Tork craft mandrel plus

Chisel - SDS Plus SDS Plus: Flat Chisel - 400 mm x 40 mm Tork Craft SDS Plus chisels have super-hard tips for breaking through concrete, tile and masonry. Designed to fit SDS Plus chucks for secure bit retention. Break concrete, flooring and brickwork High carbon steel construction Suitable for: Tip: When chiselling with a rotary hammer, it will work faster and more efficiently if you do not put pressure on it! Allow the drill to do the work.

Buy Tork Craft SDS Plus Adaptor For 13mm Chuck 1/2 X 20 for R27.50

Buy tork Craft Sds Plus Magnetic Bit Holder 80Mm Quick Change One Touch for R154.00

Mandrel for hole saws Mandrel shank: SDS Plus Drill bit diameter: Ø6.35mm Hole saws: Bi-metal Ø32-152mm Application: The mandrel is specially designed to fit in a SDS Plus rotary hammer drill. The supplied pilot drill bit can only be used with Bi-metal hole saws that are able to cut into metal, wood and plastics. IMPORTANT: The mandrel should not be used with percussion or hammer action. Mandrel replacement pilot drill bits: Ø6.35 x 115mm (extra long) for bi-metal hole saws - TC00001 Ø6.35 x 70mm for bi-metal hole saws - TC00002 Tungsten Carbide Tipped (TCT) series hole saws - TC00003 Carbide grit hole saws - TC00004 Diamond coated hole saws - TC00006

Mandrel for hole saws Mandrel shank: 3/8" hex Drill bit diameter: Ø6.35mm Hole saws: Bi-metal Ø14-30mm Application: Use the mandrel on Bi-Metal hole saws that are able to cut into metal, wood and plastics. The mandrel range: 14-30mm no pins: TC17002 - Mandrel for Bi-metal hole saws. TC17002-2 - Mandrel for Carbide grit hole saws. TC17002-3 - Mandrel for Diamond coated hole saws. TC17002-4 - Mandrel for Tungsten Carbide Tipped (TCT) hole saws. 32-152mm with pins: TC17007 - Mandrel for Bi-metal hole saws. TC17007-2 - Mandrel for Carbide grit hole saws. TC17007-3 - Mandrel for Diamond coated hole saws. TC17007-4 - Mandrel for Tungsten Carbide Tipped (TCT) hole saws. Mandrel replacement pilot drill bits: Ø6.35 x 115mm (extra long) for bi-metal hole saws - TC00001 Ø6.35 x 70mm for bi-metal hole saws - TC00002 Tungsten Carbide Tipped (TCT) series hole saws - TC00003 Carbide grit hole saws - TC00004 Diamond coated hole saws - TC00006

Mandrel for hole saws Mandrel shank: 3/8" hex Drill bit diameter: Ø6.35mm Hole saws: Carbide grit Ø14-30mm Application: Use the mandrel on Carbide grit hole saws that are able to cut into stone, masonry, concrete paving, fibre reinforced plastic, wood and cement board. The mandrel range: 14-30mm no pins: TC17002 - Mandrel for Bi-metal hole saws. TC17002-2 - Mandrel for Carbide grit hole saws. TC17002-3 - Mandrel for Diamond coated hole saws. TC17002-4 - Mandrel for TCT hole saws. 32-152mm with pins: TC17007 - Mandrel for Bi-metal hole saws. TC17007-2 - Mandrel for Carbide grit hole saws. TC17007-3 - Mandrel for Diamond coated hole saws. TC17007-4 - Mandrel for Tungsten Carbide Tipped (TCT) hole saws. Mandrel replacement pilot drill bits: Ø6.35 x 115mm (extra long) for bi-metal hole saws - TC00001 Ø6.35 x 70mm for bi-metal hole saws - TC00002 Tungsten Carbide Tipped (TCT) series hole saws - TC00003 Carbide grit hole saws - TC00004 Diamond coated hole saws - TC00006

