Devices (PDs). In this situation, the electrical power is transmitted along with Data in one single Cable. Allowing you to expand your network where there are no power lines or outlets. Where you wish to fix devices such as APs, IP Cameras or IP Phones, etc. VLAN isolation to meet security monitoring requirements Independent Uplink Port can ensure that the Port can easily cope with sudden high traffic. And ensure that the upstream channel is unobstructed. TXE143 is easy to install and use. It requires no configuration and installation. With desktop design, outstanding performance, and quality. The 10-Ports 100/100/1000Mbps Desktop PoE switch is a great selection for expanding your home or office network Features: Comply with IEEE802.3, IEEE802.3i,IEEE 802.3u,IEEE802.3ab, IEEE802.3x,IEEE802.3az, IEEE802.1q Ethernet standards Supports IEEE802.3af, IEEE802.3at PoE standards Supports PoE power up to 30W for each PoE Port, all power up to 120W VLAN isolation to meet security monitoring requirements Support 10 x10/100/1000Mbps Auto-negotiation RJ45 ports with 8 ports PoE function (port1-port8) Independent Uplink Port can ensure that the Port can easily cope with sudden high traffic And ensure that the upstream channel is unobstructed Supports IEEE802.3x flow control for Full Half-duplex Mode; LED indicators for monitoring Port Link / Activity; Internal Power Supply, exquisite design, suitable for Desktop use

Description Tenda 10/100Mbps POE Injector Tenda 10/100Mbps POE Injector PoE15F can realize the synchronous transmission of network data and power through an Ethernet cable (Cat.5 or better). The output power of each port is as high as 15W, which can be exported as PoE equipment (via RJ45 port). You can connect to ieee802.3af’s PD, such as wireless AP, IP camera, IP phone, etc. In a sense, reducing installation costs and improving network performance is a good choice. Features: Delivers power and data through one Ethernet cable for easy network extension Compatible with IEEE 802.3af compliant powered devices PoE Port Delivers power up to 100 meters Plug and Play, no configuration required Power Over Ethernet One PoE port to power connected devices for flexible network deployment IEEE 802.3af compliant Compatible with IEEE 802.3af compliant powered devices Extend Power Supply Distance of power transmission via Ethernet cable is up to 100 meters Plug and Play Hassle-free setup, no configuration required Specifications: Network standards IEEE802.3、IEEE802.3u LED Indicator Link/Act, PoE Status Interfaces 1*10/100 Base-TX Ethernet ports(Data/PoE) 1*10/100 Base-TX Ethernet ports(Data) Transmission media Recommended: CAT5/5e UTP or better Dimension 84.5mm*44mm*29.8 mm Level of protection ESD: Air discharge: ±10kV Contact discharge: ±8kV Forwarding mode Store-and-forward Transmission Rate 100Mbps PoE budget Single port: AF: 15.4W Whole device: 15W Power consumption 15W Input voltage 100－240V AC 50/60Hz 48V/0.3A DC（Power Adapter Output） Mounting Desktop mounting: support Environment Operating Temperature: 0℃~45℃ Storage Temperature: -40℃~70℃ Operating Humidity: 10%~90% non-condensing Storage Humidity: 5%~90% non-condensing Certification FCC、CE、RoHS b'/xc2/xa0' Why not browse our wide variety of Tenda Products HERE

