SYNQ SMP 8.2 USB MIXER IN DURBAN

8 channel PA-mixing console with very low noise architecture Internal 24bit DSP-effect unit with 100 pre-sets & foot switch USB in/out for direct recording to PC 4 balanced microphone input channels, 2 mono line + 3 stereo line: Input gain Inserts on mono channels Peak indication @ -5dB High pass filter @ 75Hz 3band equalizer (12kHz/2,5kHz/80Hz) AUX send for monitoring (pre) EFX send for effects section (post) PAN/BAL control LEVEL with rotary control 48V Phantom power on all balanced micros Use of external effects possible Balanced Main L/R output control Headphone and control room output 2x 10section LED VU-meters External power transformer Free recording software available: click the logo to start download. Max output level (0.5% thd @ 1kHz): +26dB (MAIN L/R) +20dB (INSERT) T.H.D: Frequency response: 20Hz~20kHz, +1/-2dB (MIX L/R, AUX SEND, EFX SEND, CTRL ROOM) Hum and Noise (average Rs=150Ohm): -127dB equivalent input noise -95dB residual noise (MIX L/R, AUX SEND, EFX SEND, CTRL ROOM) -88dB (MIX L/R, AUX SEND, EFX SEND, CTRL ROOM) Master fader at nominal level and all channel volumes at minimum. Maximum Voltage Gain: 66dB MIC IN TO MAIN L/R 60dB MIC IN TO AUX 66dB MIC IN TO EFX 76dB MIC IN TO CONTROL ROOM L/R 58.2dB IN TO REC L/R 46dB LINE IN TO MAIN L/R 46dB LINE IN TO AUX 46dB LINE IN TO EFX 56dB LINE IN TO CONTROL ROOM L/R 36dB STEREO IN TO MAIN L/R 6dB AUX RETURN IN TO MAIN L/R 16dB TAPE IN TO MAIN L/R Crosstalk (@ 1kHz): -70dB between input channels -70dB between input/oputput channels Gain Control (mono input channel) 44dB Variable (-50dB ~ -6dB) (-30dB ~ +14dB) Gain Control (combined mono/stereo input channel) 40dB Variable (-20dB ~ +20dB) Input channel Equalization: HIGH: 12kHz shelving MID: 2.5kHz peaking LOW: 80Hz shelving *Turnover/roll off frequencies: located 3dB below max. boost/cut LED Meters: 2x 10 segment LED for MAIN L/R Internal Digital Effect: 100 selectable presets FOOT Switch control (ON/OFF) Channel indicators: Peak: an indicator for each channel turns on when the pré-channel fader signal is 5dB below clipping Phantom Power (balanced input): +48V DC Power Supply: AC 230 V, 50Hz Power consumption: 25W Weight: 3,4 kg Dimensions: 249(W) x 75(H) x 295(D) mm