Mandrel for hole saws Mandrel shank: 7/16" hex Drill bit diameter: Ø6.35mm Hole saws: Carbide grit Ø32-152mm Application: Use the mandrel with Carbide grit hole saws that are able to cut into stone, masonry, concrete paving, fibre reinforced plastic, wood and cement board. The mandrel range: 14-30mm no pins: TC17002 - Mandrel for Bi-metal hole saws. TC17002-2 - Mandrel for Carbide grit hole saws. TC17002-3 - Mandrel for Diamond coated hole saws. TC17002-4 - Mandrel for TCT hole saws. 32-152mm with pins: TC17007 - Mandrel for Bi-metal hole saws. TC17007-2 - Mandrel for Carbide grit hole saws. TC17007-3 - Mandrel for Diamond coated hole saws. TC17007-4 - Mandrel for Tungsten Carbide Tipped (TCT) hole saws. Mandrel replacement pilot drill bits: Ø6.35 x 115mm (extra long) for bi-metal hole saws - TC00001 Ø6.35 x 70mm for bi-metal hole saws - TC00002 Tungsten Carbide Tipped (TCT) series hole saws - TC00003 Carbide grit hole saws - TC00004 Diamond coated hole saws - TC00006

Mandrel for hole saws Mandrel shank: 7/16" hex Drill bit diameter: Ø6.35mm Hole saws: TCT Ø32-152mm Application: Use the mandrel with Tungsten Carbide Tipped (TCT) hole saws. The mandrel range: 14-30mm no pins: TC17002 - Mandrel for Bi-metal hole saws. TC17002-2 - Mandrel for Carbide grit hole saws. TC17002-3 - Mandrel for Diamond coated hole saws. TC17002-4 - Mandrel for TCT hole saws. 32-152mm with pins: TC17007 - Mandrel for Bi-metal hole saws. TC17007-2 - Mandrel for Carbide grit hole saws. TC17007-3 - Mandrel for Diamond coated hole saws. TC17007-4 - Mandrel for Tungsten Carbide Tipped (TCT) hole saws. Mandrel replacement pilot drill bits: Ø6.35 x 115mm (extra long) for bi-metal hole saws - TC00001 Ø6.35 x 70mm for bi-metal hole saws - TC00002 Tungsten Carbide Tipped (TCT) series hole saws - TC00003 Carbide grit hole saws - TC00004 Diamond coated hole saws - TC00006

Mandrel for hole saws Mandrel shank: 3/8' hex Drill bit diameter: Ø6.35mm Hole saws: Diamond coated Ø14-30mm Application: Use the mandrel with Diamond coated hole saws that are able to cut into bricks, roof tiles, slate, ceramics, tiles, marble/granite, reinforced plastics, glass resins, asbestos. The mandrel range: 14-30mm no pins: TC17002 - Mandrel for Bi-metal hole saws. TC17002-2 - Mandrel for Carbide grit hole saws. TC17002-3 - Mandrel for Diamond coated hole saws. TC17002-4 - Mandrel for TCT hole saws. 32-152mm with pins: TC17007 - Mandrel for Bi-metal hole saws. TC17007-2 - Mandrel for Carbide grit hole saws. TC17007-3 - Mandrel for Diamond coated hole saws. TC17007-4 - Mandrel for Tungsten Carbide Tipped (TCT) hole saws. Mandrel replacement pilot drill bits: Ø6.35 x 115mm (extra long) for bi-metal hole saws - TC00001 Ø6.35 x 70mm for bi-metal hole saws - TC00002 Tungsten Carbide Tipped (TCT) series hole saws - TC00003 Carbide grit hole saws - TC00004 Diamond coated hole saws - TC00006