Tenda 10/100Mbps POE Injector Tenda 10/100Mbps POE Injector PoE15F can realize the synchronous transmission of network data and power through an Ethernet cable (Cat.5 or better). The output power of each port is as high as 15W, which can be exported as PoE equipment (via RJ45 port). You can connect to ieee802.3af’s PD, such as wireless AP, IP camera, IP phone, etc. In a sense, reducing installation costs and improving network performance is a good choice. Features: Delivers power and data through one Ethernet cable for easy network extension Compatible with IEEE 802.3af compliant powered devices PoE Port Delivers power up to 100 meters Plug and Play, no configuration required Power Over Ethernet One PoE port to power connected devices for flexible network deployment IEEE 802.3af compliant Compatible with IEEE 802.3af compliant powered devices Extend Power Supply Distance of power transmission via Ethernet cable is up to 100 meters Plug and Play Hassle-free setup, no configuration required Specifications: Network standards IEEE802.3、IEEE802.3u LED Indicator Link/Act, PoE Status Interfaces 1*10/100 Base-TX Ethernet ports(Data/PoE) 1*10/100 Base-TX Ethernet ports(Data) Transmission media Recommended: CAT5/5e UTP or better Dimension 84.5mm*44mm*29.8 mm Level of protection ESD: Air discharge: ±10kV Contact discharge: ±8kV Forwarding mode Store-and-forward Transmission Rate 100Mbps PoE budget Single port: AF: 15.4W Whole device: 15W Power consumption 15W Input voltage 100－240V AC 50/60Hz 48V/0.3A DC（Power Adapter Output） Mounting Desktop mounting: support Environment Operating Temperature: 0℃~45℃ Storage Temperature: -40℃~70℃ Operating Humidity: 10%~90% non-condensing Storage Humidity: 5%~90% non-condensing Certification FCC、CE、RoHS b'/xc2/xa0' Why not browse our wide variety of Tenda Products HERE

Standards IEEE 802.3 10Base-T Ethernet IEEE 802.3u 100Base-TX Fast Ethernet IEEE 802.3x flow control IEEE 802.3af IEEE 802.3at protocol CSMA/CD Transmission Rate Ethernet 10Mbps (half duplex),20Mbps (full duplex); 10BASE-T:14,880pps/port Fast Ethernet 100Mbps (half duplex),200Mbps (full duplex); 100BASE-TX:148800pps/port Topology Star Network Medium 10Base-T:Cat 3 or above Cat.3 UTP(≤100m) 100Base-TX:Cat 5 UTP(≤100) Number of Ports 5 10/100M RJ45 ports POE Number of Ports 8 POE Port UPLINK 1 Up-link port !!!!!!!!!!!!!!!!!! CLICK HERE FOR MORE DEALS !!!!!!!!!!!!

Intellinet PoE-Powered 5-Port Gigabit Switch with PoE Passthrough - 4 x PSE PoE ports, 1 x PD PoE port, IEEE 802.3at/af Power-over-Ethernet (PoE+/PoE), IEEE 802.3az Energy Efficient Ethernet, Desktop, Retail Box, 2 year Limited Warranty

PoE injector by Tenda enables synchronous delivery of data and power via a single Ethernet cable (Cat.5 or better). The output power per port is up to 15W, which can serve as an outlet for a PoE device (powering via RJ45 port). You can connect the PoE15F to an IEEE 802.3af compliant device, such as a wireless AP, IP camera, IP phone, etc. Ideal for reducing installation cost and improving network performance.

Description Tenda PoE30G-AT Gigabit PoE injector The Tenda PoE30G-AT is the IEEE802.3 AT Gigabit PoE injector, which fully conforms to the standard of 802.3, transmitting power through Ethernet cable, the maximum transmission distance can reach 100 meters. The PoE injector has two Ethernet gigabit data ports and an output port combination of data and power. In addition, the device can be used for Ethernet device IEEE802.3af/ compatible PoE power applications such as wireless AP, VoIP phone and web CAM. The power supply of Ethernet cable not only provides system reliability, traditional power grid expansion but also simplifies the deployment of power lines. Features PoE ports support IEEE802.3at and IEEE802.3af standard Equipped with Gigabit port, blazing-fast transfer rate, the maximum transfer rate of up to 30W for a single port Power distance extension of up to 100 meters for the standard cat. 5e and Cat. 6 Ethernet cable Plug and play, no configuration required PoE Performance PoE ports support IEEE802.3at and IEEE802.3af standard Supports AT high power(30W) Power supply distance extension The standard cat’s power distance can be extended to 100 meters. The device can extend the range of PoE power over long distances, and simplify the deployment of power lines so that PD equipment can supply power. Gigabit blazing-fast delivery 10/100M/1000Mbps autosensing RJ45 port provides fast data delivery, supports wire-speed forwarding and MDI/MDIX, plug and play. Stable performance Adopts new chips solution, brings new performance experience, powerful data transfer and power Specifications Description PoE Injector Standard b'&' Protocol Compatible with IEEE802.3, IEEE802.3u, IEEE802.3ab, IEEE802.3af, IEEE802.3atStandard CSMA/CD, TCP/IP Features Support the powered devices compatible with IEEE802.3af、IEEE802.3at Standard Transmission range up to 100M Plug and play Port 1 GE port 1 datab'&'power output port supporting PoE Indicator PWR, PoE Dimension 131mm*60mm*33mm Power Output 30W Operation Temperature 0℃~40℃ Storage Temperature -40℃~70℃ Operating Humidity 10%~90% (noncondensing) Storage Humidity 5%~90% (noncondensing)

