Celestron universal mounting

Celestron Universal Mounting Plate CGE Product Info Celestron Universal Mounting Plates extend your mounting capability. Whatever accessories you need to attach to your telescope equatorial mount, the Universal Mounting Plate options from Celestron are what you need. Go with the Celestron CGE Universal Mounting Plate for use with your CGE mount. Features: Quality material and craftsmanship for maximum sturdiness Allows for more mounting capability Package Contents: Celestron Universal Mounting Plate CGE

The universal mounting plate attaches to the mounting platform of your CGEM or CGE Pro equatorial mount. It allows you to attach a variety of accessories including telescope rings, spotting scopes and cameras.

Celestron Universal Digiscoping Adapter The Celestron Digital Camera Adapter places your various point-&-shoot digital cameras close to the eyepiece of your spotting scope. It has a clamp for the eyepiece and various location adjustments so that you get the digital camera centered exactly where it needs to be for the best images with high resolution and no vignetting. As with all digiscoping, it is far easier to align the digital camera's lens with the scope's eyepiece when that eyepiece has a broad, flat rear element-making a bigger target for the camera's vision to fit within.To describe here exactly which cameras work with this is simply impossible, but for some guidance...the shortest distance between the tripod socket and the center of the eyepiece is approximately 1.26" (32mm), while the longest distance between the center of the eyepiece and the tripod socket is approximately 2.91" (74mm). The tripod socket can be as far as approximately 2.12" (54mm) to either side of the center of the eyepiece, so as long as the distance between your camera's tripod socket and the center of its lens is less than this it should likely fit.As with all ventures in the world of digiscoping, you'll need to employ good technique and good equipment to get good pictures-which means a sturdy tripod and secondary support for the camera if possible, a sensibly-high shutter speed for the digital camera and as much care as is possible to prohibit camera movement. This should always include the use of the camera's electronic shutter release cable or remote control if the camera has such capacity.Note: A tripod spacer-like that used under traditional film cameras with Polariod film backs-is often necessary for vertical alignment of cameras with a short distance between their tripod socket and the center of their lens. An inexpensive combination of 2 pieces of inventory to solve the problem (B&H item codes "BO3358" and "GIG1141") is listed here as accessories. Attaches directly to eyepieces with 1.18-2.36" (30-60mm) outer diameter Camera's height to eyepiece adjustable in ±1.18" (±30mm) range Camera's tripod socket adjustable in ±1.65" (±42mm) range Includes 1/4"-20 threaded tripod socket upon base for added support

Celestron Universal Digiscoping Adapter The Celestron Digital Camera Adapter places your various point-&-shoot digital cameras close to the eyepiece of your spotting scope. It has a clamp for the eyepiece and various location adjustments so that you get the digital camera centered exactly where it needs to be for the best images with high resolution and no vignetting. As with all digiscoping, it is far easier to align the digital camera's lens with the scope's eyepiece when that eyepiece has a broad, flat rear element-making a bigger target for the camera's vision to fit within.To describe here exactly which cameras work with this is simply impossible, but for some guidance...the shortest distance between the tripod socket and the center of the eyepiece is approximately 1.26" (32mm), while the longest distance between the center of the eyepiece and the tripod socket is approximately 2.91" (74mm). The tripod socket can be as far as approximately 2.12" (54mm) to either side of the center of the eyepiece, so as long as the distance between your camera's tripod socket and the center of its lens is less than this it should likely fit.As with all ventures in the world of digiscoping, you'll need to employ good technique and good equipment to get good pictures-which means a sturdy tripod and secondary support for the camera if possible, a sensibly-high shutter speed for the digital camera and as much care as is possible to prohibit camera movement. This should always include the use of the camera's electronic shutter release cable or remote control if the camera has such capacity.Note: A tripod spacer-like that used under traditional film cameras with Polariod film backs-is often necessary for vertical alignment of cameras with a short distance between their tripod socket and the center of their lens. An inexpensive combination of 2 pieces of inventory to solve the problem (B&H item codes "BO3358" and "GIG1141") is listed here as accessories. Attaches directly to eyepieces with 1.18-2.36" (30-60mm) outer diameter Camera's height to eyepiece adjustable in ±1.18" (±30mm) range Camera's tripod socket adjustable in ±1.65" (±42mm) range Includes 1/4"-20 threaded tripod socket upon base for added support

