Ttl wireless flash

Supported flash mode: i-TTL, manual flash. Support modeling flash and red-eye reduction flash. Built-in AF assist beam emitter(AF lamp). Support exposure compensation, flash value lock function(FVL). Settings saved automatically. Yongnuo YN-622N-TX TTL Wireless Flash Controller + 2PC YN-622N Trigger for Nikon Wireless Flash Controller: Specifications: System type: Digital FSK 2.4GHz wireless controller Distance: 100m Channel: 7 Flash mode: i-TTL, manual flash Sync mode: front-curtain sync, rear-curtain sync, hi-speed sync(auto FP) Groups: 3 groups(A/B/C) Sync speed: 1/8000s Input: Hotshoe Output: Hotshoe, PC port Shutter release interface: 2.5mm shutter release interface USB firmware upgraded: Support AF assist beam emitter: Support Applicable battery: 2 * AA battery(Support 1.2V rechargeable battery)(Batteries not included) Standby time: 120 hours 1 * N1 Shutter Cable 1 * N3 Shutter Cable 1 * User ManualEnglish & Chinese) Transceiver: Compatible with Yongnuo / Nikon series flashes. Support PC port triggering strobe flashes. PC port support front/rear curtain sync and high speed sync(super sync) function. Support single-contact of camera & flash triggering. (max sync speed is 1/250s) On compatible cameras/flash with TTL function. Compatible camera list: For Nikon D70/D70S/D80/D90/D200/D300/D300S/600/D700/D800/D3000 series/D5000 series/D7000 series Compatible i-TTL flash list: For YN465N/YN467N/YN-468N(II)/YN565N/YN568N For Nikon SB-400/SB-600/SB-700/SB-800/SB-900/SB-910 Specifications: System type: Digital FSK 2.4GHz wireless transceiver Distance: 100m Channel: 7 Flash mode: i-TTL, manual flash Sync mode: front-curtain sync, rear-curtain syce, hi-speed sync(auto FP) Groups: 3 groups(A/B/C) Sync speed: 1/8000s Input: Hotshoe Output: Hotshoe, PC port Applicable battery: 2 * AA battery(Support 1.2V rechargeable battery)(Batteries not included) Standby time: 60 hours

Yongnuo YN-622C-TX YN622 LCD TTL Wireless Flash Controller For Canon Description: 3 Groups (A/B/C) Mix TTL, Remote Manual, and SuperSync Groups Sync mode (front-curtain sync, rear-curtain sync, Hi-speed sync (Auto FP)) Max Sync. Speed: 1/8000s Trigger Interface: Hot shoe, PC Individual 1/3rd stop Manual Power and FEC adjustment Remote Flash Zoom in 3 groups, and Auto Zoom 2nd Curtain Sync, HSS, SuperSync USB port for Firmware Updates AF Assist Light Remote Shutter Release Function Dedicated Buttons for Fast Adjustments Battery Level Indicator   Batteries Not Included ! I ONLY POST TO ADDRESSES IN SOUTH AFRICA - NO INTERNATIONAL SALES  

Buy Godox X2T TTL Wireless Flash Trigger for Panasonic Olympus for R2,499.99

Buy Godox XPro-C TTL Wireless Flash Trigger for Canon Cameras for R1,750.00

Buy Godox X2T-C TTL wireless flash trigger for Canon/Nikon/Sony/Fuji/Obas/, supports 1 / 8000s HSS funct for R1,959.00