Tenda PoE30G-AT Gigabit PoE injector The Tenda PoE30G-AT is the IEEE802.3 AT Gigabit PoE injector, which fully conforms to the standard of 802.3, transmitting power through Ethernet cable, the maximum transmission distance can reach 100 meters. The PoE injector has two Ethernet gigabit data ports and an output port combination of data and power. In addition, the device can be used for Ethernet device IEEE802.3af/ compatible PoE power applications such as wireless AP, VoIP phone and web CAM. The power supply of Ethernet cable not only provides system reliability, traditional power grid expansion but also simplifies the deployment of power lines. Features PoE ports support IEEE802.3at and IEEE802.3af standard Equipped with Gigabit port, blazing-fast transfer rate, the maximum transfer rate of up to 30W for a single port Power distance extension of up to 100 meters for the standard cat. 5e and Cat. 6 Ethernet cable Plug and play, no configuration required PoE Performance PoE ports support IEEE802.3at and IEEE802.3af standard Supports AT high power(30W) Power supply distance extension The standard cat’s power distance can be extended to 100 meters. The device can extend the range of PoE power over long distances, and simplify the deployment of power lines so that PD equipment can supply power. Gigabit blazing-fast delivery 10/100M/1000Mbps autosensing RJ45 port provides fast data delivery, supports wire-speed forwarding and MDI/MDIX, plug and play. Stable performance Adopts new chips solution, brings new performance experience, powerful data transfer and power Specifications Description PoE Injector Standard b'&' Protocol Compatible with IEEE802.3, IEEE802.3u, IEEE802.3ab, IEEE802.3af, IEEE802.3atStandard CSMA/CD, TCP/IP Features Support the powered devices compatible with IEEE802.3af、IEEE802.3at Standard Transmission range up to 100M Plug and play Port 1 GE port 1 datab'&'power output port supporting PoE Indicator PWR, PoE Dimension 131mm*60mm*33mm Power Output 30W Operation Temperature 0℃~40℃ Storage Temperature -40℃~70℃ Operating Humidity 10%~90% (noncondensing) Storage Humidity 5%~90% (noncondensing)

24 pieces 10M/100Mbps PoE ports 2 pieces 100M network port (RJ45) 2 pieces SFP 100/1000Mbps ports IEEE802.3 AF/AT standard                                               Supports IPC and AP power supply Data and power supply over 100Meters 16.6W for each port output, total 400W Enough power to supports almost all of IPC Backplane bandwidth: 100M Transmit distance: ≤100M Power Supply: 400W/52V/7.7A Advantages: 16 port PoE switch, specially designed to meet the POE power supply demand and independent innovation R and D design of Gigabit uplink POE switch, using the latest high-speed Ethernet switch chip, occupied 16 port POE power supply, 2 Gigabit RJ45 port and 2 SFP fiber module expansion slots, at the meanwhile, support the simultaneous use of 4 port gigabit uplink All of 16-port are supports IEEE802.3AF/AT standard POE power supply, each port max Power supply reached 30W, whole ports max Power supply reached 400W Can be detected PD electric equipment automatically and priority mechanism power supply through network cable which fit IEEE802.3AF/AT standard   Excellent port performances: 1. Supply 16 10/100Mbps adaptive high speed forwarding data packet non-lost port 2. Supply 2 10/100/1000Mpbs RJ45 port, meet the fiber optic network seamless 3. Supply 2 SFP 10/100/1000Mpbs fiber optic module to expand the slot port, collocation uses SFP fiber module 4. Easily connect to optical fiber backbone network 5. Each port is supported by MDI/MDIX auto flip and self-negotiation 6. Supports IEEE802.3x flow control for Full-duplex mode and backpressure for half-duplex mode      

