Rode studio

Buy RØDE Procaster Professional Broadcast Quality Dynamic Microphone *MINT* Rode studio podcast vocal for R2,399.00

Rode - NT1A-MP Matched Pair Studio Cardioid Condenser Microphone Ultimately the way to judge a mic is by its sound. We put the RODE NT1-A through its paces here at Sweetwater Studios and were knocked out by its sonic performance. From acoustic guitars to guitar amplifiers to vocals to percussion, the NT1-A excelled in every application for which it was tested, and it handled high-SPL sources without a problem. With only 5dB of self-noise, the NT1-A, winner of the Electronic Musician Editors Choice Award, is the world's quietest studio condenser microphone. It provides the warmth, extended dynamic range, clarity, and high SPL capability previously only possible with the very best and most expensive microphones. Finished in durable satin nickel, the NT1-A is supplied with a shockmount and zip pouch. The frequency response is very smooth all the way from 20Hz to 20kHz. Anyone seeking an affordable large-diaphragm condenser for their studio should not fail to listen to the versatile NT1-A. The NT1-A-MP is a matched pair of Rode NT1-A's.

Rode - NT1A-MP Matched Pair Studio Cardioid Condenser Microphone Ultimately the way to judge a mic is by its sound. We put the RODE NT1-A through its paces here at Sweetwater Studios and were knocked out by its sonic performance. From acoustic guitars to guitar amplifiers to vocals to percussion, the NT1-A excelled in every application for which it was tested, and it handled high-SPL sources without a problem. With only 5dB of self-noise, the NT1-A, winner of the Electronic Musician 2004 Editors Choice Award, is the world's quietest studio condenser microphone. It provides the warmth, extended dynamic range, clarity, and high SPL capability previously only possible with the very best and most expensive microphones. Finished in durable satin nickel, the NT1-A is supplied with a shockmount and zip pouch. The frequency response is very smooth all the way from 20Hz to 20kHz. Anyone seeking an affordable large-diaphragm condenser for their studio should not fail to listen to the versatile NT1-A. The NT1-A-MP is a matched pair of Rode NT1-A's.

Rode S1 Stage Condenser Large Diaphragm Mic - The RØDE S1 live condenser vocal microphone provides the ultimate in performance for artists and engineers that demand studio quality audio while on stage without compromising on mobility, versatility or durability. At the heart of the S1 is a super-cardioid 1/2" true condenser capsule tuned to virtually eliminate feedback in on stage performance. The combination of sophisticated internal shock mounting and a built in high-pass filter dramatically reduces undesirable low frequency background noise and handling noise. Multiple layers of acoustically optimised steel mesh in the microphone head filters breath, wind and plosive noises without affecting the microphone sensitivity or frequency response. The S1 is also an ideal handheld studio vocal microphone for artists that prefer to hold the microphone during recording. The RØDE S1 live condenser vocal microphone is covered by RØDE Microphones' industry leading 10 year warranty. *

Rode - K2 Infinite Pattern Tube Condenser Microphone For recording vocals, guitar amps, bass cabinets, horns, and more, there's nothing like a vacuum-tube large-diaphragm condenser microphone. Some tube condensers sell for many thousands of dollars, but thanks to the Rode K2, engineers on a budget can capture lush, rich recordings with tons of tube-driven character. Though the K2's price tag puts it within reach of project studios, there's nothing "budget" about its performance. Rode is known for studio microphones that deliver incredible low-noise specs, and the K2 is no exception, with self-noise of only 10 dBA thanks to Class A valve circuitry. And not only is the super-quiet K2 great for tracking delicate vocals and acoustic instruments, it can handle a respectable maximum SPL of 162 dB -- so feel free to try your K2 on a cranked-up amp. As you'd expect from any pro tube mic, the K2 has a continuously variable pattern knob that lets you dial in a pickup pattern to suit your source. Try a tight, focused cardioid for a larger-than-life, in-your-face sound -- or twist the dial to an omni pattern for that more natural, you-are-there quality. However you choose to use it, the Rode K2 is an ideal first tube microphone for the small studio looking to expand their sonic palette without breaking the bank.

