Cooling systems thermostats

Professional DSP-controlled switch mode power amplifier. The high efficient class-D design guarantees high power, even at 2Ω! Stereo: 2x 300Wrms @ 8Ω ~ 2x 500Wrms @ 4Ω ~ 2x 750Wrms @ 2Ω Bridge: Wrms @ Wrms @ 4Ω Perfect for both DJ and install applications (pubs, shops, hotels, restaurants,) Complete DSP-section with: HPF: (Hz) eliminates unwanted, energy absorbing frequencies. LPF: (6.3k~20kHz) cuts the upper frequencies if needed to avoid oscillations. 8 Band parametric EQ: (100Hz~12.5kHz, Q:db) for perfect tuning. 2 Limiters: for increased protection (threshold 0~-12dB). 2 Delays: can be set separately from 0 to 20ms (0 to 6,86m) for each channel. Crossover: build an active system (Linkwitz-Riley 24dB/oct, 50Hz~3,15kHz) 3 working modes: Stereo, Bridge, Input Y (mono in, used for active system) Temperature controlled fan cooling DC fault + high temperature + overload + short circuit protections Balanced XLR + jack inputs with possibility for daisy chaining of several inputs. SpeakON + bind-post wire terminal outputsPower stereo 8Ω (1kHz, THD+N 1%): 2x300Wrms Power stereo 4Ω (1kHz, THD+N 1%): 2x 500Wrms Power stereo 2Ω (1kHz, THD+N 1%): 2x 750Wrms Power bridge 8Ω (1kHz, THD+N Wrms Power bridge 4Ω (1kHz, THD+N Wrms Freq. Resp. (+/-0.5dB): Hz Input sensitivity: +4dBu (1,2Vrms) Input CMMR (1kHz): >50dB Input impedance: 30kΩ Balanced, 15kΩ un-Balanced THD: S/R ratio: >100dB Channel separation 8Ω/1kHz: >70dB Damping factor Hz: >200 Cooling: fan cooling Amplifier type: Class D (switch mode) Power supply type: Switch mode Input Connections: Balanced XLR + balanced " (6,3mm) stereo jacks Output Connections: bind-post wire terminals and 2 SpeakON for Stereo & Bridge Output Protection: Soft Start, Short Circuit, Limiter, DC Fault, AC Line Fuse Thermal Cut Amplifier working modes: Stereo ~ Bridge ~ Y-mode DSP processing: HPF: 40Hz ~ 150Hz LPF: 6,3kHz ~ 20kHz PEQ: 8band 100Hz ~ 12,5kHz * Q: 0,5 ~ 5 * Gain: 6dB 2 Clip limiters: 0dB ~ -12dB 2 Delays (time alignment): 0 ~ 20ms (6,86m) X-over (24dB/oct Linkwitz/Riley): 50Hz ~ 3,15kHz Power Supply: Vac Hz Dimensions (mm): 482 x 88 x 280 Weigth (kg): 4,9