Buy Celestron Universal Piggyback Adapter SCT for R1,265.00

Buy Celestron Universal Piggyback Adapter SCT for R1,166.00

Celestron Digital Camera Adaptor Product Info Celestron introduces digital camera adapter universal 93626. Celestron digital camera adapter 93626 is an universal mounting platform that allows you to do afocal photography (photography through the eyepiece of a telescope) using a 1-1/4" or 2" eyepiece. Note: not recommended for slr cameras or digital point and shoot cameras with more than 3x or 4x optical zoom. Package Contents: Celestron Digital Camera Adaptor

It is designed to quickly swap your camera from Ronin-M to any other camera support platform without having to remove the Ronin dovetail or detach the camera. Such as mount your DJI Ronin-M to a tripod, Steadicam, car mount, cable cam etc. Note: A must have for any Ronin-M user's package. Includes: 1 * dovetail plate for DJI Ronin-M 2 * 1/4"-20 screws 1 * Hex spanner Material: Aluminum Alloy

Celestron SkySync GPS Accessory for all Computerized Telescopes Product Info The Celestron SkySync GPS Accessory is a 16-channel GPS module that is compatible with all non-GPS computerized Celestron Telescopes. This Telescope Accessory by Celestron plugs into your telescope's hand control or auxiliary port, and links up and automatically downloads information from orbiting global positioning satellites. Included with the Celestron Telescope Accessory are two mounting straps. Features of Celestron SkySync GPS Accessory: 16-channel GPS module Compatible with all non-GPS Celestron computerized telescopes Plugs into your telescope's hand control or auxiliary port Links up and automatically downloads information from orbiting global positioning satellites Kit includes SkySync GPS Accessory and two mounting straps Package Contents: Celestron SkySync GPS Accessory 93969 (2) mounting straps

Celestron Telescope T-Adapters Product Info Celestron Telescope T-Adapters allow you to attach your 35mm SLR camera to the prime focus of your Celestron Telescope or Spotting Scope This arrangement is used for terrestrial photography and short exposure lunar and planetary photography. Celestron T-Adapters can also be used for long exposure deep-sky photography when using a separate guidescope. Both a T-Adapter and T-RiNG are required to mount a 35mm SLR camera to your Telescope or Spotting Scope. Specifications for Celestron Telescope T-Adapters: Item #: Application: 93625: Universal 1 1/4" T-Adapter. Fits (drop in style) any type of telescope that uses a 1 1/4" focuser or visual back. 93633-A: For all Schmidt-Cassegrains Celestron Telescopes. It threads onto the rear cell. 93635-A: For NexStar 4 Telescope and for all C90 Spotting Scopes. 93640: Universal 1 1/4" T-Adapter. Similar to #93625 but in addition includes an integral 2x Barlow lens which can be used visually or photographically. 93628: For Pro Zoom Spotting Scopes 93644: For EdgeHD 8in Telescope 93646: For EdgeHD 11/14in Telescopes Features of Celestron Telescope T-Adapters: Allow you to attach 35mm SLR camera to the prime focus of Telescopes Can also be used for Spotting Scopes Package Contents: Celestron T-Adapter for Nexstar 4

