Ttl

TTL Remote Cable for CANON 1 x 0.6m TTL Remote Cable @ R 450 1 x 3.6m TTL Remote Cable @ R 500 1 x 10m TTL Remote Cable @ R 855 This chord connects a Speedlight hotshoe flash to a Canon D-SLR with a standard ISO accessory shoe, facilitating full off-camera TTL operation. The hotshoe connector has a 1/4" threaded base to connect to a tripod or lightstand (with small spigot).

TTL Remote Cable for Nikon 1 x 0.6m TTL Remote Cable @ R 450 1 x 3.6m TTL Remote Cable @ R 500 1 x 10m TTL Remote Cable @ R 855 This chord connects a Speedlight hotshoe flash to a Nikon D-SLR with a standard ISO accessory shoe, facilitating full off-camera TTL operation. The hotshoe connector has a 1/4″ threaded base to connect to a tripod or lightstand (with small spigot).

TTL Off Camera Hot Shoe Flash Sync Cable Cord For Canon NEW Description: This affordable special accessory is useful to achieve off-camera flash photography results without the harsh shadows behind your subjects common when using direct flash exposures. This third party accessory allows you to connect your Canon Speedlight on one end of the cord and the other end will be mounted to the Hot Shoe unit of your EOS camera. You can stretch the accessory's cord by up to 1 metre long and away from the camera in any shooting degrees you wish to point the flash towards your intended subject. The Off Camera Shoe Cord 2 unit also come with a built-in tripod socket at the other end where the Speedlight unit is attached to which permits it to be locked onto a tripod and frees your hand from holding the off-camera flash. Cable Upstretched length: 0.4m Cable Max stretched length: 1m Suitable for: Any Canon SLR (Digital or Film) and Flash combination can make use of this Off-Camera cord. Fully compatible with the 220EX, 300EZ, 380EX, 420EZ, 420EX, 430EZ, 430EX, 480EG, 540EZ, 550EX, 580EX II How to use the OC-E3 cord: Attach to the camera: Slip the camera connector of the TTL cord into the camera's hot shoe all the way. Secure the off camera shoe cord: On the camera connector, slide the lock lever to the right. When the lock lever clicks in the place, it will be locked. Detach the off camera shoe cord: While pressing the lock-release button, slide the lock lever to the left and detach the off camera shoe cord. Package Includes: 1 x TTL Off-Camera Shoe Cord I ONLY POST TO ADDRESSES IN SOUTH AFRICA - NO INTERNATIONAL SALES  

Buy TTL to RS485 RS485 to TTL Bilateral Module UART Port Serial Converter Module 3.3/5V Power Signal for R229.00

Description Overview This module can be used to convert the RS232 voltage of PC to TTL voltage that used by microcontroller. Directly plug the DB9 connector your PC then you can communicate with the microcontrollers using the Serial port. It is applicable to a variety of platforms including Arduino / AVR / ARM. For Arduino, please also note that there is already a UART2USB connection, you just need this module if you want more serial connection to your computer. Features Chip: MAX3232 Voltage: 3.3V/5V Contents: RS232 to TTL Module x1 4 Pin DuPont Line x 1 More Products View More Products

3VDC ISOLATED DUAL CAN BUS TRANSCEIVER WITH TTL / CMOS INTERFACE UP TO 110 NODES.

5VDC ISOLATED RS-485 BUS TRANSCEIVER WITH TTL / CMOS INTERFACE UP TO 64 NODES.

Buy TTL Flash light -with Battery.high speed 1/8000s for R7,200.00

Buy TTL Off Camera Hot Shoe Flash Sync Cable Cord For Canon for R295.00

Buy TTL / CMOS TO DUAL CAN BUS INTERFACE 3V TD322DCAN for R226.31

|TTL Autoflash and Pro Functions|: Support TTL Autoflash, 1/8000s High-Speed Sync, Multi Flash, Manual Flash, Flash Exposure Compensation, TCM Transform Function, Magnfication Function, One-Shoot & Multi- Shoot Setting, Group Modeling Lamp Control, Group Zooming, Adjusting All Groups' Output Value Simultaneously, etc |SMART TCM BUTTON|: Long Press TCM Button can Transform the Flash Value in TTL Mode into the Power Output Value in M Mode; Short Press TCM Button Enables the Groups to be Switched Between the One-Group and Multi-Group Mode |Versatile Using Methods|: As a wireless Godox Flash Trigger/ Wireless Shutter Release Trigger/ Wireless Sony Speedlights Trigger/ Flash Trigger with 2.5mm Sync Cord Jack. Xpro-S Can Control the Sony Original Flashes Such as F42AM/HVL-45RM/HVL-F60M/HVL-F43M/HVL-F32M/F58AM When Using In Combination with Godox X1R-S Receiver(Sold Separately) |01-99 WIRELESS ID|: Only Achieve Triggering when the Channels and Wireless IDs of the Master and Slave unit are Set to the Same, Avoiding Signal Interference effectively |LARGE LCD Display|: 16 Groups and 32 Channels to Wirelessly Control and Trigger. Full Graphic Display of 5 Groups simultaneously

|TTL Autoflash and Pro Functions|: Support TTL Autoflash, 1/8000s High-Speed Sync, Multi Flash, Manual Flash, Flash Exposure Compensation, TCM Transform Function, Magnfication Function, One-Shoot & Multi- Shoot Setting, Group Modeling Lamp Control, Group Zooming, Adjusting All Groups' Output Value Simultaneously, etc |SMART TCM BUTTON|: Long Press TCM Button can Transform the Flash Value in TTL Mode into the Power Output Value in M Mode; Short Press TCM Button Enables the Groups to be Switched Between the One-Group and Multi-Group Mode |Versatile Using Methods|: As a wireless Godox Flash Trigger/ Wireless Shutter Release Trigger/ Wireless Olympus Panasonic Speedlights Trigger/ Flash Trigger with 2.5mm Sync Cord Jack |01-99 WIRELESS ID|: Only Achieve Triggering when the Channels and Wireless IDs of the Master and Slave unit are Set to the Same, Avoiding Signal Interference effectively |LARGE LCD Display|: 16 Groups and 32 Channels to Wirelessly Control and Trigger. Full Graphic Display of 5 Groups simultaneously

