Tork craft mandrel diamond

Mandrel for hole saws Mandrel shank: 3/8' hex Drill bit diameter: Ø6.35mm Hole saws: Diamond coated Ø14-30mm Application: Use the mandrel with Diamond coated hole saws that are able to cut into bricks, roof tiles, slate, ceramics, tiles, marble/granite, reinforced plastics, glass resins, asbestos. The mandrel range: 14-30mm no pins: TC17002 - Mandrel for Bi-metal hole saws. TC17002-2 - Mandrel for Carbide grit hole saws. TC17002-3 - Mandrel for Diamond coated hole saws. TC17002-4 - Mandrel for TCT hole saws. 32-152mm with pins: TC17007 - Mandrel for Bi-metal hole saws. TC17007-2 - Mandrel for Carbide grit hole saws. TC17007-3 - Mandrel for Diamond coated hole saws. TC17007-4 - Mandrel for Tungsten Carbide Tipped (TCT) hole saws. Mandrel replacement pilot drill bits: Ø6.35 x 115mm (extra long) for bi-metal hole saws - TC00001 Ø6.35 x 70mm for bi-metal hole saws - TC00002 Tungsten Carbide Tipped (TCT) series hole saws - TC00003 Carbide grit hole saws - TC00004 Diamond coated hole saws - TC00006

Mandrel for hole saws Mandrel shank: 7/16' hex Drill bit diameter: Ø6.35mm Hole saws: Diamond coated Ø32-152mm Application: Use the mandrel with Diamond coated hole saws that are able to cut into bricks, roof tiles, slate, ceramics, tiles, marble/granite, reinforced plastics, glass resins, asbestos. The mandrel range: 14-30mm no pins: TC17002 - Mandrel for Bi-metal hole saws. TC17002-2 - Mandrel for Carbide grit hole saws. TC17002-3 - Mandrel for Diamond coated hole saws. TC17002-4 - Mandrel for TCT hole saws. 32-152mm with pins: TC17007 - Mandrel for Bi-metal hole saws. TC17007-2 - Mandrel for Carbide grit hole saws. TC17007-3 - Mandrel for Diamond coated hole saws. TC17007-4 - Mandrel for Tungsten Carbide Tipped (TCT) hole saws. Mandrel replacement pilot drill bits: Ø6.35 x 115mm (extra long) for bi-metal hole saws - TC00001 Ø6.35 x 70mm for bi-metal hole saws - TC00002 Tungsten Carbide Tipped (TCT) series hole saws - TC00003 Carbide grit hole saws - TC00004 Diamond coated hole saws - TC00006

Buy Tork Craft 100mm Diamond Polishing Pad 2000 Grit Pink for R148.50

Buy Tork Craft 100mm Diamond Polishing Pad 3000 Grit Light Green for R148.50

Buy Tork Craft 100Mm Diamond Polishing Pad 100 Grit Dry Use for R171.00

Buy Tork Craft 100Mm Diamond Wet Polishing Pad 2000 Grit Lime Green for R96.00

Buy Tork Craft Mini Diamond Point 4.4mm Ball 2.4mm Shank for R11.00

Buy Tork Craft 100Mm Diamond Polishing Pad 100 Grit Dry Use for R198.00

Mandrel for hole saws Mandrel shank: 3/8" hex Drill bit diameter: Ø6.35mm Hole saws: Bi-metal Ø14-30mm Application: Use the mandrel on Bi-Metal hole saws that are able to cut into metal, wood and plastics. The mandrel range: 14-30mm no pins: TC17002 - Mandrel for Bi-metal hole saws. TC17002-2 - Mandrel for Carbide grit hole saws. TC17002-3 - Mandrel for Diamond coated hole saws. TC17002-4 - Mandrel for Tungsten Carbide Tipped (TCT) hole saws. 32-152mm with pins: TC17007 - Mandrel for Bi-metal hole saws. TC17007-2 - Mandrel for Carbide grit hole saws. TC17007-3 - Mandrel for Diamond coated hole saws. TC17007-4 - Mandrel for Tungsten Carbide Tipped (TCT) hole saws. Mandrel replacement pilot drill bits: Ø6.35 x 115mm (extra long) for bi-metal hole saws - TC00001 Ø6.35 x 70mm for bi-metal hole saws - TC00002 Tungsten Carbide Tipped (TCT) series hole saws - TC00003 Carbide grit hole saws - TC00004 Diamond coated hole saws - TC00006

Mandrel for hole saws Mandrel shank: 3/8" hex Drill bit diameter: Ø6.35mm Hole saws: Carbide grit Ø14-30mm Application: Use the mandrel on Carbide grit hole saws that are able to cut into stone, masonry, concrete paving, fibre reinforced plastic, wood and cement board. The mandrel range: 14-30mm no pins: TC17002 - Mandrel for Bi-metal hole saws. TC17002-2 - Mandrel for Carbide grit hole saws. TC17002-3 - Mandrel for Diamond coated hole saws. TC17002-4 - Mandrel for TCT hole saws. 32-152mm with pins: TC17007 - Mandrel for Bi-metal hole saws. TC17007-2 - Mandrel for Carbide grit hole saws. TC17007-3 - Mandrel for Diamond coated hole saws. TC17007-4 - Mandrel for Tungsten Carbide Tipped (TCT) hole saws. Mandrel replacement pilot drill bits: Ø6.35 x 115mm (extra long) for bi-metal hole saws - TC00001 Ø6.35 x 70mm for bi-metal hole saws - TC00002 Tungsten Carbide Tipped (TCT) series hole saws - TC00003 Carbide grit hole saws - TC00004 Diamond coated hole saws - TC00006

