Cactus wireless flash

2x V5 Transceivers Frequency Self-Tune Wireless Range: up to 328' Sync Speeds up to 1/1,000 Sec. Triggers Cameras or Flashes Overview The Wireless Flash Transceiver V5 Duo from Cactus is a 16 channel, 2-transceiver set that will trigger your flash or camera wirelessly at distances up to 328'. Each unit features a hot shoe foot and a female hot shoe for on- camera use with or without a flash mounted on it. A 1/4"-20 female thread on the underside of the transceiver allows mounting to a stand, clamp or other accessory, while the included mini-pin cable and phono plug adapters facilitate connection to remote devices. Sync speeds up to 1/1,000 sec. are possible with capable cameras. With 4-pack of 1000mAh Watson AAA NiMH Rechargeable Batteries is a package of 4 AAA size nickel-metal hydride (NiMH) rechargeable batteries. Each has a voltage of 1.2V and a capacity of 1000mAh. In the box Cactus Wireless Flash Transceiver V5 Duo 2 x V5 Transceiver 2 x Flash Stand FS-2 Cable (1/8"/3.5mm) Plug Adapter (1/4"/6.35mm) 4 x AAA Battery When Light Dances 2 Album YesUser Manual Limited 1-Year Watson AAA NiMH Rechargeable Batteries (1000mAh) - 4-Pack Limited 1-Year

Buy Cactus wireless flash set RF60 + V6 Transiever - Works on any camera brand for R3,500.00

Buy *As New* Cactus Wireless Flash RF60X *SPARES OR REPAIRS* RF60 Strobe Canon Nikon Fujifilm Sony for R499.00

Perfect condition, as it was only used for one photoshoot. Reason for selling: prefer shooting with natural light only so I never use them. CONTENTS: • 2x Cactus V5 Transceivers • 2x Flash Stands (FS-5) • 1x 3.5mm Plug Cable (CA-x 6.35mm Plug Adapter (PA-x PC Sync Cable (CA-x AAA 1.5V batteries • English User Manual • Comes in original packaging SPECIFICATIONS: • Working radio frequency: 2.4GHz; • 16 channels selectable; • Support sync speed: up to second (subject to camera’s sync speed limitation); • Compatible with all DSLR and SLR cameras with standard ISO hot shoe or PC sync output; • Compatible with portable flashes and studio strobes; • Low battery indicator; • Maximum effective area: 100 meters (328 feet); • Operating temperature: -20°C to +50°C (-4°F to 122°F); • Flash voltage handling: up to 300V; • Camera voltage handling: up to 6V; • Power input: 2 x AAA 1.5V batteries; • Connection port: 3.5mm (1/8") mono mini-phone; • Standard 1/4" screw mount; • Dimensions: 82mm (L) x 70mm (W) x 37mm (H); • Weight: 58g; CASH ONLY!!

