Ttl cable

TTL Remote Cable for CANON 1 x 0.6m TTL Remote Cable @ R 450 1 x 3.6m TTL Remote Cable @ R 500 1 x 10m TTL Remote Cable @ R 855 This chord connects a Speedlight hotshoe flash to a Canon D-SLR with a standard ISO accessory shoe, facilitating full off-camera TTL operation. The hotshoe connector has a 1/4" threaded base to connect to a tripod or lightstand (with small spigot).

TTL Remote Cable for Nikon 1 x 0.6m TTL Remote Cable @ R 450 1 x 3.6m TTL Remote Cable @ R 500 1 x 10m TTL Remote Cable @ R 855 This chord connects a Speedlight hotshoe flash to a Nikon D-SLR with a standard ISO accessory shoe, facilitating full off-camera TTL operation. The hotshoe connector has a 1/4″ threaded base to connect to a tripod or lightstand (with small spigot).

TTL Off Camera Hot Shoe Flash Sync Cable Cord For Canon NEW Description: This affordable special accessory is useful to achieve off-camera flash photography results without the harsh shadows behind your subjects common when using direct flash exposures. This third party accessory allows you to connect your Canon Speedlight on one end of the cord and the other end will be mounted to the Hot Shoe unit of your EOS camera. You can stretch the accessory's cord by up to 1 metre long and away from the camera in any shooting degrees you wish to point the flash towards your intended subject. The Off Camera Shoe Cord 2 unit also come with a built-in tripod socket at the other end where the Speedlight unit is attached to which permits it to be locked onto a tripod and frees your hand from holding the off-camera flash. Cable Upstretched length: 0.4m Cable Max stretched length: 1m Suitable for: Any Canon SLR (Digital or Film) and Flash combination can make use of this Off-Camera cord. Fully compatible with the 220EX, 300EZ, 380EX, 420EZ, 420EX, 430EZ, 430EX, 480EG, 540EZ, 550EX, 580EX II How to use the OC-E3 cord: Attach to the camera: Slip the camera connector of the TTL cord into the camera's hot shoe all the way. Secure the off camera shoe cord: On the camera connector, slide the lock lever to the right. When the lock lever clicks in the place, it will be locked. Detach the off camera shoe cord: While pressing the lock-release button, slide the lock lever to the left and detach the off camera shoe cord. Package Includes: 1 x TTL Off-Camera Shoe Cord I ONLY POST TO ADDRESSES IN SOUTH AFRICA - NO INTERNATIONAL SALES  

Buy TTL Off Camera Hot Shoe Flash Sync Cable Cord For Canon for R295.00

Features: Meike MK-FA02 TTL cord measured 3 meter,provides creative photographers with the ability to remotely fire off-camera Sony flash units. Removing the flash from the camera's hot shoe allows the photographer to create unique and dramatic lighting styles that are not possible with a traditional shoe-mounted strobe.One side of the TTL cable fits directly into the camera's hot shoe to ensure that all of the camera's exposure data is maintained. The other side can be attached to any stand, tripod, or device with a standard 1/4"-20 threaded stud or flash shoe mount. Support Flashes: Sony HVLF20M HVLF32M HVLF60M HVLF43M, Godox TT685S TT350S V860II-S, Meike MK-320S/MK-320 Length: 3m 118 Inches Package Includes: 1x 3m TTL Cable 1x Mcoplus Cleaning cloth

Features: The PHOLSY TTL-off-camera flash cord provides creative photographers with the ability to remotely fire off-camera OLYMPUS/PANASONIC Speedlites. Removing the flash from the camera's hot shoe allows the photographer to create unique and dramatic lighting styles that are not possible with a traditional shoe-mounted strobe. One side of the TTL cable fits directly into the camera's hot shoe to ensure that all of the camera's exposure data is maintained. The other side can be attached to any stand, tripod, or device with a standard 1/4"-20 threaded stud or flash shoe mount. Compatible Cameras: Mirrorless: Panasonic and Olympus with standard TTL hot shoe Point and Shoot: Olympus only with standard TTL hot shoe Compatible Flashes: Panasonic and Olympus TTL flashes Specifics: Cord Length: 6.5' (2 m) extended, 23" (59 cm) relaxed Box Contains: 1 X PHOLSY TTL-off-camera flash sync cord - OLYMPUS/PANASONIC

The 33' Vello Off-Camera TTL Flash Cord provides creative photographers with the ability to remotely fire Canon flashes with E-TTL / E-TTL II capabilities. Removing the flash from the camera's hot shoe allows the photographer to create unique and dramatic lighting styles that are not possible with a traditional shoe-mounted strobe. This straight cord measures 33', which will accommodate users who want to work with a flash mounted to a light stand or placed a distance away from the camera.. Also, off-camera lighting reduces the harsh shadows commonly encountered with direct on-camera flashes and gives your photographs a more natural look. One side of the TTL cable fits directly into the camera's hot shoe to ensure that all of the camera's exposure data is maintained. The other side can be attached to any stand, tripod, or device with a standard 1/4"-20 threaded stud or flash shoe mount and the shoe has a locking knob to ensure your equipment is secure.