This item is sold brand new. It is ordered on demand from our supplier and is usually dispatched in 10 to 15 working days. We urge you to please read shipping details before placing your order. --------------------------------------- About the product The YN-568EX is Yongnuos first TTL flash supporting high-speed sync (HSS). This means one can use it in TTL and manual mode with shutter speeds up to 1/8000s all controlled by the cameras external flash menu. One more outstanding feature is the compatibility to both the Canon and Nikon wireless flash system. It is possible to use the same flash as slave in Canon and Nikon environments with full support of TTL and high-speed sync. Because the hot shoe is different from Nikon and Canon(YN568EX II is for Canon) the Canon version only can be used on top of Canon cameras with TTL but still supports wireless Nikon TTL and high-speed sync. Features 1. SUPPORTS HIGH-SPPEED SYNC FLASH YN568EX is the first speedlite supports high-speed flash in china; with high-speed sync (FP flash) the YN568EX can synchronize with all shutter speeds the maximum shutter sync up to 1/8000. 2. COMPATIBLE WITH Nikon and Canon WIRELESS FLASHING SYSTEM One YN568EX is able to respectively accept internal flashing of 580EX II SB-900/800/700 7D/60D/600D C order of Ns internal flashing and ST-E2 wireless signal achieves external TTL and manual flashing. Some beckoning functions such as wireless TTL flashing grouping light ratio TTL flashing and the illumination of remote controlled flashing can be easily attained only if you carry a camera with built-in flashing command system and YN500EX. 3. A NEW TTL FLASH WITH LARGE GUIDE NUMBER GN53@ ISO100 105mm; which reaches the level of the mainstream hot shoe flashes supports HSS TTL/M/Multi mode. 4. MULTIPLE TRIGGER MODE SUPPORTED The YN568EX can be triggered by the camera set-top built-in or main-controlled flashing command S1 and S2 (pre-flash-canceled mode). 5. SUPPORTS AUTO/MANUAL ZOOMING The covered focal length will vary among auto 24-105mm on the lamp adapter by operating the zoom button on the flash light supports full-frame/half-frame camera. 6. COMPREHENSIVELY SUPPORTS TTL FUNCTIONS The YN568EX supports HSS FEC FEB Rear-curtain sync FE lock Modeling Light Canon camera menu accessible 7. SUPER SPEED OF CHARGING RECYCLE The time for full gloss output current-return will only take you 3 seconds; you can get fast current-return experience even without brand-new batteries which will only take you 4~5 seconds. 8. COMPLETED WITH STANDARD PC SYNCHRONOUS INTERFACE It makes things easier on lightening the flashlight synchronously by using PC synchronous line. 9. SOUND PROMPTING SYSTEM When the sound prompting system is enabled the different sound ways will prompt the different working conditions of the flashlight so as to make you focus on shooting only. 10. DEPTH-OF-FIRED Press down the cameras depth-of-fired preview button the YN568EX will send out continuous flash lasting one second. 11. ADVANCED SETTINGS ON FLASH The YN568EX has advanced options setting function where you can self-define the functions of the flashlight on your own requirements. 12. AUTOMATIC SETTINGS SAVING YN568EX automatically save the operation currently used for your future use. 13. LCD PANEL USER INTERFACE WITH SUPER GELIVABLE METAL HOT-SHOE STAND Compatibility 1. Wirelss TTL Slave mode (both version): Canon 5D III 7D 60D 600D 650D Yongnuo ST-E2 Canon 580EX II Nikon SB-900 SB-800 SB-700 Commander SU-800 Camera with CLS i-TTL system: D4 D3x D3s D3 D2x D700 D300s D300 D200 D7000 D90 D80 2. Hot shoe i-TTL mode (Nikon Version): Nikon D4 D3x D3s D3 D2x D800E D800 D700 D600 D300s D300 D200 D7000 D90 D80 D5200 D5100 D5000 D3100 D3000 D60 D40 D40x --------------------------------------- See what else we're selling

Profoto's Air Remote E-TTL transmitter for Canon or Nikon is the key to wireless triggering and TTL remote control of its B1 and B2 AirTTL Off Camera Flash heads. Operating on the 2.4 GHz bandwidth, the transmitter, really a controller, has 8 frequency channels and with 3 groups per channel and a range of up to 330' for TTL triggering and 1,000' for normal triggering. Each channel has power ratio capability of +/- 2 stops. If you prefer to use manual you have +/- 9 stops power variation. You've also got modeling light, unit shut-down and first or rear curtain control. The TTL, the B1 500 AirTTL and B2 Off Camera Flashes have micro-USB connectors for firmware updates directly from Profoto's website, such as High Speed sync which allows sync speeds as short as 1/8,000 sec. Besides the B1 and B2, the Air Remote TTL-C will also manually remote trigger all Profoto Air packs and monolights but without the TTL feature. Off-Camera Full TTL Control for Profoto B1 and B2 AirTTL Flashes Place the Air Remote TTL on your camera hot shoe to merge your camera's TTL with your Profoto AirTTL flash. Then point-and-shoot and let the camera/flash technology automatically adjust the light output. It could not be easier Remote Triggering for Profoto Air Flashes With the Air Remote TTL you can remote control multiple Profoto B1 or B2 flashes directly from your camera. Control an endless number of lights in up to 3 groups from up to 330' in TTL and 1,000 ft in manual mode. Any Profoto head or pack with built-in Air technology can also be triggered but without TTL Fast and Reliable Flash Sync Air is one of the most reliable wireless systems available to sync your flashes with your camera. It is also fast enough to provide flash sync with to the fastest X-sync speed of your camera. If you are using Profoto Air flashes no external receiver is required. If other Profoto flashes are used, connect an optional Air Remote or Air Sync transceiver to your flash High Speed Sync as Fast as 1/8,000 Sec. High-Speed Sync (HSS) is the technical term for syncing flash with shutter speeds shorter than the so-called x-sync - typically 1/250 of a second. It is a useful tool for controlling ambient light and for freezing action. Profoto uses a unique, patent-pending technology, providing an extremely fast series of flash pulses. With the free Profoto HSS upgrade installed, you switch to HSS Mode with a simple button-press that allows you to shoot at shutter speeds as fast as 1/8000 of a second. A Wireless System with a Wide Range of Options Air Remote TTL is an integrated part of a wide range of Air products comprised of camera transceivers, accessory cables and software, all designed to offer a better wireless solution for professional photographers. Operating on the 2.4 GHz frequency band, the TTL is approved for worldwide use. A micro-USB port for free firmware upgrades is built into the B1 and B2 flashes