Mandrel for hole saws Mandrel shank: 7/16' hex Drill bit diameter: Ø6.35mm Hole saws: Bi-metal Ø32-152mm Application: Use the mandrel with Bi-metal hole saws that are able to cut into metal, wood and plastics. The mandrel range: 14-30mm no pins: TC17002 - Mandrel for Bi-metal hole saws. TC17002-2 - Mandrel for Carbide grit hole saws. TC17002-3 - Mandrel for Diamond coated hole saws. TC17002-4 - Mandrel for TCT hole saws. 32-152mm with pins: TC17007 - Mandrel for Bi-metal hole saws. TC17007-2 - Mandrel for Carbide grit hole saws. TC17007-3 - Mandrel for Diamond coated hole saws. TC17007-4 - Mandrel for Tungsten Carbide Tipped (TCT) hole saws. Mandrel replacement pilot drill bits: Ø6.35 x 115mm (extra long) for bi-metal hole saws - TC00001 Ø6.35 x 70mm for bi-metal hole saws - TC00002 Tungsten Carbide Tipped (TCT) series hole saws - TC00003 Carbide grit hole saws - TC00004 Diamond coated hole saws - TC00006

Mandrel for hole saws Mandrel shank: 7/16' hex Drill bit diameter: Ø6.35mm Hole saws: Diamond coated Ø32-152mm Application: Use the mandrel with Diamond coated hole saws that are able to cut into bricks, roof tiles, slate, ceramics, tiles, marble/granite, reinforced plastics, glass resins, asbestos. The mandrel range: 14-30mm no pins: TC17002 - Mandrel for Bi-metal hole saws. TC17002-2 - Mandrel for Carbide grit hole saws. TC17002-3 - Mandrel for Diamond coated hole saws. TC17002-4 - Mandrel for TCT hole saws. 32-152mm with pins: TC17007 - Mandrel for Bi-metal hole saws. TC17007-2 - Mandrel for Carbide grit hole saws. TC17007-3 - Mandrel for Diamond coated hole saws. TC17007-4 - Mandrel for Tungsten Carbide Tipped (TCT) hole saws. Mandrel replacement pilot drill bits: Ø6.35 x 115mm (extra long) for bi-metal hole saws - TC00001 Ø6.35 x 70mm for bi-metal hole saws - TC00002 Tungsten Carbide Tipped (TCT) series hole saws - TC00003 Carbide grit hole saws - TC00004 Diamond coated hole saws - TC00006

SDS Plus drill bit Drill diameter: Ø6.0mm Total length: 210mm Working length: 150mm Application: The SDS Plus drill bit is used to drill holes in masonry, concrete and stone thanks to the uniquely designed TCT (tungsten carbide tipped) point with 2 cutting edges. The helix has been optimised to add strength to the drill bit and to assist with dust removal. The drill bit can be used with any SDS Plus compliant rotary hammers. TIP: Have a wall scanner (detector) ready before drilling into walls.

SDS Plus drill bit Drill diameter: Ø13.0mm Total length: 160mm Working length: 100mm Application: The SDS Plus drill bit is used to drill holes in masonry, concrete and stone thanks to the uniquely designed TCT (tungsten carbide tipped) point with 2 cutting edges. The helix has been optimised to add strength to the drill bit and to assist with dust removal. The drill bit can be used with any SDS Plus compliant rotary hammers. TIP: Have a wall scanner (detector) ready before drilling into walls.

SDS Plus drill bit Drill diameter: Ø14.0mm Total length: 160mm Working length: 100mm Application: The SDS Plus drill bit is used to drill holes in masonry, concrete and stone thanks to the uniquely designed TCT (tungsten carbide tipped) point with 2 cutting edges. The helix has been optimised to add strength to the drill bit and to assist with dust removal. The drill bit can be used with any SDS Plus compliant rotary hammers. TIP: Have a wall scanner (detector) ready before drilling into walls.

SDS Plus drill bit Drill diameter: Ø4.0mm Total length: 110mm Working length: 50mm Application: The SDS Plus drill bit is used to drill holes in masonry, concrete and stone thanks to the uniquely designed TCT (tungsten carbide tipped) point with 2 cutting edges. The helix has been optimised to add strength to the drill bit and to assist with dust removal. The drill bit can be used with any SDS Plus compliant rotary hammers. TIP: Have a wall scanner (detector) ready before drilling into walls.