N4 electrical

Salary: Market Related Position Closes: 28th October Electrical Foreman is required at FMCG manufacturing plant in Johannesburg South Requirements: - HT experience and being an installation electrician - HT switching and maintenance experience - LT MCC experience - Qualified electrician from Olifantsfontein - N4 Electrical Engineering Minimum - Wireman’s license / Master Electrician advantage - 3 years' experience in supervisory position Experience: - Motor maintenance - AC / DC Drives - PLC experience (Programming) - 3 years' experience in Electrical Technician position - SAP - Boilers - Packing experience - milling / baking experience Candidates without the above required qualifications will unfortunately not be considered for the position. Should you meet the requirements for this position, please email your CV to or fax to . You can also contact Jessica/Chanel on .  Correspondence will only be conducted with short listed candidates. Should you not hear from us within 3 days, please consider your application unsuccessful.

Job Position: Electrical Technician Ref: 3574 Location: East London Salary: Commensurate with experience and qualification + company vehicle + benefits Qualifications / Requirements • Qualified Electrician / Fitter or Millwright • Minimum of 3 years working experience and a stable work record • Minimum of N4 Technical certificate • Good work ethics and integrity • Excellent communication skills • Must have a valid drivers license Key Performance Areas: • Install and provide operating training • Prepare and discuss quotations • Diagnose faults and carry out repairs • Carry out maintenance Responsibility: Qualifications / Requirements • Qualified Electrician / Fitter or Millwright • Minimum of 3 years working experience and a stable work record • Minimum of N4 Technical certificate • Good work ethics and integrity • Excellent communication skills • Must have a valid drivers license Key Performance Areas: • Install and provide operating training • Prepare and discuss quotations • Diagnose faults and carry out repairs • Carry out maintenance Job Reference #: Electrical Technician

Job Position: Electrical Technician Ref: 3574 Location: East London Salary: Commensurate with experience and qualification + company vehicle + benefits Qualifications / Requirements Qualified Electrician / Fitter or Millwright Minimum of 3 years working experience and a stable work record Minimum of N4 Technical certificate Good work ethics and integrity Excellent communication skills Must have a valid drivers license Key Performance Areas: Install and provide operating training Prepare and discuss quotations Diagnose faults and carry out repairs Carry out maintenance Responsibility: Salary: Commensurate with experience and qualification + company vehicle + benefits Qualifications / Requirements Qualified Electrician / Fitter or Millwright Minimum of 3 years working experience and a stable work record Minimum of N4 Technical certificate Good work ethics and integrity Excellent communication skills Must have a valid drivers license Key Performance Areas: Install and provide operating training Prepare and discuss quotations Diagnose faults and carry out repairs Carry out maintenance Job Reference #: Electrical Technician

Quality Control Inspector - Electrical MINIMUM REQUIREMENTS: • Must have completed a recognised electrical trade test • N4 • Eskom experience preferable  DESIRED REQUIREMENTS: • An active quality control inspector • Required to be a radiation worker • Wireman’s Licence SPECIFIC COMPETENCIES REQUIREMENTS: • Must have worked as a fitter for 4 years in a Maintenance/Production environment • Must have qualified control and assurance experience • Relative experience on contractors, breakers, electrical boards and motors PLEASE SUBMIT A COMPREHENSIVE CV, CERTIFIED COPIES OF YOUR ID AND QUALIFICATIONS AND CONTACT DETAILS OF THREE REFERENCES. EMAIL: SUBJECTLINE: Quality Control Inspector – Electrical

ARINT SA is seeking qualified, dynamic and energetic individuals for the position below: JOB CATEGORY: ·         Quality Control Inspector (Electrical)   Minimum Requirements: ·         Must have completed a recognised electrical trade test ·         N4   Desired Requirements: ·         An active quality control inspector ·         Required to be a radiation worker ·         Wireman’s licence   Specific Competencies required: ·         Must have worker as a fitter for ± 4 years in a Maintenance / Production environment. ·         Must have quality control and assurance experience. ·         Relative experience on contactors, breakers, electrical boards and motors. Qualifying candidates to please forward 2 page cv in order of colour photo, personal details, relevant experience specific for the position applied to,     email: NOTE: -CV IN ANY OTHER FORMAT WILL NOT BE CONSIDERED -ONLY SHORTLISTED CANDIDATES WILL BE CONTACTED. -CLOSING DATE IS 15H OCTOBER -NO LATE APPLICATIONS WILL BE CONSIDERED.