Overview: Optical isolation USB to TTL Serial Module Equipped with CH340T USB to serial chip, achieved the power and TTL signal isolation, High-speed and stability, it could  avoid the damage of USB and computer blue screen or other issues while use the USB to TTL serial port module, due to improper operation or other external impact on the computer  , could improve the safety of debugging. The function and characteristics: 1. Onboard 500mA self-recovery fuse and 5V isolated power supply module to protect the computer from damage 2. Onboard stable CH340T USB to serial chip 3. Serial TTL level through the optocoupler isolation, fast (up to 921600bps), high reliability 4. Output TX RX end with protection diode function, can improve the impact resistance 5. Computer USB end and serial port output end realize complete electrical isolation 6. Output TTL level can be set to 3.3V / 5V 7. Serial output maximum output current of 150mA 8. The board size: 55x26mm Feature: - 3.3V, 5V: Output supply voltage and TTL level switching pin - VCC, GND: Power supply output pin - The TX, RX, GND and VCC pins of the serial port module are connected to the RX, TX, GND, and VCC pins of the user equipment. When the isolated serial port module VCC pin with a jumper cap 5V, the output 5V TTL level and power supply voltage; while VCC pin with 3.3V jumper cap, the output level of 3.3V TTL and power supply voltage. The following is an example of using the isolated serial interface module to debug the 3.3V ESP8266 module (With the jumper cap to isolate the serial port module VCC and 3.3V shorted, isolated serial port module TX, RX, GND, VCC respectively ESP8266 RX, TX, GND, VCC), as the picture shows: The background description of using Isolated serial port module: USB interface was already one of the interfaces that most commonly used by engineers to debug product development. USB interfaces are not only often used in contact with the human body, but also in many cases, it also supplies power to external devices. Strong external power, strong interference may cause damage to the computer USB port or motherboard, then electrical isolation becomes particularly important. LC optically isolated USB to TTL serial port module is suitable for the following occasions: 1. Electrical equipment which containing strong electricity USB devices with high power (such as high voltage, inverter, motor drive, etc.) connact to computer USB may burn out the USB interface, be sure to isolate to ensure that the computer USB port, motherboard and personal safety, can effectively avoid USB Mouth damage and personal injury. 2. Electrical equipment with Strong interference  Such as motor drives, inverters and other great interference itself, into the USB port may lead to computer crashes, blue screen, no response. You can isolate the USB interface through this device to avoid interference with the computer. 3. Noise-sensitive equipment The computer itself is a noise source, through the isolated USB port, you can avoid high-frequency interference to the computer transmission to sensitive devices, and thus better access to data, such as audio equipment, precision measuring equipment and medical equipment.  4. Ordinary electronic equipment For ordinary electronic equipment, through the isolation can effectively avoid operational errors caused by short-circuit damage to the computer USB port, blue screen and other issues, greatly improving the security of the operation. P.S: As there is a certain error of the isolated serial module 5V to 5V above the isolated power supply, so when the VCC through the jumper cap 5V pin and no load when the output power supply voltage will be about 5.4V, but do not worry, when connected to the user equipment, After the device output voltage will automatically drop to 5V or so. Package included: 1 x  High-speed Isolation USB To TTL Serial Module

Features:   Yongnuo YN568EX TTL flash is an upgraded version of YN565EX now supporting High-Speed synchronization of up to 1/8000s. Great choice for professionals and advanced amateur Nikon users. Yongnuo YN568EX is top of the line external flash for Nikon DSLR cameras. It is a great alternative to much more expensive Nikon SB900, SB910 or SB700 speedlites, offering the same functions and same or even more power at much lower price. High guide number (58m), TTL and HSS (high speed synchronization) make this an excellent tool for digital photography. Yongnuo YN568EX supports high speed sync flash – YN568EX is the first speedlite which supports high-speed flash synchronization; with high-speed sync (FP flash), the YN568EX can synchronize at all shutter speeds. The maximum shutter sync is up to 1/8000 Compatible with Nikon and Canon wireless flash system – One YN568EX is able to respectively accept internal flashing of YN568EX II, 580EX II, SB-910/900/800/700, 7D/70D/60D/600D/650D/700D, Canon commander of Nikon’s built-in flashing and ST-E2 wireless signal, achieving off camera TTL and manual flashing. Some functions such as wireless TTL flashing, grouping light ratio TTL flashing and the illumination of remote controlled flashing can be easily achieved if you carry a camera with built-in flash commander system and YN568EX only. High Guide Number TTL + High Speed Sync – GN58@ ISO100, 105mm; which reaches the level of the mainstream hot shoe flashes, supports HSS, TTL/M/Multi mode. Multiple triggering mode supported – The YN568EX can be triggered by the camera set-top, built-in or main-controlled flashing command, S1 and S2 (pre-flash-canceled mode). Supports auto/manual zooming – The covered focal length can be changed between auto, 24 - 105mm on the lamp adapter by operating the zoom button on the flash light, supporting full-frame/APS-C cameras. Comprehensively supports TTL functions – The YN568EX supports HSS, FEC, FEB, Rear-curtain sync (2nd curtain sync), FE lock, Modeling Light Extreme speed of charging recycle – The time for full power output current-return just takes 3 seconds; you can get fast current-return experience even without brand-new batteries, which just takes 4~5 seconds Equipped with 2.5mm PC Synchronisation interface – It makes things easier on lightening the flashlight synchronously by using PC synchronisation port. Sound prompting system – When the sound prompting system is enabled, the different sound alerts will prompt different working conditions of the flashlight so as to allow you to focus on shooting. Aperture preview – Press the camera’s aperture preview button, the YN568EX will send out continuous flash lasting one second for subjects imaging. Advanced options function – The YN568EX has advanced options settings function, where you can self-define the functions of the flashlight to suit your own requirements. Automatic saving settings – YN568EX can automatically save your current operating settings to convenient your next use. LCD display interface, modern appearance. C ompatible with:   For Nikon D600, D610, D810, D800E, D750, D700, D800, D300, D300S, D7000, D7100, D7200, D3000, D3100, D3200, D3300, D5100, D5000, D5200, D5300, D90, D80 and any other Nikon DSLR Camera   Specification s: Circuit design: Insulated Gate Bipolar Transistor (IGBT) Guide No.: 58 meters (ISO 100, 105mm) Flash mode: TTL, Manual, MULTI, Sc, Sn, S1, S2 Wireless triggering distance: 20~25m indoor, 10~15m outdoor Zoom range: 24, 28, 35, 50, 70, 80, 105mm Vertical rotation angle: -7~90 degrees Horizontal rotation angle: 0~270 degrees Power supply: 4 × AA size batteries (Alkaline or Ni-MH are usable) Lighting times: 100~1500 times (AA alkaline cell used) Recycle time: approx 3s (AA alkaline cell used) Color temperature: 5600k Flash duration: 1/200s~1/20000s Flash control: 8 levels of output control (1/128~1/1), 29 levels of fine tuning External interface: hot shoe, PC port Additional features: Rear-curtain sync, FEC, FEB, FEV, modeling flash, manual zoom, auto zoom, sound prompt, advanced setting, automatically saving setting, PC port, power saving mode and over heat protection Dimensions: 60 × 190 × 73mm (Extended state) Net weight: 380g Note: The battery is not included.   Package Include d:   1 x Yongnuo YN-568EX Flash Speedlite for Nikon 1 x Mini Stand 1 x Manual in English and Chinese 1 x Original Box 1 x Soft Case for Flash