Planet FNSW-P 16 Port af PoE Switch can easily accommodate a powerful, centrally-controlled IP phone system, IP camera system or Wireless AP deployment to enable roaming. Specifications: Network Connector: 16-Port RJ-45 for Base-TX, PoE Inject Port: 16, LED: System -Power (Green), Per port - PoE (Orange), LNK/ACT (Green), Switch Architecture: Store and Forward, MAC Address: 8K MAC address table with Auto learning function, Switch Fabric: 3.2Gbps, Switch Throughput: 2.38Mpps @ 64Bytes, Power Requirement: AC V, Hz, 2A max., Power Consumption: Max.135 Watts / 460 BTU, PoE Standard: IEEE af Power over Ethernet, PoE Power Supply Type: Mid-Span, PSE, PoE Power Output: Per Port 48V DC, 350mA. Max. 15.4 Watts, Power Pin Assignment: (+), PoE Power Budget: 125 Watts, Operating environment: 0 ~ 50 Degree C, Storage environment: - Degree C, Operating Humidity: 5 ~ 95%, relative humidity, non-condensing, Storage Humidity: 5 ~ 95%, relative humidity, non-condensing, Dimensions (W x D x H): 445 x 207 x 45 mm (1U height), Weight: 2.33kg

Please always contact us first, before placing an order our stock is limited. We deliver nationwide. Ubiquiti's EP-R16 EdgePoint™ offers an innovative combination of robust routing performance, fiber back-haul capability, and the convenience of passive PoE support. The EdgePoint features FiberProtect to significantly reduce electrostatic discharge (ESD) failures and electromagnetic interference (EMI). FiberProtect greatly improves data signal integrity, and consolidates the wired-data back-haul to a single fiber cable run for long-distance connectivity.   It's link-balancing routing feature provides redundancy for outdoor wireless links.   Specifications  Enclosure Characteristics: Diecast Aluminum Alloy and Polycarbonate with UV Resistance - Max. Power Consumption: 40W (Excludes PoE Output) - Power Input: (1) DC Terminal Block or (2) RJ45 (Ports 1 and 2) - Power Input: Self-Correcting Polarity Protection on DC Terminal Block Only, Diode ORed Protection on All Power Inputs - Power Supply: Min. 54V / 0.8A (Excludes PoE Output Power) - VDC Input: 54VDC, 6A - Passive PoE Input: (2) 54V/1.5A, 4-Pair (+1, 2, 4, 5; -3, 6, 7, 8) Passive PoE, Ports 1 and 2 - Passive PoE Input: Do NOT Configure Port 1 or 2 in PoE Output Mode if You Are Using PoE Input Power Sources - Passive PoE Output: (4) 54V or 24V /1.4A, 4-Pair (+1, 2, 4, 5; -3, 6, 7, 8) Passive PoE, Ports 1 to 4 - Passive PoE Output: (12) 802.3af/at or 24V/0.7A, 2-Pair (+4, 5; -7, 8) Passive PoE, Ports 5 to 16 - Power Monitoring: (1) DC Terminal Block, Input Power, (2) RJ45, Ports 1 and 2, PoE Input or Output Power, (14) RJ45, Ports 3 to 16, PoE Output Power  - Supported Voltage Range: 56 to 42VDC - Button: Reset - LED System: Power - LED 1 to 16: Speed / Link / Activity, PoE - LED SFP: Speed / Link / Activity - Serial Console Port: (1) RJ45 Serial Port - Data Ports: (16) 10/100/1000 RJ45 Ports, (2) 1/10 Gbps SFP+ Ports - Processor: ARM Cortex-A9 400 MHz - System Memory: 256 MB DDR3 RAM - Code Storage: 32 MB - Pole/Wall Mount: Yes - Operating Temperature: -40 to 65° C - Operating Humidity: 10 to 90% Non-condensing - Dimensions: 326.6 x 382.7 x 88.8 mm - Dimensions with wall-mount: 326.6 x 382.7 x 105.5 mm - Weight: 3.4 kg - Weight with wall-mount: 3.8 kg    