Description: USB TO RS232 TTL PL2303HX Auto Converter Module Adapter 5V Output, provides the best and convenient way to connect your RS232 TTL devices or DEMO BRD. To your computer, via the usb port. Specification: Built-in TTL COM PC-PL2303HX Chip Standard USB type A male and TTL 4 pin connector Cable length: 1000mm (39 3/8 in) Simple and Easy way to give USB support to your designs Available for Linux, Mac, WinCE and Windows (XP, 2003), Vista, Win 7 Black cable-----GND Green cable----TXD White cable----RXD Red cable ---- VCC (5V) PL2303 Windows Driver Download Connection method: Brush requires only three lines, generally used only three signal lines RX TX GND, VCC. Note: After setting 3.3V and 5.0V output (this is to the microcontroller power supply, no need to upgrade the machine) please put the small plate unplug from the computer, set the jumper to take, do not charged to avoid damage to the device. Voltage: 5V. All you have to do is pop the plastic cover near the USB connector and re-solder the power from 5v to 3.3v to support 3.3v parts. Package included: 5 x USB to RS232/TTL PL2303HX cable adapter module

 1x Yongnuo YN-622N Wireless TTL 1/8000s Flash Trigger for Nikon D700 D800 D90 Specification -Yongnuo First Wireless i-TTL Flash Trigger YN-622N is Released now, it's designed for Nikon Camera. -Using Digital FSK 2.4GHz frequency band with 7 channels, it has three mode, i-TTL (II), Manual and Multi, and it can fire flashes at 360 degree direction, the operating range is 100 metres. -It supports FEC, FEB, FEL, High-speed Sync, 1st. Curtain, 2nd. Curtain, Modeling flash, iTTL II Group Ratio (ALL/A:B/A:B C), Manual/Multi group (ALL/ A:B/ A:B:C), Manual and Multi mode, Auto Zooming, Manual Zooming, AF Lamp. Main function Support Full iTTL Pass-through function when on camera Mount one YN-622N transceiver into the hot shoe of camera, and mount other transceiver into the hot shoe of flash, you can trigger the flash at any direction in TTL, Manual or Multi mode. Mount flash on hot shoe of YN-622N transceiver on camera, mount the second flash on other transceiver, both of flashes can be trigger at any direction in TTL, Manual or Multi mode. Note: Speedlites on hot-shoe of transmitter support iTTL II / Manual / Multi Shutter Sync High-speed Synchronous:The max. sync speed is 1/8000s, but some camera is just 1/4000s, and for those cameras and flashes who don't suport HSS, the sync. speed is just 1/250s or less, different cameras have different Sync speed. 1st. Curtain Sync 2nd. Curtain Sync. -Remote Control Function: The parameter of flashes on hot shoe of receivers can be set up remotely through the camera manu directly. -Supporting mixed mode: With this function, you can trigger remote speedlites in different modes, set up one YN-622N transceiver on hot shoe of flash in TTL mode, set up the second YN-622N transceiver on hot shoe of flash in manual mode, and the third YN-622N transceiver on hot shoe of flash in multi mode, all three flashes can be fired via the transceiver on hot shoe of camera, this mode is especially useful for those camera bodies without a built-in flash menu. Note: Only FEC, FEB, Ratio and Shutter sync can be set in the camera side. Manua and Multi output need to be set on the flash speedlite. -Work with Strobe Studio flash light in HSS function: You can buy a PC Sync Cable RF-603 6.35mm cable to connect the transceiver with the studio flash, and then youcan use the non-high speed sync flash torealize hihger syand then you can use them together in HSS. The max. trigger voltage is less than 300 Voltage. Note: The PC port is for output using only. -Awaking function: When half-pressing the shutter button of the camera, the hot shoe flash on the receiver will be awakened. (for those flash has wake up function) Zoom Function: Zoom Automatic: length will be changed depanding on the changes of lens. Zoom Manual: Zoom length is within 24 - 105mm Zoom Lock -Support Single-contact of camera and flash triggering (the max. Sync. speed is 1/250s): You can use it with Nikon camera or Nikon flash, but you just need to set up YN-622N in manual mode. -Flash Fire Ratio with iTTL: You can set up different flash fire ratio and FEC for those flashs on hot shoe of receiver. -Support 2pcs AA batteries, (1.2v rechargeable battery), Stand-by time is 60hours. -Dimension: 89.5 * 53 * 39MM, net weight is 78g. Note: There is a PC Sync port for YN-622N transceiver, you can use RF-602 PC / PC Cable to connect it with flash. Compatibility -Suit for (Camera): Nikon D70, D70S, D80, D90, D200, D300, D300S, D600, D700, D800, D3000, D3100, D5000, D5100, D5200, D7000, D7100 -Flash compatible (i-TTL): SB400, SB600, SB700, SB80,0 SB90,0 SB910, YN465N, YN467N, YN468N(II), YN565N, YN568N Package Include -1 x YN-622N transceivers NOTE: (Don't come with retail packing,Since Yongnuo not lanuch 1PC retail box.) We will send in sealed bubble bag. -Batteries not include

Phottix Mitros+ TTL Transceiver Flash Phottix Mitros hot shoe flashes have quickly become the industry's gold standard in TTL flashes. The Mitros+ is the 'go to' flash for wedding and event photographers.The Phottix Mitros+ TTL Transceiver Flash for Nikon is the perfect all-in-one triggering and hot shoe flash solution for use with Nikon DSLRs. It's a powerful, durable and easy-to-use hot shoe flash with built-in Odin Transmitter. Use the Mitros+ on-camera to control and trigger other Mitros+ flashes or compatible flashes using Phottix Odin Receivers. The Mitros+ also offers a built-in Odin Receiver, Strato II Receiver and functions in Master or Slave mode with wireless triggering.GN:58 Nikon-compatible TTL flashBuilt-in Phottix Odin Transmitter and Receiver, Strato II ReceiverOptical slaveNikon-compatible Master/Slave IR triggering modesETTL I/II, Manual and Multi Stroboscopic modesHigh Speed Sync and Second Curtain SyncAF Assist lightFlash zoom: 24-105mmExternal battery port, 3.5mm sync portQuick Flash modeMemory functionsRotating/elevating flash headPowered by 4x AA alkaline or NiMH batteriesDimensions: 203 x 78 x 58mmWeight: 427g (without batteries)Includes: Mitros+ Flash for Nikon, 3.5mm to 3.5mm Cable, USB Cable, Battery Port Adapter, Flash Stand, Diffuser, Carry Bag, Manual (USB Drive)