Yongnuo YN-568EXII Wireless TTL Flash Speedlite for Canon Camera The Yongnuo YN568EXII Speed Light  is the brand new range of speedlites which supports high-speed SYNC flash, TTL functions and remote wireless trigger. Compatible with N's and C's wireless flashing system, motor zooming and PC synchronous interface. Large size LCD display, multiple trigger mode, fast current-return functions never let you down. Features: •Supports master TTL flash: Master TTL wireless led flash function, supporting to led YONGNUO EX series lfashes, 600EX-RT, 580EXII, 430EXII and EX series flash. •Supports high-speed sync flash: The YN568EX II can synchronize with all shutter speeds, the maximum shutter sync up to . •  Compatible with N's and C's wireless flashing system, it is able to respectively accept internal flashing of YN568EX II, 580EX II, SB-D / 60D / 600D, C order of N's internal flashing and wireless signal of SU-800 and ST-E2, supports 4 channels, achieves external TTL and manual flashing. •  Large-size LCD display: The functions can be checked and set on a more clearly and visually and can be basis and can be used more conveniently by Large-size LCD display. •  Multiple trigger mode supported: It can be triggered by the camera set-top, built-in or master control flashing command, S1 and S2 pre-flashing. •Equipped with electronic zooming (mm): The covered focal length will vary between mm on the lamp adapter by operating the zoom button on the flash light. •Comprehensively supports TTL functions: HSS, FEC, FEB, Rear-curtain sync, FE lock, Modeling Light, Canon camera menu access able. •Remote wireless trigger supported: The YN568EX II supports remote wireless trigger function, which makes the Sc / Sn / S1 / S2 mode can be used in outdoor environment and the wireless trigger distance is as long as 15 meters. •Sound prompting system: When the sound prompting system is enabled, the different sound ways will prompt the different working conditions of the speed light so as to make you focus on shooting only. •Equipped with 2.5mm PC Synchronous Interface: The time for full gloss output current-return will only take you 3 seconds; you can get fast current-return experience even without brand-new batteries which will only take you 4~5 seconds. •Advanced option functions: YN568EX II has advanced options setting function, where you can self-define the functions of the speedlite as your own requirements. •Automatic saving functions: YN568EX II can automatically save the current operation currently used for your use later. Specifications: •  Circuit Design: Insulated Gate Bipolar Transistor (IGBT) •Guide Number:  58 (ISO mm) •Flash Mode: TTL, M, Multi •Trigger Mode: Set-top, Sc, Sn, S1, S2 •Zoom Range: Auto, mm •Vertical Rotation Angle: -7~90 degrees •Horizontal Rotation Angle: degrees •Power Supply: 4X AA size batteries (Alkaline or Ni-MH are usable) •Lighting Times: times (AA alkaline cell used) •Recycle Time: Approx. 3s (AA alkaline cell used) •Color Temperature: k •Flash Time: s~s •Flash Control: 8 levels of output control ( levels of fine tuning External interface hot shoe, PC port •Wireless Triggering Distance: m indoor, m outdoor •Additional Feature: Master flash, High-speed sync, Rear-curtain sync, FEC, FEB, FEV, the electronic flash head zooming, sound prompt, automatically saving setting, PC port, power saving mode, over heat protection, advanced setting. •Dimension: 60 X 73 X 190 mm (Extended state) •100% Brand New Note: •To avoid fire or electrical shock, do not expose this  device to rain or moisture. •To avoid short circuit, be sure the batteries contacts are  securely packed and in a accordance with local provision  when handing the batteries. •Please keep the batteries and the parts away from children.  Small parts may cause choking or serious injury if  swallowed. •Prohibit to shoot eyes directly in case of injury. •Do not disassemble or service this product by yourself.  Touching the internal high voltage circuit will cause  electric shock. •Warranty: 12 months Suitable for: •Camera: Canon 7D, 60D, 600D •Flash: Canon 580EX II, Nikon Nikon SB-900, SB-800,  SB-700 •Suitable Camera in TTL function: Canon 1Ds series,1D  series, 5D, 5DII, 7D, 40D, 50D, 60D,350D,  400D/XTi,450D/XSi, 500D/T1i, 550D/T2i, 600D/T3i, D,  D (Not compatible with 20D, 30D) •Suitable Camera in S1 / S2 mode: Any DSLR camera with  standard hot shoe Package Includes: •1 X Yongnuo YN568EXII Flashlight •1 X Protective Bag •1 X Mini Stand •1 X English Manual •1 X Original Packing Diffuser included I ONLY POST TO ADDRESSES IN SOUTH AFRICA - NO INTERNATIONAL SALES  