We are looking for a Technician with sufficient experience in Power Electronics fault finding and repair, to be based in Montague Gardens, Cape Town. Must be willing and able to travel when needed - car licence needed. •Minimum a National Certificate N4 Electrical or Electronic Engineering (N5 is preferred). • At least two years' experience with fault finding and repair of Power Electronic equipment. • Must have a very good technical knowledge base with Variable Speed Drives and associated equipment. • Experience with LV Electrical Motors and Switchgear is a great advantage. • Must be fully fluent in Afrikaans and English (Professional proficiency). • Must have a valid driver's licence and be able to travel as and when needed. • Must be willing and able to work overtime as needed, even on weekends. • No criminal record. • Ability to liaise with clients. • Be well spoken and able to represent the organisation in a professional and tactful manner. • Be energetic with good interpersonal skills. • Must be able to work in a team, or to act independently when situations warrant. • Must be able to act diplomatically when a situation demands it. • Must have a deep sense of responsibility and accountability with sober habits. • Must be punctual and willing to go the extra mile without it being asked for. Please ensure you comply with the minimum requirements before applying. This is a great opportunity with a well known company. Benefits will include at least a company vehicle to use for work and pension. To apply please send a full CV to and please have a copy of your qualifications and ID ready should it be requested. Please accept that should you not hear back from our offices within 10 working days that your application was unsuccessful.

Location  :  Johannesburg South  Salary      :  RK pm A manufacturing company based in Johannesburg South is seeking an electrician to join their team.  Requirements: - Trade Tested Electrical - Wireman's / master electrician - N4 Electrical Engineering - 5 years’ experience in Heavy manufacturing maintenance environment - 5 years' experience in steel processing, steel welding, automotive experience - PLC Siemens, Omrom, Mitsubishi / Moeller experience - AC / DC motor drive experience - Instrumentation and control systems experience essential - Physically fit and able to cope under pressure - Able to work shifts - Mechanical experience a must - SAP experience Closing date: 17th October Candidates without the above required qualifications will unfortunately not be considered for the position. Should you meet the requirements for this position, please email your CV to or fax to . You can also contact Jessica/Chanel on .  Correspondence will only be conducted with short listed candidates. Should you not hear from us within 3 days, please consider your application unsuccessful.  

Industrial Field TechnicianJob Position: Industrial Field TechnicianLocation: Port ElizabethSalary: Commensurate with experience and qualificationEmail your updated CV to recruit@onlinepersonnel.co.zaQualifications / Requirements:• Qualified Electrician/Fitter/Millwright• Minimum of 3 years working experience in a similar environment• Matric Certificate• Minimum of an N4 Technical certificate• Must be fast learner and must be able to work both independently and within a team environment• Good verbal and written communication skills• Valid driver’s licenseExperience and knowledge:• Secure the equipment/machinery to the floor – in some cases concrete work is required• Connect the machine electrically to – 230 Volt and 400 Volt. (Mostly 400V)• Connect the machine to the water supply – basic plumbing required• Connect the machine to the main drain system – basic plumbing required• Connect the machine to air ventilation system or to provide an exhaust solution• Program and setting of machines according to customers’ needs and provide training on the operation and maintenance of the machine• Complete all relevant paperwork i.e. invoice and job sheets• Identify electrical/electronic faults through a process of fault finding• Replace faulty electrical/electronic components/parts once the problem/s has been identified• Quote on repairs i.e. labour and parts involved or required to repair equipment/machinery• Identify when bearings need replacement (Mechanical requirement)• Replace bearings when needed• Repair gas and steam heated equipmentResponsibility:Email your updated CV to recruit@onlinepersonnel.co.zaQualifications / Requirements:• Qualified Electrician/Fitter/Millwright• Minimum of 3 years working experience in a similar environment• Matric Certificate• Minimum of an N4 Technical certificate• Must be fast learner and must be able to work both independently and within a team environment• Good verbal and written communication skills• Valid driver’s licenseExperience and knowledge:• Secure the equipment/machinery to the floor – in some cases concrete work is required• Connect the machine electrically to – 230 Volt and 400 Volt. (Mostly 400V)• Connect the machine to the water supply – basic plumbing required• Connect the machine to the main drain system – basic plumbing required• Connect the machine to air ventilation system or to provide an exhaust solution• Program and setting of machines according to customers’ needs and provide training on the operation and maintenance of the machine• Complete all relevant paperwork i.e. invoice and job sheets• Identify electrical/electronic faults through a process of fault finding• Replace faulty electrical/electronic components/parts once the problem/s has been identified• Quote on repairs i.e. labour and parts involved or required to repair equipment/machinery• Identify when bearings need replacement (Mechanical requirement)• Replace bearings when needed• Repair gas and steam heated equipmentJob Reference #:

