Rode ntg battery

Rode NTG-3, 2 condenser directional microphone + keep drum MS055 tabletop tripod Maximum maximum sound pressure level 131dB Frequency range 20 - 20000 Hz Power supply or 1.5 V battery or phantom power + keep drum MS055 tabletop tripod Rode NTG 2 condenser Directional Microphone + Keep drum MS055 tabletop tripod The NTG-3, 2 condenser Directional Microphone from Rode offers a super cardioid polar pattern with excellent direction. With a low equivalent noise level of only 18 dB and a maximum maximum sound pressure level of 131dB is the highest sound quality. For the operation of the NTG2 is a phantom power or 1.5 V battery to protect the microphone with power. Technical details: - Polar Pattern: Super Cardioid - Maximum sound pressure: 131 dB - equivalent noise level: 18 dBA - Frequency range: 20 Hz 20 kHz - Sensitivity: 15 mV/Pa - Dynamic Range: 113 dB - Output Impedance: 250 Ohm - Power Supply: 48 volt (Phantom Power) or 1.5 V battery (AA), Weight: 161 g including battery + Keep drum MS055 tripod table stand 'The Keep drum MS055 tripod stand is an extendable table tripod in three legged design is manufactured from metal. In the height on this dummy is the MS055 15 - 20 cm - Extendable and has a 5/8 thread (no thread reducer included). The rubber stand legs combined Natoin with a weight of 250 g for a secure footing. Details: - Tripod - Heavy Duty Construction - can be extended from 15 - 20 cm - Rubberised legs ' - 5/8 thread - Chrome Finish - Weight: 250 g

Rode NTG-2+Dead cat Used once, prefer the NTG-1 because the NTG-2 is too long for my video camera. 100% perfect condition, Box, and Dead cat + short XLR cable

The Rode NTG-2 is a great long condenser shotgun mic, perfect for professional use in video production. It's rugged metal construction and low handling noise make it ideal for video professionals. Quick Facts: broadcast sound quality low noise circuitry condenser transducer two step high pass filter (Flat/80Hz) P48 phantom power OR AA battery option includes mic clip, wind shield and zip case connects via XLR For more information, see it on the Rode website here

The Rode NTG-3 is a professional, precision long condenser shotgun microphone that is designed for sound wherever high-res broadcast audio is required. This mic offers 50% less self-noise than most other shotgun mics. Quick Facts: Superior broadcast sound quality high sensitivity designed to withstand adverse environmental conditions includes aluminium storage cylander, pop filter, mic clip and zip pouch connects via XLR For more information, see it on the Rode website here

The Rode NTG-1 is a fantastic condenser shotgun mic, perfect for professional use in film and TV. It's broadcast sound quality and low noise circuitry make it ideal for production industries. Quick Facts: supercardoid polar pattern condenser transducer two step high pass filter (Flat/80Hz) Low handling noise includes mic clip, wind shield and zip case connects via XLR For more information, see it on the Rode website here

The Rode NTG-8 is a broadcast quality FR-bias shotgun mic. It has increased directionality across a wide frequency response range, making it the ideal mic for film, tv and outdoor broadcasting. Quick Facts: Superior broadcast sound quality high sensitivity supercardoit polar pattern designed to withstand environmental conditions very low handling noise includes aluminum cylinder, MS8 shock mount and wind shield For more information, see it on the Rode website here

The Rode NTG-2 is a condenser shotgun microphone designed for professional audio capturing in the field or indoors. With a history of manufacturing quality studio microphones, Rode has implemented low noise output electronics and wide bandwidth, both of which attribute to the NTG-2's broadcast sound quality. The super-cardioid polar pattern and line plus gradient acoustic principle effectively minimize audio and noise at the off-axis (sides) of the microphone, while the front of the capsule accurately reproduces incoming audio signal. The result is greater intelligibility and signal-to-noise ratio when using the NTG-2 in noisy environments. The NTG-2 is powered with an internal 1.5V AA size battery or an external 48 Volt phantom power source. The output is a standard 3-pin XLR male connector. The microphone features a rugged, all metal, lightweight enclosure that is ideal for camera mounting yet durable enough to withstand the rigors of heavy road use. The Rode NTG-2 is packaged with a microphone stand mount and windscreen. Battery Or Phantom Powered The Rode NTG-2 can be powered with an internal 1.5V AA battery or external 48V phantom power source. Super-Cardioid Polar Pattern The super-cardioid polar pattern and line gradient acoustic principle allow for a narrow pick up pattern at the front of the capsule while minimizing noise at the off-axis sections. Lightweight Durable Construction The NTG-2 features a lightweight metal housing that is ideal for camera mounting. Low Handling Noise Low noise output electronics provide high signal-to-noise ratio. The NTG-2 is designed to also reduce noise caused by handling, rigid mounting hardware, loose cabling etc. Specifications Transducer Condenser Polar Pattern Supercardioid Frequency Response 20Hz to 20kHz Sensitivity -36.0dB re 1 Volt/Pascal (15.00mV @ 94 dB SPL) /- 2 dB @ 1kHz Signal-to-Noise Ratio 76dB (1kHz rel, 1Pa; per IEC651, IEC268-15) Maximum Input Sound Level 131dB SPL (@ 1kHz, 1% THD into 1K? load) Power Requirements 48V phantom, 44V to 52V Output Impedance 250? Output Connectors 3-pin XLR balanced Pad No Low Frequency Roll-Off Selectable HPF @ 80Hz/12dB octave Dimensions 10.94 x.87" (278 x 22mm) (Length x Diameter) Weight 5 oz (161g) Shipping Info Shipping Weight 1.1 lb Box Dimensions (WxHxD) 5.984 x 2.126 x 13.307 In the Box 10 Year Warranty Microphone Stand Mount Windscreen Zippered Pouch