Yongnuo YN-568EX Wireless Slave TTL Flash Speedlite with  High-speed Sync for Nikon   Was: R Now only:R       Specification: Wireless Slave TTL Flash Speedlite YN-568EX  with  HSS  for Nikon version is realeased,it has  iTTL mode, Manual mode, Multi Mode, and Sc/Sn and S1/S2 mode. Features: a),  Supports Hight-Speed Sync Flash With high-speed sync (FP flash), the YN568EX can synchronize with all shutter speeds,  the maximum shutter sync up to . b),  AWL Suppoted for Canon's and Nikon's System YN-568EX can accept internal flashing of  580EX II, SB-900, SB-800, SB-700, Canon 7D, 60D 600D, Canon c-commander of Nikon's internal flashing and ST-E2 wireless signal, achieves external TTL and manual flashing. c),  TTL Flash With Large Guide Number GN58@ ISOmm; which reaches the level of the mainstream hot shoe flashes, supports HSS, TTL/M/Multi mode. d),  Multiple Trigger More Supported The YN568EX can be triggered by hot shoe, flash command slave mode, optical S1 and S2 (pre-flash-canceled mode). e),  Supports Auto/Manual Zooming YN-568EX covers focal length range of auto, and mm, supports full-frame/half-frame caemra.  f),  Comprehensively Support TTL Functions HSS, FEC, FEB, Rear-curtain sync, FE lock, Modeling Light, Canon camera menu accessible  g),  2.5mm PC Synchronous Interface It makes things easier on lightening the flashlight synchronously by using PC synchronous line. h),  Sound Prompting System When the sound prompting system is enabled, the different sound ways will prompt the different working conditions of the flashlight so as to make you focus on shooting only. i),  Modeling Light Function Press down the camera’s depth-of-fired preview button, the YN568EX will send out continuous flash lasting one second. j),  Advanced Settings On Flash The YN568EX has advanced options setting function, where you can self-define the functions of the flashlight on your own requirements. k),  Automatic Setting Saving YN568EX automatically save the operation currently used for your future use. l),  LCD Panel User Interface With Super Gelivable Metal Hot-Shoe Stand Suit for: 1),  Wirelss TTL Slave mode: Nikon Commander SU-800 Nikon Flash SB-910, SB-900, SB-800, SB-700 Nikon Camera w/ CLS i-TTL system: D3x, D3s, D3, D2x, D700, D300s, D300, D200, D, D90, D80 Canon 7D, 60D, 600D, 650D Canon Flash 580EX II Commander Canon ST-E2 2),  Hot shoe TTL mode: Nikon D4, D3x, D3s, D3, D2x, D800E, D800, D700, D600, D300s, D300, D200, D, D90, D80, D, D, D, D, D, D60, D40, D40x Parameters: Circuit designInsulated Gate Bipolar Transistor (IGBT) Guide No.58 meters (ISO mm) Flash modeTTL MULTI, Sc, Sn, S1, S2 Wireless triggering distancem indoor, m outdoor Zoom rangemm Vertical rotation angle-7~90 degrees Horizontal rotation angle degrees Power supply4×AAsize batteries (Alkaline or Ni-MH are usable) Lighting times times (AA alkaline cell used) Recycle timeapprox 3s (AA alkaline cell used) Color temperaturek Flash times~s Flash control8 levels of output control ( levels of fine tuning External interfacehot shoe, PC port Additional featuresRear-curtain sync, FEC, FEB, FEV, modeling flash, manual zoom, auto zoom, sound prompt, advanced setting, automatically saving setting, PC port, power saving mode and over heat protection Dimensionsmm (Extended state) Net weight350g   Package Included: 1 x YN-568EX for Nikon version 1 x Mini Stand 1 x Manual in English and Chinese 1 x Yongnuo Original box (with black protecting bag)  

YN-565EX II for Canon camera is released now, the only difference between the first version and the second version is the LCD Screen. Hightlight: 1), Supporting Canon and Nikon Wireless TTL Slave Mode YN-565EX supports both Canon and Nikon wireless TTL modes in parallel, which means you have a cross-brand compatible Flash Speedlite now when it comes to the wireless slave mode. a), It can receive wireless signal from Canon system as well as Nikon system at the same time. b), It can just only receive wireless signal from Canon system, avoiding Nikon System c), It can just only receive wireless signal from Nikon system, avoiding Canon System Under the wireless TTL slave mode (Off camera), YN-565 can be fired by Canon 580EX II, Nikon SB-900, SB-800, SB-700 and Canon 7D, 60D, 600D with built-in commander mode, Nikon Camera with C-commander and ST-E2 Note: Any flash exposure compensation, FEB, FE lock, manaul flash, and stroboscopic flash setting which be set with the master unit will be automatically transmitted to YN-565EX. 2), TTL Flash with very powerful guide number GN58 @ ISOmm, support TTL, M, Multi mode 3), Being fired via multiple ways via master flash on camera, camera with built-in commander mode,optical S1 and S2 4), Auto and manual zoom functions Has a mm focal length, supports full-frame / half-frame camera 5), Full support TTL Functions FEC, FEB, Rear-curtain sync, FE lock, Modeling Light, Menu Access of Canon camera 6), Higher Speed of Charging Recycle It only takes 3 seconds to finish a charging cycle after a full level output, you can even use external power pack to accelerate the charging speed. 7), Advanced Features a), Charging Socket for External Flash Pack (You can buy Yongnuo SF-18 C or SF-17 C) b), PC Port (You can buy 3.5mm PC Sync Cable to fit for it) c), Sound Prompt System --- Different sound stands for different working status,it's more convenient for you to operate. 8), Modeling Light Function Under the function of depth-of fired preview in Camera, YN-565 will provide one more second continuous light. 9), Advanced Setting and Automatic Saving Setting, Overheating Protection. 10), Wireless Sensor 11), LED Display and Metal version Hot shoe. Advanced Application: 1. Ultra-Long-Range Wireless flash (Indoor: 25m, ourdoor: 15m) 2. Flash Exposure Compensation 3. Rear-Curtain Sync 4. FEB 5. FE Lock 6. Advanced Setting 7. The use of external Flash Pack 8. High-Speed continuous Shooting 9. Reflection Flash 10.Using Reflection Board to take photoes 11.Use wide-angle Diffuser Suitable Camera and Flashes in Wireless TTL Slave mode: Camera: Canon 7D, 60D, 600D Flash: Canon 580EX II, Nikon Nikon SB-900, SB-800, SB-700 Suitable Camera in TTL function: Canon 50D 450D 500D 550D 600D 650D D D Canon Rebel XS XSi XTi T1i T2i T3 Suitable Camera in S1 / S2 mode: Any DSLR camera with standard hot shoe Suit for Yongnuo YN-622 C Package including: 1 x YN-565EX II for Canon 1 x Mini Stand 1 x Free Diffuser Cover 1 x Manual in English and Chinese 1 x Original box (with black protecting bag and wrapped by air bubble sheet)   Consignment Parcel will be shipped to you by Hongkong Registered Airmail that generally takes business days to deliver on your hands. Please allow up to 24hours preparation for shipping, although usually item send within 24 hours after payment confirmed. We will not be responsible for item loss because of wrong or undeliverable address. All of parcels will be declaimed as ‘Gift', and we always try the best to Legally Minimize your import duties (or GST or V.A.T. or other Taxes). In the most cases of shipping, there is none duty payable. However, if any additional charges generated for customs clearance must be borne by customer.

