Segment led

SELECTED OPTION: COLOR: BLUE CLICK HERE for more options in this item. Description: With the big size LED music spectrum design, it can show the excellent effect of the sound waves, simple design and easy connect, it's suitable for the electronic basics enthusiast. it can change the different display modes and the sensitivity adjustment. it can use with the mobile phone, computer, MP3, MP4 and other music player device. Manual: Feature: 1. 5V USB power supply and 3.5mm audio signal input. 2. 8cm x 20cm big size spectrum sound waves display screen. 3. 225 segment LED bring you the amazing music spectrum sound waves beating effect. 4. One touch key control the different display modes and the sensitive,it has five kinds of display modes and 4 levels sensitivity adjustment. 5. With many acrylic to enclose the front and the back. 6. Easy connect the USB and the audio cable that can use in the different player devices. 7. Double audio channel input to collect the sounds wave that makes the effect more accurate. 8. Three-color optional, you can choose White, Blue and the Colorfil(Red-Green-Blue) version. 9. Automatic gain by the different music player devices.  Function: 1. Easy connect three port of the USB cable and the audio signal input, it can shows the effect when you play the music. 2. Short touch the key it can change the sound waves display mode, long touch the key enter the sensitivity adjustment and you can change the sensitive by short touch the key, and then long touch the key again back to the display mode. Package included: 1 x DIY Big Size Touch Control 225 Segment LED Digital Equalizer Music Spectrum Sound Waves Kit

Buy 7 segment led tube 0.56 Inch LED Digital Tube Display for R7.49

Buy 20 Segment LED Music Spectrum Light DIY Electronic Kit Double Row Voice Control for R203.82

Buy (Type red&yellow&green&blue&pink parts)120 Segment LED Music Spectrum Light DIY Electronic Kit D... for R1,589.00

Buy Geekcreit DIY Big Size Touch Control 225 Segment LED Digital Equalizer Music Sp... (COLOR.: WHITE) for R434.00

Specification: Name: Manual Wireless Remote-Control Three-Way Control Switch Material: ABS (Acrylonitrile Butadiene Styrene plastic) Function: 1. Connect the power supply with the A/1 group on. 2. A/1 ON/OFF blue group.B/2 ON/OFF white group, C/3 ON/OFF yellow group will" ON" /" OFF ", press “SLEEP” after 8 seconds will all closes. 3. Manual lighting order A/1 group ON-A/1, B/2 group ON-A/1, B/2, C/3 group all on. Switch: Size: approx.7.5 x 5.4 x 2.5cm Voltage: AC 220V Controlled wire: 3-Way Remote control: Size: approx.9.8 x 4.1 x 1.3cm Power: 12V 23A battery (not included) Remote control distance: 30m Scope of application: home or office lighting place, household appliances Features: - Perfect for remote controlling of droplight, crystal lamp, modern low-pressure lamp, absorb dome light, day flower lamp, fluorescent lamp, energy-saving lamps, exhaust fan, LED light etc. - Fast and easy installation, not obstructed by walls, capable of connecting any loads. Remote controller and switch can be used simultaneously for ease and flexibility. - Every set of remote controlling switch has its special code. More sets can be used in one room without interference. Package included: 1 x Switch 1 x Remote control (battery is not included) 1 x Base

Estimated delivery time: working days (Imported from the UK) - T&C's Apply Please note that all Christmas gift orders need to be placed before the 14th of November to ensure that they are delivered to you in time. This item includes free delivery within South Africa. lUX-lD01 MINI MOVING HEADThis compact and lightweight 13 channel RGB lED DMX moving head scanner creates multiple effects and has a very impressive light output due to the 1 x 14W lED. It is a free standing unit which can be wall or ceiling mounted via the supplied mounting bracket, ideal for use in bars and nightclubs.13 DMX channels, pan, pan fine, tilt, tilt fine, pan/tilt speed, dimmer/strobe, red, green, blue, colours, colour change speed, movement programs, gobos13 or 5 DMX channel operationHigh power 14W RGB lED ( hrs)DMX in/out connections via 3-pin XlRStrobe speed adjustableAuto/sound activated (8 programs)9 gobos & openReset functionRed 7 segment lED displayManual focus adjustmentFan cooledlightweight plastic housingPower supplyVac, HzBeam angle13°DMX channels13Head movement: Pan540°Head movement: Tilt270°Dimensions178 x 173 x 260mmWeight3.8kg