Rode - NT2-A Studio Diaphragm Condenser W/B Microphone The NT2-A microphone is Rode's response to the evolving needs of the modern recording engineer. It was designed with an emphasis on versatility while maintaining a wide, natural sound. With a frequency response extending below 20 Hz and above 20 kHz, this microphone can capture the subtle harmonics of any instrument with an extremely high level of detail. Considering its wide frequency range and three switchable polar patterns, it's easy to see why the NT2-A is an increasingly popular choice in both home and professional studios for recording acoustic instruments like drums, voice and piano. The NT2-A is a perfect solution for the engineer who wants to constantly experiment with new and interesting sounds without sacrificing sonic quality. Because of its flexibility, the NT2-A has been the go-to microphone for a wide range of famous recording artists. From Lil' Wayne's iconic vocals to the distinct guitar tone of Queens of the Stone Age, this mic has been crucial in shaping distinctive sounds.

Rode - RODPCAST Podcaster USB Microphone Seamless integration was the idea, and it was obtained by creating a studio dynamic microphone with unparalleled A/D converters, so that the microphone can be plugged into any computer with no in/out boxes, no expensive computer pre-amps, just a USB cable. The Podcaster offers an end-address configuration, the clarity of RØDE’s tailored-for-voice frequency response, an ‘ON’ L.E.D, a direct headphone amp, and of course very low self noise. The microphone comes complete with a 3M USB cable. Optional extras include a shock mounting system and soon to be released Anglepoise style table mount arm. It’s a must for any musician on the road or in the project studio, but the Podcaster is going to offer solutions to more than just musicians. The mic opens up possibilities for anyone who records audio—from podcasters, journalists and students to business people adding audio files to websites and multimedia presentations. Create your own radio show, or let us do it for you, as we have even developed a website to host and broadcast podcasts for RØDE Podcaster customers.

Rode - NT45-O OMNI Capsule For NT45 Mic If you want that "being in the room with the music" feeling in your recordings, the way to achieve that is with an omnidirectional mic. If you already have a RODE NT6, NT4, NT5, NT5-S, or NT55 cardioid mic and don't want to spring for another mic, RODE offers the NT45-O capsule as an alternative, which will work with the aforementioned RODE mics. The RODE NT45 capsules offer a selection of frequency responses and polar patterns in a convenient and easy to use interchangeable format. The capsules are designed for studio recording, live sound reinforcement, and any application where sound quality and mounting flexibility are required. Designed and manufactured in Australia, the NT45-O capsule offers high SPL capabilities with low distortion and noise.

Rode - M2 Live Performance Condenser Microphone The M2 Live Performance Condenser Microphone benefits from RØDE's extensive experience in crafting premium condenser microphones for studio, live and location use and is a direct result of the foundation set by the award winning S1. Combining sound quality equal to that of the finest studio microphones with features such as integrated shock mounting to reduce handling noise and a tailored response to reduce feedback, the M2 is a sturdy and versatile addition to your live microphone kit.

Rode - NT3 Condenser Microphone Stylish and modern, the nickel-body NT3 represents RODE's outstanding microphone technology. Built for studio, stage, and location work, the NT3 is made from only the finest components, and delivers the sonic results demanded by engineers and musicians alike. A true condenser microphone, the NT3 can be powered via its internal battery or by external phantom power. Its low self-noise, high fidelity performance, and value pricing makes it hard to beat.

Rode - Classic II Microphone The Classic II is Rode's top-of-the-line studio condenser microphone. Classic by name and nature. Featuring a custom spec 1 in. dual diaphragm capsule feeding a vintage twin triode (New old stock) GE JAN- valve and custom Jensen output transformer. The result? Classic warmth and richness on both vocals and acoustic instruments.