Features: Supports C's optical transportation wireless master flash: In the optical transportation wireless flash shooting, the YN568EX III can be used as a master unit to trigger YONGNUO and C's EX series speedlite(except the YN585EX), and supports 4 channels, realize wireless TTL, manual flash and stroboscopic flash. Compatible with C and N's optical transportation wireless slave flash: One YN568EX III can respectively accept the master unit of YN600EX-RT II, YN568EX II, YN568EX III, 600EX(II)-RT, 580EX II, SB-910/900/800/700, Nikon internal flash and for Canon commander and wireless signal of 7D/60D/600D, realizes external TTL, manual flash and stroboscopic flash. GN58@ISO100, 105mm, and supports automatic & manual zooming(24-105mm): High index TTL flash, supports TTL, M, Multi flash; and supports supports automatic & manual zooming, the focal length can be varied between 24-105mm. Supports high speed sync(HSS) flash and with high speed recycling(2s) system: The YN568EX III can synchronize with all shutter speeds, realize TTL and manual flash, 1/8000s maximum shutter sync; and the recycling time for full output just takes 2 seconds. Multiple trigger modes, automatic settings saving and custom setting supported: YN568EX III can be triggered by the camera set-top, PC synchronization trigger and wireless optical trigger off the camera. Supports firmware upgrade: The YN568EX III is equipped with USB interface, you can download the latest firmware from YONGNUO official website to upgrade the speedlite. Equipped with large-size LCD display and 2.5mm PC interface, and supports the battery remaining power real-time display, convenient to use. Specifications: Circuit design: Insulated Gate Bipolar Transistor (IGBT) Guide No.: 58 (ISO 100, 105mm) Flash mode: TTL, M, Multi Trigger mode: On-camera, Sc, Sn, S1, S2 Zoom range: 24, 28, 35, 50, 70, 80, 105mm Vertical rotation angle: -7~90 degrees Horizontal rotation angle: 0~270 degrees Power supply: 4 x AA batteries(not included; Alkaline or NI-MH are usable) Lighting times: 100~1500 times (with AA alkaline battery) Recycle time: Approx. 2s (with new AA alkaline battery) Color temperature: 5600k Flash time: 1/200s~1/20000s Flash control: 8 levels of output control (1/128~1/1), 29 levels of fine tuning in total External interface: hot shoe, PC port, USB port Wireless triggering distance: 20~25m indoors, 10~15m outdoors Additional features: Master flash, High speed sync, Rear-curtain sync, FEC, FEB, FE lock, electric zoom of flash head, sound prompt, auto-save setting, PC sync, USB port, power saving mode, overheating protection, advanced options setting. Item Size: 6.2 x 7.2 x 18.8cm/ 2.4 x 2.8 x 7.4in(Extended state) Item weight: 383g/ 13.5oz Package size: 21.5 x 9.5 x 8cm / 8.5 x 3.7 x 3.1in Package weight: 565g / 1.2lbs Compatible with: Hot shoe TTL mode: For Nikon D7400 D7300 D7200 D7100 D5600 D5500 D5400 D5300 D5200 D5100 D5000 D3500 D3400 D3300 D3200 D3100 D3000 D700 D800E D800 D810 D610 D750 D300s D200 D100 D80 D90 D40 D40x D60 D4 D3. Wirelss TTL Slave mode: For Nikon Commander SU-800 For Nikon SB-910, SB-900, SB-800, SB-700, Commander SU-800 Camera with CLS i-TTL system: D4, D3x, D3s, D3, D2x, D700, D300s, D300, D200, D7000, D90, D80 For Canon 7D 6D 600D 650D For Canon Flash 580EX II For Canon ST-E2 Commander Package Included: 1 x YN568EX III Speedlite 1 x Mini Stand 1 x Protecting Bag 1 x User Manual(English & Chinese)

    Phottix Flash Tube for Indra500 TTL Studio Light (PH01220); Product Description Replacement flash tube for Phottix Indra500 TTL Monolights. Committed to cutting-edge innovation and excellence in photographic accessories. The Phottix track record speaks for itself. Holder of 40 patents, Phottix achieved acclaim for its award-winning Phottix Odin TTL Flash Trigger - the first trigger to feature full TTL and Manual Power and flash zoom control. The revolutionary Phottix Mitros+ TTL Transceiver Flash built a radio TTL flash trigger and receiver into a hot shoe flash. In the last five years Phottix has become a dominant force in the photography industry. Phottix's electronic accessories run the gamut: From the innovative Phottix Mitros series of TTL Flashes, the Phottix Odin, Strato and Ares series of Flash Triggers, the Hector 7HD LCD remote, shutter releases, to lighting and studio solutions. All Phottix products are developed with feedback from professional photographer - to assist in overcoming the challenges they face. Phottix¿¿¿s 2014-2016 product line-up takes photography solutions to the next level with yet unseen technology, compatibility and durability. | | A replacement or spare, this Flash Tube from Phottix is rated at 500Ws and is user-replaceable | Allows users to easily get their Indra500 TTL Studio Light back up and running in no time | Limited 1 Year Warranty    

FAST AFFORDABLE COURIER SHIPPING TO SOUTH AFRICA 5 Pcs 3.3V 5V TTL Bi-directional Logic Level Converter For Arduino Feature: 2 channels of high-voltage logic and low-voltage logic bilateral switching 2-channel of high-voltage logic switch low voltage logic into unitary transformation Size: 15.5mm x 16mm x 11.5mm Module is compatible with the breadboard, it can be put on the breadboard directly Description: High Voltage: 5V Low Voltage: 3.3V GND for negative power 5V TTL RXI input, 3.3V TTL RXO output TXI input/output of 3.3 V TTL, TXO input/output 5 V TTL, TXI and TXO bilateral switching Package included: 5 x Logic Level Converter 5 Pcs 3.3V 5V TTL Bi-directional Logic Level Converter For Arduino 5 Pcs 3.3V 5V TTL Bi-directional Logic Level Converter For Arduino 5 Pcs 3.3V 5V TTL Bi-directional Logic Level Converter For Arduino