Buy Yongnuo YN-622 TTL Wireless Flash Trigger Set for NIKON for R1,950.00

Buy Godox X2T 2.4 GHz TTL Wireless Flash Trigger for Fujifilm for R1,379.00

Buy Godox XProS TTL Wireless Flash Trigger for Sony Cameras for R1,769.00

Buy Yongnuo YN-622 TTL Wireless Flash Trigger Set for Canon for R1,750.00

Buy Godox XPro-C TTL Wireless Flash Trigger for Canon Cameras for R1,895.00

Buy Yongnuo YN-622 II TTL Wireless Flash Trigger Set for Canon for R1,950.00

Buy Yongnuo YN-622 II TTL Wireless Flash Trigger Set for NIKON for R1,950.00

Features:   Yongnuo YN568EX TTL flash is an upgraded version of YN565EX now supporting High-Speed synchronization of up to 1/8000s. Great choice for professionals and advanced amateur Nikon users. Yongnuo YN568EX is top of the line external flash for Nikon DSLR cameras. It is a great alternative to much more expensive Nikon SB900, SB910 or SB700 speedlites, offering the same functions and same or even more power at much lower price. High guide number (58m), TTL and HSS (high speed synchronization) make this an excellent tool for digital photography. Yongnuo YN568EX supports high speed sync flash – YN568EX is the first speedlite which supports high-speed flash synchronization; with high-speed sync (FP flash), the YN568EX can synchronize at all shutter speeds. The maximum shutter sync is up to 1/8000 Compatible with Nikon and Canon wireless flash system – One YN568EX is able to respectively accept internal flashing of YN568EX II, 580EX II, SB-910/900/800/700, 7D/70D/60D/600D/650D/700D, Canon commander of Nikon’s built-in flashing and ST-E2 wireless signal, achieving off camera TTL and manual flashing. Some functions such as wireless TTL flashing, grouping light ratio TTL flashing and the illumination of remote controlled flashing can be easily achieved if you carry a camera with built-in flash commander system and YN568EX only. High Guide Number TTL + High Speed Sync – GN58@ ISO100, 105mm; which reaches the level of the mainstream hot shoe flashes, supports HSS, TTL/M/Multi mode. Multiple triggering mode supported – The YN568EX can be triggered by the camera set-top, built-in or main-controlled flashing command, S1 and S2 (pre-flash-canceled mode). Supports auto/manual zooming – The covered focal length can be changed between auto, 24 - 105mm on the lamp adapter by operating the zoom button on the flash light, supporting full-frame/APS-C cameras. Comprehensively supports TTL functions – The YN568EX supports HSS, FEC, FEB, Rear-curtain sync (2nd curtain sync), FE lock, Modeling Light Extreme speed of charging recycle – The time for full power output current-return just takes 3 seconds; you can get fast current-return experience even without brand-new batteries, which just takes 4~5 seconds Equipped with 2.5mm PC Synchronisation interface – It makes things easier on lightening the flashlight synchronously by using PC synchronisation port. Sound prompting system – When the sound prompting system is enabled, the different sound alerts will prompt different working conditions of the flashlight so as to allow you to focus on shooting. Aperture preview – Press the camera’s aperture preview button, the YN568EX will send out continuous flash lasting one second for subjects imaging. Advanced options function – The YN568EX has advanced options settings function, where you can self-define the functions of the flashlight to suit your own requirements. Automatic saving settings – YN568EX can automatically save your current operating settings to convenient your next use. LCD display interface, modern appearance. C ompatible with:   For Nikon D600, D610, D810, D800E, D750, D700, D800, D300, D300S, D7000, D7100, D7200, D3000, D3100, D3200, D3300, D5100, D5000, D5200, D5300, D90, D80 and any other Nikon DSLR Camera   Specification s: Circuit design: Insulated Gate Bipolar Transistor (IGBT) Guide No.: 58 meters (ISO 100, 105mm) Flash mode: TTL, Manual, MULTI, Sc, Sn, S1, S2 Wireless triggering distance: 20~25m indoor, 10~15m outdoor Zoom range: 24, 28, 35, 50, 70, 80, 105mm Vertical rotation angle: -7~90 degrees Horizontal rotation angle: 0~270 degrees Power supply: 4 × AA size batteries (Alkaline or Ni-MH are usable) Lighting times: 100~1500 times (AA alkaline cell used) Recycle time: approx 3s (AA alkaline cell used) Color temperature: 5600k Flash duration: 1/200s~1/20000s Flash control: 8 levels of output control (1/128~1/1), 29 levels of fine tuning External interface: hot shoe, PC port Additional features: Rear-curtain sync, FEC, FEB, FEV, modeling flash, manual zoom, auto zoom, sound prompt, advanced setting, automatically saving setting, PC port, power saving mode and over heat protection Dimensions: 60 × 190 × 73mm (Extended state) Net weight: 380g Note: The battery is not included.   Package Include d:   1 x Yongnuo YN-568EX Flash Speedlite for Nikon 1 x Mini Stand 1 x Manual in English and Chinese 1 x Original Box 1 x Soft Case for Flash

|TTL Autoflash and Pro Functions|: Support TTL Autoflash, 1/8000s High-Speed Sync, Multi Flash, Manual Flash, Flash Exposure Compensation, TCM Transform Function, Magnfication Function, One-Shoot & Multi- Shoot Setting, Group Modeling Lamp Control, Group Zooming, Adjusting All Groups' Output Value Simultaneously, etc |SMART TCM BUTTON|: Long Press TCM Button can Transform the Flash Value in TTL Mode into the Power Output Value in M Mode; Short Press TCM Button Enables the Groups to be Switched Between the One-Group and Multi-Group Mode |Versatile Using Methods|: As a wireless Godox Flash Trigger/ Wireless Shutter Release Trigger/ Wireless Sony Speedlights Trigger/ Flash Trigger with 2.5mm Sync Cord Jack. Xpro-S Can Control the Sony Original Flashes Such as F42AM/HVL-45RM/HVL-F60M/HVL-F43M/HVL-F32M/F58AM When Using In Combination with Godox X1R-S Receiver(Sold Separately) |01-99 WIRELESS ID|: Only Achieve Triggering when the Channels and Wireless IDs of the Master and Slave unit are Set to the Same, Avoiding Signal Interference effectively |LARGE LCD Display|: 16 Groups and 32 Channels to Wirelessly Control and Trigger. Full Graphic Display of 5 Groups simultaneously

|TTL Autoflash and Pro Functions|: Support TTL Autoflash, 1/8000s High-Speed Sync, Multi Flash, Manual Flash, Flash Exposure Compensation, TCM Transform Function, Magnfication Function, One-Shoot & Multi- Shoot Setting, Group Modeling Lamp Control, Group Zooming, Adjusting All Groups' Output Value Simultaneously, etc |SMART TCM BUTTON|: Long Press TCM Button can Transform the Flash Value in TTL Mode into the Power Output Value in M Mode; Short Press TCM Button Enables the Groups to be Switched Between the One-Group and Multi-Group Mode |Versatile Using Methods|: As a wireless Godox Flash Trigger/ Wireless Shutter Release Trigger/ Wireless Olympus Panasonic Speedlights Trigger/ Flash Trigger with 2.5mm Sync Cord Jack |01-99 WIRELESS ID|: Only Achieve Triggering when the Channels and Wireless IDs of the Master and Slave unit are Set to the Same, Avoiding Signal Interference effectively |LARGE LCD Display|: 16 Groups and 32 Channels to Wirelessly Control and Trigger. Full Graphic Display of 5 Groups simultaneously