Rode - Classic II Microphone The Classic II is Rode's top-of-the-line studio condenser microphone. Classic by name and nature. Featuring a custom spec 1 in. dual diaphragm capsule feeding a vintage twin triode (New old stock) GE JAN-6072 valve and custom Jensen output transformer. The result? Classic warmth and richness on both vocals and acoustic instruments.

Rode - M3 Dual Power Condenser Microphone The M3 is an extremely versatile microphone that is at home in the studio, on location, or wherever a low-noise wide-response cardioid condenser microphone is demanded. An end address condenser microphone, the M3 features a heavy-duty metal body, category leading low self-noise, three stage PAD (O, -10db, -20db), a battery status LED and a High Pass Filter. The M3 also comes complete with windshield and a stand mount, and can be powered via a 9V battery or V Phantom.

Rode - M3 Dual Power Condenser Microphone The M3 is an extremely versatile microphone that is at home in the studio, on location, or wherever a low-noise wide-response cardioid condenser microphone is demanded. An end address condenser microphone, the M3 features a heavy-duty metal body, category leading low self-noise, three stage PAD (O, -10db, -20db), a battery status LED and a High Pass Filter. The M3 also comes complete with windshield and a stand mount, and can be powered via a 9V battery or 24-48V Phantom.

rode nt3 cardioid condensor microphone. true condenser externally biased 3/4” capsule dual power operation cast metal body with durable satin-nickel finish transformerless output internal capsule shock mounting high level of rf rejection audio-grade surface mount components full frequency response we stock a massive range of musical instrument & audio,tv,projector & pa equipment for live,church,concert,dj, & outdoor applications.our products include piano,keyboard,such as yamaha,guitar,drums,marching drums,trumpet,trombone,tuba,saxophone,dj,studio equipment,soundcards that can be used on laptops or desktop pc,we also stock an audio interface to be used in conjunction with a tablet,ipad,iphone,laptop,macbook,macbook pro,samsung and other android devices and cellphones. www.sbrprosound.co.za m audio keystation 49 r1795. ibanez btb 5-string bass guitar r11995. cort action 4string bass guitar r2495. ibanez pf15ece acoustic/electric guitar r3195. fender cd60 ce accoustic/electric guitar r3995. trumpet in case r1750. tama imperialstar r11995. korg sp280 88key digital piano r13995. yamaha psr e443 r6500. cort accoustic/electric guitar new r2200. jinbao 5pce drum set r3995. roland e09 61 keys keyboard r6495. 3 valve tuba lacquer r10995. www.sbrprosound.co.za

Rode NT3 Condenser Microphone for sale! Clearing out my mic collection. Incredible mic! Solid steel frame body. Feels like a million bucks. Works great on: -Vocals -Guitars -Percussion Instruments Great for studio or live performances. The cardioid condenser design helps pickup exactly what you need. Contact now for more details! WhatsApp now!

Heavy duty metal body Internal capsule shock mount High level of RF rejection On-mic selectable high pass filter at 80Hz-12dB/Oct (-10 and -20dB PAD) Heat-treated high-strength mesh head Battery status indicator 9V Battery Power, 24 or 48V Phantom Power Includes wind shield, mic clip and zip pouch 10 year extended warranty when you register your microphone The RØDE M3 is a highly versatile end-address condenser microphone, designed to be completely at home in the studio, on stage or on location. It is equally suitable as an instrument microphone for guitars, drums and percussion or even vocals. Featuring a heavy duty metal body and internally shock mounted 1/2" condenser capsule mounted for end-address, the M3 can be powered either via P48 phantom power, or an internal 9V battery. A -10dB and -20dB level attenuator (pad), selectable from inside the battery compartment, allows recording of loud sound sources, such as a guitar amplifier or snare drum. A high-pass filter selectable on the microphone power switch introduces a filter at 80Hz to reduce low frequency sounds and handling noise. The RØDE M3 microphone is designed and made in Australia, and covered by RØDE Microphones' industry leading 10 year warranty. Please confirm stock availability before purchasing We are an authorized dealer of the best sound, dj equipment, studio equipment and lighting Free delivery anywhere in the country on orders over a R1000 Delivery 24-48 hours to all major cities 48-72 hours to outlying areas Warranty Type: Authorized Dealer 12 Months Warranty. All goods are subject to supplier discretion Replacement Guarantee: 30 Days: All goods are subject to supplier discretion Our Shop Shop F2 Second Level The Conservatory at Lakefield 106 Lakefield Avenue Lakefield Square Benoni Contact us at 110 - show phone - Tian - 718 - show phone - /Whatsapp Carlo - 844 - show phone - /Whatsapp Trading Hours: Monday - Friday 9:00am - 17:00pm Saturday 9:00am - 15:00pm If you can't find what you are looking for give us a call and we will gladly assist you