 1 x Yongnuo YN-622C E-TTL Wireless Flash Trigger Transceiver for Canon Yongnuo First Wireless E-TTL Flash Trigger YN-622 C is Released now, it's designed for Canon Camera. Using Digital FSK 2.4GHz frequency band with 7 channels, it has three mode, E-TTL (II), Manual and Multi, and it can fire flashes at 360 degree direction, the operating range is 100 metres. It supports FEC, FEB, FEL, High-speed Sync, 1st. Curtain, 2nd. Curtain, Modeling flash, ETTL II Group Ratio (ALL/A:B/A:B C), Manual/Multi group (ALL/ A:B/ A:B:C), Manual and Multi mode, Auto Zooming, Manual Zooming, AF Lamp. Main function: a), Support Full ETTL Pass-through function when on camera 1), Mount one YN-622C transceiver into the hot shoe of camera, and mount other transceiver into the hot shoe of flash, you can trigger the flash at any direction in TTL, Manual or Multi mode. 2), Mount flash on hot shoe of YN-622C transceiver on camera, mount the second flash on other transceiver, both of flashes can be trigger at any direction in TTL, Manual or Multi mode. Note: Speedlites on hot-shoe of transmitter support ETTL II / Manual / Multi b), Shutter Sync 1), High-speed Synchronous The max. sync speed is 1/8000s, but some camera is just 1/4000s, and for those cameras and flashes who don't suport HSS, the sync. speed is just 1/250s or less, different cameras have different Sync speed. 2), 1st. Curtain Sync 3), 2nd. Curtain Sync. c), Remote Control Function The parameter of flashes on hot shoe of receivers can be set up remotely through the camera manu directly. d), Supporting mixed mode. With this function, you can trigger remote speedlites in different modes, set up one YN-622C transceiver on hot shoe of flash in TTL mode, set up the second YN-622C transceiver on hot shoe of flash in manual mode, and the third YN-622C transceiver on hot shoe of flash in multi mode, all three flashes can be fired via the transceiver on hot shoe of camera, this mode is especially useful for those camera bodies without a built-in flash menu. (you need to set the parameters on speedlites) Note: Only FEC, FEB, Ratio and Shutter sync can be set in the camera side. Manua and Multi output need to be set on the flash speedlite. e), Work with Strobe Studio flash light in HSS function You can buy a PC Sync Cable RF-603 6.35mm cable to connect the transceiver with the studio flash, and then youcan use the non-high speed sync flash torealize hihger syand then you can use them together in HSS. The max. trigger voltage is less than 300 Voltage. Note: The PC port is for output using only. f), Awaking function When half-pressing the shutter button of the camera, the hot shoe flash on the receiver will be awakened. (for those flash has wake up function) g), Zoom Function Zoom Automatic: length will be charnged depanding on the changes of lens. Zoom Manual: Zoom length is within 24 - 105mm Zoom Lock h), Support Single-contact of camera and flash triggering (the max. Sync. speed is 1/250s) You can use it with Nikon camera or Nikon flash, but you just need to set up YN-622C in manual mode. i), Flash Fire Ratio with ETTL You can set up different flash fire ratio and FEC for those flashs on hot shoe of receiver. j), Support 2pcs AA batteries, (1.2v rechargeable battery), Stand-by time is 60hours. k), Dimension: 89.5 * 53 * 39MM, net weight is 78g. Note: There is a PC Sync port for YN-622C transceiver, you can use RF-602 PC / PC Cable to connect it with flash. Suit for: Camera: A: The EOS DSLR camera with external flash control menu: Canon 5D Mark II, 5D Mark III, 1Ds Mark III, 1D Mark IV, 1D Mark III, 7D 60D 50D 40D 450D 500D 550D 600D 650D 1000D 1100D B: The EOS DSLR Camera without external flash control menu: Canon 5D 10D 20D 30D 300D 350D 1D 1D Mark II If you use the Canon Speedlite 430EX or 580EX (not mark II) or an older camera without the Flash Control menu then you will have to make settings by hand. Older cameras that don’t have the same Flash Control menu include the original 5D, 10D, 20D, 30D, 300D, 350D, 1D and 1D Mark II. Flash: Compatible ETTL Flash: (It suport wireless remote control through camera menu) Canon 600EX (RT), 580EX II, 430EX II, 320EX, 270EX II Yongnuo YN-565EX C, YN-468 II C, YN-467 II C, YN-465 C (Our yongnuo flash units don't support HSS Function) Note: 430EX and 580EX or other parts of flash is not supported remote control via the camera menu, you need to manually set the flash parameters. Q&A How does wireless E-TTL ratio control work? Set the desired group – A, B or C – on each of your YN-622C transceivers On your Canon EOS DSLR, hit [Menu] > Flash control > External flash func. setting > Wireless func. > Enable. If you have a flash on top of your on-camera YN-622C unit, select Master flash > Enable if you want it to fire, otherwise it won’t. It will behave like an off-camera flash in group A. In the External flash func. setting > Channel menu, pick your channel (1-4). The YN-622C transceivers can actually be set to more channels than the menu supports. To pick channels 5, 6 or 7, select it directly using the buttons on the on-camera YN-622C transceiver. Pick your ratio control mode from the External flash func. setting > Firing group menu. You have the choice of All (A+B+C), A:B or A:B C. In “All”, there are no ratios and each flash fires at the same power level (this is the same as having ‘Wireless func.’ disabled). In the other modes you can select ratios from 8:1 to 1:8 for the groups in 1/2-stop increments. Check your camera user manual for more details. Wireless ratio control in the Flash control menu with the YN-622C How does wireless manual control work? The set-up is similar to E-TTL ratios, but in External flash func. setting > Flash mode you pick “Manual” instead of “E-TTL II”. You will then be able to set each of your independent flash groups – A, B or C – to manual power levels from 1/1 to 1/128. Wireless manual control in the Flash control menu with the YN-622C Package including: -1 x YN-622C transceivers. (DON'T come with retail packing,Since Yongnuo not launch 1PC retail box.We will send in sealed bubble bag.) Note: Camera & Flash & Batteries not included