D-Link DGS-P 8-Port PoE | DGS-P/E Brand New & Sealed * Original Product * Valid Manufacturer's Guarantee * Fast Delivery D-Link Product Code: DGS-P/E Availability: 47 in Stock Plug and Play operation Gigabit speed Fanless, silent operation to fit in any environment Safety function to prevent PoE overloads, protects both the switch and the connected PoE devices Cable diagnostics function to help troubleshoot wiring problems Green Ethernet technology, saves energy and increases the product's lifespan Overview The DGS-P PoE Gigabit Desktop switch provides a cost-effective way for SOHO and SMB to benefit from the Power over Ethernet (PoE) technology by allowing users to power up devices such as wireless access points, network cameras or IP phones directly from the network cables. The DGS-P is equipped with Gigabit ports for faster speeds, and integrates D-Link's Green Ethernet technology to save power when the switch is not in use. Its fanless design makes it completely silent so it is ideal for offices, libraries or meeting rooms. The first four ports of the DGS-P support the IEEE af PoE standard. Each of these four ports can supply up to 15.4 Watts, making it a very convenient solution for applications that are far away from power outlets, or when it is necessary to minimize the clutter of extra power supplies. The switch will automatically detect the power that a connected PoE device requires so no configuration is needed. A failsafe mechanism will cut off the power in case of an unexpected PoE overload, protecting both the switch and the connected device. Every time the DGS-P is powered up, it runs a micro diagnostics routine to check the integrity of the connected Ethernet cables. If a failure is detected, the switch will flag it by means of its front panel LEDs, making it easy for the user to troubleshoot wiring problems. Despite being an unmanaged, Plug and Play switch, the DGS-P is able to classify network traffic by assessing the existing p and DSCP fields in the Ethernet frames and IP packets respectively, and forward them out of its ports depending on their priority. This allows for a smooth integration of video, voice and data traffic without delays or loss of quality. The DGS-P is part of D-Link Green, D-Link's eco-friendly technology, providing energy savings, reduced power consumption, and a longer product lifespan without sacrificing operational performance or functionality. This switch implements the Green Ethernet technology, which can save a substantial amount of energy by detecting the connected cable lengths, adjusting the power accordingly; and the port status, putting them in low-power, stand-by mode when no network traffic is detected. Thanks to these power reductions, D-Link has been able to remove the fans in the DGS-P's design, making it completely silent and dramatically increasing its lifespan. Specifications Product Description D-Link DGS-P 8-Port PoE Gigabit Desktop Switch - switch - 8 ports - unmanaged - desktop Device Type Switch - 8 ports - unmanaged Enclosure Type Desktop Subtype Gigabit Ethernet Ports 4 x (PoE) + 4 x Power Over Ethernet (PoE) PoE MAC Address Table Size 4K entries Features Flow control, full duplex capability, auto-negotiation, auto-uplink (auto MDI/MDI-X), packet filtering, store and forward, Quality of Service (QoS), Jumbo Frames support, Green Ethernet, Cable Diagnostics Function Compliant Standards IEEE , IEEE u, IEEE ab, IEEE p, IEEE af, IEEE x Dimensions (WxDxH) 19 cm x 12 cm x 3.8 cm Delivery & FAQ's * Metropolitan Areas - Delivery of this item within 3 business days after payment reflects * Outlying Areas - Please allow 5 business days after payment reflects for delivery of this item This item carries a vaild manufacturers warranty/guarantee. Manufacturer's Code: DGS-P/E D-Link