Buy SC-30 TTL Data Cable Off Hot Shoe Sync Cable Cord for Nikon for R750.00

YN-565EX II for Canon camera is released now, the only difference between the first version and the second version is the LCD Screen. Hightlight: 1), Supporting Canon and Nikon Wireless TTL Slave Mode YN-565EX supports both Canon and Nikon wireless TTL modes in parallel, which means you have a cross-brand compatible Flash Speedlite now when it comes to the wireless slave mode. a), It can receive wireless signal from Canon system as well as Nikon system at the same time. b), It can just only receive wireless signal from Canon system, avoiding Nikon System c), It can just only receive wireless signal from Nikon system, avoiding Canon System Under the wireless TTL slave mode (Off camera), YN-565 can be fired by Canon 580EX II, Nikon SB-900, SB-800, SB-700 and Canon 7D, 60D, 600D with built-in commander mode, Nikon Camera with C-commander and ST-E2 Note: Any flash exposure compensation, FEB, FE lock, manaul flash, and stroboscopic flash setting which be set with the master unit will be automatically transmitted to YN-565EX. 2), TTL Flash with very powerful guide number GN58 @ ISOmm, support TTL, M, Multi mode 3), Being fired via multiple ways via master flash on camera, camera with built-in commander mode,optical S1 and S2 4), Auto and manual zoom functions Has a mm focal length, supports full-frame / half-frame camera 5), Full support TTL Functions FEC, FEB, Rear-curtain sync, FE lock, Modeling Light, Menu Access of Canon camera 6), Higher Speed of Charging Recycle It only takes 3 seconds to finish a charging cycle after a full level output, you can even use external power pack to accelerate the charging speed. 7), Advanced Features a), Charging Socket for External Flash Pack (You can buy Yongnuo SF-18 C or SF-17 C) b), PC Port (You can buy 3.5mm PC Sync Cable to fit for it) c), Sound Prompt System --- Different sound stands for different working status,it's more convenient for you to operate. 8), Modeling Light Function Under the function of depth-of fired preview in Camera, YN-565 will provide one more second continuous light. 9), Advanced Setting and Automatic Saving Setting, Overheating Protection. 10), Wireless Sensor 11), LED Display and Metal version Hot shoe. Advanced Application: 1. Ultra-Long-Range Wireless flash (Indoor: 25m, ourdoor: 15m) 2. Flash Exposure Compensation 3. Rear-Curtain Sync 4. FEB 5. FE Lock 6. Advanced Setting 7. The use of external Flash Pack 8. High-Speed continuous Shooting 9. Reflection Flash 10.Using Reflection Board to take photoes 11.Use wide-angle Diffuser Suitable Camera and Flashes in Wireless TTL Slave mode: Camera: Canon 7D, 60D, 600D Flash: Canon 580EX II, Nikon Nikon SB-900, SB-800, SB-700 Suitable Camera in TTL function: Canon 50D 450D 500D 550D 600D 650D D D Canon Rebel XS XSi XTi T1i T2i T3 Suitable Camera in S1 / S2 mode: Any DSLR camera with standard hot shoe Suit for Yongnuo YN-622 C Package including: 1 x YN-565EX II for Canon 1 x Mini Stand 1 x Free Diffuser Cover 1 x Manual in English and Chinese 1 x Original box (with black protecting bag and wrapped by air bubble sheet)   Consignment Parcel will be shipped to you by Hongkong Registered Airmail that generally takes business days to deliver on your hands. Please allow up to 24hours preparation for shipping, although usually item send within 24 hours after payment confirmed. We will not be responsible for item loss because of wrong or undeliverable address. All of parcels will be declaimed as ‘Gift', and we always try the best to Legally Minimize your import duties (or GST or V.A.T. or other Taxes). In the most cases of shipping, there is none duty payable. However, if any additional charges generated for customs clearance must be borne by customer.

Phottix Mitros hot shoe flashes have quickly become the industry¿s gold standard in TTL flashes. The Mitros+ is the 'go to' flash for wedding and event photographers.The Phottix Mitros+ TTL Transceiver Flash for Canon is the perfect all-in-one triggering and hot shoe flash solution for use with Canon DSLRs. It's a powerful, durable and easy-to-use hot shoe flash with built-in Odin Transmitter. Use the Mitros+ on-camera to control and trigger other Mitros+ flashes or compatible flashes using Phottix Odin Receivers. The Mitros+ also offers a built-in Odin Receiver, Strato II Receiver and functions in Master or Slave mode with wireless triggering.GN:58 Canon-compatible TTL flashBuilt-in Phottix Odin Transmitter and Receiver, Strato II ReceiverOptical slaveCanon-compatible Master/Slave IR triggering modesETTL I/II, Manual and Multi Stroboscopic modesHigh Speed Sync and Second Curtain SyncAF Assist lightFlash zoom: 24-105mmExternal battery port, 3.5mm sync portQuick Flash modeMemory functionsRotating/elevating flash headPowered by 4x AA alkaline or NiMH batteriesDimensions: 203 x 78 x 58mmWeight: 427g (without batteries)Includes: Mitros+ Flash for Canon, 3.5mm to 3.5mm Cable, USB Cable, Battery Port Adapter, Flash Stand, Diffuser, Carry Bag, Manual (USB Drive)