Location: Johannesburg East Millwright for FMCG Manufacturing Company in Johannesburg East Minimum Requirements: - Trade Test Millwright - Minimum 3 years post trade experience - Minimum 3 years’ experience in bakery and milling / FMCG manufacturing experience - Minimum N4 in mechanical / electrical Engineering - Must have own reliable Transport and valid Drivers' license.  - Knowledge of PLC control systems would be an advantage. Specific Outputs: •Electrical and Mechanical maintenance •Preventative maintenance •Attending to breakdowns •Fault-finding •Dismantle, move, assemble, install and align equipment and machinery •Constructed foundation for machines •Repaired and lubricated machinery and equipment •Repaired basic electrical circuitry and components and tested units to evaluate electrical & mechanical operation • Set programmable logical circuits (PLC's) SA Citizens only Salary: Market Related Candidates without the above required qualifications will unfortunately not be considered for the position. Should you meet the requirements for this position, please email your CV to or fax to . You can also contact Jessica/Chanel on   Correspondence will only be conducted with short listed candidates. Should you not hear from us within 3 days, please consider your application unsuccessful.  

Dairy manufacturing plant in Johannesburg is seeking an experience Millwright. Requirements: - Trade tested millwright - Minimum N4 - 3 years' experience post Trade Test - 3 years fast moving consumable goods (FMCG) experience - Diary experience an advantage Duties: - Electrical and Mechanical maintenance - Preventative maintenance - Attending to breakdowns - Fault-finding - Dismantle, move, assemble, install and align equipment and machinery - Constructed foundation for machines - Repaired and lubricated machinery and equipment - Repaired basic electrical circuitry and components and tested units to evaluate electrical & mechanical operation - Set programmable logical circuits (PLC's) - experience with boilers, VSD's, pnuematics and hydraulics - high speed packaging experience Salary: Market Related Closing date: Monday 27th October Candidates without the above required qualifications will unfortunately not be considered for the position. Should you meet the requirements for this position, please email your CV to or fax to . You can also contact Jessica/Chanel on Correspondence will only be conducted with short listed candidates. Should you not hear from us within 3 days, please consider your application unsuccessful.

Salary: R per month + benefits  Requirements: * Trade Tested Electrical or Mechanical Engineer (will also consider qualified Millwright) * Matric or N4 mechanical/electrical diploma * Experience with pneumatics and hydraulics * Experience with 5S and Lean Manufacturing * Must have experience in Automotive industry * First Aid / Health & Safety training * Must have valid driver’s licence * Fork lift licence – advantageous * Must be highly computer literate * NB: must be willing to work mostly after-hours / nightshift  Please note: if you are not contacted within two weeks, consider your application unsuccessful

Millwright Client based in the Paarl Area is seeking a Qualified Millwright to join thein International Manufacturing Company. Requirements: • Grade 12 • N4 Technical Qualification and Millwright Trade Certificate • 5+ years in a Steel Maintenance Role in a manufacturing environment • PLC Experience will be an advantage • Strong experience on Compressors, Water treatment plants & Air handling units • Strong Electrical experience • Good planning & Organizing Skills • Good Decision & Communication Skills • Strong Fault Finding & Trouble shooting Skills • Experience on Heat Welding Equipment will be an advantage • Must be prepared to work shifts & respond to call outs • Good interactive & people Skills • Strong analytical & Technical Innovative skills • Strong Time Management skills Duties: • Ensure availability of spares through adherence to inventory management procedures, timely planning of activities and continuous condition monitoring. • Must be able to read blueprints and schematic drawings to determine work procedures, to construct foundations for and to assemble, dismantle and overhaul machinery and equipment, using hand and power tools. • Ensure that associates and non-associates are trained and competent with the good operating practices of equipment. • Pre-plan and execute all maintenance activities according to preventative maintenance strategy. • Ensure integrity of safety equipment and compliance with safety procedures at all times in areas of responsibility. • Accurate and timely troubleshooting skills in all aspects of mechanical equipment including but not limited to hydraulics, pneumatics, PLC logics and electrical circuits. • Must be able to assist with engineering projects, manage small maintenance projects and be able to lead a project where necessary. Ability to engineer small projects in fields of maintenance. • Comprehensive Knowledge of Operation & Flow of processing or packaging. • Be able to communicate outstanding or re-occurring issues to all (operations, maintenance, etc.) • Seek out Optimization opportunities for increase production tonnages. • Responsible to communicate & elevate any Quality & Safety concerns to management. Salary: Please indicate what salary bracket you are seeking when applying for this position. sam@personastaff.co.za 086 776 4865 NB: If you have not been contacted with regards to your application for this position within 48 working hours, your application has been unsuccessful Job Reference #: SC - MW Consultant Name: Samantha Cremore