SINGLE Yongnuo YN-622C Wireless e-TTL Flash transceiver for Canon NEW Yongnuo YN-622C Wireless e-TTL Flash transceiver / Flash Trigger Supports High-speed Sync HSS for Canon Flash Speedlight to 1/8000s Features: Recommended use with YN-568ex HSS flash Speedlight for Canon Specification: Using Digital FSK 2.4GHz frequency band with 7 channels, it has three modes: i-TTL, Manual and RPT, and it can fire flashes at 360 degree direction, the operating range is 100 metres. It supports FEC, FVL, High-speed Sync, Front Curtain, Rear Curtain, modelling flash, i-TTL, Manual/RPT, Manual mode, Auto Zooming, AF Lamp. Main function: a) Support Full I-TTL Pass-through function when on camera 1)  Mount one YN-622N transceiver into the hot shoe of camera, and mount other transceiver into the hot shoe of flash, you can trigger the flash at any direction in TTL, Manual or RPT mode. 2)  Mount flash on hot shoe of YN-622N transceiver on camera, mount the second flash on other transceiver, both of flashes can be trigger at any direction in TTL, Manual or RPT mode. Note: Speedlight on hot-shoe of transmitter support i-TTL/ Manual / RPT b)  Shutter Sync 1)  High-speed Synchronous. The max. sync speed is 1/8000s, but some camera is just 1/4000s, and for those cameras and flashes who don't support HSS, the sync. speed is just 1/250s or less, different cameras have different Sync speed. 2)  Front Curtain Sync 3)  Rear Curtain Sync. c)  Remote Control Function The parameter of flashes on hot shoe of receivers can be set up remotely through the camera manual directly. d)  Supporting mixed mode. FEC; FVL Ratio and Shutter sync can be set in the camera side. Manual and Multi output need to be set on the flash Speedlight. e)  Work with Strobe Studio flash light in HSS function f)  Awaking function g)  Zoom Function h)  Support Single-contact of camera and flash triggering (the max. Sync. speed is 1/250s) i)  Flash Fire Ratio with e-TTL j)  Support 2pcs AA batteries, (1.2v rechargeable battery)  Stand-by time is 60hours. k)  Dimension: 89.5 * 53 * 39MM, net weight is 78g. Note: There is a PC Sync port for YN-622N transceiver, you can use RF-602 PC / PC Cable to connect it with flash. Specifications:  System type - Digital FSK 2.4GHz wireless transceiver Operating range  - 100M Channels - 7 Groups - 3Groups (A/B/C) Flash mode - i-T TL; Manual mode; RPT flash mode Sync mode - Front-curtain Sync, Rear-curtain Sync, High Speed Sync(Auto FP) Highest sync speed  - 1/8000s Support function  - FEC; FVL; i-TTL; Manual / RPT flash mode; flash zooming; AF assist beam emitter; PC port; triggering strobe flashes; Front curtain, Rear curtain/HSS; LCD Live view triggering; single-contact of camera; flash triggering Input - Hot-shoe (TTL, main contact) Output - Hoe shoe; PC port Applicable battery - AA*2 (support 1.2 rechargeable battery) Stand-by time - 60h Dimensions  - 89.5*53*39mm Weight - 78g  Note: There is a PC Sync port for YN-622C transceiver, you can use RF-602 PC / PC Cable to connect it Suitable for: Camera: A: The EOS DSLR camera with external flash control menu: Canon 7D, 7D Mark II, 6D, 6D Mark II, 5D Mark II, 5D Mark III, 5D Mark IV, 1Ds Mark III, 1D Mark IV, 1D Mark III, 7D 60D 50D 40D 450D 500D 550D 600D 650D 700D 1000D 1100D 1200D 1300D B: The EOS DSLR Camera without external flash control manual: Canon 5D 10D 20D 30D 300D 350D 1D 1D Mark II Flash: Compatible ETTL Flash: (It support wireless remote control through camera menu) Canon 600EX (RT), 580EX II, 430EX II, 320EX, 270EX II Yongnuo YN-565EX C, YN-468 II C, YN-467 II C, YN-465 C Note: 430EX and 580EX or other parts of flash is not supported remote control via the camera menu, you need to manually set the flash parameters. Package including: 1x RF-622 C transceiver 1x Flash Stand 1x Instruction in Chinese and English WE ONLY POST TO ADDRESSES IN SOUTH AFRICA - NO INTERNATIONAL SALES  

More Feautures FE lock 11 Customizable Functions Manual Flash 1/1 - 1/256 Power Modeling Light Status Control Adjusts the Flash Zoom Coverage for Each Group Selective Transmission of Data Conserves Energy and Battery Life Magnification Function Displays Details of Each Group Settings Global Adjustments to Exposure Values for Multi-Group in M Mode 5 Group Buttons and 4 Function Buttons Offer Convenient Manipulation Support Type-C USB Firmware Upgrade and Wireless Triggering by 2.5mm Sync Cord Jack

4 groups: A,B,C,D 4 Channels 150+ m range 1/250 sec. sync speed* Flash wake-up functions* Extra receivers for the Phottix Strato II system. The Phottix Strato II Multi 5-in-1 Wireless Trigger System gives photographers incredible control over their flashes and Moonlights. Four channels and four groups provide unparalleled control in the studio or on location.