Celestron Advanced VX Computerized Mount Product Info Engineered from the ground up with astroimaging in mind, the Celestron Advanced VX series Computerized Mount 91519 sets a new standard in mid-level telescopes. This Telescope Mount from Celestron provides you with many of the features found on Celestron’s most sophisticated German equatorial mounts, at an extremely affordable price. The Celestron Advanced VX Mount was specifically designed to provide optimum imaging performance for smaller telescopes. Now your smaller telescope can take advantage of All-Star Polar Alignment and autoguider support. You’ll be able to track through long exposures using permanently programmable periodic error correction. Image across the meridian without doing a meridian flip, so you can seamlessly image the best part of night sky. The Celestron VX Advanced Telescope Mounting System features significantly larger base castings than our previous design, improving stability under heavier loads. Improved motors offer more torque and can handle slight load imbalances with ease. Experienced imagers will love taking this portable mount to a dark sky site, with all the performance of their larger observatory mount. Or, if you’re new to imaging, the Celestron Advanced VX Mount for Telescopes will help you get started with the hobby and keep up with your needs for years to come. Specifications for Celestron Advanced VX Computerized Mount: Tripod: Adjustable, Stainless Steel Tripod Legs: 2" Weight (lbs): 46 lbs (21 kg) Power Supply: Car battery adapter EQ Mount Weight: 17 lbs (7.71 kg) Tripod Height (Max): 64" in (1626 mm) Tripod Height (Min): 44" in (1118 mm) Tripod Weight: 18 lbs (8.16 kg) Counterweight Bar: 12" Length, 0.75" Diameter lbs (5.44 kg) Counterweights: 1 x 11 lbs Payload Capacity: 30 lbs (14 kg) Latitude Range: 7-77 deg Motor Drive: Low cog DC Servo motors with encoders, both axes Slew Speeds: Nine slew speeds, 4 deg/sec maximum Tracking Rates: Sidereal, Solar and Lunar Tracking Modes: EQ North and EQ South Alignment Procedures: 2-Star Align, Quick Align, 1-Star Align, Last Alignment, Solar System Align Communication Ports: 2x AUX ports, Autoguider port, RS-232 port (on hand control) Computer Hand Control: Double line, 16 character Liquid Crystal Display; 19 fiber optic backlit LED buttons Database: 40,000+ objects, 100 user defined programmable objects. Enhanced information on over 200 objects Power Requirements: 12V DC 3.5A (tip positive) Internal Clock: Yes GPS: Optional SkySync GPS Accessory Features of Celestron Advanced VX Computerized Mount: Integer gear ratios and permanently programmable Periodic Error Correction eliminates recurring track errors from the worm gear. New motors offer improved tracking performance & provide more power to overcome load imbalances Updated industrial design offers more rigidity, less flexure and improved aesthetics New design allows viewing or imaging across the meridian without interference from the motors housings Improved latitude range. Can be used between 7 – 77 degrees latitude. Improved electronics with increased memory for future expansion NexStar+ hand control offers multiple language programming (English, French, Italian, German, Spanish) Package Contents: Celestron Advanced VX Computerized Mount

Celestron 14-Inch Dovetail Bar (CGE) Product Info The 14-inch Dovetail Bar (CGE) from Celestron is for mounting a telescope optical tube to a mount or to attach accessories to the top of the optical tube. Having an extra dovetail bar means that a telescope can have its tube rings attached to its own dovetail bar. To use a different telescope for the same mount, all that would then have to be done would be to slide the bar into the mounts clamp and tighten it. Package Contents: Celestron 14-Inch Dovetail Bar (CGE)

Celestron 11-Inch Dovetail Bar (CGE) Product Info The 11-inch Dovetail bar (CGE) from Celestron is for mounting a telescope optical tube to a mount or to attach accessories to the top of the optical tube. Having an extra dovetail bar means that a telescope can have its tube rings attached to its own dovetail bar. To use a different telescope for the same mount, all that would then have to be done would be to slide the bar into the mounts clamp and tighten it. Package Contents: Celestron 11-Inch Dovetail Bar (CGE)

Celestron 9.25-Inch Dovetail Bar (CGE) Product Info The 9.25-inch Dovetail Bar (CGE) from Celestron is for mounting a telescope optical tube to a mount or to attach accessories to the top of the optical tube. Having an extra dovetail bar means that a telescope can have its tube rings attached to its own dovetail bar. To use a different telescope for the same mount, all that would then have to be done would be to slide the bar into the mounts clamp and tighten it. Package Contents: Celestron 9.25-Inch Dovetail Bar (CGE)

Celestron 8-Inch Dovetail Bar (CGE) Product Info The 8-inch Dovetail Bar (CGE) from Celestron is for mounting a telescope optical tube to a mount or to attach accessories to the top of the optical tube. Having an extra dovetail bar means that a telescope can have its tube rings attached to its own dovetail bar. To use a different telescope for the same mount, all that would then have to be done would be to slide the bar into the mounts clamp and tighten it. Package Contents: Celestron 8-Inch Dovetail Bar (CGE)