The Rode NTG-2 is a condenser shotgun microphone designed for professional audio capturing in the field or indoors. With a history of manufacturing quality studio microphones, Rode has implemented low noise output electronics and wide bandwidth, both of which attribute to the NTG-2's broadcast sound quality. The super-cardioid polar pattern and line plus gradient acoustic principle effectively minimize audio and noise at the off-axis (sides) of the microphone, while the front of the capsule accurately reproduces incoming audio signal. The result is greater intelligibility and signal-to-noise ratio when using the NTG-2 in noisy environments. The NTG-2 is powered with an internal 1.5V AA size battery or an external 48 Volt phantom power source. The output is a standard 3-pin XLR male connector. The microphone features a rugged, all metal, lightweight enclosure that is ideal for camera mounting yet durable enough to withstand the rigors of heavy road use. The Rode NTG-2 is packaged with a microphone stand mount and windscreen. Battery Or Phantom Powered The Rode NTG-2 can be powered with an internal 1.5V AA battery or external 48V phantom power source. Super-Cardioid Polar Pattern The super-cardioid polar pattern and line gradient acoustic principle allow for a narrow pick up pattern at the front of the capsule while minimizing noise at the off-axis sections. Lightweight Durable Construction The NTG-2 features a lightweight metal housing that is ideal for camera mounting. Low Handling Noise Low noise output electronics provide high signal-to-noise ratio. The NTG-2 is designed to also reduce noise caused by handling, rigid mounting hardware, loose cabling etc. Specifications Transducer Condenser Polar Pattern Supercardioid Frequency Response 20Hz to 20kHz Sensitivity -36.0dB re 1 Volt/Pascal (15.00mV @ 94 dB SPL) /- 2 dB @ 1kHz Signal-to-Noise Ratio 76dB (1kHz rel, 1Pa; per IEC651, IEC268-15) Maximum Input Sound Level 131dB SPL (@ 1kHz, 1% THD into 1K? load) Power Requirements 48V phantom, 44V to 52V Output Impedance 250? Output Connectors 3-pin XLR balanced Pad No Low Frequency Roll-Off Selectable HPF @ 80Hz/12dB octave Dimensions 10.94 x.87" (278 x 22mm) (Length x Diameter) Weight 5 oz (161g) Shipping Info Shipping Weight 1.1 lb Box Dimensions (WxHxD) 5.984 x 2.126 x 13.307 In the Box 10 Year Warranty Microphone Stand Mount Windscreen Zippered Pouch