Triopo TR-586EX Wireless Flash Mode TTL Flash Speedlight Speedlight For Canon Product description Introduction: The TR-586EX can Automatically zoom, wireless TTL, Wireless flash, Optical sensing, compatible with Canon wireless flash signals, / stroboscopic shoot/fast back after only 2.9 seconds/custom function/curtain sync   Features: TTL Flash Manual Flash Multi Flash Wireless slave unit function: Compatibility with the Canon wireless flash system. S1 S2 Light flashing mode Flash control by Camera (Only for the newest Canon Version) Rear-curtain Sync Voice prompt Custom function Power save mode Overheating protection Automatic save function Large size LCD display Manual, Auto zoom function Quick response: Full output recycle time only 2.9 seconds   Specification:  Circuit design: Insulated Gate Bipolar Transistor(IGBT)  Flash index:56(ISO100,180mm)  Flash coverage:18-180mm  Flash Mode: TTL,M,FEB,Slave,S1,S2,Multi  The wireless trigger: Wireless induction flash lighting  The wireless cited flash distance: Indoor 20-30meters,outdoor 10-15meters  Up and down whirl angel degree: 7-90 degree  Left and right whirl angel degree: 0-180 degree  Colour temperature:5500K  Flash time:1/200 seconds---1/20000 seconds  Recycle time:2.9 seconds  Lighting time:100---1500 times  Net Weight:375g   Compatible: Canon EOS 5D Mark II, III, IV,  1Ds Mark [IV / III / II / I], 1D Mark [III / II N/ II / I] 6D (Mark I, II, 5D, 7D (Mark I, II), 80D, 70D, 60D, 50D, 40D, 30D,760D, 750D, 77D, 700D, 650D, 600D, 550D, 500D, 450D, 400D, 350D, 300D, 1300D, 1200D, 1100D, 1000D, 100D etc. I ONLY POST TO ADDRESSES IN SOUTH AFRICA - NO INTERNATIONAL SALES  

Features: Supports C's optical transportation wireless master flash: In the optical transportation wireless flash shooting, the YN568EX III can be used as a master unit to trigger YONGNUO and C's EX series speedlite(except the YN585EX), and supports 4 channels, realize wireless TTL, manual flash and stroboscopic flash. Compatible with C and N's optical transportation wireless slave flash: One YN568EX III can respectively accept the master unit of YN600EX-RT II, YN568EX II, YN568EX III, 600EX(II)-RT, 580EX II, SB-910/900/800/700, Nikon internal flash and for Canon commander and wireless signal of 7D/60D/600D, realizes external TTL, manual flash and stroboscopic flash. GN58@ISO100, 105mm, and supports automatic & manual zooming(24-105mm): High index TTL flash, supports TTL, M, Multi flash; and supports supports automatic & manual zooming, the focal length can be varied between 24-105mm. Supports high speed sync(HSS) flash and with high speed recycling(2s) system: The YN568EX III can synchronize with all shutter speeds, realize TTL and manual flash, 1/8000s maximum shutter sync; and the recycling time for full output just takes 2 seconds. Multiple trigger modes, automatic settings saving and custom setting supported: YN568EX III can be triggered by the camera set-top, PC synchronization trigger and wireless optical trigger off the camera. Supports firmware upgrade: The YN568EX III is equipped with USB interface, you can download the latest firmware from YONGNUO official website to upgrade the speedlite. Equipped with large-size LCD display and 2.5mm PC interface, and supports the battery remaining power real-time display, convenient to use. Specifications: Circuit design: Insulated Gate Bipolar Transistor (IGBT) Guide No.: 58 (ISO 100, 105mm) Flash mode: TTL, M, Multi Trigger mode: On-camera, Sc, Sn, S1, S2 Zoom range: 24, 28, 35, 50, 70, 80, 105mm Vertical rotation angle: -7~90 degrees Horizontal rotation angle: 0~270 degrees Power supply: 4 x AA batteries(not included; Alkaline or NI-MH are usable) Lighting times: 100~1500 times (with AA alkaline battery) Recycle time: Approx. 2s (with new AA alkaline battery) Color temperature: 5600k Flash time: 1/200s~1/20000s Flash control: 8 levels of output control (1/128~1/1), 29 levels of fine tuning in total External interface: hot shoe, PC port, USB port Wireless triggering distance: 20~25m indoors, 10~15m outdoors Additional features: Master flash, High speed sync, Rear-curtain sync, FEC, FEB, FE lock, electric zoom of flash head, sound prompt, auto-save setting, PC sync, USB port, power saving mode, overheating protection, advanced options setting. Item Size: 6.2 x 7.2 x 18.8cm/ 2.4 x 2.8 x 7.4in(Extended state) Item weight: 383g/ 13.5oz Package size: 21.5 x 9.5 x 8cm / 8.5 x 3.7 x 3.1in Package weight: 565g / 1.2lbs Compatible with: Hot shoe TTL mode: For Nikon D7400 D7300 D7200 D7100 D5600 D5500 D5400 D5300 D5200 D5100 D5000 D3500 D3400 D3300 D3200 D3100 D3000 D700 D800E D800 D810 D610 D750 D300s D200 D100 D80 D90 D40 D40x D60 D4 D3. Wirelss TTL Slave mode: For Nikon Commander SU-800 For Nikon SB-910, SB-900, SB-800, SB-700, Commander SU-800 Camera with CLS i-TTL system: D4, D3x, D3s, D3, D2x, D700, D300s, D300, D200, D7000, D90, D80 For Canon 7D 6D 600D 650D For Canon Flash 580EX II For Canon ST-E2 Commander Package Included: 1 x YN568EX III Speedlite 1 x Mini Stand 1 x Protecting Bag 1 x User Manual(English & Chinese)