Battery Status Indicator- K1099 Features: Display of 10 segment LED bar graph. Work for both 12V and 24V lead battery. Wide operating voltage and temperature range. Specifically designed to monitor the power level of lead battery while charging or discharging. Range indication: Green: 41~100%, Yellow: 21~40%, Red: 20% and less Specifications: Operating voltage: 12V&24V Operating Temperature: -40℃~85℃ Storage Temperature: -50℃~90℃ Humidity: 95% RH (non-condensing) at 38℃ Terminals: Max. 3; 3/16”-spades Mounting: U-shape bracket Product size: 5.3 * 3.2 * 3.8cm / 2.1 * 1.3 * 1.5in Product weight: 26g / 0.9oz Package size: 6.5 * 5.2 * 4.3cm / 2.6 * 2 * 1.7in Package weight: 36g / 1.3oz Package including: 1 * Battery Indicator 1 * Pack of Accessories

4 Digit 8 Segment Red LED Display Module Specification: Operating voltage: 3.3V - 5V Row needle leads to a common pin, include a VCC pin, and 4-bit driving pin (D1, D2, D3, D4), 8 segments drive pins (A, B, C, D, E, F, G, DP) Size: 33.5 (mm) x 21 (mm) Feature: - 0.36 inches of red common anode 4-segment digital tube - 4 8550 transistor parallel drive - 4-bit drivers current limiting resistor and eight segments driven current limiting resistor Package included: 1x Digital Tube Display Module

Buy 10 Segment Digital Red LED Bar Graph Display Ultra Bright for R8.95

MAX7219 Red Dot Matrix Module 8-Digit LED Control Display Tube For Arduino MCU is available now from our US   warehouse Free shipping to US  in 3-6 business days ship to Canada, Brazil in 7-10 days MAX7219 Red 8 Bit Digital Tube LED Display Module For Arduino MCU Description: MAX7219 is an integrated serial input / output common-cathode display drivers, which connects the microprocessor and 8 bit 7-segment digital LED display, you can also connect a bar graph display or 64 separate LED. Includes an on-chip type B BCD encoders, multi-channel scanning loop, segment word driver, but also a 8x8 static RAM that stores each data. Only one external register is used to set the current of each LED segment. A convenient four-wire serial interface can connect all common microprocessor. Each data can be addressed in the update without rewriting all displays. MAX7219 also allows the user to select each data encoding or no coding. The entire device includes a 150μA low-power shutdown mode, analog and digital brightness control, a scan-limit register allows the user to display 1-8 bit data, there is an all LED light detection mode. Feature: 0.36 inch Common cathode Only need three IO ports can drive 8 bit digital tube The module compatible of 5V / 3.3V microcontroller (51 / AVR / STM32...) PCV board four corners of the fixed copper stud, which can effectively precent short circuit accidents happen Wiring instructions (a program, for example, you can pick any IO port definition can be modified in the program): VCC to 5V, GND to GND, DIN to P00, CLK to P02, CS to P01 Note: VCC and GND do not reversed, it would burn the chip. 51 MCU P0 port requires pull-up resistor, if your device does not have a pull-up resistor can be connected to other ports data lines. Package included: 1 x MAX7219 8 bit digital tube module 4 x Copper pillar 4 x Screws

Buy 1PC 0.36Inch 7 Segment 4 Digit Common Anode 0.36 Inch RED LED Digital Display... for R109.00