SINGLE Yongnuo YN-622C Wireless e-TTL Flash transceiver for Canon NEW Yongnuo YN-622C Wireless e-TTL Flash transceiver / Flash Trigger Supports High-speed Sync HSS for Canon Flash Speedlight to 1/8000s Features: Recommended use with YN-568ex HSS flash Speedlight for Canon Specification: Using Digital FSK 2.4GHz frequency band with 7 channels, it has three modes: i-TTL, Manual and RPT, and it can fire flashes at 360 degree direction, the operating range is 100 metres. It supports FEC, FVL, High-speed Sync, Front Curtain, Rear Curtain, modelling flash, i-TTL, Manual/RPT, Manual mode, Auto Zooming, AF Lamp. Main function: a) Support Full I-TTL Pass-through function when on camera 1)  Mount one YN-622N transceiver into the hot shoe of camera, and mount other transceiver into the hot shoe of flash, you can trigger the flash at any direction in TTL, Manual or RPT mode. 2)  Mount flash on hot shoe of YN-622N transceiver on camera, mount the second flash on other transceiver, both of flashes can be trigger at any direction in TTL, Manual or RPT mode. Note: Speedlight on hot-shoe of transmitter support i-TTL/ Manual / RPT b)  Shutter Sync 1)  High-speed Synchronous. The max. sync speed is 1/8000s, but some camera is just 1/4000s, and for those cameras and flashes who don't support HSS, the sync. speed is just 1/250s or less, different cameras have different Sync speed. 2)  Front Curtain Sync 3)  Rear Curtain Sync. c)  Remote Control Function The parameter of flashes on hot shoe of receivers can be set up remotely through the camera manual directly. d)  Supporting mixed mode. FEC; FVL Ratio and Shutter sync can be set in the camera side. Manual and Multi output need to be set on the flash Speedlight. e)  Work with Strobe Studio flash light in HSS function f)  Awaking function g)  Zoom Function h)  Support Single-contact of camera and flash triggering (the max. Sync. speed is 1/250s) i)  Flash Fire Ratio with e-TTL j)  Support 2pcs AA batteries, (1.2v rechargeable battery)  Stand-by time is 60hours. k)  Dimension: 89.5 * 53 * 39MM, net weight is 78g. Note: There is a PC Sync port for YN-622N transceiver, you can use RF-602 PC / PC Cable to connect it with flash. Specifications:  System type - Digital FSK 2.4GHz wireless transceiver Operating range  - 100M Channels - 7 Groups - 3Groups (A/B/C) Flash mode - i-T TL; Manual mode; RPT flash mode Sync mode - Front-curtain Sync, Rear-curtain Sync, High Speed Sync(Auto FP) Highest sync speed  - 1/8000s Support function  - FEC; FVL; i-TTL; Manual / RPT flash mode; flash zooming; AF assist beam emitter; PC port; triggering strobe flashes; Front curtain, Rear curtain/HSS; LCD Live view triggering; single-contact of camera; flash triggering Input - Hot-shoe (TTL, main contact) Output - Hoe shoe; PC port Applicable battery - AA*2 (support 1.2 rechargeable battery) Stand-by time - 60h Dimensions  - 89.5*53*39mm Weight - 78g  Note: There is a PC Sync port for YN-622C transceiver, you can use RF-602 PC / PC Cable to connect it Suitable for: Camera: A: The EOS DSLR camera with external flash control menu: Canon 7D, 7D Mark II, 6D, 6D Mark II, 5D Mark II, 5D Mark III, 5D Mark IV, 1Ds Mark III, 1D Mark IV, 1D Mark III, 7D 60D 50D 40D 450D 500D 550D 600D 650D 700D 1000D 1100D 1200D 1300D B: The EOS DSLR Camera without external flash control manual: Canon 5D 10D 20D 30D 300D 350D 1D 1D Mark II Flash: Compatible ETTL Flash: (It support wireless remote control through camera menu) Canon 600EX (RT), 580EX II, 430EX II, 320EX, 270EX II Yongnuo YN-565EX C, YN-468 II C, YN-467 II C, YN-465 C Note: 430EX and 580EX or other parts of flash is not supported remote control via the camera menu, you need to manually set the flash parameters. Package including: 1x RF-622 C transceiver 1x Flash Stand 1x Instruction in Chinese and English WE ONLY POST TO ADDRESSES IN SOUTH AFRICA - NO INTERNATIONAL SALES  