D-Link DGS-P 8-Port PoE | DGS-P/E Brand New & Sealed * Original Product * Valid Manufacturer's Guarantee * Fast Delivery D-Link Product Code: DGS-P/E Availability: 68 in Stock Plug and Play operation Gigabit speed Fanless, silent operation to fit in any environment Safety function to prevent PoE overloads, protects both the switch and the connected PoE devices Cable diagnostics function to help troubleshoot wiring problems Green Ethernet technology, saves energy and increases the product's lifespan Overview The DGS-P PoE Gigabit Desktop switch provides a cost-effective way for SOHO and SMB to benefit from the Power over Ethernet (PoE) technology by allowing users to power up devices such as wireless access points, network cameras or IP phones directly from the network cables. The DGS-P is equipped with Gigabit ports for faster speeds, and integrates D-Link's Green Ethernet technology to save power when the switch is not in use. Its fanless design makes it completely silent so it is ideal for offices, libraries or meeting rooms. The first four ports of the DGS-P support the IEEE af PoE standard. Each of these four ports can supply up to 15.4 Watts, making it a very convenient solution for applications that are far away from power outlets, or when it is necessary to minimize the clutter of extra power supplies. The switch will automatically detect the power that a connected PoE device requires so no configuration is needed. A failsafe mechanism will cut off the power in case of an unexpected PoE overload, protecting both the switch and the connected device. Every time the DGS-P is powered up, it runs a micro diagnostics routine to check the integrity of the connected Ethernet cables. If a failure is detected, the switch will flag it by means of its front panel LEDs, making it easy for the user to troubleshoot wiring problems. Despite being an unmanaged, Plug and Play switch, the DGS-P is able to classify network traffic by assessing the existing p and DSCP fields in the Ethernet frames and IP packets respectively, and forward them out of its ports depending on their priority. This allows for a smooth integration of video, voice and data traffic without delays or loss of quality. The DGS-P is part of D-Link Green, D-Link's eco-friendly technology, providing energy savings, reduced power consumption, and a longer product lifespan without sacrificing operational performance or functionality. This switch implements the Green Ethernet technology, which can save a substantial amount of energy by detecting the connected cable lengths, adjusting the power accordingly; and the port status, putting them in low-power, stand-by mode when no network traffic is detected. Thanks to these power reductions, D-Link has been able to remove the fans in the DGS-P's design, making it completely silent and dramatically increasing its lifespan. Specifications Product Description D-Link DGS-P 8-Port PoE Gigabit Desktop Switch - switch - 8 ports - unmanaged - desktop Device Type Switch - 8 ports - unmanaged Enclosure Type Desktop Subtype Gigabit Ethernet Ports 4 x (PoE) + 4 x Power Over Ethernet (PoE) PoE MAC Address Table Size 4K entries Features Flow control, full duplex capability, auto-negotiation, auto-uplink (auto MDI/MDI-X), packet filtering, store and forward, Quality of Service (QoS), Jumbo Frames support, Green Ethernet, Cable Diagnostics Function Compliant Standards IEEE , IEEE u, IEEE ab, IEEE p, IEEE af, IEEE x Dimensions (WxDxH) 19 cm x 12 cm x 3.8 cm Delivery & FAQ's * Metropolitan Areas - Delivery of this item within 3 business days after payment reflects * Outlying Areas - Please allow 5 business days after payment reflects for delivery of this item This item carries a vaild manufacturers warranty/guarantee. Manufacturer's Code: DGS-P/E D-Link

Intellinet 12 Port Passive PoE Patch Panel - 24 Port Patch Panel with 12 port RJ45 Data In and 12 port RJ45 Data and Power Out, Retail Box, 2 year Limited Warranty. Product Overview: Do you need a cost effective solution to upgrade your Network with Power over Ethernet? Then the 720342 from Intellinet is your ideal solution. Intellinet is renowned for their PoE products and this is one of our latest additions. Highlights: • Passive Power over Ethernet Delivered on 12 Ports • 1U height • 19" Rack mountable • Simple Installation • Cost Effective Power over Ethernet Upgrade for your network • CAT5e Compatible Specifications: • Product Code: 720342 • Description: Intellinet 12 Port Passive PoE Patch Panel • 24 Port 1U 19" Patch Panel • 12 port RJ45 Data In • 12 port RJ45 Data and Power Out • 120 watts of usable power • Up to 30 watts per port • 12 PoE Injector Ports • Metal construction • Black