3Pcs MAX7219 Red 8 Bit Digital Tube LED Display Module For Arduino MCU Description: MAX7219 is an integrated serial input / output common-cathode display drivers, which connects the microprocessor and 8 bit 7-segment digital LED display, you can also connect a bar graph display or 64 separate LED. Includes an on-chip type B BCD encoders, multi-channel scanning loop, segment word driver, but also a 8x8 static RAM that stores each data. Only one external register is used to set the current of each LED segment. A convenient four-wire serial interface can connect all common microprocessor. Each data can be addressed in the update without rewriting all displays. MAX7219 also allows the user to select each data encoding or no coding. The entire device includes a 150μA low-power shutdown mode, analog and digital brightness control, a scan-limit register allows the user to display 1-8 bit data, there is an all LED light detection mode. Feature: 0.36 inch Common cathode Only need three IO ports can drive 8 bit digital tube The module compatible of 5V / 3.3V microcontroller (51 / AVR / STM32...) PCV board four corners of the fixed copper stud, which can effectively precent short circuit accidents happen Wiring instructions (a program, for example, you can pick any IO port definition can be modified in the program): VCC to 5V, GND to GND, DIN to P00, CLK to P02, CS to P01 Note: VCC and GND do not reversed, it would burn the chip. 51 MCU P0 port requires pull-up resistor, if your device does not have a pull-up resistor can be connected to other ports data lines. Package included: 3 x MAX7219 8 bit digital tube module 12 x Copper pillar 12 x Screws

5Pcs MAX7219 Red 8 Bit Digital Tube LED Display Module For Arduino MCU Description: MAX7219 is an integrated serial input / output common-cathode display drivers, which connects the microprocessor and 8 bit 7-segment digital LED display, you can also connect a bar graph display or 64 separate LED. Includes an on-chip type B BCD encoders, multi-channel scanning loop, segment word driver, but also a 8x8 static RAM that stores each data. Only one external register is used to set the current of each LED segment. A convenient four-wire serial interface can connect all common microprocessor. Each data can be addressed in the update without rewriting all displays. MAX7219 also allows the user to select each data encoding or no coding. The entire device includes a 150μA low-power shutdown mode, analog and digital brightness control, a scan-limit register allows the user to display 1-8 bit data, there is an all LED light detection mode. Feature: 0.36 inch Common cathode Only need three IO ports can drive 8 bit digital tube The module compatible of 5V / 3.3V microcontroller (51 / AVR / STM32...) PCV board four corners of the fixed copper stud, which can effectively precent short circuit accidents happen Wiring instructions (a program, for example, you can pick any IO port definition can be modified in the program): VCC to 5V, GND to GND, DIN to P00, CLK to P02, CS to P01 Note: VCC and GND do not reversed, it would burn the chip. 51 MCU P0 port requires pull-up resistor, if your device does not have a pull-up resistor can be connected to other ports data lines. Package included: 5 x MAX7219 8 bit digital tube module 20 x Copper pillar 20 x Screws

Feature: This is 8-digit 7-segment display module (YELLOW). The display features one decimal point per digit, all points can individually controllable. Module connecting to digital I/O on 3 pins. Size: 120x57mm LED color: Yellow Package includes: 1 x 8-Digit LED Display Tube

Description: The HT16K33 is a memory mapping and multi-function LED controller driver. The max. Display segment numbers in the device is 128 patterns (16 segments and 8 commons) with a 13*3 (MAX.) matrix key scan circuit. The software configuration features of the HT16K33 makes it suitable for multiple LED applications including LED modules and display subsystems. The HT16K33 is compatible with most microcontrollers and communicates via a two-line bidirectional I2C-bus. Feature: Operating voltage: 4.5V~5.5V. Integrated RC oscillator. I2C-bus interface. 16*8 bits RAM for display data storage. Max. 16 x 8 patterns, 16 segments and 8 commons. R/W address auto increment. Max. 13 x 3 matrix key scanning. 16-step dimming circuit. Selection of 20/24/28-pin SOP package types. Applications: Industrial control indicators. Digital clocks, thermometers, counters, multimeters. Combo sets. VCR sets. Instrumentation readouts. Other consumer applications. LED Displays. Package included: 3 x Module