Professional DSP-controlled switch mode power amplifier. •The high efficient class-D design guarantees high power, even at 2Ω! •Stereo: 2x 440Wrms @ 8Ω ~ 2x 750Wrms @ 4Ω ~ 2x Wrms @ 2Ω •Bridge: Wrms @ Wrms @ 4Ω •Perfect for both DJ and install applications (pubs, shops, hotels, restaurants, …) •Complete DSP-section with: HPF: (Hz) eliminates unwanted, energy absorbing frequencies. LPF: (6.3k~20kHz) cuts the upper frequencies if needed to avoid oscillations. 8 Band parametric EQ: (100Hz~12.5kHz, Q:db) for perfect tuning. 2 Limiters: for increased protection (threshold 0~-12dB). 2 Delays: can be set separately from 0 to 20ms (0 to 6,86m) for each channel. Crossover: build an active system (Linkwitz-Riley 24dB/oct, 50Hz~3,15kHz) 3 working modes: Stereo, Bridge, Input Y (mono in, used for active system) •Temperature controlled fan cooling •DC fault + high temperature + overload + short circuit protections •Balanced XLR + jack inputs with possibility for daisy chaining of several inputs. •SpeakON® + bind-post wire terminal outputsPower stereo 8Ω (1kHz, THD+N 1%): 2x440Wrms Power stereo 4Ω (1kHz, THD+N 1%): 2x 750Wrms Power stereo 2Ω (1kHz, THD+N 1%): 2x Wrms Power bridge 8Ω (1kHz, THD+N Wrms Power bridge 4Ω (1kHz, THD+N Wrms Power bridge 4Ω (1kHz, THD+NFreq. Resp. (+/-0.5dB): Hz Input sensitivity: +4dBu (1,2Vrms) Input CMMR (1kHz): >50dB Input impedance: 30kΩ Balanced, 15kΩ un-Balanced THD: S/R ratio: >100dB Channel separation 8Ω/1kHz: >70dB Damping factor Hz: >200 Cooling: fan cooling Amplifier type: Class D (switch mode) Power supply type: Switch mode Input Connections: Balanced XLR + balanced ¼" (6,3mm) stereo jacks Output Connections: bind-post wire terminals and 2 SpeakON® for Stereo & Bridge Output Protection: Soft Start, Short Circuit, Limiter, DC Fault, AC Line Fuse Thermal Cut Amplifier working modes: Stereo ~ Bridge ~ Y-mode DSP processing: •HPF: 40Hz ~ 150Hz •LPF: 6,3kHz ~ 20kHz •PEQ: 8band 100Hz ~ 12,5kHz * Q: 0,5 ~ 5 * Gain: ±6dB •2 Clip limiters: 0dB ~ -12dB •2 Delays (time alignment): 0 ~ 20ms (6,86m) •X-over (24dB/oct Linkwitz/Riley): 50Hz ~ 3,15kHz Power Supply: Vac Hz Dimensions (mm): 482 x 88 x 280 Weigth (kg): 5,2

Professional amplifier for all-round sound reproduction Short Circuit protection DC current protection High temperature protection Forced fan cooling Bridge function Built-in limiters Balanced XLR and Jack inputs Ground/lift switch Speakon compatible speaker outputs Binding post speaker outputs (screws) Strong Aluminum 19' front Technical Information Power stereo 4 ohm: 2x 350Wrms Power stereo 8 ohm: 2x 200Wrms Power bridge 8 ohm: 1x 700Wrms Freq. Resp. (+/-1.5dB): Hz Input Sensitivity: 0,77V Input impedance: 20 kohm S/R ratio: >85dB Damping factor: >200 Slew Rate: 60V/uS Cooling: Forced Fan cooling Inputs: Balanced XLR/Jack Outputs: Speakon/binding post Power supply: AC230V / 50Hz Dimensions (mm): 88x483xU)

Professional amplifier for all-round sound reproduction Short Circuit protection DC current protection High temperature protection Forced fan cooling Bridge function Built-in limiters Balanced XLR and Jack inputs Ground/lift switch Speakon compatible speaker outputs Binding post speaker outputs (screws) Strong Aluminum 19' front Technical Information Power stereo 4 ohm: 2x 110Wrms Power stereo 8 ohm: 2x 65Wrms Power bridge 8 ohm: 1x 220Wrms Power parallel 2 ohm: 1x 220Wrms Freq. Resp. (+/-1.5dB): Hz Input Sensitivity: 0,77V / 26dB / 1.4V Input impedance: 20 kohm S/R ratio: >85dB Damping factor: >150 Slew Rate: 40V/uS Cooling: Force Fan cooling Inputs: Balanced XLR/Jack Outputs: Speakon/binding post Power supply: AC230V / 50Hz Dimensions (mm): 44x483xU)