Never been used, only opened to test it. I have a shock mount for it a dead cat and a xlr cable as extras. All in perfect con. All together costed R new from Orms. Sms - Or email. Thanks,

Rode NTG2 Multi-Powered Shotgun Microphone The RØDE NTG2 is a lightweight condenser shotgun microphone, designed for professional applications within the film, video, television and production industries. Its full frequency response, low noise and audio transparency make it an ideal film, video, and voice over microphone, while its low weight (161gm/5.7oz without battery) makes it an ideal boom microphone. In addition to the native 20Hz-20kHz frequency response a selectable high-pass filter at 80Hz is available, which will prevent low end noise such as air conditioners and traffic from being recorded. The NTG2 operates either from a AA (1.5V) battery or P48 phantom power which can be supplied by professional cameras, audio recorders and power supplies. The battery power option makes the NTG2 ideal for scenarios where the camera does not supply phantom power such as DSLR video. The WSVM windshield is supplied to minimise light wind noise and plosives during recording. The optional ‘DeadCat’ furry is recommended for outdoor applications.

Rode - M3 Dual Power Condenser Microphone The M3 is an extremely versatile microphone that is at home in the studio, on location, or wherever a low-noise wide-response cardioid condenser microphone is demanded. An end address condenser microphone, the M3 features a heavy-duty metal body, category leading low self-noise, three stage PAD (O, -10db, -20db), a battery status LED and a High Pass Filter. The M3 also comes complete with windshield and a stand mount, and can be powered via a 9V battery or V Phantom.

Rode - M3 Dual Power Condenser Microphone The M3 is an extremely versatile microphone that is at home in the studio, on location, or wherever a low-noise wide-response cardioid condenser microphone is demanded. An end address condenser microphone, the M3 features a heavy-duty metal body, category leading low self-noise, three stage PAD (O, -10db, -20db), a battery status LED and a High Pass Filter. The M3 also comes complete with windshield and a stand mount, and can be powered via a 9V battery or 24-48V Phantom.

Rode - NT3 Condenser Microphone Stylish and modern, the nickel-body NT3 represents RODE's outstanding microphone technology. Built for studio, stage, and location work, the NT3 is made from only the finest components, and delivers the sonic results demanded by engineers and musicians alike. A true condenser microphone, the NT3 can be powered via its internal battery or by external phantom power. Its low self-noise, high fidelity performance, and value pricing makes it hard to beat.

Rode VMPRPLUS Videomic Pro-R+ On-Camera Shotgun Condenser Microphone Product Description The RØDE VideoMic Pro+ is a new addition to the best-in-market on-camera category. It is a true shotgun microphone designed for use with camcorders, DSLR cameras and portable audio recorders as a source of primary and reference audio. Binding: Electronics Brand: Rode ProductGroup: Musical Instruments ProductTypeName: SOUND_AND_RECORDING_EQUIPMENT Features: Automatic Power Function with plug-in power Power via LB-1, 2 x AA Batteries, Micro USB Ships with LB-1 Lithium-Ion Rechargeable Battery, Detachable 3.5mm TRS Cable, Micro USB Cable Optimized Windshield Shape Digital Switching. Camera shoe mount with 3/8 Inch thread for easy boompole mounting

   Rode VideoMic Me Directional Microphone for Smart Phones             Features Compact TRRS cardioid microphone designed for iOS devices and smartphones;Frequency Range100Hz - 20kHz High-quality directional microphone that connects directly to the iPhone TRRS microphone/headphone socket 3.5mm headphone output. Weight: 34gm; Dimensions: 38mmH x 21mmW x 80mmD Except for Iphone 7. Equivalent Noise Level (A-weighted) - 20dB-A.Ultra lightweight (85g/3oz). Please refer the Quick Start Guide before use. 9 V battery operation                      

Heavy duty metal body Internal capsule shock mount High level of RF rejection On-mic selectable high pass filter at 80Hz-12dB/Oct (-10 and -20dB PAD) Heat-treated high-strength mesh head Battery status indicator 9V Battery Power, 24 or 48V Phantom Power Includes wind shield, mic clip and zip pouch 10 year extended warranty when you register your microphone The RØDE M3 is a highly versatile end-address condenser microphone, designed to be completely at home in the studio, on stage or on location. It is equally suitable as an instrument microphone for guitars, drums and percussion or even vocals. Featuring a heavy duty metal body and internally shock mounted 1/2" condenser capsule mounted for end-address, the M3 can be powered either via P48 phantom power, or an internal 9V battery. A -10dB and -20dB level attenuator (pad), selectable from inside the battery compartment, allows recording of loud sound sources, such as a guitar amplifier or snare drum. A high-pass filter selectable on the microphone power switch introduces a filter at 80Hz to reduce low frequency sounds and handling noise. The RØDE M3 microphone is designed and made in Australia, and covered by RØDE Microphones' industry leading 10 year warranty. Please confirm stock availability before purchasing We are an authorized dealer of the best sound, dj equipment, studio equipment and lighting Free delivery anywhere in the country on orders over a R1000 Delivery 24-48 hours to all major cities 48-72 hours to outlying areas Warranty Type: Authorized Dealer 12 Months Warranty. All goods are subject to supplier discretion Replacement Guarantee: 30 Days: All goods are subject to supplier discretion Our Shop Shop F2 Second Level The Conservatory at Lakefield 106 Lakefield Avenue Lakefield Square Benoni Contact us at 110 - show phone - Tian - 718 - show phone - /Whatsapp Carlo - 844 - show phone - /Whatsapp Trading Hours: Monday - Friday 9:00am - 17:00pm Saturday 9:00am - 15:00pm If you can't find what you are looking for give us a call and we will gladly assist you