Descriptions:   Realize wireless optical and radio flash control function: In optical transmission and wireless radio transmission flash shooting, the YN600EX-RT II can used as master unit to control the flash mode, exposure compensation, flash ratio, number of stroboscopic and stroboscopic frequency. Compatible with (for) wireless radio RT system: In wireless radio transmission flash shooting, cooperate with the YN600EX-RT(II),   (for) 600EX   II-RT/430EXIII,one YN600EX-RT II can used as set-top master unit or remote slave unit, totally 15 channels for option, realize TTL, manual flash and stroboscopic flash. Supports (for)  optical transmission wireless master flash: In the optical transmission flash shooting, the YN600EX-RT II can be used as master unit to trigger the YONGNUO and (for) EX series flash (excluding the YN585EX),supports 4 channels, realize wireless TTL, manual flash and stroboscopic flash. GN60@ISO100, 200mm: YN600EX-RT II as professional creative high guide number speedlite, supports TTL,  M, Multi flash. Supports High-speed Sync: The YN600EX-RT II can realize TTL, manual flash, the highest shutter synchronous speed is up to 1/8000. Ultrafast Charging Recycle System, Supports External Power Supply: It just take 2 seconds at full output. Even if not use the brand new batteries, it just takes 3~4 seconds ultra-fast time to recycle; besides, you can also use the external power supply to meet your higher requirement. Supports Firmware Upgrade: The YN600EX-RT II equipped with USB interface, supports firmware upgrade, you can download the upgrade firmware through the Yongnuo official website to upgrade the flash. Support Auto/Manual Zooming: Supports auto and manual zooming, the flash coverage can be changed between AUTO, 20~200mm. Multiple Trigger Mode Supported: The YN600EX-RT II can be triggered by the camera set-top, PC synchronous trigger, wireless optical/radio remote trigger. Settings save Automatically, Supports Custom Settings (Fn). Equipped with Big Size LCD Display Screen, Standard PC Synchronous Interface. Specifications: Circuit design: Insulated Gate Bipolar Transistor (IGBT) Guide No.: 60 meters (ISO 100, 200mm) Flash mode: HSS, TTL, M, MULTI, GR Trigger Mode: Set-top, wireless master mode, wireless slave mode, Sc, Sn, S1, S2 Wireless triggering distance: 20~25m indoor, 10~15m outdoor Zoom range: 20, 24, 28, 35, 50, 70, 80, 105, 135, 200mm Vertical rotation angle: -7~90 degrees Horizontal rotation angle: 0~360 degrees Power supply: 4×AAsize batteries (Alkaline or Ni-MH are usable) Lighting times: 100~1500 times (AA alkaline cell used) Recycle time: approx 3s (AA alkaline cell used) Color temperature: 5600k Flash time: 1/200s~1/20000s Flash control: 8 levels of output control (1/128~1/1), 29 levels of fine tuning External interface: hot shoe, PC port Additional features: Master flash, High-Speed sync, Second-curtain sync, FEC, FEB, FEV, manual zoom,auto zoom, sound prompt, advanced setting, automatically saving setting, PC port,power saving mode and over heat protection Dimensions: 62×78×214mm (Extended state) Net weight: 430g Compatible With:   Hot shoe TTL mode: For 1Dx, 1Ds series, 1D series, 5DIV 5DIII, 5DII, 5D, 7D, 7DII, 80D, 70D, 60D, 50D, 40D, 30D, 20D,750D,700D, 650D/T4i, 600D/T3i, 550D/T2i, 500D/T1i, 450D/Xsi, 400D/Xti, 350D, 100D, 1100D, 1000D, 1200D Wireless TTL Slave mode: For  5DIII 7D 60D 700D 650D 600D, Yongnuo ST-E2, For canon 580EX II For canon Commander ST-E3-RT YONGNUO Commander YN-E3-RT   Master Mode, It can trigger these flash: YONGNUO: YN600EX-RT YN685C YN568EX II, YN568EX, YN565EX, YN500EX, YN560EX, YN510EX For: 600EX-RT, 580EX II, 580EX, 430EX II   Note: Camera & Batteries are not Included   Package Included:   1 x Flash Speedlite YN600EX-RT II  1 x Protector bag 1 x Mini stand 1 x Manual in English & Chinese

Descriptions: Realize wireless optical and radio flash control function: In optical transmission and wireless radio transmission flash shooting, the YN600EX-RT II can used as master unit to control the flash mode, exposure compensation, flash ratio, number of stroboscopic and stroboscopic frequency. Compatible with (for) wireless radio RT system: In wireless radio transmission flash shooting, cooperate with the YN600EX-RT(II), (for) 600EX II-RT/430EXIII,one YN600EX-RT II can used as set-top master unit or remote slave unit, totally 15 channels for option, realize TTL, manual flash and stroboscopic flash. Supports (for) optical transmission wireless master flash: In the optical transmission flash shooting, the YN600EX-RT II can be used as master unit to trigger the YONGNUO and (for) EX series flash (excluding the YN585EX),supports 4 channels, realize wireless TTL, manual flash and stroboscopic flash. GN60@ISO100, 200mm: YN600EX-RT II as professional creative high guide number speedlite, supports TTL, M, Multi flash. Supports High-speed Sync: The YN600EX-RT II can realize TTL, manual flash, the highest shutter synchronous speed is up to 1/8000. Ultrafast Charging Recycle System, Supports External Power Supply: It just take 2 seconds at full output. Even if not use the brand new batteries, it just takes 3~4 seconds ultra-fast time to recycle; besides, you can also use the external power supply to meet your higher requirement. Supports Firmware Upgrade: The YN600EX-RT II equipped with USB interface, supports firmware upgrade, you can download the upgrade firmware through the Yongnuo official website to upgrade the flash. Support Auto/Manual Zooming: Supports auto and manual zooming, the flash coverage can be changed between AUTO, 20~200mm. Multiple Trigger Mode Supported: The YN600EX-RT II can be triggered by the camera set-top, PC synchronous trigger, wireless optical/radio remote trigger. Settings save Automatically, Supports Custom Settings (Fn). Equipped with Big Size LCD Display Screen, Standard PC Synchronous Interface. Specifications: Circuit design: Insulated Gate Bipolar Transistor (IGBT) Guide No.: 60 meters (ISO 100, 200mm) Flash mode: HSS, TTL, M, MULTI, GR Trigger Mode: Set-top, wireless master mode, wireless slave mode, Sc, Sn, S1, S2 Wireless triggering distance: 20~25m indoor, 10~15m outdoor Zoom range: 20, 24, 28, 35, 50, 70, 80, 105, 135, 200mm Vertical rotation angle: -7~90 degrees Horizontal rotation angle: 0~360 degrees Power supply: 4×AAsize batteries (Alkaline or Ni-MH are usable) Lighting times: 100~1500 times (AA alkaline cell used) Recycle time: approx 3s (AA alkaline cell used) Color temperature: 5600k Flash time: 1/200s~1/20000s Flash control: 8 levels of output control (1/128~1/1), 29 levels of fine tuning External interface: hot shoe, PC port Additional features: Master flash, High-Speed sync, Second-curtain sync, FEC, FEB, FEV, manual zoom,auto zoom, sound prompt, advanced setting, automatically saving setting, PC port,power saving mode and over heat protection Dimensions: 62×78×214mm (Extended state) Net weight: 430g Compatible With: Hot shoe TTL mode: For 1Dx, 1Ds series, 1D series, 5DIV 5DIII, 5DII, 5D, 7D, 7DII, 80D, 70D, 60D, 50D, 40D, 30D, 20D,750D,700D, 650D/T4i, 600D/T3i, 550D/T2i, 500D/T1i, 450D/Xsi, 400D/Xti, 350D, 100D, 1100D, 1000D, 1200D Wireless TTL Slave mode: For 5DIII 7D 60D 700D 650D 600D, Yongnuo ST-E2, For canon 580EX II For canon Commander ST-E3-RT YONGNUO Commander YN-E3-RT Master Mode, It can trigger these flash: YONGNUO: YN600EX-RT YN685C YN568EX II, YN568EX, YN565EX, YN500EX, YN560EX, YN510EX For: 600EX-RT, 580EX II, 580EX, 430EX II Note: Camera & Batteries are not Included Package Included: 1 x Flash Speedlite YN600EX-RT II 1 x Protector bag 1 x Mini stand 1 x Manual in English & Chinese