Professional amplifier for all-round sound reproduction Short Circuit protection DC current protection High temperature protection Forced fan cooling Balanced XLR and Jack inputs Ground/lift switch Speakon compatible speaker outputs Binding post speaker outputs (screws) Strong Aluminum 19' front Technical Information Power stereo 4 ohm: 2x 200Wrms Power stereo 8 ohm: 2x 135Wrms Freq. Resp. (+/-1.5dB): Hz Input Sensitivity: 0,77V Input impedance: 20 kohm S/R ratio: >85dB Damping factor: >150 Slew Rate: 35V/uS Cooling: Force Fan cooling Inputs: Balanced XLR/Jack Outputs: Speakon/binding post Power supply: AC230V / 50Hz Dimensions (mm): 88x483xU)

Product Description: Professional 3-channel amplifier with built-in active crossover and subwoofer processor. Can be used as a normal 2-channel amplifier. W total power: Satellite outputs (stereo): 2x450W rms @ 4Ω Subwoofer output (mono): 900W rms @4Ω Very compact housing, only 2U (88mm) high Built-in 24dB/oct. active crossover: Hz selectable crossover point Filters on satellite outputs can be switched on/off Built-in SUB BASS processor Limiters can be switched on/off Sub out phase inverter Soft starts Very efficient cooling DC fault protection High temperature protection Overload and short circuit protections Balanced inputs with combo connectors (jack + XLR) 3 Speakon® outputs: 2x Satellites + 1x Sub out. Technical Information: Power Satellite outputs @ 4Ω: 2x 450Wrms Power Satellite outputs @ 8Ω: 2x 300Wrms Power Subwoofer outputs @ 4Ω: 1x 900Wrms Power Subwoofer outputs @ 8Ω: 1x 600Wrms Freq. Resp. (+/-0.5dB): Hz Active crossover: Hz (24dB/oct. Linkwitz Riley) Input Sensitivity: 770mV Input impedance: 20 kΩ (bal) / 10kΩ (unbal) S/R ratio: >90dB Damping factor: >500 Cooling: dual speed fan cooling Inputs: balanced/unbalanced COMBO (XLR/Jack) Outputs: Speakon® Power supply: AC230V / 50Hz Dimensions (mm): 483x473xU) Weight: 24kg 1 year limited guarantee. For more info on this products please click here

Product Description: A range of professional amplifiers with an exceptional price/performance relation! All amplifiers are fully protected against short circuit, DC current, high temperature, etc... The complete range has a strong aluminum front, balanced jack and XLR inputs, Speakon® and binding post speaker outputs and forced fan cooling. Technical Information: Power stereo 4 ohm: 2x 350Wrms Power stereo 8 ohm: 2x 200Wrms Power bridge 8 ohm: 1x 700Wrms Power parallel: 2 ohm: *** Freq. Resp.: (+/-1.5dB): Hz Input Sensitivity: 0,77V Input impedance: 20 kohm S/R ratio: >85dB Damping factor: >200 Slew Rate: 60V/uS Cooling: Force Fan cooling Inputs: Balanced XLR/Jack Outputs: Speakon/binding post Power supply:   AC230V / 50Hz Dimensions (mm): 88x483xU) 1 year limited guarantee. For more info on this product please click here

Product Description: A range of professional amplifiers with an exceptional price/performance relation! All amplifiers are fully protected against short circuit, DC current, high temperature, etc... The complete range has a strong aluminum front, balanced jack and XLR inputs, Speakon® and binding post speaker outputs and forced fan cooling. Technical Information: Power stereo 4 ohm: 2x 110Wrms   Power stereo 8 ohm: 2x 65Wrms   Power bridge 8 ohm: 1x 220Wrms   Power parallel 2 ohm: 1x 220Wrms   Freq. Resp. (+/-1.5dB): Hz   Input Sensitivity: 0,77V / 26dB / 1.4V   Input impedance: 20 kohm   S/R ratio: >85dB   Damping factor: >150   Slew Rate: 40V/uS   Cooling: Force Fan cooling   Inputs: Balanced XLR/Jack   Outputs: Speakon/binding post   Power supply: AC230V / 50Hz   Dimensions (mm): 44x483xU)    1 year limited guarantee. For more info on this product please click here