 Yongnuo YN-622N-TX Wireless TTL Flash Controller/Transmitter + 1x YN-622N Flash Transceiver Kit for Nikon   Specifications: The YN-622N-TX transmitter acts as a master control unit to the popular YN-622N  I-TTL and Remote Manual transceivers, providing more functions and a far more user friendly built-in LCD user interface. You can use YN-622N-TX and YN-622N Transceiver as Flash Trigger system to fire flash. YN-622N-TX Features: 3 Groups (A/B/C) Mix TTL, Remote Manual, and SuperSync Groups Sync mode (front-curtain sync, rear-curtain sync, Hi-speed sync (Auto FP)) Max Sync. Speed: 1/8000s Trigger Interface: Hot shoe, PC Individual 1/3rd stop Manual Power and FEC adjustment Remote Flash Zoom in 3 groups, and Auto Zoom 2nd Curtain Sync, HSS, SuperSync USB port for Firmware Updates AF Assist Light Remote Shutter Release Function Dedicated Buttons for Fast Adjustments Battery Level Indicator 2.5mm shutter release interface (We have two cables, one is for N1, other is for N3) PC Interface (You can buy RF-602 PC/PC to connect it with your camera) 7 Channels Improved Stability and Transmission Speed SuperSync Manual Timing Adjustment by Group Flash Value Lock function (FVL) Modelling Flash & Red-Eye Reduction flash Settings Saved Automatically Up To 100M Range YN-622N Features: YN-622N i-TTL wireless transceiver is a high performance 2.4G wireless flash trigger designed for Nikon users. Different photographic effects can be produced through setting the flash at 360 degrees. It supports i-TTL and manual flash, front-curtain sync, rear- curtain sync and high-speed sync(Auto FP), the highest sync speed is 1/8000s*. It can remote change flash exposure compensation or flash output of each group, supports different flash modes. Supports the transmitter installed i-TTL flash, in addition, it supports the master unit on transmitter sets the parameters of each group. This product is a wireless transceiver design, the distance of remote control reaches 100M, supporting 7 wireless channels and A/B/C three groups, and with AF assist beam emitter function. Function: Compatible flash mode: I-TTL, Manual flash Compatible Shutter sync: front-curtain sync, rear- curtain sync and high-speed sync(HSS/FP), the highest sync speed is 1/8000s* Support remote set the parameters of flash through the transceiver (Remote Control Mode) Support E-TTL/Manual/Repeating flash mode mix using(Mix Control Mode) Support the flash installed on transmitter(on-top flash)and supports i-TTL function Support the use of master unit on transmitter sets the parameters of each group(Master Control Mode) Support FEC, FVL function Support modelling flash and red-eye reduction flash Support flash zooming (auto) Built-in AF assist beam emitter (AF Lamp) Settings saved automatically Compatible with Yongnuo/ Nikon series flashes Support PC port triggering strobe flashes PC port support front/rear curtain sync and high-speed sync(Super Sync)function Support single-contact of camera & flash triggering (max sync speed is 1/250s) YN622N-KIT  Suitable for (Camera): Nikon: D70 D70s D80 D90 D200 D300s D600 D700 D800 D3000 D3100 D3200 D5000 D5100 D5200 D5300 D7000 D7100 Flash compatible (i-TTL): (You should use it with YN-622N together) A: ETTL Flash: (It suport wireless remote control through camera menu) ---Nikon SB-910, SB-900, SB-800, SB-700, SB-600, SB-28, SB-27, SB-26, SB-25, SB-24 ---Yongnuo Flashes Nikon version: YN-568EX, YN-565EX, YN-500EX, YN-468II, YN-467II, YN-465 ---Other brand flashes working with Nikon system: Metz, Sunpak, Oloong, Triopo B: Other Flashes: (Not support TTL function or HSS) ---Yongnuo YN-560III, YN-560II, YN-560EX, YN-560, YN-460II, YN-460 ---Pentax AF-540 FGZ, AF-360 FGZ, AF-400 FT, AF-240 FT ---Sigma EF-500 DG Super, EF-500 DG ST, EF-430 ---Other brand flashes not for Nikon: Metz, Sunpak, Oloong, Triopo Package including: 1 x YN-622N-TX Controller 1 x YN-622N II Single Transceiver 1 x LS-2.5/N1 Shutter Connecting Cable 1 x LS-2.5/N3 Shutter Connecting Cable 2 x Manual in English I ONLY POST TO ADDRESSES IN SOUTH AFRICA - NO INTERNATIONAL SALES

Buy 5pcs USB To UART TTL Extension Cable Module 4 Pin 4P Serial Adapter Download Cable Module for Ra... for R399.00

The Phottix Odin II TTL Flash Trigger — with new cutting-edge technology and features. The Odin II interface and control system has been overhauled making it faster and easier to use. It features 5 groups with individual buttons and a control dial for quickly adjusting flash power levels. An AF assist light has been added for improved focusing in low light environments. With 32 channels and a new Digital ID function, the Odin II offers photographers a way to personalized their Odins and prevent triggering from other nearby triggers.This Odin II TTL Transmitter (TCU) is compatible with Nikon DSLRs and compatible flashes. It will also control the Phottix Indra and Mitros+ TTL Transceiver Flash.Use your TTL flash off camera with full TTL functionsHigh Speed Sync 1/8000s*Manual power and TTL EV adjustmentsChange flash zoom and modelling light powerDigital ID to eliminate interference, 10000 unique ID numbersLCD display for visual feedbackUSB port for firmware upgradesGroup buttons and control dial32 Channels5 Groups (A/B/C/D/E)2.4GHz frequency100m+ rangeAF Assist LightCompatible with Phottix Indra, Phottix Mitros+, Odin I, Strato II, Strato I, Atlas II*on compatible camerasIncludes: Odin II Transmitter for Nikon, 2x AA Battery, USB Cable, Bag, User Manual (USB)

The Phottix Odin II TTL Flash Trigger — with new cutting-edge technology and features. The Odin II interface and control system has been overhauled making it faster and easier to use. It features 5 groups with individual buttons and a control dial for quickly adjusting flash power levels. An AF assist light has been added for improved focusing in low light environments. With 32 channels and a new Digital ID function, the Odin II offers photographers a way to personalized their Odins and prevent triggering from other nearby triggers.This Odin II TTL Transmitter (TCU) is compatible with Canon DSLRs and compatible flashes. It will also control the Phottix Indra and Mitros+ TTL Transceiver Flash.Use your TTL flash off camera with full TTL functionsHigh Speed Sync 1/8000s*Manual power and TTL EV adjustmentsChange flash zoom and modelling light powerDigital ID to eliminate interference, 10000 unique ID numbersLCD display for visual feedbackUSB port for firmware upgradesGroup buttons and control dial32 Channels5 Groups (A/B/C/D/E)2.4GHz frequency100m+ rangeAF Assist LightCompatible with Phottix Indra, Phottix Mitros+, Odin I, Strato II, Strato I, Atlas II*on compatible camerasIncludes: Odin II Transmitter for Canon, 2x AA Battery, USB Cable, Bag, User Manual (USB)