Description: The HT16K33 is a memory mapping and multi-function LED controller driver. The max. Display segment numbers in the device is 128 patterns (16 segments and 8 commons) with a 13*3 (MAX.) matrix key scan circuit. The software configuration features of the HT16K33 makes it suitable for multiple LED applications including LED modules and display subsystems. The HT16K33 is compatible with most microcontrollers and communicates via a two-line bidirectional I2C-bus. Feature: Operating voltage: 4.5V~5.5V. Integrated RC oscillator. I2C-bus interface. 16*8 bits RAM for display data storage. Max. 16 x 8 patterns, 16 segments and 8 commons. R/W address auto increment. Max. 13 x 3 matrix key scanning. 16-step dimming circuit. Selection of 20/24/28-pin SOP package types. Applications: Industrial control indicators. Digital clocks, thermometers, counters, multimeters. Combo sets. VCR sets. Instrumentation readouts. Other consumer applications. LED Displays. Package included: 1 x Module

Description: The HT16K33 is a memory mapping and multi-function LED controller driver. The max. Display segment numbers in the device is 128 patterns (16 segments and 8 commons) with a 13*3 (MAX.) matrix key scan circuit. The software configuration features of the HT16K33 makes it suitable for multiple LED applications including LED modules and display subsystems. The HT16K33 is compatible with most microcontrollers and communicates via a two-line bidirectional I2C-bus. Feature: Operating voltage: 4.5V~5.5V. Integrated RC oscillator. I2C-bus interface. 16*8 bits RAM for display data storage. Max. 16 x 8 patterns, 16 segments and 8 commons. R/W address auto increment. Max. 13 x 3 matrix key scanning. 16-step dimming circuit. Selection of 20/24/28-pin SOP package types. Applications: Industrial control indicators. Digital clocks, thermometers, counters, multimeters. Combo sets. VCR sets. Instrumentation readouts. Other consumer applications. LED Displays. Package included: 10 x Module

4+2(Mic) Channel mixer - (Line, Phono & USB Inputs) Dual BPM LCD Counter Display Multi DSP Effects on all Channels USB 2.0 In-Out Soundcard (Play & Record) Low, Mid & High EQ | Channel (-26dB | +12dB) 10 Segment LED VU meter | Input Channel Dual 10 Segment LED VU Output meter Balances Line Main Outputs & Unbalanced Output PC | Windows 7/8/10, Mac | OS x 10.8, 10.9 Compatable 1GB RAM (2GB Recommended)

