SYNQ SMP USB MIXER IN DURBAN

12 channel PA-mixing console with very low noise architecture ALT 3-4 bus (2 subgroups) Internal 24bit DSP-effect unit with 100 presets & foot switch USB in/out for direct recording to PC 8 balanced input channels, 4 Mono + 4stereo: Input gain Inserts on mono channels Peak indication @ -5dB High pass filter @ 75Hz 3band equalizer (12kHz/2,5kHz/80Hz) AUX send with pre/post switch EFX send for effects section (post) PAN/BAL control ALT 3-4 / Channel mute button LEVEL with 60mm fader control 48V Phantom power on all balanced micros Use of external effects possible Balanced Main L/R output control Headphone and control room output 2x 10section LED VU-meters External power transformer 19''brackets voor rack mounting included Free recording software available: Audacity Max output level (0.5% thd @ 1kHz): +26dB (MAIN L/R) +20dB (ALT 3/4, AUX/EFX, CTRL ROOM) +20dB (INSERT) More than 100mW (HEADPHONES) @33Ohm T.H.D: dB 20Hz~20kHz (MIX L/R, ALT 3/4, AUX/EFX SEND, CTRL ROOM) @10kOhm Frequency response: 20Hz~20kHz, +1/-2dB (MIX L/R, ALT 3/4, AUX/EFX SEND, CTRL ROOM) @10kOhm Hum and Noise (average Rs=150Ohm): -127dB equivalent input noise -95dB residual noise (MIX L/R, AUX SEND, EFX SEND, CTRL ROOM) -88dB (MIX L/R, AUX SEND, EFX SEND, CTRL ROOM) Master fader at nominal level and all channel volumes at minimum. Maximum Voltage Gain: 74dB MIC IN TO MAIN L/R 74dB MIC IN TO ALT dB MIC IN TO AUX (PRE) 76dB MIC IN TO AUX (POST) 76dB MIC IN TO EFX 80dB MIC IN TO CONTROL ROOM L/R 52.2dB IN TO REC L/R 54dB LINE IN TO MAIN L/R 54dB LINE IN TO ALT dB LINE IN TO AUX (PRE) 56dB LINE IN TO AUX (POST) 60dB LINE IN TO CONTROL ROOM L/R 44dB STEREO IN TO MAIN L/R 44dB STEREO IN TO ALT dB AUX RETURN IN TO MAIN L/R 20dB TAPE IN TO MAIN L/R Crosstalk (@ 1kHz): -70dB between input channels -70dB between input/oputput channels Gain Control (mono input channel) 44dB Variable (-50dB ~ -6dB) (-30dB ~ +14dB) Gain Control (combined mono/stereo input channel) 40dB Variable (-20dB ~ +20dB)p Input channel Equalization: HIGH: 12kHz shelving MID: 2.5kHz peaking LOW: 80Hz shelving *Turnover/roll off frequencies: located 3dB below max. boost/cut LED Meters: 2x 10 segment LED for MAIN L/R, ALT3/4, TAPE IN or PFL Internal Digital Effect: 100 selectable presets FOOT Switch control (ON/OFF) Channel indicators: Peak: an indicator for each channel turns on when the pré-channel fader signal is 5dB below clipping Phantom Power (balanced input): +48V DC Power Supply: AC 230 V, 50Hz Power consumption: 36W Weight: 4,6 kg Dimensions: 328(W) x 90(H) x 420(D) mm