Triopo TR-586EX Wireless Flash Mode TTL Flash Speedlight Speedlight For Canon Product description Introduction: The TR-586EX can Automatically zoom, wireless TTL, Wireless flash, Optical sensing, compatible with Canon wireless flash signals, / stroboscopic shoot/fast back after only 2.9 seconds/custom function/curtain sync   Features: TTL Flash Manual Flash Multi Flash Wireless slave unit function: Compatibility with the Canon wireless flash system. S1 S2 Light flashing mode Flash control by Camera (Only for the newest Canon Version) Rear-curtain Sync Voice prompt Custom function Power save mode Overheating protection Automatic save function Large size LCD display Manual, Auto zoom function Quick response: Full output recycle time only 2.9 seconds   Specification:  Circuit design: Insulated Gate Bipolar Transistor(IGBT)  Flash index:56(ISO100,180mm)  Flash coverage:18-180mm  Flash Mode: TTL,M,FEB,Slave,S1,S2,Multi  The wireless trigger: Wireless induction flash lighting  The wireless cited flash distance: Indoor 20-30meters,outdoor 10-15meters  Up and down whirl angel degree: 7-90 degree  Left and right whirl angel degree: 0-180 degree  Colour temperature:5500K  Flash time:1/200 seconds---1/20000 seconds  Recycle time:2.9 seconds  Lighting time:100---1500 times  Net Weight:375g   Compatible: Canon EOS 5D Mark II, III, IV,  1Ds Mark [IV / III / II / I], 1D Mark [III / II N/ II / I] 6D (Mark I, II, 5D, 7D (Mark I, II), 80D, 70D, 60D, 50D, 40D, 30D,760D, 750D, 77D, 700D, 650D, 600D, 550D, 500D, 450D, 400D, 350D, 300D, 1300D, 1200D, 1100D, 1000D, 100D etc. I ONLY POST TO ADDRESSES IN SOUTH AFRICA - NO INTERNATIONAL SALES  

Features: Supports C's optical transportation wireless master flash: In the optical transportation wireless flash shooting, the YN568EX III can be used as a master unit to trigger YONGNUO and C's EX series speedlite(except the YN585EX), and supports 4 channels, realize wireless TTL, manual flash and stroboscopic flash. Compatible with C and N's optical transportation wireless slave flash: One YN568EX III can respectively accept the master unit of YN600EX-RT II, YN568EX II, YN568EX III, 600EX(II)-RT, 580EX II, SB-910/900/800/700, Nikon internal flash and for Canon commander and wireless signal of 7D/60D/600D, realizes external TTL, manual flash and stroboscopic flash. GN58@ISO100, 105mm, and supports automatic & manual zooming(24-105mm): High index TTL flash, supports TTL, M, Multi flash; and supports supports automatic & manual zooming, the focal length can be varied between 24-105mm. Supports high speed sync(HSS) flash and with high speed recycling(2s) system: The YN568EX III can synchronize with all shutter speeds, realize TTL and manual flash, 1/8000s maximum shutter sync; and the recycling time for full output just takes 2 seconds. Multiple trigger modes, automatic settings saving and custom setting supported: YN568EX III can be triggered by the camera set-top, PC synchronization trigger and wireless optical trigger off the camera. Supports firmware upgrade: The YN568EX III is equipped with USB interface, you can download the latest firmware from YONGNUO official website to upgrade the speedlite. Equipped with large-size LCD display and 2.5mm PC interface, and supports the battery remaining power real-time display, convenient to use. Specifications: Circuit design: Insulated Gate Bipolar Transistor (IGBT) Guide No.: 58 (ISO 100, 105mm) Flash mode: TTL, M, Multi Trigger mode: On-camera, Sc, Sn, S1, S2 Zoom range: 24, 28, 35, 50, 70, 80, 105mm Vertical rotation angle: -7~90 degrees Horizontal rotation angle: 0~270 degrees Power supply: 4 x AA batteries(not included; Alkaline or NI-MH are usable) Lighting times: 100~1500 times (with AA alkaline battery) Recycle time: Approx. 2s (with new AA alkaline battery) Color temperature: 5600k Flash time: 1/200s~1/20000s Flash control: 8 levels of output control (1/128~1/1), 29 levels of fine tuning in total External interface: hot shoe, PC port, USB port Wireless triggering distance: 20~25m indoors, 10~15m outdoors Additional features: Master flash, High speed sync, Rear-curtain sync, FEC, FEB, FE lock, electric zoom of flash head, sound prompt, auto-save setting, PC sync, USB port, power saving mode, overheating protection, advanced options setting. Item Size: 6.2 x 7.2 x 18.8cm/ 2.4 x 2.8 x 7.4in(Extended state) Item weight: 383g/ 13.5oz Package size: 21.5 x 9.5 x 8cm / 8.5 x 3.7 x 3.1in Package weight: 565g / 1.2lbs Compatible with: Hot shoe TTL mode: For Nikon D7400 D7300 D7200 D7100 D5600 D5500 D5400 D5300 D5200 D5100 D5000 D3500 D3400 D3300 D3200 D3100 D3000 D700 D800E D800 D810 D610 D750 D300s D200 D100 D80 D90 D40 D40x D60 D4 D3. Wirelss TTL Slave mode: For Nikon Commander SU-800 For Nikon SB-910, SB-900, SB-800, SB-700, Commander SU-800 Camera with CLS i-TTL system: D4, D3x, D3s, D3, D2x, D700, D300s, D300, D200, D7000, D90, D80 For Canon 7D 6D 600D 650D For Canon Flash 580EX II For Canon ST-E2 Commander Package Included: 1 x YN568EX III Speedlite 1 x Mini Stand 1 x Protecting Bag 1 x User Manual(English & Chinese)