Feature: No moving parts, no noise, and solid-state Compact structure, small in size, light in weight Environmental friendly RoHS compliant Precise temperature control Exceptionally reliable in quality, high performance Specification: TE Module Parameter Type: TEC1-12705 Couples: 127 Imax: 5A Umax: 15.4V Qcmax T=0(W): 42.5w Tmax: 65C Size: 40 x 40 x 3.8mm Application: Food and beverage service refrigerator Portable cooler box for cars Liquid cooling Temperature stabilizer CPU cooler and scientific instrument Photonic and medical systems How to install: Chip cooling side mounted heat sink, side mounted cooling system installation guide table. Face flatness less hand stab at 0.03mm to remove the dirt. Chip cooling with heat sink and conduction-cooled block good contact, the contact surface to be coated with a thin layer of thermal grease. Fixed refrigeration refrigeration slice both to make films even by force, but also pay attention to cut. Do not over, to prevent fracturing tiles Package included: 1 x TEC1-12705 cooler plate module  

Professional active speaker cabinet for a wide range of different applications. Heavy duty Polypropylene cabinet housing Bi-Amping technology with separate amplifiers for woofer and tweeter for maximum impact: woofer 245W + tweeter 55W RMS-power Fully tuned 6-Band parametric EQ for perfect sound Active 2-way crossover Perfect for both permanent installations and portable use (Rental, DJ,...) Equipped with a 15" high power woofer & a 1.75" compression driver 2 Balanced MIC + 1 LINE input with level control Balanced LINE output Treble + Bass controls + Master volume Blue power LED on the front panel Built-in M8 Rigging points Built-in 35mm stand adapter Monitor support stands included Built-in heavy duty carrying handle Heavy duty rubber feetAmplifier Tweeter: 55Wrms Amplifier Woofer: 245Wrms Freq. Resp. (+/-3dB): Hz THD (1kHz / 1W): 0,10% Input Sensitivity line: 1V Input Sensitivity micro: 15mV Input impedance 20 kohm S/R ratio (mic off): >85dB EQ low: +/-12dB @ 100Hz EQ high: +/-12dB @ 10kHz Cooling: natural air cooling Microphone input: Bal/unbal XLR/Jack Line input: Bal/unbal XLR 3pin Line outputs: Bal/unbal XLR 3pin Fuse (5x20mm): F5A / 250V Power supply: 115Vac/60Hz 230Vac/50Hz Dimensions HxWxD (mm): 680 x 470 x 400 Weight (kg): 23.3

Description Professional 4-channel power amplifier in an extremely compact 19" 1U-housing (H: 44mm) The high efficient class-D design guarantees high power and very low heat dissipation. Perfect for install applications (pubs, shops, hotels, restaurants,) The unit houses 2 separate class-D amplifiers that can be configured independently to obtain the following combinations: Both amps in stereo mode: 4x 150Wrms @ 4Ω (4x 80Wrms @ 8Ω) Both amps in Bridge mode: 2x 300Wrms @ 8Ω 1amp in stereo + one amp in bridge: 2x 150Wrms @ 4Ω + 1x 300Wrms @ 8Ω Completely silent operation: NO cooling fans! Peak limiter prevents signal distortion DC fault + high temperature + overload + short circuit protections Balanced Combo (XLR + jack) inputs. Speakon + bind-post wire terminal outputsPower stereo 4Ω (1kHz, THD: Wrms / output Power stereo 8Ω: 80 Wrms / output Power bridge Wrms / output Freq. Resp. (+/-1dB): Hz Input Sensitivity: +4dBu (1,2Vrms) S/N ratio: >90 dB Channel separation: >70 dB THD@1kHz: Power supply: AC100V~240V / 50Hz~60Hz Dimensions (mm): 483 x 44 x U) Weight: 5,2 kg