The Rode K2 tube condenser recording microphone delivers the sonic quality expected of a class "A" tube microphone. At the heart of the microphone is a hand-selected 6922 twin-triode valve. The valve provides warmth and detail while reproducing a flat, "un-colored" frequency response. The K2 boasts a dynamic range of 150dB. This ensures detailed, accurate pick up of low signals and distortion free, transparent pick up of transients. An external power supply provides user access of up to 3 polar patterns. Cardioid, omni-directional and figure eight are all available and the patterns are user variable, allowing custom contouring of each pattern as needed. Class" A" Valve Circuitry At the heart of the microphone is a hand-selected 6922 twin-triode valve. The tube electronics yield the warmth and transparency expected of class "A" analog electronics. Variable Polar Patterns The K2 features cardioid, omni-directional, and figure eight polar patterns. The patterns are user variable, allowing custom contouring of each pattern as needed. Wide Dynamic Range The microphone features a dynamic range of 150dB. This ensures detailed, accurate pick up of low signals and distortion free, transparent pick up of transient signals. Transducer Externally Polarized 25mm (1") Condenser Polar Pattern Cardioid, omni-directional, figure 8 user switchable Frequency Response 20Hz - 20kHz Dynamic Range (Typical) 150dB (per IEC651, IEC268-15) Signal-to-Noise Ratio > 81dB (1kHz rel 1 Pa; per IEC651, IEC268-15) Maximum Input Sound Level 162dB (@ 1% THD into 1k ohms) Power Requirements Dedicated Power Supply (110 ~ 120V/220 ~ 240V, 50/60Hz) Output Impedance 200 ohms Output Connectors 3-pin XLR Pad No Low Frequency Roll-Off No Dimensions not specified by manufacturer Weight not specified by manufacturer In the Box K2 Power Supply K2 Cable RC2 Custom Carry Case SM2 Shock Mount 1 Year Warranty

Estimated delivery time: working days (Imported from the UK) - T&C's Apply Please note that all Christmas gift orders need to be placed before the 14th of November to ensure that they are delivered to you in time. This item includes free delivery within South Africa. Instruction Manual (Acrobat pdf file)The PSA1 is a studio boom arm for radio broadcast studio and home use.The PSA1 offers a horizontal reach of 820mm a vertical reach of 840mm and full 360 degree rotation. It is supplied with velcro cable wraps and both desk-clamp and desk-insert style attachments for versatile mounting in desks up to 55mm thick (clamp) or 70mm (insert).Designed for the R DE Procaster and Podcaster the PSA1 supports most microphones weighing between 700g (1.5lb) and 1.1kg (2.4lb) when combined with shock mount.Please note that the PSM1 shock mount is sold separately.Dimensions mmH x 0.00mmW x 0.00mmD

The Rode Stereo VideoMic is a high-quality mic that is ideal for camcorders, DSLRs and audio recorders. Quick Facts: two high res 1/2" condenser capsules mounted in a fixed X/Y stereo array offers neutral studio recording Ideal for environmental and ambient sounds and live music In-built shock mounting system standard shoe mount and 3/8" thread Connects via 3.5mm stereo mini-jack box contents: Stereo Videomic and wind shield For more information, see it on the Rode website here

The Rode VideoMic is a fantastic entry level shotgun microphone to use with consumer video cameras and audio recorders. Quick Facts: studio recording quality 9v battery windshield included 3.5mm mini-jack output integrated cold-shoe mount with 3/8" thread For more information, see it on the Rode website here

Estimated delivery time: working days (Imported from the UK) - T&C's Apply This item includes free delivery within South Africa. Instruction Manual (Acrobat pdf file)The PSA1 is a studio boom arm for radio broadcast studio and home use.The PSA1 offers a horizontal reach of 820mm a vertical reach of 840mm and full 360 degree rotation. It is supplied with velcro cable wraps and both desk-clamp and desk-insert style attachments for versatile mounting in desks up to 55mm thick (clamp) or 70mm (insert).Designed for the R DE Procaster and Podcaster the PSA1 supports most microphones weighing between 700g (1.5lb) and 1.1kg (2.4lb) when combined with shock mount.Please note that the PSM1 shock mount is sold separately.Dimensions mmH x 0.00mmW x 0.00mmD