Neewer Multi-Channel 2.4GHz 3-IN-1 Wireless Flash Studio Flash Trigger for Nikon         Neewer FC-16 Multi-Channel 2.4GHz 3-IN-1 Wireless Flash/Studio Flash Trigger with Remote Shutter for Nikon D7100 D7000 D5100 D5000 D3200 D3100 D600 D90 D800E D800 D700 D300S D300 D200 D4 D3S D3X D2Xs   - Neewer Wireless Flash Trigger for Nikon - The Neewer Photo wireless flash trigger receiver and transmitter can serve you in a multitude of functions. - To use this set as a wireless remote control, plug in the included N-Cable to both the receiver and your camera's compatible input. Make sure the receiver's and the transmitter's switches are set to "CAMERA" mode and then use the transmitter to wirelessly autofocus and take pictures. - Similarly you can employ a wired remote method simply by plugging in the N-Cable to the transmitter alone and proceeding to use this without the receiver. - Finally, if you wish to use this pack for wireless flash / studio flashtriggering purposes, first attach the transmitter to your camera's hot shoe mount. Attach your flash to the hot shoe mount of the receiver and make sure the switches are set to "FLASH" mode and you can proceed to position the flash however you desire and take photos normally. - Features: - Frequency: 2.4Ghz - Operating Distance: up to 100m. - 16 Selectable Channels. - 1/4" Tripod Mount. - Sync Speed: 1/250 second. - Power Supply: 2x alkaline AAA batteries Wireless Frequency System: 2.4GHz Operating Distance: up to 100meters 16 Selectable Channels Also Compatible with: Fuji S5 Pro, S3 Pro Includes: Wireless Camera Flash Trigger and Camera Remote Control Function (1 Transmitter, 1 Receiver) + N1 camera cable + N3 camera cable + Flash Sync Cable + PC Sync Cord + Sync Adapter 1X Transmitter 1X Receiver 1X N1 camera cable 1X N3 camera cable 1X Flash Sync Cable 1X PC Sync Cord 1X Sync Adapter 1X Manual Instruction 