12 channel PA-mixing console with very low noise architecture ALT 3-4 bus (2 subgroups) Internal 24bit DSP-effect unit with 100 presets & foot switch USB in/out for direct recording to PC 8 balanced input channels, 4 Mono + 4stereo: Input gain Inserts on mono channels Peak indication @ -5dB High pass filter @ 75Hz 3band equalizer (12kHz/2,5kHz/80Hz) AUX send with pre/post switch EFX send for effects section (post) PAN/BAL control ALT 3-4 / Channel mute button LEVEL with 60mm fader control 48V Phantom power on all balanced micros Use of external effects possible Balanced Main L/R output control Headphone and control room output 2x 10section LED VU-meters External power transformer 19''brackets voor rack mounting included Free recording software available: Audacity Max output level (0.5% thd @ 1kHz): +26dB (MAIN L/R) +20dB (ALT 3/4, AUX/EFX, CTRL ROOM) +20dB (INSERT) More than 100mW (HEADPHONES) @33Ohm T.H.D: dB 20Hz~20kHz (MIX L/R, ALT 3/4, AUX/EFX SEND, CTRL ROOM) @10kOhm Frequency response: 20Hz~20kHz, +1/-2dB (MIX L/R, ALT 3/4, AUX/EFX SEND, CTRL ROOM) @10kOhm Hum and Noise (average Rs=150Ohm): -127dB equivalent input noise -95dB residual noise (MIX L/R, AUX SEND, EFX SEND, CTRL ROOM) -88dB (MIX L/R, AUX SEND, EFX SEND, CTRL ROOM) Master fader at nominal level and all channel volumes at minimum. Maximum Voltage Gain: 74dB MIC IN TO MAIN L/R 74dB MIC IN TO ALT dB MIC IN TO AUX (PRE) 76dB MIC IN TO AUX (POST) 76dB MIC IN TO EFX 80dB MIC IN TO CONTROL ROOM L/R 52.2dB IN TO REC L/R 54dB LINE IN TO MAIN L/R 54dB LINE IN TO ALT dB LINE IN TO AUX (PRE) 56dB LINE IN TO AUX (POST) 60dB LINE IN TO CONTROL ROOM L/R 44dB STEREO IN TO MAIN L/R 44dB STEREO IN TO ALT dB AUX RETURN IN TO MAIN L/R 20dB TAPE IN TO MAIN L/R Crosstalk (@ 1kHz): -70dB between input channels -70dB between input/oputput channels Gain Control (mono input channel) 44dB Variable (-50dB ~ -6dB) (-30dB ~ +14dB) Gain Control (combined mono/stereo input channel) 40dB Variable (-20dB ~ +20dB)p Input channel Equalization: HIGH: 12kHz shelving MID: 2.5kHz peaking LOW: 80Hz shelving *Turnover/roll off frequencies: located 3dB below max. boost/cut LED Meters: 2x 10 segment LED for MAIN L/R, ALT3/4, TAPE IN or PFL Internal Digital Effect: 100 selectable presets FOOT Switch control (ON/OFF) Channel indicators: Peak: an indicator for each channel turns on when the pré-channel fader signal is 5dB below clipping Phantom Power (balanced input): +48V DC Power Supply: AC 230 V, 50Hz Power consumption: 36W Weight: 4,6 kg Dimensions: 328(W) x 90(H) x 420(D) mm

8 channel PA-mixing console with very low noise architecture Internal 24bit DSP-effect unit with 100 pre-sets & foot switch USB in/out for direct recording to PC 4 balanced microphone input channels, 2 mono line + 3 stereo line: Input gain Inserts on mono channels Peak indication @ -5dB High pass filter @ 75Hz 3band equalizer (12kHz/2,5kHz/80Hz) AUX send for monitoring (pre) EFX send for effects section (post) PAN/BAL control LEVEL with rotary control 48V Phantom power on all balanced micros Use of external effects possible Balanced Main L/R output control Headphone and control room output 2x 10section LED VU-meters External power transformer Free recording software available: click the logo to start download. Max output level (0.5% thd @ 1kHz): +26dB (MAIN L/R) +20dB (INSERT) T.H.D: Frequency response: 20Hz~20kHz, +1/-2dB (MIX L/R, AUX SEND, EFX SEND, CTRL ROOM) Hum and Noise (average Rs=150Ohm): -127dB equivalent input noise -95dB residual noise (MIX L/R, AUX SEND, EFX SEND, CTRL ROOM) -88dB (MIX L/R, AUX SEND, EFX SEND, CTRL ROOM) Master fader at nominal level and all channel volumes at minimum. Maximum Voltage Gain: 66dB MIC IN TO MAIN L/R 60dB MIC IN TO AUX 66dB MIC IN TO EFX 76dB MIC IN TO CONTROL ROOM L/R 58.2dB IN TO REC L/R 46dB LINE IN TO MAIN L/R 46dB LINE IN TO AUX 46dB LINE IN TO EFX 56dB LINE IN TO CONTROL ROOM L/R 36dB STEREO IN TO MAIN L/R 6dB AUX RETURN IN TO MAIN L/R 16dB TAPE IN TO MAIN L/R Crosstalk (@ 1kHz): -70dB between input channels -70dB between input/oputput channels Gain Control (mono input channel) 44dB Variable (-50dB ~ -6dB) (-30dB ~ +14dB) Gain Control (combined mono/stereo input channel) 40dB Variable (-20dB ~ +20dB) Input channel Equalization: HIGH: 12kHz shelving MID: 2.5kHz peaking LOW: 80Hz shelving *Turnover/roll off frequencies: located 3dB below max. boost/cut LED Meters: 2x 10 segment LED for MAIN L/R Internal Digital Effect: 100 selectable presets FOOT Switch control (ON/OFF) Channel indicators: Peak: an indicator for each channel turns on when the pré-channel fader signal is 5dB below clipping Phantom Power (balanced input): +48V DC Power Supply: AC 230 V, 50Hz Power consumption: 25W Weight: 3,4 kg Dimensions: 249(W) x 75(H) x 295(D) mm