The silver Rode NTG-3 Shotgun Microphone is a professional shotgun microphone that delivers a few unique qualities in order to meet the demands of today's broadcast audio engineers and boom operators. The microphone features radio-frequency (RF) interference properties that avoid annoying noise and interference caused by nearby RF sources such as radio antennas, WIFI networks, internet devices, power lines, etc. The microphone is also built to withstand the rigors of adverse weather conditions. Of course special attention is paid to the accurate, directional pickup characteristics and its frequency response, sensitivity and low noise floor, which result in pristine audio quality. The NTG-3 shotgun microphone is an ideal solution for outdoor ENG and studio applications. RF Rejection The microphone features radio-frequency (RF) interference properties that avoid annoying noise and interference caused by nearby RF sources such as radio antennas, WIFI networks, internet devices, power lines, etc. Withstands Adverse Conditions The microphone is constructed to withstand adverse weather conditions for more stable use outdoors. Supercardioid Line+Gradient Pickup The supercardioid, shotgun characteristics provide excellent off-axis rejection, focused pickup and longer range. Specifications Transducer Condenser Polar Pattern Line-Gradient Supercardioid Frequency Response 40Hz to 20kHz Dynamic Range (Typical) 117dB Signal-to-Noise Ratio 81dB SPL (A-weighted) Maximum Input Sound Level 130dB Power Requirements 48V Phantom Power Output Impedance Nominal: 25 ohms Output Connectors 3-pin XLR Pad No Low Frequency Roll-Off No Dimensions (LxDiameter) 10 x 0.74" (255 x 19mm) Weight 5.74oz (163g) In the Box Water Resistant Aluminum Storage Case Windshield Zip Pouch Microphone Clip 10 Year Warranty

The Rode M5 Compact 1/2" Condenser Microphone matched pair have variation of no more than 1dB of sensitivity between microphones. The M5 itself is a pencil-style mic that features a 1/2" diameter gold-plated membrane capsule with a cardioid polar pattern. The mics have transformerless circuitry for low noise operation and can be used in typical live and studio applications for small diaphragm condenser mics, including on acoustic instruments, choirs, as drum overheads, and more. The M5s are finished with Rode's proprietary ceramic coating and each include a WS5 windshield and RM5 mic clip. The pair was designed and built in Australia and has a limited 1-year warranty that extends to 10-years with on-line registration. Acoustic Principle - Pressure Gradient Active Electronics - JFET impedance converter with bi-polar output buffer Capsule Diameter - 0.50" (12.7 mm) Polar Pattern - Cardioid Address Type - End Frequency Range 20 Hz to 20 kHz Output Impedance 200 ? Maximum SPL 140 dB SPL (@ 1 kHz, 1% THD into 1 k? load) Maximum Output Level 13.5 dBu (@ 1 kHz, 1% THD into 1 k? load) Sensitivity -34.0 dB re 1 V/Pa (10.46 mV @ 94 dB SPL) /- 2 dB @ 1 kHz Equivalent Noise Level 19 dB-A (A-weighted) Phantom Power 24, 48 V Output 3-pin XLR Dimensions (HxWxD) 4 x 1 x 1" (100 x 20 x 20 mm), per microphone Weight 2.8 oz (80 g), per microphone

The Classic II is RØDE's top-of-the-line studio condenser microphone. Classic by name and classic by nature. Featuring a custom spec 1" dual diaphragm capsule feeding a vintage twin triode (New old stock) GE JAN-6072 valve and custom Jensen output transformer. The result? Classic warmth and richness on both vocals and acoustic instruments. Nine polar patterns, variable PAD and filter. Shock mount. Machined from solid brass, the body is hand-polished, glass bead-blasted and coated in satin nickel. Also included is a double-shielded oxygen-free 30' copper cable with heavy-duty plugs and sockets, power supply, a suspension shock mount, stand mount, thread adaptor and sturdy aluminium flight case.