Triopo TR-586EX Wireless Flash Mode TTL Speedlite For Nikon D750 D800 D3200 D7100 DSLR Camera Features: New Arrival Flash Speedlite, it's designed for Nikon DSLR Camera. Wireless slave unit function: compatibility with the Nikon wireless flash system, realize TTL from machine, manual and frequency flash. Wireless trigger sensors: Remote sensing CELL 2 mode for off-camera TTL flash sync. Increase the external power outlet: TR series adds an external power outlet, call back the higher rate to meet your needs. Quick call back: full output only 2.9 seconds recycle time, do not apply the new battery can also call back to obtain a rapid rate, only 4-5 seconds. Support high-speed continuous shooting: 1/16 and below the brightness, TR series to support high-speed continuous shooting 12EPS. Power-saving mode: When the flash without any action on the backlight turned off after 20 seconds, 60 seconds when the flash does not work, CPU automatically goes to sleep does not work more than 30 minutes, CPU will automatically shut down. High-precision output: from 1/128 to 1/1, 8 stalls to lose, each stall has two fine-tuning compensation. Overheat protection: built-temperature detection (thermal protection) Support second-curtain sync: use a slow shutter for making smear subject, the flash will be off the moment the shutter flash spill, this is the rear-curtain sync function. With soft box, mini stand and protective bag. Specification: Guide Number 56 meters (ISO 100, 180mm) Circuit Design Insulated Gate Bipolar Transistor (IGBT) Flash Mode TTL / M / FEB / Slave (S1/S2) / Multi Wireless Trigger Wireless induction triggering Wireless Trigger Cited Flash Distance Indoor 20-30 meters outdoor 10-15 meters Slave Group and Unit 4 slave channels(1,2,3,4); 3 slave unit group(A, B, C) Zoom Range 18mm, 24mm, 28mm, 35mm, 50mm, 70mm, 85mm, 105mm, 135mm, 180mm Vertical Rotation Angle Horizontal Rotation Angle 0 to 180 degrees Power

 1 x Yongnuo YN-622C E-TTL Wireless Flash Trigger Transceiver for Canon Yongnuo First Wireless E-TTL Flash Trigger YN-622 C is Released now, it's designed for Canon Camera. Using Digital FSK 2.4GHz frequency band with 7 channels, it has three mode, E-TTL (II), Manual and Multi, and it can fire flashes at 360 degree direction, the operating range is 100 metres. It supports FEC, FEB, FEL, High-speed Sync, 1st. Curtain, 2nd. Curtain, Modeling flash, ETTL II Group Ratio (ALL/A:B/A:B C), Manual/Multi group (ALL/ A:B/ A:B:C), Manual and Multi mode, Auto Zooming, Manual Zooming, AF Lamp. Main function: a), Support Full ETTL Pass-through function when on camera 1), Mount one YN-622C transceiver into the hot shoe of camera, and mount other transceiver into the hot shoe of flash, you can trigger the flash at any direction in TTL, Manual or Multi mode. 2), Mount flash on hot shoe of YN-622C transceiver on camera, mount the second flash on other transceiver, both of flashes can be trigger at any direction in TTL, Manual or Multi mode. Note: Speedlites on hot-shoe of transmitter support ETTL II / Manual / Multi b), Shutter Sync 1), High-speed Synchronous The max. sync speed is 1/8000s, but some camera is just 1/4000s, and for those cameras and flashes who don't suport HSS, the sync. speed is just 1/250s or less, different cameras have different Sync speed. 2), 1st. Curtain Sync 3), 2nd. Curtain Sync. c), Remote Control Function The parameter of flashes on hot shoe of receivers can be set up remotely through the camera manu directly. d), Supporting mixed mode. With this function, you can trigger remote speedlites in different modes, set up one YN-622C transceiver on hot shoe of flash in TTL mode, set up the second YN-622C transceiver on hot shoe of flash in manual mode, and the third YN-622C transceiver on hot shoe of flash in multi mode, all three flashes can be fired via the transceiver on hot shoe of camera, this mode is especially useful for those camera bodies without a built-in flash menu. (you need to set the parameters on speedlites) Note: Only FEC, FEB, Ratio and Shutter sync can be set in the camera side. Manua and Multi output need to be set on the flash speedlite. e), Work with Strobe Studio flash light in HSS function You can buy a PC Sync Cable RF-603 6.35mm cable to connect the transceiver with the studio flash, and then youcan use the non-high speed sync flash torealize hihger syand then you can use them together in HSS. The max. trigger voltage is less than 300 Voltage. Note: The PC port is for output using only. f), Awaking function When half-pressing the shutter button of the camera, the hot shoe flash on the receiver will be awakened. (for those flash has wake up function) g), Zoom Function Zoom Automatic: length will be charnged depanding on the changes of lens. Zoom Manual: Zoom length is within 24 - 105mm Zoom Lock h), Support Single-contact of camera and flash triggering (the max. Sync. speed is 1/250s) You can use it with Nikon camera or Nikon flash, but you just need to set up YN-622C in manual mode. i), Flash Fire Ratio with ETTL You can set up different flash fire ratio and FEC for those flashs on hot shoe of receiver. j), Support 2pcs AA batteries, (1.2v rechargeable battery), Stand-by time is 60hours. k), Dimension: 89.5 * 53 * 39MM, net weight is 78g. Note: There is a PC Sync port for YN-622C transceiver, you can use RF-602 PC / PC Cable to connect it with flash. Suit for: Camera: A: The EOS DSLR camera with external flash control menu: Canon 5D Mark II, 5D Mark III, 1Ds Mark III, 1D Mark IV, 1D Mark III, 7D 60D 50D 40D 450D 500D 550D 600D 650D 1000D 1100D B: The EOS DSLR Camera without external flash control menu: Canon 5D 10D 20D 30D 300D 350D 1D 1D Mark II If you use the Canon Speedlite 430EX or 580EX (not mark II) or an older camera without the Flash Control menu then you will have to make settings by hand. Older cameras that don’t have the same Flash Control menu include the original 5D, 10D, 20D, 30D, 300D, 350D, 1D and 1D Mark II. Flash: Compatible ETTL Flash: (It suport wireless remote control through camera menu) Canon 600EX (RT), 580EX II, 430EX II, 320EX, 270EX II Yongnuo YN-565EX C, YN-468 II C, YN-467 II C, YN-465 C (Our yongnuo flash units don't support HSS Function) Note: 430EX and 580EX or other parts of flash is not supported remote control via the camera menu, you need to manually set the flash parameters. Q&A How does wireless E-TTL ratio control work? Set the desired group – A, B or C – on each of your YN-622C transceivers On your Canon EOS DSLR, hit [Menu] > Flash control > External flash func. setting > Wireless func. > Enable. If you have a flash on top of your on-camera YN-622C unit, select Master flash > Enable if you want it to fire, otherwise it won’t. It will behave like an off-camera flash in group A. In the External flash func. setting > Channel menu, pick your channel (1-4). The YN-622C transceivers can actually be set to more channels than the menu supports. To pick channels 5, 6 or 7, select it directly using the buttons on the on-camera YN-622C transceiver. Pick your ratio control mode from the External flash func. setting > Firing group menu. You have the choice of All (A+B+C), A:B or A:B C. In “All”, there are no ratios and each flash fires at the same power level (this is the same as having ‘Wireless func.’ disabled). In the other modes you can select ratios from 8:1 to 1:8 for the groups in 1/2-stop increments. Check your camera user manual for more details. Wireless ratio control in the Flash control menu with the YN-622C How does wireless manual control work? The set-up is similar to E-TTL ratios, but in External flash func. setting > Flash mode you pick “Manual” instead of “E-TTL II”. You will then be able to set each of your independent flash groups – A, B or C – to manual power levels from 1/1 to 1/128. Wireless manual control in the Flash control menu with the YN-622C Package including: -1 x YN-622C transceivers. (DON'T come with retail packing,Since Yongnuo not launch 1PC retail box.We will send in sealed bubble bag.) Note: Camera & Flash & Batteries not included