The Triopo Flash has more features than some Original Nikon & Canon Flashes Description: New Arrival Flash Speedlite, it's designed for Nikon DSLR Camera. Wireless slave unit function: compatibility with the Nikon wireless flash system, realize TTL from machine, manual and frequency flash. Wireless trigger sensors: Remote sensing CELL 2 mode for off-camera TTL flash sync. Increase the external power outlet: TR series adds an external power outlet, call back the higher rate to meet your needs. Quick call back: full output only 2.9 seconds recycle time, do not apply the new battery can also call back to obtain a rapid rate, only 4-5 seconds. Support high-speed continuous shooting:1/16 and below the brightness, TR series to support high-speed continuous shooting 12EPS. Power-saving mode: When the flash without any action on the backlight turned off after 20 seconds, 60 seconds when the flash does not work, CPU automatically goes to sleep does not work ore than 30 minutes, CPU will automatically shut down. High-precision output: from 1/128 to 1/1, 8 stalls to lose, each stall has two fine-tuning compensation. Overheat protection: built-temperature detection (thermal protection) Support second-curtain sync: use a slow shutter for making smear subject, the flash will be off the moment the shutter flash spill, this is the rear-curtain sync function. With soft box, mini stand and protective bag. Specifications: Guide number: 56 meters (ISO 100, 180mm) Circuit design: Insulated Gate Bipolar Transistor (IGBT) Flash mode: TTL / M / FEB / Slave (S1/S2) / Multi Wireless trigger:Wireless induction triggering Wireless trigger cited flash distance: Indoor 20-30 meters, outdoor 10-15 meters Slave group and unit: 4 slave channels(1,2,3,4); 3 slave unit group(A, B, C) Zoom range: 18mm, 24mm, 28mm, 35mm, 50mm, 70mm, 85mm, 105mm, 135mm, 180mm Vertical rotation angle: -7 to 90 degrees Horizontal rotation angle: 0 to 180 degrees Power: 4 * AA Batteries(not included) Flash control: 22 grade high-speed control(1/128-1/1) Recycle time: approximately 3s (AA alkaline cell used) Lighting time:100-1500 times (using AA alkaline cell) Color temperature: 5500K Flash time: 1/200s~1/20000s Additional function: PC synchronous, sniff mode, over-temperature protection.

Descriptions: Completely Compatible with YONGNUO YN622C and RF-603 Wireless System: YN685 supports respectively receiving wireless triggering signal from YN622C, YN622C-TX, YN560IV, YN560-TX, RF605, RF603II and RF603. Remote Control Off-camera Parameters of Each Group: The flash mode, flash intensity, focal length and sync mode (YN622C wireless system only) of the speed-lite in each group can be controlled remotely through YN622C transceiver and YN560IV/YN560-TX. GN60@ISO100,200mm: YN685 is a 2.4G wireless speed-lite of high guide number, which supports TTL, M and Multi mode. High Speed Sync (HSS): When HSS function is activated, this speed-lite YN685 can be used with every shutter speed and the maximum sync speed is up to 1/8000s. Note: The camera and transceiver should support HSS function. Ultra fast Charging Recycle System, supporting External Power Supply: The recycling time is 3 seconds when the power output is set to maximum. The recycling time is about 4~5 seconds even this speed-lite is used without using fresh batteries. In addition, you can use the external power supply to meet your higher charging recycle need. Supports Auto/Manual Zooming: YN685 supports auto and manual zooming, and the flash coverage can be changed between 20~200mm. Supports Sound Prompt Function, Custom Settings (Fn.) and Auto Save Settings. Equipped with Big Size LCD Display Screen, standard PC Synchronous Interface. Specifications: Wireless Slave Mode: YN622C Wireless System (there are total 7 channels and 3 groups) Remote Control mode: the remote control mode of YN685 is compatible with the master unit is YN622C-TX, the master unit is YN-622C, and the YN-622C has been enabled the remote control mode. Mix mode: the remote control mode of YN685 is compatible with the master unit is YN-622C, and the YN-622C has been enabled the mix mode RF-603 Wireless System (there are total 16 channels and 6 groups) t can receive the wireless trigger signal from YN-560 IV, YN560-TX, RF-605, RF-603 II Multi-flash Wireless Flash Configuration Wireless flash of two slave units made up by YN685 Wireless flash of multiple slave units made up by YN685 Compatible with: Hot shoe TTL mode:For Canon 1Dx, 1Ds series, 1D series, 5DIII, 5DII, 5D, 7D, 7DII 70D, 60D, 50D, 40D, 30D, 20D, 700D, 750D 650D/T4i, 600D/T3i, 550D/T2i, 500D/T1i, 450D/Xsi, 400D/Xti, 350D,100D, 1100D, 1000D, 1200D Wirelss TTL Slave mode:For Canon 5DIII 7D 70D 60D 700D 650D 600D, Yongnuo ST-E2, for Canon 580EX II Wireless Manual (RF-603 mode) System Yongnuo YN-560IV, YN560-TX, RF-605, RF-603 II ALL DSLR Standard Hot shoe Camera Package Included: 1 x Yongnuo YN685 Flash speedlite 1 x Protecting bag 1 x Mini Stand 1 x Manual in English and Chinese 1 x Original Retail Box