Mandrel for hole saws Mandrel shank: 7/16" hex Drill bit diameter: Ø6.35mm Hole saws: Carbide grit Ø32-152mm Application: Use the mandrel with Carbide grit hole saws that are able to cut into stone, masonry, concrete paving, fibre reinforced plastic, wood and cement board. The mandrel range: 14-30mm no pins: TC17002 - Mandrel for Bi-metal hole saws. TC17002-2 - Mandrel for Carbide grit hole saws. TC17002-3 - Mandrel for Diamond coated hole saws. TC17002-4 - Mandrel for TCT hole saws. 32-152mm with pins: TC17007 - Mandrel for Bi-metal hole saws. TC17007-2 - Mandrel for Carbide grit hole saws. TC17007-3 - Mandrel for Diamond coated hole saws. TC17007-4 - Mandrel for Tungsten Carbide Tipped (TCT) hole saws. Mandrel replacement pilot drill bits: Ø6.35 x 115mm (extra long) for bi-metal hole saws - TC00001 Ø6.35 x 70mm for bi-metal hole saws - TC00002 Tungsten Carbide Tipped (TCT) series hole saws - TC00003 Carbide grit hole saws - TC00004 Diamond coated hole saws - TC00006

Mandrel for hole saws Mandrel shank: 7/16" hex Drill bit diameter: Ø6.35mm Hole saws: TCT Ø32-152mm Application: Use the mandrel with Tungsten Carbide Tipped (TCT) hole saws. The mandrel range: 14-30mm no pins: TC17002 - Mandrel for Bi-metal hole saws. TC17002-2 - Mandrel for Carbide grit hole saws. TC17002-3 - Mandrel for Diamond coated hole saws. TC17002-4 - Mandrel for TCT hole saws. 32-152mm with pins: TC17007 - Mandrel for Bi-metal hole saws. TC17007-2 - Mandrel for Carbide grit hole saws. TC17007-3 - Mandrel for Diamond coated hole saws. TC17007-4 - Mandrel for Tungsten Carbide Tipped (TCT) hole saws. Mandrel replacement pilot drill bits: Ø6.35 x 115mm (extra long) for bi-metal hole saws - TC00001 Ø6.35 x 70mm for bi-metal hole saws - TC00002 Tungsten Carbide Tipped (TCT) series hole saws - TC00003 Carbide grit hole saws - TC00004 Diamond coated hole saws - TC00006

Mandrel for hole saws Mandrel shank: 7/16' hex Drill bit diameter: Ø6.35mm Hole saws: Bi-metal Ø32-152mm Application: Use the mandrel with Bi-metal hole saws that are able to cut into metal, wood and plastics. The mandrel range: 14-30mm no pins: TC17002 - Mandrel for Bi-metal hole saws. TC17002-2 - Mandrel for Carbide grit hole saws. TC17002-3 - Mandrel for Diamond coated hole saws. TC17002-4 - Mandrel for TCT hole saws. 32-152mm with pins: TC17007 - Mandrel for Bi-metal hole saws. TC17007-2 - Mandrel for Carbide grit hole saws. TC17007-3 - Mandrel for Diamond coated hole saws. TC17007-4 - Mandrel for Tungsten Carbide Tipped (TCT) hole saws. Mandrel replacement pilot drill bits: Ø6.35 x 115mm (extra long) for bi-metal hole saws - TC00001 Ø6.35 x 70mm for bi-metal hole saws - TC00002 Tungsten Carbide Tipped (TCT) series hole saws - TC00003 Carbide grit hole saws - TC00004 Diamond coated hole saws - TC00006

Mandrel for hole saws Mandrel shank: SDS Plus Drill bit diameter: Ø6.35mm Hole saws: Bi-metal Ø32-152mm Application: The mandrel is specially designed to fit in a SDS Plus rotary hammer drill. The supplied pilot drill bit can only be used with Bi-metal hole saws that are able to cut into metal, wood and plastics. IMPORTANT: The mandrel should not be used with percussion or hammer action. Mandrel replacement pilot drill bits: Ø6.35 x 115mm (extra long) for bi-metal hole saws - TC00001 Ø6.35 x 70mm for bi-metal hole saws - TC00002 Tungsten Carbide Tipped (TCT) series hole saws - TC00003 Carbide grit hole saws - TC00004 Diamond coated hole saws - TC00006

Buy Tork Craft Mini Screw Mandrel Reinforced 3.2mm Shank for R11.00