Stylish and modern, the M3 represents RODE's outstanding microphone technology and their continuation of bang-for-the-buck thinking. Built for studio, stage, and location work, the M3 is made from only the finest components, and delivers the sonic results demanded by engineers and musicians alike - and at a price that makes the M3 attainable by anyone. A permanently polarized condenser microphone, the M3 can be powered via its internal battery or by external phantom power. Its low self-noise, high fidelity performance, and value pricing make the M3 hard to beat. Features: Acoustic principle: Permanently polarized condenser Directional pattern: Cardioid Frequency range: 40Hz-20kHz Output impedance: 200 ohms Signal noise ratio: 73dB SPL (per IEC651) Equivalent noise: 21dbA SPL (a - weighted per IEC651) Maximum SPL: 142dB (@ 1kHz, 1% THD into 1kohm load) Sensitivity: -40dB+/-3dB re 1V/Pa @ 1kHz (6.3mV/Pa @ 94db SPL) Dynamic range din iec 651: 121dB (per IEC651) Power supply voltage: 1.6mA (battery)/6.5mA (48V Phantom Power) Battery life: >200 hours Output connection: 3 pin XLR Complete with windshield and a stand mount

The Rode NT55 builds on the success of the NT5, providing an excellent mic for practically any recording application. The NT55 utilizes the 1/2" externally biased gold sputtered true condenser transducer used in the NT5. The NT55 is a state-of-the-art low noise balanced output microphone, exhibiting a wide dynamic range and full frequency response. The NT55 comes with 2 different condenser microphone heads to provide a variety of polar patterns. The NT55 is complemented with a diverse range of accessories to better facilitate positioning. Features: Small-diaphragm Condenser Cardioid and Omnidirectional Capsules 3-position Pad 3-position highpass Filter For Stage or Studio

Estimated delivery time: working days (Imported from the UK) - T&C's Apply Please note that all Christmas gift orders need to be placed before the 14th of November to ensure that they are delivered to you in time. This item includes free delivery within South Africa. Instruction Manual (Acrobat pdf file) Spec sheet (Acrobat pdf file)Studio and location Multi Powered Condenser Microphone The M3 is an extremely versatile microphone that is at home in the studio on location or wherever a low-noise wide-response cardioid condenser microphone is demanded.An end address condenser microphone the M3 features a heavy-duty metal body category leading low self-noise three stage PAD (O -10db -20db) a battery status lED and a High Pass Filter.The M3 also comes complete with windshield and a stand mount and can be powered via a 9V battery or V Phantom. Rugged metal body Internal capsule shock mount Switchable High-Pass Filter @ 80Hz-12dB/Oct Three step PAD - Flat -10dB and -20dB low handling noise Heat treated high strength head mesh 9V battery power or V phantom power Battery status indicator SpecificationPower PV) PV) phantom supply or 9V battery Acoustic Principle Pressure gradient Directional Pattern Cardioid Frequency range 40 Hz - 20 kHz Output impedance 200Ohm Signal noise ratio 73 dB SPl (A - weighted per IEC651) Equivalent noise 21 dB SPl (A - weighted per IEC651) Maximum SPl 142dB SPl (@ 1kHz 1% THD into 1KOhm load) Maximum output voltage +9.22dBu (@ 1kHz 1% THD into 1KOhm load) Sensitivity -40 dB re 1 Volt/Pascal (10 mV @ 94 dB SPl) +/- 3 dB @ 1kHz Weight 390gm Dimensions 225mmH x 33mmW x 33mmD Included Accessories Carry case RM3 stand mount and WSM3 wind shield Optional Accessories DS1 desk stand and Tripod

The PSA1 is a studio boom arm for radio, broadcast, studio and home use. The PSA1 offers a horizontal reach of 820mm, a vertical reach of 840mm and full 360 degree rotation. It is supplied with velcro cable wraps and both desk-clamp and desk-insert style attachments for versatile mounting in desks up to 55mm thick (clamp) or 70mm (insert). Designed for the RDE Procaster and Podcaster, the PSA1 supports most microphones weighing between 700g (1.5lb) and 1.1kg (2.4lb) when combined with shock mount. Please note that the PSM1 shock mount is sold separately.