The S com 4 is a compact and versatile single-rack space device that provides four channels of high quality dynamics processing with an Expander/Gate and Compressor/Limiter on each channel. The four channels operate independently or in stereo pairs. Its multi-segment LED metering displays input/output level as well as gain reduction. The Expander/Gate section features a continuously variable Threshold control as well as a switch for fast or slow release times. The Compressor/Limiter section includes variable Threshold, Ratio and Output levels. S com 4's Enhancer switch restores high frequencies that are sometimes diminished by heavy compression. This wide-ranging combination of features makes the S com 4 an efficient and versatile audio tool for a wide variety of applications. Its clean and quiet audio characteristics make it ideal where high sonic integrity is imperative. 4 Channel Compressor/Limiter, Expander/Gate with Enhancer Linkable in two Stereo pairs Expander/Gate with variable Trigger control and switchable Fast/Slow Release 5 Segment LED meters for Input / Output levels and Gain Reduction on each channel Advanced circuit design utilizing Low Noise Operational Amplifiers and High Quality VCA's Servo Balanced Inputs and Outputs on XLR and 1/4" connectors SKD (Smart Knee Detector) circuit automatically switches from soft to hard knee based on the level of Input signal applied Individual Threshold and Ratio controls on each channel

The PMX 710 from Wharfedale Pro is a class-leading lightweight, compact and portable powered mixer.  Designed to be a perfect balance of portability and power the PMX 710 is suitable for use in a wide range of portable sound applications. Everything you need to mix and amplify microphones and line level sources is included in one box, with an ergonomic carry handle to aid transportation. The one box concept speeds up your setup time and allows you to start your performance quicker than ever before.  The PMX 710 features built in digital FX processing, expanding your creativity and improving your sound quality without the need for additional expensive and often cumbersome processors. A graphic EQ allows fine tuning of the overall mix; the PMX 710 has a flexible routing system that allows you to EQ your front of house and monitor speakers in mono or your front of house in stereo.  6 Phantom powered XLR microphone inputs allow you to connect any type of microphone, line level inputs are available with both ¼” jacks and RCA connectors. The PMX710 includes a full-duplex USB playback/record interface and pan/balance controls. The main outputs use Speakon™/¼” jack Combi connections for maximum reliability and versatility. Features: USB Interface 2x 250W into 4Ω Lightweight Class-D Amplifier Lightweight, High-Efficiency Switch-Mode Power Supply 6 Phantom Powered Balanced XLR Mic Inputs ¼” Jack and RCA Line Level Inputs Peak Indicator for Each Channel 3-Band EQ on Mono Channels 2-Band EQ on Stereo Channels Built-in Digital FX 2x 7-Band Graphic EQ on Master Section 4 Segment LED Metering ¼” Jack/Speakon™ Main Outputs 1 year limited guarantee. For more info on this product please click here

