Rode micon connector

The RDE MiConTM connector system provides seamless integration between the RDE HS1 headset,PinMic and Lavalier microphones and a wide range of wireless systems. The MICON-2 is designed to connect to a standard 3.5mm stereo minijack, with a power supply of 1V minimum.

The RDE MiConTM connector system provides seamless integration between the RDE HS1 headset,PinMic and Lavalier microphones and a wide range of wireless systems. The MiCon-4 is designed to connect to Audio Technica UniPakTM Body-Pack transmitters 1800, 2000 and 3000. Audio Technica, Uni-Pak and the Audio Technica products listed are registered names and trademarks owned by Audio Technica.

The RDE MiConTM connector system provides seamless integration between the RDE HS1 headset, PinMic and Lavalier microphones and a wide range of wireless systems. The MICON-11 is designed to connect to TRRS devices such as the iPhone, iPad, iPod touch and select Android devices.

The RDE MiConTM connector system provides seamless integration between the RDE HS1 headset,PinMic and Lavalier microphones and a wide range of wireless systems. The MICON-1 is designed to connect to the Sennheiser transmitters SK 500 G3, SK 300 G3, SK 100 G3, SK 500 G2, SK 300 G2, SK 2 Freeport Sennheiser and the Sennheiser products listed are registered names and trademarks owned by Sennheiser.

While lapel microphones are the industry standard for close-miking presenters and talent, their placement on a collar or lapel can be distracting. The Rode PinMic features a detachable capsule head that mounts onto three pins on the microphone backplate, providing a discreet alternative that can be located almost anywhere on a wide range of clothing and fabrics. Features - Intuitive And Subtle: Ultra-discreet appearance - Lightweight and easy to position - Pins through clothing up to approximately 1.5mm (0.006 in.) thick - Removable mesh head - Low noise miniature microphone capsule - Low handling noise, Universal Compatibility - Rode MiCon connector system provides seamless integration with a wide range of wireless systems while maintaining discreet and unobtrusive appearance The included water resistant pop filter and mini-furry for high wind protection ensure quality recordings in adverse environments, while the anti-trauma water resistant case provides rugged and secure protection for the microphone, cables and accessories. Knowing that versatility is paramount in any product, Rode has developed the MiCon connector system which provides seamless integration between all of Rode's compact wearable microphones and a wide range of wireless systems. Visit the MiCon product page for a full list of available adaptors and the supported devices. Rode has always offered industry leading warranty and after sales service on its products, and the PinMic is no exception, offering an innovative five year warranty that gives you total piece of mind for five years after purchase. Full details can be found in the terms and conditions. Included Accessories - Anti-trauma storage case - Water resistant pop filter - Mini-furry - Shielded detachable Kevlar reinforced cable - Lapel style cable management clip - Adjustment tools

Rode - RODHS1-B Headset Microphone You demand clean, clear sound from your wireless headset mic. You also need an ultra-low-profile design that keeps the attention on you, not on your microphone. RODE's fantastic HS1-B delivers! This omnidirectional mic brings you the kind of performance you'd expect from a premium RODE microphone, and its compact size won't distract your audience from what you're saying or singing. The HS1-B gives you three axes of adjustment, so it's always comfortable and always exactly where you need it to be. Its MiCon connector system makes the HS1-B perfect for several RODE systems as well as other wireless systems. You also get all the accessories you need.

The RØDE Lavalier is a discreet lavalier or lapel style microphone that provides simple and intuitive audio in any application. The Lavalier's low self noise, user friendly omni-directional polar pattern and minimal appearance make it an ideal solution for film, television, video, theatre, house of worship and anywhere where a high quality microphone needs to be heard but not seen. The microphone capsule is connected via a 1.2m (4') shielded, detachable Kevlar® reinforced cable that has been rigorously strain tested up to 10kg to ensure reliable performance. The included mini-furry for high wind protection ensures quality recordings in adverse environments, and the included cable management clips ensure that you are able to minimise the microphone and cable visibility, while providing maximum mobility for the wearer. The supplied anti-trauma water resistant case provides rugged and secure protection for the microphone, cable, clips and included accessories. Knowing that versatility is paramount in any product, RØDE has developed the MiCon™ connector system which provides seamless integration between the Lavalier and a wide range of wireless systems as well as consoles, cameras and portable recorders. 1 year limited guarantee For more info on this product please click here

