Rode long shotgun microphone

The silver Rode NTG-3 Shotgun Microphone is a professional shotgun microphone that delivers a few unique qualities in order to meet the demands of today's broadcast audio engineers and boom operators. The microphone features radio-frequency (RF) interference properties that avoid annoying noise and interference caused by nearby RF sources such as radio antennas, WIFI networks, internet devices, power lines, etc. The microphone is also built to withstand the rigors of adverse weather conditions. Of course special attention is paid to the accurate, directional pickup characteristics and its frequency response, sensitivity and low noise floor, which result in pristine audio quality. The NTG-3 shotgun microphone is an ideal solution for outdoor ENG and studio applications. RF Rejection The microphone features radio-frequency (RF) interference properties that avoid annoying noise and interference caused by nearby RF sources such as radio antennas, WIFI networks, internet devices, power lines, etc. Withstands Adverse Conditions The microphone is constructed to withstand adverse weather conditions for more stable use outdoors. Supercardioid Line+Gradient Pickup The supercardioid, shotgun characteristics provide excellent off-axis rejection, focused pickup and longer range. Specifications Transducer Condenser Polar Pattern Line-Gradient Supercardioid Frequency Response 40Hz to 20kHz Dynamic Range (Typical) 117dB Signal-to-Noise Ratio 81dB SPL (A-weighted) Maximum Input Sound Level 130dB Power Requirements 48V Phantom Power Output Impedance Nominal: 25 ohms Output Connectors 3-pin XLR Pad No Low Frequency Roll-Off No Dimensions (LxDiameter) 10 x 0.74" (255 x 19mm) Weight 5.74oz (163g) In the Box Water Resistant Aluminum Storage Case Windshield Zip Pouch Microphone Clip 10 Year Warranty

Buy Rode Videomic Shotgun Microphone (cable not included) for R799.00

The Rode NTG-3 is a professional, precision long condenser shotgun microphone that is designed for sound wherever high-res broadcast audio is required. This mic offers 50% less self-noise than most other shotgun mics. Quick Facts: Superior broadcast sound quality high sensitivity designed to withstand adverse environmental conditions includes aluminium storage cylander, pop filter, mic clip and zip pouch connects via XLR For more information, see it on the Rode website here

The Rhode NTG2 is a lightweight condenser shotgun microphone, designed for professional applications within the film, video, television and production industries. Its full frequency response, low noise and audio transparency make it an ideal film, video, and voice over microphone, while its low weight makes it an ideal boom microphone. In addition to the native 20Hz-20kHz frequency response a selectable high-pass filter at 80Hz is available, which will prevent low end noise such as air conditioners and traffic from being recorded.

The Rode NTG-2 is a great long condenser shotgun mic, perfect for professional use in video production. It's rugged metal construction and low handling noise make it ideal for video professionals. Quick Facts: broadcast sound quality low noise circuitry condenser transducer two step high pass filter (Flat/80Hz) P48 phantom power OR AA battery option includes mic clip, wind shield and zip case connects via XLR For more information, see it on the Rode website here

The Rode NTG-8 is a broadcast quality FR-bias shotgun mic. It has increased directionality across a wide frequency response range, making it the ideal mic for film, tv and outdoor broadcasting. Quick Facts: Superior broadcast sound quality high sensitivity supercardoit polar pattern designed to withstand environmental conditions very low handling noise includes aluminum cylinder, MS8 shock mount and wind shield For more information, see it on the Rode website here

Rode NTG3 RF-Bias Shotgun Microphone The RØDE NTG3 super-cardioid shotgun microphone is designed for professional use on film, television, electronic news gathering and wherever high-resolution broadcast audio is required. As RØDE’s premier directional microphone the NTG3 exhibits superlative audio quality with a rich, warm quality and a full frequency response. Its RF bias technology makes it almost completely resistant to moisture, making it the only option when recording in demanding environments where condensation is an issue. Machined from solid brass and available in either anti-glare, nickel-plated finish or matte black (NTG3B), the NTG3 is incredibly robust while remaining light weight. Its precise yet forgiving polar pattern ensures that whether used on-camera or on a boom pole, the NTG3 will capture audio clearly every time. A durable aluminum storage cylinder is supplied to provide the ultimate protection for the NTG3 while in storage and transport. Tightly sealed at both ends the cylinder is highly weatherproof, adding to the microphone’s rugged performance credentials.

Rode NTG2 Multi-Powered Shotgun Microphone The RØDE NTG2 is a lightweight condenser shotgun microphone, designed for professional applications within the film, video, television and production industries. Its full frequency response, low noise and audio transparency make it an ideal film, video, and voice over microphone, while its low weight (161gm/5.7oz without battery) makes it an ideal boom microphone. In addition to the native 20Hz-20kHz frequency response a selectable high-pass filter at 80Hz is available, which will prevent low end noise such as air conditioners and traffic from being recorded. The NTG2 operates either from a AA (1.5V) battery or P48 phantom power which can be supplied by professional cameras, audio recorders and power supplies. The battery power option makes the NTG2 ideal for scenarios where the camera does not supply phantom power such as DSLR video. The WSVM windshield is supplied to minimise light wind noise and plosives during recording. The optional ‘DeadCat’ furry is recommended for outdoor applications.

