Celestron universal digiscoping adapter

Celestron Universal Digiscoping Adapter The Celestron Digital Camera Adapter places your various point-&-shoot digital cameras close to the eyepiece of your spotting scope. It has a clamp for the eyepiece and various location adjustments so that you get the digital camera centered exactly where it needs to be for the best images with high resolution and no vignetting. As with all digiscoping, it is far easier to align the digital camera's lens with the scope's eyepiece when that eyepiece has a broad, flat rear element-making a bigger target for the camera's vision to fit within.To describe here exactly which cameras work with this is simply impossible, but for some guidance...the shortest distance between the tripod socket and the center of the eyepiece is approximately 1.26" (32mm), while the longest distance between the center of the eyepiece and the tripod socket is approximately 2.91" (74mm). The tripod socket can be as far as approximately 2.12" (54mm) to either side of the center of the eyepiece, so as long as the distance between your camera's tripod socket and the center of its lens is less than this it should likely fit.As with all ventures in the world of digiscoping, you'll need to employ good technique and good equipment to get good pictures-which means a sturdy tripod and secondary support for the camera if possible, a sensibly-high shutter speed for the digital camera and as much care as is possible to prohibit camera movement. This should always include the use of the camera's electronic shutter release cable or remote control if the camera has such capacity.Note: A tripod spacer-like that used under traditional film cameras with Polariod film backs-is often necessary for vertical alignment of cameras with a short distance between their tripod socket and the center of their lens. An inexpensive combination of 2 pieces of inventory to solve the problem (B&H item codes "BO3358" and "GIG1141") is listed here as accessories. Attaches directly to eyepieces with 1.18-2.36" (30-60mm) outer diameter Camera's height to eyepiece adjustable in ±1.18" (±30mm) range Camera's tripod socket adjustable in ±1.65" (±42mm) range Includes 1/4"-20 threaded tripod socket upon base for added support

Celestron Universal Digiscoping Adapter The Celestron Digital Camera Adapter places your various point-&-shoot digital cameras close to the eyepiece of your spotting scope. It has a clamp for the eyepiece and various location adjustments so that you get the digital camera centered exactly where it needs to be for the best images with high resolution and no vignetting. As with all digiscoping, it is far easier to align the digital camera's lens with the scope's eyepiece when that eyepiece has a broad, flat rear element-making a bigger target for the camera's vision to fit within.To describe here exactly which cameras work with this is simply impossible, but for some guidance...the shortest distance between the tripod socket and the center of the eyepiece is approximately 1.26" (32mm), while the longest distance between the center of the eyepiece and the tripod socket is approximately 2.91" (74mm). The tripod socket can be as far as approximately 2.12" (54mm) to either side of the center of the eyepiece, so as long as the distance between your camera's tripod socket and the center of its lens is less than this it should likely fit.As with all ventures in the world of digiscoping, you'll need to employ good technique and good equipment to get good pictures-which means a sturdy tripod and secondary support for the camera if possible, a sensibly-high shutter speed for the digital camera and as much care as is possible to prohibit camera movement. This should always include the use of the camera's electronic shutter release cable or remote control if the camera has such capacity.Note: A tripod spacer-like that used under traditional film cameras with Polariod film backs-is often necessary for vertical alignment of cameras with a short distance between their tripod socket and the center of their lens. An inexpensive combination of 2 pieces of inventory to solve the problem (B&H item codes "BO3358" and "GIG1141") is listed here as accessories. Attaches directly to eyepieces with 1.18-2.36" (30-60mm) outer diameter Camera's height to eyepiece adjustable in ±1.18" (±30mm) range Camera's tripod socket adjustable in ±1.65" (±42mm) range Includes 1/4"-20 threaded tripod socket upon base for added support

Buy Celestron Universal Piggyback Adapter SCT for R1,265.00

Buy Celestron Universal Piggyback Adapter SCT for R1,166.00

Buy Celestron NexYZ Universal Smartphone Adapter for R1,210.00

Buy Celestron NexYZ Universal Smartphone Adapter for R1,573.00

Buy Celestron NexYZ Universal Smartphone Adapter for R1,831.50

Celestron Digital Camera Adaptor Product Info Celestron introduces digital camera adapter universal 93626. Celestron digital camera adapter 93626 is an universal mounting platform that allows you to do afocal photography (photography through the eyepiece of a telescope) using a 1-1/4" or 2" eyepiece. Note: not recommended for slr cameras or digital point and shoot cameras with more than 3x or 4x optical zoom. Package Contents: Celestron Digital Camera Adaptor

Celestron Wide Angle Eye Piece Celestron's 25mm Long Eye Relief Eyepiece provides a long and comfortable 32mm eye relief and can be used in any telescope or spotting scope that accepts 1.25" barrel diameter eyepieces. This long eye relief allows you to easily see the entire field of view with or without eyewear, and makes finding and tracking subjects faster.Its fully multicoated optics feature Celestron's XLT coatings which minimizes reflection and increases light transmission ensuring bright and crisp images, while delivering true colors. The eyepiece is nitrogen-filled and gasket-sealed to be water and fogproof for use in all weather conditions. The rubber eyecup unscrews from the eyepiece to reveal threads for a T-mount camera adapter, which allows for astrophotography with a telescope or digiscoping with a spotting scope using a DSLR. SPECIFICATIONS Focal Length: 25 mm Eye Relief: 32 mm Barrel Diameter: 1.25" Weatherproofing: Waterproof and fog proof, nitrogen-filled Packaging Info Package Weight: 0.385kg Box Dimensions: (LxWxH) 8.38X4.06X3.55CM IN THE BOX Celestron Wide Angle Eye Piece

Celestron Long Eye Relief Eye Piece The 20mm Wide Angle Eyepiece from Celestron is a 1.25" barrel diameter eyepiece designed to deliver a comfortable 60° wide viewing angle. This wide-angle view allows you to easily see the entire field of view with or without eyewear, and makes finding and tracking subjects faster. This eyepiece can be used in any spotting scope or telescope that accepts 1.25" eyepieces.Its fully multicoated optics feature Celestron's XLT coatings which minimizes reflection and increases light transmission ensuring bright and crisp images, while delivering true colors. To increase its usability, the eyepiece is nitrogen-filled and gasket-sealed to be water and fogproof for use in all weather conditions. The twist-up eyecup unscrews from the eyepiece to reveal threads for a T-mount camera adapter for digiscoping with a DSLR. SPECIFICATIONS Focal Length: 20 mm Viewing Angle: 60° Eye Relief: 20 mm Barrel Diameter: 1.25" Weatherproofing: Waterproof and fogproof, nitrogen-filled Packaging Info Package Weight: 0.29kg Box Dimensions: (LxWxH) 14.73x7.87x6.85cm IN THE BOX Celestron Long Eye Relief Eye Piece

Inserts in to 1.25 focusers Requires T-mount SLR adapter (listed here as accessories) Incorporates 2x magnification Built-in barlow lens can be removed (some telescopes will not focus properly without barlow)

A T-ring converts a camera's mount to a standard T-thread. All camera adapters, including Celestron and Meade T-adapters and universal camera adapters, will fit this T-thread. This T-Ring is designed to work with Nikon brand 35mm SLR cameras. It's also compatible with new digital SLR cameras.