Triopo TR-586EX Wireless Flash Mode TTL Speedlite For Nikon D750 D800 D3200 D7100 DSLR Camera Features: New Arrival Flash Speedlite, it's designed for Nikon DSLR Camera. Wireless slave unit function: compatibility with the Nikon wireless flash system, realize TTL from machine, manual and frequency flash. Wireless trigger sensors: Remote sensing CELL 2 mode for off-camera TTL flash sync. Increase the external power outlet: TR series adds an external power outlet, call back the higher rate to meet your needs. Quick call back: full output only 2.9 seconds recycle time, do not apply the new battery can also call back to obtain a rapid rate, only 4-5 seconds. Support high-speed continuous shooting: 1/16 and below the brightness, TR series to support high-speed continuous shooting 12EPS. Power-saving mode: When the flash without any action on the backlight turned off after 20 seconds, 60 seconds when the flash does not work, CPU automatically goes to sleep does not work more than 30 minutes, CPU will automatically shut down. High-precision output: from 1/128 to 1/1, 8 stalls to lose, each stall has two fine-tuning compensation. Overheat protection: built-temperature detection (thermal protection) Support second-curtain sync: use a slow shutter for making smear subject, the flash will be off the moment the shutter flash spill, this is the rear-curtain sync function. With soft box, mini stand and protective bag. Specification: Guide Number 56 meters (ISO 100, 180mm) Circuit Design Insulated Gate Bipolar Transistor (IGBT) Flash Mode TTL / M / FEB / Slave (S1/S2) / Multi Wireless Trigger Wireless induction triggering Wireless Trigger Cited Flash Distance Indoor 20-30 meters outdoor 10-15 meters Slave Group and Unit 4 slave channels(1,2,3,4); 3 slave unit group(A, B, C) Zoom Range 18mm, 24mm, 28mm, 35mm, 50mm, 70mm, 85mm, 105mm, 135mm, 180mm Vertical Rotation Angle Horizontal Rotation Angle 0 to 180 degrees Power

RF-603 SPEEDLIGHT FLASH TRIGGERS FOR CANON The RF-603 Wireless Flash Trigger act as a wireless flash trigger as well as wireless shutter release trigger. RF-603 supports all Canon DSLR Camera and support Flash Speedlight with "Sleep mode" function: Nikon Canon Olympus Pentax Samsung and other Speedlight flashes which has "Wake up" function The RF603 has been improved in several functions: Transceiver-based system: units automatically detect when to switch to either transmitter or receiver mode. Hot shoe pass-through, allowing on-camera flash and radio triggering to be used simultaneously. Improved shutter sync speed up to s Use AAA batteries (not included) Improved on/off switch Prontor/Compur (PC) port for off-hot shoe synchronisation Non-proprietary 2.5mm (sub-miniphone) port for shutter release cables Shutter release cable included (Select between C1- and C3 cable) Since it is now a transceiver system you can now use it more flexible. With e.g. 4 RF-603 you can trigger 3 flashes (1 trigger, 3 receivers) as well as trigger the camera itself and then trigger 1 flash. One more good thing is that the only power source you now need is 2 AAA batteries. The power switch has been improved an now should prevent from accidently firing in the camera bag which could consume a lot of the battery power. Features:   Wireless flash trigger: As a flash trigger, RF-603 trigger both flash Speedlight and studio flashes the flash sync speed is up to s Transmission distance: 100m Wireless shutter release (C1 shutter connecting cord included to supports Canon 60D 70D 350D 450D 500D 550D 600D 650D 700D D D D): (C3 shutter connecting cord included to supports Canon 1D 5D 6D 7D 20D 30D 40D 50D) As the wireless shutter release, its working range is up to 100 meters (clear outdoor environment) Full-way press the release button can starts continuous shooting or long exposure   Features and specifications: 2.4GHz band-16 selectable operating frequencies to eliminate chance of interference The RF-603 transceiver system can be used to trigger all studio flash units through standard PC socket Flash sync speed: s Operating distance: 100m Shutter interface: 2.5mm socket Release: half-way press, full-way press Battery: AAA x 2 Receiver stand-by time: up to 45 hours Package include: 2 x RF-603 Transceivers for Canon cameras 1x cable for shutter release function (C1 shutter connecting cord included to supports Canon 60D 70D 350D 450D 500D 550D 600D 650D 700D D D D): (C3 shutter connecting cord included to supports Canon 1D 5D 6D 7D 20D 30D 40D 50D) English Manual   PLEASE REMEMBER TO INDICATE WHICH ONE OF THE CABLES YOU REQUIRE (IF YOU WANT BOTH THE C1 AND C3 CABLES - PLEASE ADD R50 FOR THE SECOND CABLE) I ONLY POST TO ADDRESSES IN SOUTH AFRICA - NO INTERNATIONAL SALES