The Triopo Flash has more features than some Original Nikon & Canon Flashes Description: New Arrival Flash Speedlite, it's designed for Nikon DSLR Camera. Wireless slave unit function: compatibility with the Nikon wireless flash system, realize TTL from machine, manual and frequency flash. Wireless trigger sensors: Remote sensing CELL 2 mode for off-camera TTL flash sync. Increase the external power outlet: TR series adds an external power outlet, call back the higher rate to meet your needs. Quick call back: full output only 2.9 seconds recycle time, do not apply the new battery can also call back to obtain a rapid rate, only 4-5 seconds. Support high-speed continuous shooting:1/16 and below the brightness, TR series to support high-speed continuous shooting 12EPS. Power-saving mode: When the flash without any action on the backlight turned off after 20 seconds, 60 seconds when the flash does not work, CPU automatically goes to sleep does not work ore than 30 minutes, CPU will automatically shut down. High-precision output: from 1/128 to 1/1, 8 stalls to lose, each stall has two fine-tuning compensation. Overheat protection: built-temperature detection (thermal protection) Support second-curtain sync: use a slow shutter for making smear subject, the flash will be off the moment the shutter flash spill, this is the rear-curtain sync function. With soft box, mini stand and protective bag. Specifications: Guide number: 56 meters (ISO 100, 180mm) Circuit design: Insulated Gate Bipolar Transistor (IGBT) Flash mode: TTL / M / FEB / Slave (S1/S2) / Multi Wireless trigger:Wireless induction triggering Wireless trigger cited flash distance: Indoor 20-30 meters, outdoor 10-15 meters Slave group and unit: 4 slave channels(1,2,3,4); 3 slave unit group(A, B, C) Zoom range: 18mm, 24mm, 28mm, 35mm, 50mm, 70mm, 85mm, 105mm, 135mm, 180mm Vertical rotation angle: -7 to 90 degrees Horizontal rotation angle: 0 to 180 degrees Power: 4 * AA Batteries(not included) Flash control: 22 grade high-speed control(1/128-1/1) Recycle time: approximately 3s (AA alkaline cell used) Lighting time:100-1500 times (using AA alkaline cell) Color temperature: 5500K Flash time: 1/200s~1/20000s Additional function: PC synchronous, sniff mode, over-temperature protection.

Godox AD200 TTL Pocket Flash KitThe AD200 TTL Pocket Flash Kit from Godox is built around a unique flash light source that has a standard speedlight head and a bare bulb head that give you the option of 2 distinctly different qualities of light. The kit comes with the 2 heads, lithium battery, charger and a carry case. The speedlight head outputs the standard look of an on-camera flash that can be modified using an optional softbox, beauty dish or umbrella. The bare bulb head features a removable flash tube and produces 360 degrees of soft, bright, nearly shadowless light. The head uses optional reflectors that focus the beam angle and give you directional control. The AD200 has impressive core features such as 200 Ws of power adjustable in 8 steps from 1/128 to 1/1, recycling from 0.01 to 2.1 seconds and flash durations as short as 1/11,300 sec. The flash runs on a removal rechargeable lithium battery that will give you up to 500 full power flashes and thousands of lower power flashes.The AD200 has 3 flash modes: Manual, TTL, and Multi (Stroboscopic). Manual outputs the user's choice of power, modeling light, first or second curtain sync, etc. Multi controls the stroboscopic rate up to 90 times (90 Hz). TTL takes advantage of the flash head's built-in X1 receiver. Optional X1 TTL transmitters are available for Nikon, Canon, Sony, Olympus, Panasonic and Fuji cameras. They will also detect a separately purchased LED head. The 32-channel wireless system controls flash mode, first and second curtain sync, High-speed sync up to 1/8000 sec, power level, modeling lamp and ready beeper at distances up to 328'. Firmware updates are obtainable on the Godox website.Built-In 2.4 GHz Wireless X System Built-in wireless receiver: control triggering power level, alert beep with optional wireless transmitter. Compatible with Nikon, Canon, Sony, Olympus, Panasonic and Fuji TTL. Bare Bulb and Speedlight Flash Heads Bare bulb and speedlite flash heads are included to vary your quality of light. Color temperature is a steady 5600K over the entire power range. Large Capacity Lithium Battery Pack The 14.4 V / 2900 mAH battery pack gets 500 full power flashes with 0.01 to 2.1 sec. recycling. AV Panel Easily readable digital panel displays your adjustments Accessories Barn Doors, color filters and diffusers are available to personalize your work. Numerous Control Functions 8-step power range: 1/1 to 1/128 Supports flash exposure compensation 1/8000 sec high-speed Sync First and second curtain sync Modeling lamp Manual flash Multi flash Custom functions