Includes 15" Sub, 2x10" Tops, Built-in mixer with Effects, Stands and Cables. Perfect for Mobile DJ or One Man Band. Active PA system comprising of a sub cabinet with integral amplifier feeding 2 satellite cabinets. The sub cabinet also houses a versatile mixing console with effects for vocals and line inputs for instruments and playback devices. Built-in 6 input mixer with effects 2 x balanced XLR mic inputs + 2 x 6.3mm line inputs Main, Line, Aux and Pre outputs Twin RCA inputs on rear panel 3 band EQ and Aux control on each channel Sub-bass Frequency and Level controls Headphone output with level control Dual 6 segment LED level indicator Castors fitted for transportation Supplied with 2 x 5m speaker leads and 2 compact speaker stands set

8 Ohms x 2: 400W RMS, 4 Ohms x 2: 620W RMS The CPD1600 is part of Wharfedale Pro’s latest line of professional power amplifiers driving earth shaking audio from the front of your venue, all the way to the back. For using in stereo the amplifier delivers 400W RMS per channel at 8 Ohms and 650W RMS per channel at 4 Ohms; a suitable power for small to medium sized complete PA systems. In bridged mode at 4 Ohms the amplifier generates 1600W RMS, perfect for powering a subwoofer integrated into a larger PA system for example.Maximum headroom audio fidelity and durability are of course vital, whilst additionally we pride ourselves on unbeatable value. The CPD series is manufactured under our strict quality assurance as are all Wharfedale Pro products, making an amp you can trust from price to performance. Technology Working in stereo, parallel and bridged modes CPD1600 is built for a multitude of sound system formations. Brand new class AB topology has resulted in a dynamic, high headroom amp made for propelling your loudspeakers through thick and thin with complete clarity. Precision Control Large rotary dials accurately adjust gain levels, and you will know when to do so from the clear and simple front panel. A 4 segment led formation displays shows vital power status, level, limit and protect information, keeping the sound engineer in the know. Protection and Durability The CPD1600 is rife with technology that offers complete protection for your peace of mind. A built-in switchable limiter allows over 8Vrms signal through without distortion. Additionally it is equipped with thermal, overcurrent, DC and output short protect features. Professional audio equipment is an investment. That is why the adept components of the amplifier are housed within a 2U steel chassis which is universally rack mountable. This hard wearing all-steel casing also features a removable air filter in the front bracket which can be cleaned or replaced easily. 8 Ohms x 2: 400W RMS 4 Ohms x 2: 620W RMS 8 Ohms Bridged: 1200W RMS 4 Ohms Bridged: 1600W RMS Class AB Technology Status and clip LEDs Thermal, overcurrent, DC and output short protect circuitry 2 x Speakon outputs 2 x XLR outputs to link other audio equipment 2 x XLR inputs Peak and protect LEDs Built-in switchable limiter Continuously variable speed fan Suitable for small to medium sized venues

Roland AXSYNTHBK Shoulder Synthesizer - Built-in sound engine with voices from Roland¿s latest synthesizers Ribbon controller, D Beam, modulation bar, knobs, and easy to see display for stage USB MIDI for easy connection to PC Dedicated V-LINK button for video/visual control Long battery operation (approx. 6 hours) Keyboard 49 Keys (with velocity) Sound Generator Maximum Polyphony 128 voices Tones 256 Tones + 8 Special Tones (including SuperNATURAL) Controllers D-Beam, Ribbon Touch, Modulation Bar, Volume Knob Controller, Aftertouch Knob Controller, Portamento On/Off, Hold button On/Off, Bender Mode: Normal/Catch+Last Connectors Output Jacks: 2 x 1/4' inch phone type (L/MONO, R), Headphones (Stereo 1/4' inch phone type), Foot Pedal, USB connector (USB MIDI), MIDI connector (IN/OUT), AC Adaptor Others Battery 8 x Ni-MH rechargeable Batteries Display (3 x 7) segment LED Accessories Owner's Manual, Shoulder strap, AC Adaptor (PSB-1U) Size and Weight (excluding batteries) Width 1,142 mm 45 inches Depth 266 mm 10-1/2 inches Height 87 mm 3-7/16 inches Weight 3.9 kg 8 lbs. 10 oz. *