Rode - NT6 Small Diaphragm Condenser Microphone The new Rode NT6 is a small-diaphragm condenser microphone that's specifically designed for difficult mounting applications or discreet placement. The compact capsule of the NT6 is connected to the main part of the mic by a 3-meter Kevlar-reinforced cable. The NT6 runs on standard 48-volt phantom power. The mic has a fixed cardioid pattern, a frequency range of 40Hz-20kHz and a maximum SPL figure of 135dB. The new NT6 is extremely well suited to any situation where a small unobtrusive but powerful microphone system is required. It features a unique compact capsule connected to the main body of the mic by a three-meter cable, making it perfect for discrete instrument miking, especially in tight spaces. The NT6's mic body, which houses the preamp and XLR connector, also features -10dB pad and 80Hz highpass filter switches, so you can adjust these settings without disturbing the position of the capsule. The NT6 is supplied with all the necessary mounting hardware, a windshield and a zip-up pouch

The CLIP1 is a cable management clip, designed to allow optimal mounting of MiCon cables on the microphone user. Supplied in a pack of three.

The Rode NTG-2 is a condenser shotgun microphone designed for professional audio capturing in the field or indoors. With a history of manufacturing quality studio microphones, Rode has implemented low noise output electronics and wide bandwidth, both of which attribute to the NTG-2's broadcast sound quality. The super-cardioid polar pattern and line plus gradient acoustic principle effectively minimize audio and noise at the off-axis (sides) of the microphone, while the front of the capsule accurately reproduces incoming audio signal. The result is greater intelligibility and signal-to-noise ratio when using the NTG-2 in noisy environments. The NTG-2 is powered with an internal 1.5V AA size battery or an external 48 Volt phantom power source. The output is a standard 3-pin XLR male connector. The microphone features a rugged, all metal, lightweight enclosure that is ideal for camera mounting yet durable enough to withstand the rigors of heavy road use. The Rode NTG-2 is packaged with a microphone stand mount and windscreen. Battery Or Phantom Powered The Rode NTG-2 can be powered with an internal 1.5V AA battery or external 48V phantom power source. Super-Cardioid Polar Pattern The super-cardioid polar pattern and line gradient acoustic principle allow for a narrow pick up pattern at the front of the capsule while minimizing noise at the off-axis sections. Lightweight Durable Construction The NTG-2 features a lightweight metal housing that is ideal for camera mounting. Low Handling Noise Low noise output electronics provide high signal-to-noise ratio. The NTG-2 is designed to also reduce noise caused by handling, rigid mounting hardware, loose cabling etc. Specifications Transducer Condenser Polar Pattern Supercardioid Frequency Response 20Hz to 20kHz Sensitivity -36.0dB re 1 Volt/Pascal (15.00mV @ 94 dB SPL) /- 2 dB @ 1kHz Signal-to-Noise Ratio 76dB (1kHz rel, 1Pa; per IEC651, IEC268-15) Maximum Input Sound Level 131dB SPL (@ 1kHz, 1% THD into 1K? load) Power Requirements 48V phantom, 44V to 52V Output Impedance 250? Output Connectors 3-pin XLR balanced Pad No Low Frequency Roll-Off Selectable HPF @ 80Hz/12dB octave Dimensions 10.94 x.87" (278 x 22mm) (Length x Diameter) Weight 5 oz (161g) Shipping Info Shipping Weight 1.1 lb Box Dimensions (WxHxD) 5.984 x 2.126 x 13.307 In the Box 10 Year Warranty Microphone Stand Mount Windscreen Zippered Pouch