Rode NTG-2 Condenser Shotgun Microphone. Rode NTG-2 Condenser Shotgun Microphone

The Rode NTG-2 is a condenser shotgun microphone designed for professional audio capturing in the field or indoors. With a history of manufacturing quality studio microphones, Rode has implemented low noise output electronics and wide bandwidth, both of which attribute to the NTG-2's broadcast sound quality. The super-cardioid polar pattern and line plus gradient acoustic principle effectively minimize audio and noise at the off-axis (sides) of the microphone, while the front of the capsule accurately reproduces incoming audio signal. The result is greater intelligibility and signal-to-noise ratio when using the NTG-2 in noisy environments. The NTG-2 is powered with an internal 1.5V AA size battery or an external 48 Volt phantom power source. The output is a standard 3-pin XLR male connector. The microphone features a rugged, all metal, lightweight enclosure that is ideal for camera mounting yet durable enough to withstand the rigors of heavy road use. The Rode NTG-2 is packaged with a microphone stand mount and windscreen. Battery Or Phantom Powered The Rode NTG-2 can be powered with an internal 1.5V AA battery or external 48V phantom power source. Super-Cardioid Polar Pattern The super-cardioid polar pattern and line gradient acoustic principle allow for a narrow pick up pattern at the front of the capsule while minimizing noise at the off-axis sections. Lightweight Durable Construction The NTG-2 features a lightweight metal housing that is ideal for camera mounting. Low Handling Noise Low noise output electronics provide high signal-to-noise ratio. The NTG-2 is designed to also reduce noise caused by handling, rigid mounting hardware, loose cabling etc. Specifications Transducer Condenser Polar Pattern Supercardioid Frequency Response 20Hz to 20kHz Sensitivity -36.0dB re 1 Volt/Pascal (15.00mV @ 94 dB SPL) /- 2 dB @ 1kHz Signal-to-Noise Ratio 76dB (1kHz rel, 1Pa; per IEC651, IEC268-15) Maximum Input Sound Level 131dB SPL (@ 1kHz, 1% THD into 1K? load) Power Requirements 48V phantom, 44V to 52V Output Impedance 250? Output Connectors 3-pin XLR balanced Pad No Low Frequency Roll-Off Selectable HPF @ 80Hz/12dB octave Dimensions 10.94 x.87" (278 x 22mm) (Length x Diameter) Weight 5 oz (161g) Shipping Info Shipping Weight 1.1 lb Box Dimensions (WxHxD) 5.984 x 2.126 x 13.307 In the Box 10 Year Warranty Microphone Stand Mount Windscreen Zippered Pouch

The RDE NTG3 super-cardioid shotgun microphone is designed for professional use on film, television, electronic news gathering and wherever high-resolution broadcast audio is required. As RDE's premier directional microphone the NTG3 exhibits superlative audio quality with a rich, warm quality and a full frequency response. Its RF bias technology makes it almost completely resistant to moisture, making it the only option when recording in demanding environments where condensation is an issue. Machined from solid brass and available in either anti-glare, nickel-plated finish or matte black (NTG3B), the NTG3 is incredibly robust while remaining light weight. Its precise yet forgiving polar pattern ensures that whether used on-camera or on a boom pole, the NTG3 will capture audio clearly every time. A durable aluminum storage cylinder is supplied to provide the ultimate protection for the NTG3 while in storage and transport. Tightly sealed at both ends the cylinder is highly weatherproof, adding to the microphone's rugged performance credentials. The RDE NTG3 shotgun microphone is designed and made in Australia, and covered by RDE Microphones' industry leading 10 year warranty.

The new RODE NTG-1 is a lightweight condenser shotgun microphone, specifically designed for professional applications within the film, video, television, voiceover and ENG industries. The NTG-1 provides an electronically balanced output stage and operates on 48 V to the P48 standard. The NTG-1 offers wide bandwidth and a controlled polar response coupled with low noise SMT electronics. The NTG-1 is extremely lightweight making it ideal for mounting directly to video cameras (with optional accessories) or a Boom pole. The NTG-1 comes complete with mount and windshield. The supplied windscreen effectively suppresses wind noise when recording outdoors in moderate conditions. Optional accessories are available for more demanding applications. Features - Broadcast sound quality - Low noise circuitry - Condenser transducer - Rugged metal construction - Low weight: 105 grams approx. (3 oz.) - Low handling noise - Supplied with stand mount, zip pouch and windshield - Designed & manufactured in Australia

Buy Rode NTG2 Multi-Powered Shotgun Microphone for R5,895.00

Buy Rode VideoMic Pro+ Shotgun Microphone Pro Plus Shure AKG for R3,599.00

Buy Rode VideoMic Pro+ Shotgun Microphone Pro Plus Shure AKG for R3,499.00