Job Opportunity Assistant Technician – Wind Location: TBA Job Type: Fixed term contract Reports: Contracts Manager Sector: Renewable Energy Job Description We currently have an exciting opportunity available for a Technician. The Technician is responsible to carry out maintenance and operations at the plant. This may include identifying and implementing plant optimisation projects. Minimum Requirements Qualification - Minimum N4 Certificate or equivalent. - Red Seal qualification or N6 or National Diploma in Electrical Engineering is preferred. - Electrical Trade Certificate. - 3 – 5 years Technical experience including operating on systems up to and including 132kV. - Valid High Voltage Operating Regulations. - Valid Driver’s License. - Computer Literacy (Windows/Server, Virtualization, MS Word, MS Excel, MS Outlook, MS Project, IPAS, SharePoint, MS Visio, project related software applications). Key Responsibilities - Preventative and reactive maintenance on power plant and substation equipment. - Perform inspections on power plant and substation equipment. - Perform MV and HV operations. - Keep work orders and write reports. To Apply If you have the necessary skills and attributes, please submit copies of CV and copy of qualifications to the following email address 3energyrenewables.sa@gmail.com Closing date 11th October 2021.

Experience gained in the Manufacturing FMCG Industry essential Matric + N4 Mechanical or Electrical Qualification Min 1 year working in a hands-on technical role (mechanical or electrical) High attention to detail, flexible and adaptable to change and happy to work shifts, Able to work under pressure

Opportunities in the North West (Rustenburg)   Winder Technician Position:   ·        Electrical Trade Test Certificate (MUST BE: MQA / Section 13 (OLD Olifantsfontein) / MIETTB Qualified) ·        National N4 Certificate ·        5 Years experience as a Winder Technician ·        Process Control & Instrumentation ·        Alstom, ABB and Siemens Winder Control Systems ·        Hydraulic systems and schematics ·        Double Drum Winders ·        Computer literacy (Programming & development of systems) – Citect SCADA, Profibus and Ethernet principles ·        Planning & organizing skills   SA Citizens & Have mining experience   We regret NO: MERSETA or Section 28 applications will be considered.   If you have the relevant qualifications, skills and experience please respond to this ad with CV, Certificates & ID Copy (Fax: to or Email: )

Salary: Market Related Maintenance millwright position at baking manufacturing company based in Johannesburg South  Qualifications and Experience: - Trade Tested as a Millwright - N4 certificate (Mechanical / Electrical Engineering) - 3 years' post apprenticeship experience in manufacturing environment - minimum 3 years' experience in Baking manufacturing - Computer literacy: MS Office  Responsibilities: - Sound knowledge of PLC's: programming and fault finding - Machine overhauls and shut down maintenance - Mixers, millers, ovens, VSD's packaging machines - Able to work shifts, Standby & overtime. - Detail orientation. - Able to work independently. - Strong technical skills. - Must able to do fault finding. - Analytical and Problem solving. - Decision making ability. - Action orientation. - Work standards. - Quality orientation. - Sound technical knowledge and proven maintenance experience on: Filling machines, conveyors, coding equipment, and other Filling & Packing related equipment Candidates without the above required qualifications will unfortunately not be considered for the position. Should you meet the requirements for this position, please email your CV to or fax to . You can also contact Jessica/Chanel on .  Correspondence will only be conducted with short listed candidates. Should you not hear from us within 3 days, please consider your application unsuccessful.

I am qualified trade tested, N4 electrician with a vast of exprience in electrical installations,maintenance,repairs and operation. I am readily available if anythng comes up.my # is .