SINGLE RF-603 SPEEDLIGHT FLASH TRIGGER FOR CANON The RF-603 Wireless Flash Trigger act as a wireless flash trigger as well as wireless shutter release trigger. RF-603 supports all Canon DSLR Camera and support Flash Speedlight with "Sleep mode" function: Nikon Canon Olympus Pentax Samsung and other Speedlight flashes which has "Wake up" function The RF603 has been improved in several functions: Transceiver-based system: units automatically detect when to switch to either transmitter or receiver mode. Hot shoe pass-through, allowing on-camera flash and radio triggering to be used simultaneously. Improved shutter sync speed up to s Use AAA batteries (not included) Improved on/off switch Prontor/Compur (PC) port for off-hot shoe synchronisation Non-proprietary 2.5mm (sub-miniphone) port for shutter release cables Shutter release cable included (Select between C1- and C3 cable) Since it is now a transceiver system you can now use it more flexible. With e.g. 4 RF-603 you can trigger 3 flashes (1 trigger, 3 receivers) as well as trigger the camera itself and then trigger 1 flash. One more good thing is that the only power source you now need is 2 AAA batteries. The power switch has been improved an now should prevent from accidently firing in the camera bag which could consume a lot of the battery power. Features:   Wireless flash trigger: As a flash trigger, RF-603 trigger both flash Speedlight and studio flashes the flash sync speed is up to s Transmission distance: 100m Wireless shutter release (CABLES NOT INCLUDED - AVAILABLE FOR R50 EXTRA) (C1 shutter connecting cord included to supports Canon 60D 70D 350D 450D 500D 550D 600D 650D 700D D D D): (C3 shutter connecting cord included to supports Canon 1D 5D 6D 7D 20D 30D 40D 50D) As the wireless shutter release, its working range is up to 100 meters (clear outdoor environment) Full-way press the release button can starts continuous shooting or long exposure   Features and specifications: 2.4GHz band-16 selectable operating frequencies to eliminate chance of interference The RF-603 transceiver system can be used to trigger all studio flash units through standard PC socket Flash sync speed: s Operating distance: 100m Shutter interface: 2.5mm socket Release: half-way press, full-way press Battery: AAA x 2 Receiver stand-by time: up to 45 hours Package include: 1x RF-603 Transceiver for Canon cameras I ONLY POST TO ADDRESSES IN SOUTH AFRICA - NO INTERNATIONAL SALES