Supported flash mode: i-TTL, manual flash. Support modeling flash and red-eye reduction flash. Built-in AF assist beam emitter(AF lamp). Support exposure compensation, flash value lock function(FVL). Settings saved automatically. Yongnuo YN-622N-TX TTL Wireless Flash Controller + 2PC YN-622N Trigger for Nikon Wireless Flash Controller: Specifications: System type: Digital FSK 2.4GHz wireless controller Distance: 100m Channel: 7 Flash mode: i-TTL, manual flash Sync mode: front-curtain sync, rear-curtain sync, hi-speed sync(auto FP) Groups: 3 groups(A/B/C) Sync speed: 1/8000s Input: Hotshoe Output: Hotshoe, PC port Shutter release interface: 2.5mm shutter release interface USB firmware upgraded: Support AF assist beam emitter: Support Applicable battery: 2 * AA battery(Support 1.2V rechargeable battery)(Batteries not included) Standby time: 120 hours 1 * N1 Shutter Cable 1 * N3 Shutter Cable 1 * User ManualEnglish & Chinese) Transceiver: Compatible with Yongnuo / Nikon series flashes. Support PC port triggering strobe flashes. PC port support front/rear curtain sync and high speed sync(super sync) function. Support single-contact of camera & flash triggering. (max sync speed is 1/250s) On compatible cameras/flash with TTL function. Compatible camera list: For Nikon D70/D70S/D80/D90/D200/D300/D300S/600/D700/D800/D3000 series/D5000 series/D7000 series Compatible i-TTL flash list: For YN465N/YN467N/YN-468N(II)/YN565N/YN568N For Nikon SB-400/SB-600/SB-700/SB-800/SB-900/SB-910 Specifications: System type: Digital FSK 2.4GHz wireless transceiver Distance: 100m Channel: 7 Flash mode: i-TTL, manual flash Sync mode: front-curtain sync, rear-curtain syce, hi-speed sync(auto FP) Groups: 3 groups(A/B/C) Sync speed: 1/8000s Input: Hotshoe Output: Hotshoe, PC port Applicable battery: 2 * AA battery(Support 1.2V rechargeable battery)(Batteries not included) Standby time: 60 hours

Buy PL2303HX USB to UART TTL RS232 Converter Serial Cable Module for R60.95

Profoto B1X 500W TTL Location KitFor the adventurous photographer who likes to get out there on location in the real world, B1X offers cordless, battery-powered freedom and flexibilityThe Profoto B1X off-camera flash is the successor of the award-winning Profoto B1. The B1X is no stay-at-home flash; it¿s for the adventurous photographer who likes to get out there on location in the real world. The portable B1X offers cordless, battery-powered freedom and flexibility. After all, there aren¿t many wall sockets in the middle of a desert or half way up a mountain. B1X provides you with easy light-shaping wherever and whatever your location might be thanks to its dedicated system of lightweight OCF Light Shaping Tools that are designed for maximum mobility and ease of use. It offers automatic TTL shooting that shines brightest in challenging lighting conditions. It offers HSS that enables you to control and shape light even in broad daylight. And it¿s fast to set up so you¿re free to explore and create stunning images. Let your imagination set the limits, not the length of your cables. The B1X gives you the power you need in all the right places. QUICK TO SET UP. EASY TO USE. The B1X is a fully cordless light with simple, intuitive controls and a large easy-to-read LED display. So instead of tripping over cables or fiddling with sub menus or user manuals, you can focus on being creative. CAPTURE THE MOMENT WITH AIRTTL Finding the right exposure the first time can be a challenge when time is limited or the light is constantly changing. AirTTL automatically does it all for you, just point and shoot. SHAPE LIGHT IN BROAD DAYLIGHT WITH HSS No matter how bright the sun shines, Profoto High-Speed Sync (HSS) enables you to use your flash at shutter speed s up to 1/8000s. Overpower the sun and shape your light even with large aperture s in broad daylight. BATTERY POWER YOU CAN RELY ON B1X¿S RECHARGEABLE Lithium-ion battery provides up to 325 flashes at full power and tens of thousands at lowest power. And it recharges in no time. MODELLING LIGHT WITH POWER & QUALITY A powerful LED modelling light enables you to preview your shot and evaluate how light and shadows fall on the subject. It is also useful as main or fill light in low light situations. EXPLORE YOUR LIGHT SHAPING POTENTIAL Photography is all about controlling and shaping light. With the B1X it is easy to take your creativity to the next level with our dedicated range of compact, lightweight OCF Light Shaping Tools. SPECIFICATIONS IN A NUTSHELL Max energy: 500 Ws Energy range: 9 f-stop s (2.0-10) TTL / HSS: Yes HSS energy range: (2.0-10) Modelling light output: 24 W LED with 2500 lumens output (equivalent to 130 W halogen) Modelling light CRI: >90 Battery capacity per charge: Up to 325 full power flashes / 120 minutes with max modelling light Nominal battery voltage/capacity Size: 31 x 14 x 21 cm Weight: 3 kg including the battery * Extended HSS range launched as firmware upgrade with B1X. B1 can get same range with free firmware upgrade from profoto.com ** New B1X battery is also compatible with B1. The old B1 battery is also compatible with B1X. WHAT'S IN THE BOX? 2× B1X 500 AirTTL 2x Li-Ion Battery MkII for B1/B1X 1× Battery Charger 4.5A including power cable 1x Car Charger 1.8A 1× Backpack M Limited 2-year warranty