JOB TITLE: INSTRUCTORS IN THE FOLLOWING TRADES 1. Bricklaying Instructors (2), Electrical Instructors (6), Carpentry Instructors (3), Welding Instructor (2), Fitting Instructor (1), Instrumentation (1), Plumbing (4) JOB DESCRIPTION  To develop appropriate training course materials in the relevant disciplines as per CETA requirements.  Facilitate and train Apprentices/Trainees up to a Trade Test level.  Brush up training for Apprentices/Trainees up to a Trade Test level.  Develop the training facility – Assist, maintain, mentor and coach junior instructors.  Develop the training facility – Assist, maintain, mentor and coach junior instructors.  Making assessment decisions, giving positive and constructive feedback and completing any documentation (review assessment)  Assist in development/design of Training Facilities for National Standard  Ensure that log book have proper records of training and are signed weekly by the instructor  Ensure that POES files is up to date  Set up assessment material  Perform any other tasks pertaining to training dedicated by superior. Minimum Requirements: - • Minimum Qualification N4 or equivalent. • Trade tested in the specific trade. • Minimum practical experience must be 3 years. • Preferable with practical Training and facilitating experience. • Assessor, Facilitator and Moderator will be added as an advantage.

Im a qualified electrician with N4 in electrical & 7yrs experience looking for a job either, contract or permanent

POSITION: Senior Maintenance Technician Salary: Salary: R – R CTC p/m (Benefits Included)Location: Bellville, Cape Town About the company: Mt client is a leading manufacturer, distributer and a global player. They supply an extensive list of local and international clients in the international beverage market. An exciting opportunity for a Senior Maintenance Technician exists within their company. Duties Include: · Maintenance on all equipment· Improve and maintain Preventative Maintenance Program· Be responsible for the Occupational Health and Safety· Building and site maintenance· Assist with maintenance projects· Supervise maintenance team Requirements: · Matric· Clear Criminal Record· Clear Credit Record· At least 5 years relevant work experience in FMCG machinery· N4 or equivalent qualification· Occupational Health & Safety qualification plus experience· A sound knowledge on mechanical, electrical and electronics is advantageous· Energetic and ability to adapt to new environments quickly What to include: · Detailed cv (Please include month and year employed)· Reason for leaving last employ · Current salary · Required salary Email your detailed CV to: · Email your cv to · Please note only Candidates that meet the required minimum will be considered coupled with information requested above.· We regret that we cannot contact all applicants regarding their status. · For more vacancies visit our Page on Facebook: O’Dwyer Personnel · Alternatively follow us on Twitter: OdwyerPersonnel

External Sales Rep ------------ We offerR + Comm. - Monthly ---------Introduction Company based in Randburg is looking for an External Sales Representative ------------ Description Abilities:Will need to work in a diverse cultural environment. Would perform well in a team environment. Needs to be able to work independently. Be able to operate under pressure. Would require a strong customer service ethic. Must be willing to travel on a regular basis to Sub-Sahara ----------- Please take note that correspondence will be with short-listed candidates only. Should you not receive a response from us within 2 weeks from application date then please consider your application unsuccessful. We will retain your resume in our database for other suitable opportunities. ------------------ Profile Knowledge Matric. Would hold a technical qualification in Electrical or Instrumentation (N4 or higher) and have had a minimum of 3 years relevant technical and sales experience. Be able to maintain our CRM system so as to ensure that our customer base is maintained. Is to sell our SSA customers and SSA partners. Valid Driver’s license. Own car ----------- Skills: Would have to be computer literate. Have good Presentation skills. Be proficient in both spoken and written English. Will be required to prepare proposals, quotations and reports.

An FMCG company in Epping Industry is looking for machine operators with 3 years experience on high-speed production machinesMust have matric and N4 or equivalent Mechanical or electrical engineeringMust be computer literateSalary: up to R per month plus benefits: Medical Aid, Provident Fund, 13th cheque, shift allowance and overtimeFor more information please contact Shirley on or email cv

AM QUILIFIED ELECTRICIAN WITH N4 CERTIFICATE AND TRADE TESTED SKILLED WORKER CERTIFICATE CLASS ONE WITH EXPRIENCE IN DOMESTIC,INDUSTRIAL AND COMMERCIAL ELECTRICAL JOBS ON BOTH SINGLE AND 3 PHASE WIRING AM LOOKIN G FOR A JOB THAT CHALLENGES ME TO EXCEED MY OWN CAPABLITIES WHILST I PARTIPATE IN OUTPUT TO ACTIVELY GROW THE ORGANISATION IN A POSITIVE DIRECTION, AM READY FOR SHIFT WORK AND OVERTIME