Features:   Yongnuo YN568EX TTL flash is an upgraded version of YN565EX now supporting High-Speed synchronization of up to 1/8000s. Great choice for professionals and advanced amateur Nikon users. Yongnuo YN568EX is top of the line external flash for Nikon DSLR cameras. It is a great alternative to much more expensive Nikon SB900, SB910 or SB700 speedlites, offering the same functions and same or even more power at much lower price. High guide number (58m), TTL and HSS (high speed synchronization) make this an excellent tool for digital photography. Yongnuo YN568EX supports high speed sync flash – YN568EX is the first speedlite which supports high-speed flash synchronization; with high-speed sync (FP flash), the YN568EX can synchronize at all shutter speeds. The maximum shutter sync is up to 1/8000 Compatible with Nikon and Canon wireless flash system – One YN568EX is able to respectively accept internal flashing of YN568EX II, 580EX II, SB-910/900/800/700, 7D/70D/60D/600D/650D/700D, Canon commander of Nikon’s built-in flashing and ST-E2 wireless signal, achieving off camera TTL and manual flashing. Some functions such as wireless TTL flashing, grouping light ratio TTL flashing and the illumination of remote controlled flashing can be easily achieved if you carry a camera with built-in flash commander system and YN568EX only. High Guide Number TTL + High Speed Sync – GN58@ ISO100, 105mm; which reaches the level of the mainstream hot shoe flashes, supports HSS, TTL/M/Multi mode. Multiple triggering mode supported – The YN568EX can be triggered by the camera set-top, built-in or main-controlled flashing command, S1 and S2 (pre-flash-canceled mode). Supports auto/manual zooming – The covered focal length can be changed between auto, 24 - 105mm on the lamp adapter by operating the zoom button on the flash light, supporting full-frame/APS-C cameras. Comprehensively supports TTL functions – The YN568EX supports HSS, FEC, FEB, Rear-curtain sync (2nd curtain sync), FE lock, Modeling Light Extreme speed of charging recycle – The time for full power output current-return just takes 3 seconds; you can get fast current-return experience even without brand-new batteries, which just takes 4~5 seconds Equipped with 2.5mm PC Synchronisation interface – It makes things easier on lightening the flashlight synchronously by using PC synchronisation port. Sound prompting system – When the sound prompting system is enabled, the different sound alerts will prompt different working conditions of the flashlight so as to allow you to focus on shooting. Aperture preview – Press the camera’s aperture preview button, the YN568EX will send out continuous flash lasting one second for subjects imaging. Advanced options function – The YN568EX has advanced options settings function, where you can self-define the functions of the flashlight to suit your own requirements. Automatic saving settings – YN568EX can automatically save your current operating settings to convenient your next use. LCD display interface, modern appearance. C ompatible with:   For Nikon D600, D610, D810, D800E, D750, D700, D800, D300, D300S, D7000, D7100, D7200, D3000, D3100, D3200, D3300, D5100, D5000, D5200, D5300, D90, D80 and any other Nikon DSLR Camera   Specification s: Circuit design: Insulated Gate Bipolar Transistor (IGBT) Guide No.: 58 meters (ISO 100, 105mm) Flash mode: TTL, Manual, MULTI, Sc, Sn, S1, S2 Wireless triggering distance: 20~25m indoor, 10~15m outdoor Zoom range: 24, 28, 35, 50, 70, 80, 105mm Vertical rotation angle: -7~90 degrees Horizontal rotation angle: 0~270 degrees Power supply: 4 × AA size batteries (Alkaline or Ni-MH are usable) Lighting times: 100~1500 times (AA alkaline cell used) Recycle time: approx 3s (AA alkaline cell used) Color temperature: 5600k Flash duration: 1/200s~1/20000s Flash control: 8 levels of output control (1/128~1/1), 29 levels of fine tuning External interface: hot shoe, PC port Additional features: Rear-curtain sync, FEC, FEB, FEV, modeling flash, manual zoom, auto zoom, sound prompt, advanced setting, automatically saving setting, PC port, power saving mode and over heat protection Dimensions: 60 × 190 × 73mm (Extended state) Net weight: 380g Note: The battery is not included.   Package Include d:   1 x Yongnuo YN-568EX Flash Speedlite for Nikon 1 x Mini Stand 1 x Manual in English and Chinese 1 x Original Box 1 x Soft Case for Flash

Supported flash mode: i-TTL, manual flash. Support modeling flash and red-eye reduction flash. Built-in AF assist beam emitter(AF lamp). Support exposure compensation, flash value lock function(FVL). Settings saved automatically. Yongnuo YN-622N-TX TTL Wireless Flash Controller + 2PC YN-622N Trigger for Nikon Wireless Flash Controller: Specifications: System type: Digital FSK 2.4GHz wireless controller Distance: 100m Channel: 7 Flash mode: i-TTL, manual flash Sync mode: front-curtain sync, rear-curtain sync, hi-speed sync(auto FP) Groups: 3 groups(A/B/C) Sync speed: 1/8000s Input: Hotshoe Output: Hotshoe, PC port Shutter release interface: 2.5mm shutter release interface USB firmware upgraded: Support AF assist beam emitter: Support Applicable battery: 2 * AA battery(Support 1.2V rechargeable battery)(Batteries not included) Standby time: 120 hours 1 * N1 Shutter Cable 1 * N3 Shutter Cable 1 * User ManualEnglish & Chinese) Transceiver: Compatible with Yongnuo / Nikon series flashes. Support PC port triggering strobe flashes. PC port support front/rear curtain sync and high speed sync(super sync) function. Support single-contact of camera & flash triggering. (max sync speed is 1/250s) On compatible cameras/flash with TTL function. Compatible camera list: For Nikon D70/D70S/D80/D90/D200/D300/D300S/600/D700/D800/D3000 series/D5000 series/D7000 series Compatible i-TTL flash list: For YN465N/YN467N/YN-468N(II)/YN565N/YN568N For Nikon SB-400/SB-600/SB-700/SB-800/SB-900/SB-910 Specifications: System type: Digital FSK 2.4GHz wireless transceiver Distance: 100m Channel: 7 Flash mode: i-TTL, manual flash Sync mode: front-curtain sync, rear-curtain syce, hi-speed sync(auto FP) Groups: 3 groups(A/B/C) Sync speed: 1/8000s Input: Hotshoe Output: Hotshoe, PC port Applicable battery: 2 * AA battery(Support 1.2V rechargeable battery)(Batteries not included) Standby time: 60 hours