Godox AD200 TTL Pocket Flash KitThe AD200 TTL Pocket Flash Kit from Godox is built around a unique flash light source that has a standard speedlight head and a bare bulb head that give you the option of 2 distinctly different qualities of light. The kit comes with the 2 heads, lithium battery, charger and a carry case. The speedlight head outputs the standard look of an on-camera flash that can be modified using an optional softbox, beauty dish or umbrella. The bare bulb head features a removable flash tube and produces 360 degrees of soft, bright, nearly shadowless light. The head uses optional reflectors that focus the beam angle and give you directional control. The AD200 has impressive core features such as 200 Ws of power adjustable in 8 steps from 1/128 to 1/1, recycling from 0.01 to 2.1 seconds and flash durations as short as 1/11,300 sec. The flash runs on a removal rechargeable lithium battery that will give you up to 500 full power flashes and thousands of lower power flashes.The AD200 has 3 flash modes: Manual, TTL, and Multi (Stroboscopic). Manual outputs the user's choice of power, modeling light, first or second curtain sync, etc. Multi controls the stroboscopic rate up to 90 times (90 Hz). TTL takes advantage of the flash head's built-in X1 receiver. Optional X1 TTL transmitters are available for Nikon, Canon, Sony, Olympus, Panasonic and Fuji cameras. They will also detect a separately purchased LED head. The 32-channel wireless system controls flash mode, first and second curtain sync, High-speed sync up to 1/8000 sec, power level, modeling lamp and ready beeper at distances up to 328'. Firmware updates are obtainable on the Godox website.Built-In 2.4 GHz Wireless X System Built-in wireless receiver: control triggering power level, alert beep with optional wireless transmitter. Compatible with Nikon, Canon, Sony, Olympus, Panasonic and Fuji TTL. Bare Bulb and Speedlight Flash Heads Bare bulb and speedlite flash heads are included to vary your quality of light. Color temperature is a steady 5600K over the entire power range. Large Capacity Lithium Battery Pack The 14.4 V / 2900 mAH battery pack gets 500 full power flashes with 0.01 to 2.1 sec. recycling. AV Panel Easily readable digital panel displays your adjustments Accessories Barn Doors, color filters and diffusers are available to personalize your work. Numerous Control Functions 8-step power range: 1/1 to 1/128 Supports flash exposure compensation 1/8000 sec high-speed Sync First and second curtain sync Modeling lamp Manual flash Multi flash Custom functions

The Indra360 Light provides the ultimate in control, with 360 watt-seconds of power, and the Phottix Odin TTL Flash Trigger for Canon and Nikon built-in. With a Li-ion battery, the Indra360 TTL is perfect for events on-location and any photographer that needs to move fast and stay portable.Photographers can use TTL to shoot during fast moving events like weddings. While shooting on-location under the harsh sun, photographers can control ambient light with high-speed sync. The built-in Odin Receiver makes the Indra360 TTL easy to control and trigger. The light offers 8 stops of power adjustment - from full power to 1/128 - perfect for overcoming midday sun or adding just a hint of light when shooting with large apertures. TTL exposures can be adjusted in +/- 3 EV levels.360 Ws maximum powerTTL, manual and stroboscopic modes4 channels1/8000 sec shutter speed possiblePower variable from 1/128 to fullBuilt-in receivers for Nikon & CanonBuilt-in Phottix Strato II ReceiverLED modelling light, optional AC adapter4000mAh battery pack300 full-power flashesSize: 140 x 267 x 190mmWeight: 2kgIncludes: Indra360 TTL Studio Light, S-Mount Reflector, Battery Pack (4000mAh), Multi-Voltage Charger, Bag, User Manual (in USB)

The Phottix Odin II TTL Flash Trigger — with new cutting-edge technology and features. The Odin II interface and control system has been overhauled making it faster and easier to use. It features 5 groups with individual buttons and a control dial for quickly adjusting flash power levels. An AF assist light has been added for improved focusing in low light environments. With 32 channels and a new Digital ID function, the Odin II offers photographers a way to personalized their Odins and prevent triggering from other nearby triggers.This Odin II TTL Transmitter (TCU) is compatible with Nikon DSLRs and compatible flashes. It will also control the Phottix Indra and Mitros+ TTL Transceiver Flash.Use your TTL flash off camera with full TTL functionsHigh Speed Sync 1/8000s*Manual power and TTL EV adjustmentsChange flash zoom and modelling light powerDigital ID to eliminate interference, 10000 unique ID numbersLCD display for visual feedbackUSB port for firmware upgradesGroup buttons and control dial32 Channels5 Groups (A/B/C/D/E)2.4GHz frequency100m+ rangeAF Assist LightCompatible with Phottix Indra, Phottix Mitros+, Odin I, Strato II, Strato I, Atlas II*on compatible camerasIncludes: Odin II Transmitter for Nikon, 2x AA Battery, USB Cable, Bag, User Manual (USB)

The Phottix Odin II TTL Flash Trigger — with new cutting-edge technology and features. The Odin II interface and control system has been overhauled making it faster and easier to use. It features 5 groups with individual buttons and a control dial for quickly adjusting flash power levels. An AF assist light has been added for improved focusing in low light environments. With 32 channels and a new Digital ID function, the Odin II offers photographers a way to personalized their Odins and prevent triggering from other nearby triggers.This Odin II TTL Transmitter (TCU) is compatible with Canon DSLRs and compatible flashes. It will also control the Phottix Indra and Mitros+ TTL Transceiver Flash.Use your TTL flash off camera with full TTL functionsHigh Speed Sync 1/8000s*Manual power and TTL EV adjustmentsChange flash zoom and modelling light powerDigital ID to eliminate interference, 10000 unique ID numbersLCD display for visual feedbackUSB port for firmware upgradesGroup buttons and control dial32 Channels5 Groups (A/B/C/D/E)2.4GHz frequency100m+ rangeAF Assist LightCompatible with Phottix Indra, Phottix Mitros+, Odin I, Strato II, Strato I, Atlas II*on compatible camerasIncludes: Odin II Transmitter for Canon, 2x AA Battery, USB Cable, Bag, User Manual (USB)