An established manufacturing company located in Johannesburg is urgently looking for an experienced and qualified Maintenance Foreman to start as soon as possible. Requirements: N4 - N6 Electrical/Mechanical Engineering qualification Trade Tested 5 - 10 years’ experience within a manufacturing field. Should you meet the requirements for this position, please fax your CV to Ashleigh, Lauren or Lize on 862 - show phone - or call us on 215 - show phone - or visit http://www.tumaini.co.za/ Correspondence will only be conducted with short listed candidates. Should you not hear from us within 3 days, please consider your application unsuccessful.

A qualified and experienced Electrician is needed at a reputable packaging manufacturing company to be based in Cape Town. Requirements: N4 in Electrical Engineering Electrician Trade Test Wireman's License 5 - 10 years' experience in a production environment. An Electronics qualification is advantageous. Must be willing to work shifts and overtime. Should you meet the requirements for this position, please fax your CV to Ashleigh, Lauren or Lize on 862 - show phone - or call us on 215 - show phone - or visit http://www.tumaini.co.za/ Correspondence will only be conducted with short listed candidates. Should you not hear from us within 3 days, please consider your application unsuccessful.

An opportunity became available at a very successful bakery manufacturing company based in Pretoria for an Artisan. Should you meet the requirements please send us your CV! Requirements: N4 - N6 in Electrical/Mechanical Engineering Trade certificate 5 – 10 years’ FMCG experience Siemens PLC experience. Should you meet the requirements for this position, please fax your CV to Ashleigh, Lize or Lauren on 862 - show phone - or alternatively visit our website on www.tumaini.co.za. Correspondence will only be conducted with short listed candidates. Should you not hear from us within 3 days, please consider your application unsuccessful.

An amazing opportunity available for a Qualified Electrician within an established food manufacturing company located in Port Elizabeth. Should you have the qualifications and experience please send us your CV! Requirements: Electrician Trade Test Wireman’s License (advantageous) N4 – N6 Electrical Engineering Qualification 5 - 10 years’ relevant experience Should you meet the requirements for this position, please fax your CV to Ashleigh, Lauren or Lize on 862 - show phone - or call us on 215 - show phone - or visit http://www.tumaini.co.za/ Correspondence will only be conducted with short listed candidates. Should you not hear from us within 3 days, please consider your application unsuccessful.

An established FMCG manufacturing company located in Johannesburg is urgently looking for an experienced and qualified Artisan to start as soon as possible. The successful applicant should be in possession of the following qualifications: • N4 - N6 Electrical/Mechanical Engineering qualification • Electrician Trade Test • Wireman’s License (Advantageous) • 5 - 10 years’ experience within a manufacturing field. Should you meet the requirements for this position, please fax your CV to Ashleigh, Lize or Lauren on 862 - show phone - or alternatively visit our website on www.tumaini.co.za Correspondence will only be conducted with short listed candidates. Should you not hear from us within 3 days, please consider your application unsuccessful.

An established FMCG manufacturing company located in Johannesburg is urgently looking for an experienced and qualified Electrician to start as soon as possible. Requirements: • N4 - N6 Electrical Engineering qualification • Electrician Trade Test • Wireman’s License (Advantageous) • 5 - 10 years’ experience within a manufacturing field. Should you meet the requirements for this position, please fax your CV to Ashleigh, Simone, Lize or Lauren on 862 - show phone - or alternatively visit our website on www.tumaini.co.za. Correspondence will only be conducted with short listed candidates. Should you not hear from us within 3 days, please consider your application unsuccessful.

An established FMCG manufacturing company located in Johannesburg is urgently looking for an experienced and qualified Electrician to start as soon as possible. Requirements: • N4 - N6 Electrical Engineering qualification • Electrician Trade Test • Wireman’s License (Advantageous) • 5 - 10 years’ experience within a manufacturing field. Should you meet the requirements for this position, please fax your CV to Ashleigh, Lauren or Lize on 862 - show phone - or call us on 215 - show phone - or visit http://www.tumaini.co.za/ Correspondence will only be conducted with short listed candidates.