Extremely versatile power supply for passive RGB LED-projectors. Different standalone working modes: Hold mode: Instant access to 9 pre-programmed colors Static chase mode: 12 different color chases with manual speed control Sound chase mode: 12 different color chases with audio triggering Spectrum mix: 32 different spectrum mix colors, including nice color fades Adjustable speed and dimming with faders Slow color fades with adjustable fade time Blackout and 'Full on' function All functions can be controlled directly on the on the LED-Manager or by the optional LEDCON-01 remote. Several LED-Managers can be used in Master/slave mode to create high power, fully synchronized setups. 300Watt power: 2x 150W 24Vdc outputs. (R+G+B) with short-circuit protections Built-in Clock with battery backup and NiMH battery charger (batteries not included) 3 independent programmable on/off timers. (start/stop 3 different color chases at 3 different times!) Can be controlled by any standard DMX controller! 4 DMX channels needed: Ch1=red, Ch2=green, Ch3=Blue, Ch4=Dimmer/strobe. Enclosure prepared for easy installing against the wall. Fan cooling for extra reliability. Power Input: AC 230V~ 50Hz Fuse: 6,3A slow blow (20mm glass) Backup batteries: 3x 1,2V AA-type NiMH rechargeable batteries (optional) Output voltage to LEDs: DC 24V common anode Output power to LEDs: 2x 150W max. (Total = 300W max.) Red: 2x 50W max. (Total = 100W max.) Green: 2x 50W max. (Total = 100W max.) Blue: 2x 50W max. (Total = 100W max.) DMX connections: 3pin XLR (DMX-512 standard) DMX channels: 4 (CH1: red, CH2: green, CH3:blue, CH4:dimmer/strobe) Audio input: None, internal microphone Size: 330 x 202 x 106cm (see drawing below) Weight: 6,6kg

Extremely versatile power supply for passive RGB LED-projectors. Different standalone working modes: Fixed color mode: Instant access to 16 pre-programmed colors Auto chase mode: 16 different color chases with 8 different speeds. Sound chase mode: 16 different color chases with audio triggering Fade chase mode: 16 different color chases fading smoothly at 8 different speeds. Any wall-switch can be used to turn the output on/off, even when used in DMX-mode! All functions can be controlled: Directly on the on the Mini Led Manager With an optional LED WALL DIMMER (special interface) With an optional LEDCON-02 remote With a 300Watt LED Manager By any standard DMX-controller Several Mini Led Managers can be used in Master/slave mode to create high power, fully synchronized setups. 100Watt power 24Vdc output. (R+G+B) with short-circuit protections 4 DMX channels needed: Ch1=red, Ch2=green, Ch3=Blue, Ch4=Dimmer/strobe. Enclosure prepared for easy installing against the wall. No fan cooling: completely silent! Power Input: AC V (50Hz/60Hz) Output voltage to LEDs: DC 24V common anode Output power to LEDs: 1x 100W max (Red: 33W max., Green: 33W max., Blue: 33W max.) DMX connections: 3pin XLR (DMX-512 standard) DMX channels: 4 (CH1: red, CH2: green, CH3:blue, CH4:dimmer/strobe) Audio input: Internal microphone Size: 356 x 132 x 43mm Weight: 1,70kg (Mini LED Manager Mk2)

Compact follow spot based on a W T11 halogen lamp Electronic dimmer ensures smooth dimming of the output High quality aluminium housing with 3 heat-resistant handles Built-in iris and blackout function Internal color changer with 4 color blades to obtain mixed colors Beam angle from 2' to 19' Special reflector design for high luminous flux: lux@5m, lux@9m Overload protection and forced fan cooling Lamp socket: G22 Size (LxWxH): 693x346x170mm (H= 270mm with bracket) Weight: 14kg Excludes Lamp: FKJ W/230V (Philips /Z)

Compact follow spot based on a MSR discharge lamp High quality aluminium housing with 3 heat-resistant handles Built-in iris and blackout function Internal color changer with 4 color blades to obtain mixed colors Beam angle from 2' to 19' Special reflector design for high luminous flux: lux@5m, lux@9m Overload protection and forced fan cooling Built-in magnetic ballast Price Excludes Lamp