Free shipping for orders over R1500.00  Specification Wireless (infrared) eTTL slave for Canon  Longest rage for wireless TTL connection indoors up to 25m and outdoors 15m, the slave flash needs optical contact to the master, bright sunlight can disturb the connection GN 58 at ISO 100 and 105mm Modes: TTL, Manual, Muli Optical slave modes S1 and S2, S2 suppresses the TTL metering flash Modeling light function for 1s if cameras depth of field button is pressed PC port for triggering by cable or by non hot shoe triggers Fast recycle time of approximately only 3 seconds after firing on full power (AA alkaline cell used) Read beep if charging has finished, can be turned off Metal foot Bounce card build in Rear-curtain sync FEC - flash exposure compensation +-5EV in 1/3 EV steps FEB - flash exposure bracketing for 3 pictures in a row FE lock (Canon) and FV lock (Nikon) supported for locking the flash exposure before recomposing the image and taking the final picture Slave groups: 3¿A, B, and C¿ Channels: 4 Auto and manual zoom: 24, 28, 35, 50, 70, 80, 105mm, compatible with full size and crop size sensors Wide angle diffuser for supporting focal length shorter 24mm to 18mm Vertical rotation angle: -7~90 degrees Horizontal rotation angle: 0~270 degrees Power supply: 4 x AA size batteries (Alkaline or Ni-MH are usable) Connector for an external battery pack e.g. Yongnuo SF-18C, SF-17C Color temperature: 5600k Flash time: 1/200s~1/20000s Flash control: 8 levels of output control (1/128~1/1), 22 levels of fine tuning Dimensions: 60×190×78mm (Extended state) Net weight: 380g Package Content 1 x YN-565EX1 x Mini stand1 x Manual in English and Chinese1 x Protection bag1 x Original packaging box

Note: When [Main Flash Control Key] switched to "S",the flash on the flash connecting side is TTL and have can achieve high speed sync. The flash on the camera connecting side is treated as slave which has no TTL and high sped sync. When [Main Flash Control Key] switched to"M",the flash on the camera connecting side is and have can achieve high speed sync. The flash on the flash connecting side is treated as slave which has no TTL and high sped sync. Cautions 1. Make sure the camera and flash are powered off before installing the Keibe. 2. As an electronic accessory this may be affected by rare environmental causes. Normal working operations should not be affected by this. 3. Drops or shocks will lead to product failure. 4. When not in use for long duration, please turned off the transmitter and the receiver's power and remove the battery. 5. The batteries should be installed correctly. Reverse polarity may cause batteries to leak corrosive liquids, heat or explosion. 6. When connecting the cable with the device, do not pull directly on the wires. 7. Do not store in a high temperature, such as an enclosed car under direct sunlight, the dashboard and other high- temperature areas. 8. Keep dry, do not contact wet hands with the product. Do not immerse in water or exposed to rain as this may lead to failure of the device. 9. Do not use near flammable gases. Failure to follow this warning may cause explosion or fire. 10. This product includes batteries; please strictly follow the instruction for proper operation. Failure to follow this may cause explosions, fire or personal injury. Package list: 1*1 meter flash off camera cord 1*manual

Note: When [Main Flash Control Key] switched to "S",the flash on the flash connecting side is TTL and have can achieve high speed sync. The flash on the camera connecting side is treated as slave which has no TTL and high sped sync. When [Main Flash Control Key] switched to"M",the flash on the camera connecting side is and have can achieve high speed sync. The flash on the flash connecting side is treated as slave which has no TTL and high sped sync. Cautions: 1. Make sure the camera and flash are powered off before installing the Keibe. 2. As an electronic accessory this may be affected by rare environmental causes. Normal working operations should not be affected by this. 3. Drops or shocks will lead to product failure. 4. When not in use for long duration, please turned off the transmitter and the receiver's power and remove the battery. 5. The batteries should be installed correctly. Reverse polarity may cause batteries to leak corrosive liquids, heat or explosion. 6. When connecting the cable with the device, do not pull directly on the wires. 7. Do not store in a high temperature, such as an enclosed car under direct sunlight, the dashboard and other high- temperature areas. 8. Keep dry, do not contact wet hands with the product. Do not immerse in water or exposed to rain as this may lead to failure of the device. 9. Do not use near flammable gases. Failure to follow this warning may cause explosion or fire. 10. This product includes batteries; please strictly follow the instruction for proper operation. Failure to follow this may cause explosions, fire or personal injury. Package list: 1*3.6 meter flash off camera cord 1*manual

USB To RS232 TTL UART PL2303HX Auto Converter USB to serial RS232 USB to 232 Converter Adapter PL2303HX MAX232 For Win7 or Linux Built-in TTL COM PC-PL2303HX Chip. Standard USB type A male and TTL 4 pin connector Simple and Easy way to give USB support to your designs Available for Linux, Mac, WinCE and Windows (XP, 2003), Vista Win 7 Black cable-----GND Green cable-----TXD White cable-----RXD Red cable -------VCC ​ Please Note: Locally stocked, Available for immediate shipping!

                              Viltrox OC-E3 TTL Off-camera Shoe Cord for Canon DSLR / Flashes Main Features:   - Flexible to direct light from a variety of angles. - Flash connector fitted with a tripod socket for added stability. - Maintains full TTL connection. - Reduces harsh shadows. Specifications: Cable length: Original: 0.8m, after stretching: 1.5m   Color: Black Use: Camera Package weight: 0.148 kg Package Size(L x W x H): 16.00 x 8.00 x 4.00 cm / 6.3 x 3.15 x 1.57 inches Package Contents: 1 x Viltrox OC-E3 TTL Off-camera Shoe Cord              

online mobile phones  ()            Canon EOS 60D Digital Camera body Eyecup Eb Wide Strap  USB Interface Cable  AVC-DC400ST Stereo AV Cable LP-E6 Rechargeable Lithium-Ion Battery Pack (7.2v, mAh) LC-E6 Battery charger EOS Digital Solution Disk and Instruction Manuals "Great Photography is Easy" Booklet "Do more with Macro Booklet" 1-Year Limited Warranty Canon EF-S mm f/ IS II SLR Lens - Mark II Canon EF-S mm F4-5.6 IS Zoom Lens Bower High-Power 500mm f/8.0 Telephoto Lens 58mm 2X Professional Telephoto Lens 58mm High Definition 0.45x Wide Angle Lens Zeikos ZE-CUmm Multi-Coated 4 piece Close-up Filter Set Bower SFD728C TTL Autofocus Flash for Canon E-TTL II Bower Digital Pro Sling SLR Backpack MINI-INFRARED REMOTE CONTROL FOR CANON 58mm Multi-Coated UV Filter 50-Inch Photo/Video Tripod Flexible Tripod 3 Piece Deluxe Cleaning kit Memory Card Wallet USB 2.0 Memory Card Reader Ultra Clear screen protectors    

Yongnuo YN-622C II E-TTL wireless flash trigger for Canon Specifications: Compared to the first version, YN-622C Mark II has more functions: The quick lock design, you can fasten the hot shoe of this flash trigger with your camera or flash. It supports USB Firmware upgraded. It supports 622C communication mode (YN-622C and YN-622C-TX) and (RF-605C, RF-603 II and YN560-TX) --- TTL mode, you can use YN-622C II, YN-622C, Canon version together, and when you use it with YN-622C-TX, it can be used as receiver. --- Manual mode,you can use YN-560TX, RF-603 II, RF-605C as transmitter, and use YN-622C II as receiver. Main functions: --- Quick Lock Design --- USB Firmware Upgrade --- YN-622C Communication and YN560-TX Communication mode --- flash mode: E-TTL (II) / Manual / Multi --- 1st Curtain, 2nd curtain, High Speed Sync (HSS / FP), Max 1 / 8000s Sync Speed --- Control Remote flash using camera's falsh control menu screen (Remote Control mode) --- E-TTL / Manual / Multi Flash mode mix using (Mix Control Mode) --- Flash on hot shoe of transmitter supports ETTL --- Flash Exposure compensation (FEC) --- Flash Exposure Bracketing (FEB) --- Flash Exposure Lock (FEL) --- modeling flash --- E-TTL Group ratio (ALL / A:B / A:B:C) --- Manual / Multi Group (ALL / A:B / A:B:C) --- flash zooming (auto, manual) --- AF assist beam emitter (AF Lamp) --- PC port Triggering strobe flashes and 1st, 2nd curtain / HSS --- LCD Live View triggering --- High-speed continuous shooting trigger --- Settings saved automatically --- Compatible with ALL Yongnuo / Canon EX II series flashs --- Single-contact of camera and flash triggering (Max sync. speed is 1/250s) --- Groups: A/B/C 3groups (YN-622C), A/B/C/D/E/F 6groups (YN560-RX) --- AA *2 (Support 1.2V rechargeable batteries) (Not Included) Note: Mark II has a PC Sync port for YN-622C transceiver, you can use RF-602 PC / PC Cable to connect it with flash, and use RF-603 II 6.35mm cable to work with Strobe flash. Suitable for: Camera: A: The Canon EOS DSLR camera with external flash control menu: Canon Canon 7D, 7D Mark II, 6D, 6D Mark II, 5D Mark II, 5D Mark III, 5D Mark IV, 1Ds Mark III, 1D Mark IV, 1D Mark III, 7D 60D 50D 40D 450D 500D 550D 600D 650D 700D 1000D 1100D 1200D 1300D B: The Canon EOS DSLR Camera without external flash control manual: Canon EOS 5D 10D 20D 30D 300D 350D 400D 1D 1D Mark II Flash: Compatible ETTL Flash: (It supports wireless remote control through camera menu) Canon 600EX (RT), 580EX II, 430EX II, 320EX, 270EX II Yongnuo YN600EX-RT, YN-568EX II, YN-565EX II C, YN-468 II C, YN-467 II C. Note: 430EX, 550EX and 580EX or other parts of flash is not supported remote control via the camera menu, you need to manually set the flash parameters. It also compatible with Yongnuo RF-605C, RF-603 II, YN560-TX in manual mode. Package including: 2 x RF-622C II transceivers 1 x Instruction Manual in English 1 x Original Yongnuo Box I ONLY POST TO ADDRESSES IN SOUTH AFRICA - NO INTERNATIONAL SALES

Feature: Note: This module does not suitable for IOS system. TTL data transparent transfer between a host Bluetooth device Build-in CSR company Bluetooth chip BC417143 Bluetooth specification v2.0 + EDR Works with any USB Bluetooth adapters Default Baud Rate: 9600, pairing code 1234, the working mode SLAVE Coverage up to 30ft Built in antenna Mini Size Using mainstream CSR Bluetooth chip, Bluetooth V2.0 protocol standards Serial module operating voltage 3.3V, 10 meters from the general The working current: pairing: 30mA ~ 40mA Sleep current: not sleep For GPS navigation systems, utility meter reading systems, industrial control systems mining site Can be used with a Bluetooth laptop computer plus a Bluetooth adapter, PDA and other devices to connect seamlessly   Specification: Power input: +3.3V DC Signal coverage: 30ft Size: 26.9 x 13 x 2.2mm Application: This module is mainly used for wireless transmission of data in the field a short distance. And PC can be easily connected Bluetooth device, you can also exchange data between two modules. Avoid cumbersome cable connections, direct serial cable replacement.   Package included: 3 x HC-06 30ft wireless bluetooth RF transceiver module