Descriptions: Completely Compatible with YONGNUO YN622C and RF-603 Wireless System: YN685 supports respectively receiving wireless triggering signal from YN622C, YN622C-TX, YN560IV, YN560-TX, RF605, RF603II and RF603. Remote Control Off-camera Parameters of Each Group: The flash mode, flash intensity, focal length and sync mode (YN622C wireless system only) of the speed-lite in each group can be controlled remotely through YN622C transceiver and YN560IV/YN560-TX. GN60@ISO100,200mm: YN685 is a 2.4G wireless speed-lite of high guide number, which supports TTL, M and Multi mode. High Speed Sync (HSS): When HSS function is activated, this speed-lite YN685 can be used with every shutter speed and the maximum sync speed is up to 1/8000s. Note: The camera and transceiver should support HSS function. Ultra fast Charging Recycle System, supporting External Power Supply: The recycling time is 3 seconds when the power output is set to maximum. The recycling time is about 4~5 seconds even this speed-lite is used without using fresh batteries. In addition, you can use the external power supply to meet your higher charging recycle need. Supports Auto/Manual Zooming: YN685 supports auto and manual zooming, and the flash coverage can be changed between 20~200mm. Supports Sound Prompt Function, Custom Settings (Fn.) and Auto Save Settings. Equipped with Big Size LCD Display Screen, standard PC Synchronous Interface. Specifications: Wireless Slave Mode: YN622C Wireless System (there are total 7 channels and 3 groups) Remote Control mode: the remote control mode of YN685 is compatible with the master unit is YN622C-TX, the master unit is YN-622C, and the YN-622C has been enabled the remote control mode. Mix mode: the remote control mode of YN685 is compatible with the master unit is YN-622C, and the YN-622C has been enabled the mix mode RF-603 Wireless System (there are total 16 channels and 6 groups) t can receive the wireless trigger signal from YN-560 IV, YN560-TX, RF-605, RF-603 II Multi-flash Wireless Flash Configuration Wireless flash of two slave units made up by YN685 Wireless flash of multiple slave units made up by YN685 Compatible with: Hot shoe TTL mode:For Canon 1Dx, 1Ds series, 1D series, 5DIII, 5DII, 5D, 7D, 7DII 70D, 60D, 50D, 40D, 30D, 20D, 700D, 750D 650D/T4i, 600D/T3i, 550D/T2i, 500D/T1i, 450D/Xsi, 400D/Xti, 350D,100D, 1100D, 1000D, 1200D Wirelss TTL Slave mode:For Canon 5DIII 7D 70D 60D 700D 650D 600D, Yongnuo ST-E2, for Canon 580EX II Wireless Manual (RF-603 mode) System Yongnuo YN-560IV, YN560-TX, RF-605, RF-603 II ALL DSLR Standard Hot shoe Camera Package Included: 1 x Yongnuo YN685 Flash speedlite 1 x Protecting bag 1 x Mini Stand 1 x Manual in English and Chinese 1 x Original Retail Box

Yongnuo YN-622N II Wireless Flash Trigger Receiver TTL for Nikon D4 D7000 The new upgrade version YN622N II supports receiving the trigger signal of the YN560-TX/ RF605 (603MODE)/ RF603II Series products, with multi aspects improved, equipped with quick lock design and supports USB firmware upgrade. Specification We added the quick lock design, you can fasten the hot shoe of this flash trigger with your camera or flash. It supports USB Firmware upgraded. It supports YN-622N, YN-622N-TX, RF-605N, RF-603 II and YN560-TX communication mode. **TTL mode (622 mode), you can use YN-622N, YN-622N II, YN-622N-TX together, ***Manual mode (603-RX mode), you can use YN-560TX, RF-603 II, RF-605N as transmitter, and use YN-622N II as receiver. Main Function *Quick lock design *Supports USB firmware upgrade *Supports "622" communication mode,"603-RX" communication mode *Compatible flash mode: i-TTL, Manual flash *Compatible Shutter sync: front-curtain sync, rear- curtain sync and high-speed sync(HSS/FP), the highest sync speed is 1/8000s* *Support remote set the parameters of flash through the transceiver (Remote Control Mode) *Support i-TTL/Manual/Repeating flash mode mix using(Mix Control Mode) *Support the flash installed on transmitter(on-top flash)and supports i-TTL function *Support the use of master unit on transmitter sets the parameters of each group(Master Control Mode) *Support FEC, FVL function *Support modeling flash and red-eye reduction flash *Support flash zooming (auto) *Built-in AF assist beam emitter (AF Lamp) *Settings saved automatically *Compatible with YongNuo/ Nikon series flashes *Support PC port triggering strobe flashes *PC port support front/rear curtain sync and high-speed sync(Super Sync)function *Support single-contact of camera & flash triggering (max sync speed is 1/250s) Suitable With Camera: -D70 D70S D60 D80 D90 D4 D3X D3S D3 D2X D40X D40 -D800E D800 D700 D600series D300S D300 D200 -D7000 D5300 D5200 D5100 D5000 D3200 D3100 D3000 Flash compatible (i-TTL): -SB600 SB700 SB800 SB900 SB910 -YN467N YN468N(II) YN560II YN560III YN565N YN568N Package Include - 2 x YN-622N II Transceivers -1 x Instruction in English and Chinese -1 x Original Yongnuo Box Note:Batteries & Camera &Flash not included 