IN STOCK at supplier. If ordered before 12PM: DELIVERED next business day (main centres) or 3-5 business days (regional areas or large items) COLLECTION from Geewiz available Same Day (approx 4:30pm) Item is expected to be in stock, however stock levels are LOW, so stock may be finished. If ordered, we will contact you if this product is sold out FEATURES EP-R6 EdgePoint™ by Ubiquiti offers an innovative combination of robust routing performance, fibre back-haul capability, and the convenience of passive PoE support. The EdgePoint features FiberProtect to significantly reduce electrostatic discharge (ESD) failures and electromagnetic interference (EMI). FiberProtect greatly improves data signal integrity, and consolidates the wired-data back-haul to a single fibre cable run for long-distance connectivity. It's link-balancing routing feature provides redundancy for outdoor wireless links. PRODUCT SPECIFICATIONS Manufacturer Ubiquiti  Factory Number EP-R6 Product Type Edge Router Enclosure Characteristics Polycarbonate with UV Resistance Max. Power Consumption 7W (Excludes PoE Output) Power Input (1) DC Terminal Block or (1) RJ45 (eth0) Power Input Self-Correcting Polarity Protection on DC Terminal Block Only, Diode ORed Protection on All Power Inpu Power Supply Min. 24V / 0.3A (Excludes PoE Output Power) VDC Input 24V, 3A Passive PoE Input (1) 24V / 1.4A, 4-Pair (+1, 2, 4, 5; -3, 6, 7, 8) Passive PoE, eth0 Passive PoE Input Do NOT Configure eth0 in PoE Output Mode if using a PoE Input Power Source Passive PoE Output (5) 24V / 0.7A, 2-Pair (+4, 5; -7, 8) Passive PoE, eth0 to eth4  Power Monitoring (1) DC Terminal Block, Input Power, (1) RJ45, eth0, Input Power Supported Voltage Range 26 - 16VDC Button Reset LED System Power LED eth0 - eth4 Speed / Link / Activity, PoE LED eth5/SFP Speed / Link / Activity Data Ports (5) 10/100/1000 RJ45 Ports, (1) 1 Gbps SFP Port  Processor  Dual-Core 880 MHz, MIPS1004Kc System Memory 256 MB DDR3-1600 RAM Code Storage 256 MB NAND Pole Mount Yes Dimension 188.6 x 177.1 x 49.8 mm Weight  605 g

Specifications Standard & Protocol: IEEE 802.3, IEEE 802.3u, IEEE 802.3x, IEEE802.3ab, IEEE 802.3af, IEEE 802.3at MTBF: 50,000 hours (about 5 years) Indicator: Link/Act, PoE Status, Power, 100M Fixed Port: 8x 10/100Base-TX RJ45 Ports (Data/Power) Fixed Port: 1x 10/100Base-TX RJ45 Port (Data) Lightning Protection: 6KV Wire-speed forwarding: Supported Switching Capacity: 1.8 Gbit/s MAC Address Table: 4K MAC PoE supply management - Ports 1 to 8 support standard IEEE802.3at/af power (maximum power for each port is 30W)PoE power type is end-span (1245+, 3678- line pair) in full configuration - PoE Max Power Supply58W Input Voltage AC100240V 50/60Hz Input Voltage DC51V /1.25A Power Adapter Operating Temperature: 0~40 Storage Temperature: -40~70 Operating Humidity: 10%~90% non-condensing Storage Humidity: 5%~90% non-condensing Dimensions: 177.5mm x 104mm x 26mm (W D H)

Mikrotik RouterBoard 951i, 1 x PoE Out, 5 port LAN, 2.4GHz AP is a wireless SOHO AP with a new generation Atheros CPU and more processing power. It has five Ethernet ports, one USB 2.0 port and a high power 2.4GHz mW b/g/n wireless AP with antennas built in. The MikroTik RouterBoard part number for this product is: RB951Ui-2HnD. It has a 600MHz CPU,128MB of RAM and PoE output function for port #5 - it can power other PoE capable devices with the same voltage as applied to the unit. Maximum load on the port is 500mA. Package contains RouterBOARD 951Ui-2HnD in a plastic case and power adapter. Specifications: CPU speed: 600MHz. CPU cores: 1. RAM: 128. LAN ports: 5. Gigabit: No. MiniPCI: 0. Integrated Wireless: Yes. Wireless standards: b/g/n. USB: 1. Power Jack: Yes. af support: No. PoE: 8-30V DC on Ether1. Voltage Monitor: No. PCB temperature monitor: No. CPU temperature monitor: No. Operating System: RouterOS. Temperature range: -20C +50C. RouterOS License: L4. Antenna gain: 2.5dBi. Current Monitor: No. TX power: 30dBm. Max Power consumption: Up to 7W. SFP ports: 0. Dimensions: 113 x 138 x 29mm