The CPD2600 is part of Wharfedale Pro’s latest line of professional power amplifiers driving earth shaking audio from the front of your venue, all the way to the back. For using in stereo the amplifier delivers 650W RMS per channel at 8 Ohms and 1000W RMS per channel at 4 Ohms; a suitable power for small to large sized complete PA systems. In bridged mode at 4 Ohms the amplifier generates 2600W RMS. This huge power means the amplifier can also integrate itself with larger touring rigs and installs where long throw, extremely high power audio is needed. 8 Ohms x 2: 650W RMS 4 Ohms x 2: 1000W RMS 8 Ohms Bridged: 1940W RMS 4 Ohms Bridged: 2600W RMS Class AB Technology Status and clip LEDs Thermal, overcurrent, DC and output short protect circuitry 2 x Speakon outputs 2 x XLR outputs to link other audio equipment 2 x XLR inputs Peak and protect LEDs Built-in switchable limiter Continuously variable speed fan Suitable for touring, rental and installation Stereo Power Output 8 Ohms x 2 650W RMS 4 Ohms x 2 1000W RMS Bridged Mono Output 8 Ohms 1940W RMS 4 Ohms 2600W RMS Inputs 2 x XLR Outputs 2 x XLR, 2 x Speakon Frequency Response 20Hz - 30KHz Topology Class H Sensitivity 0dBu (0.775Vrms) Input Impedance 20K Ohms Maximum Input Level 22dBu (9.7Vrms) Slew Rate >40V / us Crosstalk 100dB Protection Switchable Limiter, Thermal protect, Over-current protect, Output DC protect, Output short protect, Power on/off mute Display 4 segment LED Cooling Variable Speed Fan Dimensions 88 x 483 x 451mm Net Weight 21kg / 46.30lbs Gross Weight 23kg / 50.71lbs

SONIFEX - SON-CM-CU21TP Commentator Unit Transport Case The CM-CU1 offers the same high quality, robust specification as the CM-CU21, with a feature set tailored to single commentator applications. It provides a fully featured commentator position and a line-level input. The unit has an individual commentator output, with an additional output providing a mix of commentator and line input audio. A limit indicator on the main panel shows when the adjustable limiter on the main output is active, and a bright 21 segment LED PPM meter, which can be disabled, shows the main output level.

Active PA system comprising of a sub cabinet with integral amplifier feeding 2 satellite cabinets. The sub cabinet also houses a versatile mixing console with effects for vocals and line inputs for instruments and playback devices. Built-in 6 input mixer with effects 2 x balanced XLR mic inputs + 2 x 6.3mm line inputs Main, Line, Aux and Pre outputs Twin RCA inputs on rear panel 3 band EQ and Aux control on each channel Sub-bass Frequency and Level controls Headphone output with level control Dual 6 segment LED level indicator Castors fitted for transportation Supplied with 2 x 5m speaker leads and 2 compact speaker stands set Power Supply: 230Vac, 50Hz Satellite Impedance: 8 ohms THD: Sub Driver: 380mm (15in) Satellite Main Drivers: 250mm (10in) Output Power RMS: 350 + 125 + 125W Frequency Response: 38Hz - 18kHz Dimensions - Sub Cabinet: 670 x 480 x 530mm Dimensions - Satellite Speaker: 500 x 340 x 290mm Weight - Sub Cabinet: 30.4kg Weight - Satellite Speaker: 11kg