Yongnuo YN-622C II E-TTL wireless flash trigger for Canon Specifications: Compared to the first version, YN-622C Mark II has more functions: The quick lock design, you can fasten the hot shoe of this flash trigger with your camera or flash. It supports USB Firmware upgraded. It supports 622C communication mode (YN-622C and YN-622C-TX) and (RF-605C, RF-603 II and YN560-TX) --- TTL mode, you can use YN-622C II, YN-622C, Canon version together, and when you use it with YN-622C-TX, it can be used as receiver. --- Manual mode,you can use YN-560TX, RF-603 II, RF-605C as transmitter, and use YN-622C II as receiver. Main functions: --- Quick Lock Design --- USB Firmware Upgrade --- YN-622C Communication and YN560-TX Communication mode --- flash mode: E-TTL (II) / Manual / Multi --- 1st Curtain, 2nd curtain, High Speed Sync (HSS / FP), Max 1 / 8000s Sync Speed --- Control Remote flash using camera's falsh control menu screen (Remote Control mode) --- E-TTL / Manual / Multi Flash mode mix using (Mix Control Mode) --- Flash on hot shoe of transmitter supports ETTL --- Flash Exposure compensation (FEC) --- Flash Exposure Bracketing (FEB) --- Flash Exposure Lock (FEL) --- modeling flash --- E-TTL Group ratio (ALL / A:B / A:B:C) --- Manual / Multi Group (ALL / A:B / A:B:C) --- flash zooming (auto, manual) --- AF assist beam emitter (AF Lamp) --- PC port Triggering strobe flashes and 1st, 2nd curtain / HSS --- LCD Live View triggering --- High-speed continuous shooting trigger --- Settings saved automatically --- Compatible with ALL Yongnuo / Canon EX II series flashs --- Single-contact of camera and flash triggering (Max sync. speed is 1/250s) --- Groups: A/B/C 3groups (YN-622C), A/B/C/D/E/F 6groups (YN560-RX) --- AA *2 (Support 1.2V rechargeable batteries) (Not Included) Note: Mark II has a PC Sync port for YN-622C transceiver, you can use RF-602 PC / PC Cable to connect it with flash, and use RF-603 II 6.35mm cable to work with Strobe flash. Suitable for: Camera: A: The Canon EOS DSLR camera with external flash control menu: Canon Canon 7D, 7D Mark II, 6D, 6D Mark II, 5D Mark II, 5D Mark III, 5D Mark IV, 1Ds Mark III, 1D Mark IV, 1D Mark III, 7D 60D 50D 40D 450D 500D 550D 600D 650D 700D 1000D 1100D 1200D 1300D B: The Canon EOS DSLR Camera without external flash control manual: Canon EOS 5D 10D 20D 30D 300D 350D 400D 1D 1D Mark II Flash: Compatible ETTL Flash: (It supports wireless remote control through camera menu) Canon 600EX (RT), 580EX II, 430EX II, 320EX, 270EX II Yongnuo YN600EX-RT, YN-568EX II, YN-565EX II C, YN-468 II C, YN-467 II C. Note: 430EX, 550EX and 580EX or other parts of flash is not supported remote control via the camera menu, you need to manually set the flash parameters. It also compatible with Yongnuo RF-605C, RF-603 II, YN560-TX in manual mode. Package including: 2 x RF-622C II transceivers 1 x Instruction Manual in English 1 x Original Yongnuo Box I ONLY POST TO ADDRESSES IN SOUTH AFRICA - NO INTERNATIONAL SALES

Godox TT685S TTL LCD Flash Speedlite for Sony DSLR Camera Features: Fully Support front and rear curtain sync, FEC, Multi flash, Manual flash, TTL/M/Multi/S1/S2 modes, 20-200mm auto/manual zooming etc. GN60, 22 steps of power output(1/1~1-128); Approx.0.1-2.s recycle time, 230 full power flashes(using 2500mA Ni-MH batteries). With C.fn cutom function settings. Optical transmission with even illuminatin and stable output. 2.4G wireless trnasmission with all-in-one functions and 100 meters further transimission. With dot-matrix LCD panel to offer clear and easy operation. Use 4 function buttons to change various settings according to different situations. TT685S is compatibe with S0ny Wireless Lighting System(WL). As a mster unit TT685S can control Sony cameras flashes e.g. HVL-F60M, HVL-F43M and HVL-F32M via wireless. As a slave unit, TT685S can be controlled by wireless signals of S0ny camera flashes e.g. HVL-F60M, HVL-F43M and HVL-F32M. Package Included: 1x TT685S Camera Flash 1x Mini Stand 1x Protection Bag 1x User Manual Detail Pictures: