8s ac balanced

The JD Media Mobile 60 is a c ompact 60 watt mixer amp which can be used on mains power (230V AC) or 12 volt battery (12 Volt DC).   The tuner or digital message module can be fitted internally for a neat self contained audio solution. 2 x mic inputs, 1 x Aux input, 1 x mic/Aux input and 1 x tape input. 60 watt 100 volt line Vox priority on Mic 1 and 2 Telephone input VU meter 230VAC and 12v DC operation   Output power: 60 watts Impedance: 100 volt and 4-16ohm outputs No. Inputs: 3 microphone inputs + 2/3 Line inputs possible Output zones: 1 zone Rack mountable: No Power supply: 230VAC &12VDC Dimensions (HxWxD): 88mm x 375mm x 260mm Weight: 6.6Kg   Optional module slot (TP-100RDS, CDP-100MU, CDR-100RDSU, DM-100)  - Easy to use amplifier for both mobile and fixed installation  - Balanced microphone inputs  - Low & hign pass tone control to increase intelligibility  - Tel input terminal for tel night ringer  - LED level meter  - Over current protection  - 3 Mic inputs, 2 AUX & 1 Tape input  - AC / DC12V  - Bass & treble tone control for pack module      THD at 1kHz  Mobile35: less than 1% at 25W    Mobile60: less than 1% at 40W    Output  REC: - 6dB / 3K Unbalanced    Input sensitivity /impedance  Mic: - 50dB /2K BAL    Aux: - 20dB/ 60k (AUX1) BAL    - 20dB/ 15k (AUX2) BAL  Tape: 0dB/3k Unbal  Frequency response  Less than -3dB 150Hz~18kHz (at 1%THD)    Signal to Noise Ratio  Aux: more than 70dB    Mic: more than 60dB  Tone filter  Low 40Hz~400Hz -6dB/oct  High 2.5kHz~20kHz -6dB/oct    Power Consumption  Mobile35: 130W, Mobile 60: 215W    Max curr. draw (220, 230V)  Mobile35: 0.55A, Mobile60: 1A  Power Source(Option)  AC220V/60Hz DC12V  Dimensions (mm)  375(W) x 88(H) x 260(D)  Weight(kg/lbs)

Ibanez - AEG8E-BK AC/EL C/A GUITAR The Ibanez AEG8 BK from the AEG Series which has slender, single-cutaway bodies deliver powerful and balanced acoustic sound, unplugged or through an amp or PA system. 12 MONTHS AUSTRALIA WIDE WARRANTY, all taxes, duties and tariffs paid, FREE DELIVERY WITHIN AUSTRALIA

A real breakthrough in professional amplifier technology: Synq introduces a new range of CLASS-D AMPLIFIERS with exceptional power and competitive pricing! The extremely high efficiency, reduced power waste and very low heat dissipation are the main advantages of these PWM-amplifiers! Incredible space savings for mobile applications: enclosure only 1unit high! Incredible low weight: 3,3kg! Extremely high power output: 2x 540Wrms @ 4ohms Output in bridge mode: Wrms @ 8ohms All the protections you can think of for professional use: Signal + current limiters Overload protection Short circuit current protection DC protection Thermal protection AC, VHF protection Soft start Very powerful bass response, also perfect for subwoofers! Switchable 30Hz low cut filter eliminates unwanted, power consuming, subsonic frequencies. 3 different working modes: stereo, bridge mode, mono mode (inputs linked) Balanced in/outputs on XLR 2 Speakon connectors (left and right outputs) 1 separate output for bridge modePower stereo 8: 2x 300Wrms Power stereo 4: 2x 540Wrms Power bridge 8: 1x Wrms Power efficiency: >90% Freq. Resp. (+/-1dB): Hz Input Sensitivity: 26 dB / 32 dB / 1,4 V S/R ratio (A-Weighted): >100dB Damping factor (5Hz-1kHz): 280 Slew Rate: 29V/uS Cooling: variable speed fan Signal inputs: Balanced XLR Signal outputs: Balanced XLR Speaker outputs: Speakon Power supply: AC V / Hz Power consumption (max peak): Watt Dimensions (WxHxD mm): 482x44xU) Weight (kg): 3,3kg

The ULTRAGAIN DIGITAL ADA8200 from Behringer is an analog to digital, and digital to analog converter that provides 8 analog inputs and outputs, and 8 digital ADAT inputs and outputs. Each analog input features a MIDAS mic preamplifier and XLR and TRS jacks for connecting mics, keyboards, and more. Each analog output features an XLR jack for sending signals to analog mixing consoles, headphone amps and other devices. Housed in a single-space 19" rack-mount enclosure, this unit can be used in your home or project studio to add I/O to your rig for recording and mixing by connecting into your ADAT equipped audio interface. High-quality 8-channel 24-bit A/D and D/A converter for your digital recording/mixing environment 8 MIDAS designed microphone preamps with phantom power Cirrus Logic 24-bit converters Processes 48 and 44.1 kHz sample rates Optical ADAT I/O interface for compatibility All microphone/line inputs are routed to the ADAT output ADAT input routed to all line outputs External sample rate synchronization via wordclock or ADAT input Switching power supply ADA8200 Specifications Microphone Inputs Design MIDAS designed microphone preamp Type XLR connector, electronically balanced, discrete input circuitry Gain Range +10 to +60 dB Maximum Input Level +6 dBu @ +10 dB gain for 0 dB FS Impedance 2.7 k¿ balanced Phantom Power +48 V, switchable Line Inputs Type ¼" TRS connector, electronically balanced, discrete input circuitry Impedance appr. 20 k¿ balanced, appr. 10 k¿ unbalanced Gain Range -10 to +40 dB Maximum Input Level +26 dBu @ -10 dB gain for 0 dB FS Line Outputs Type XLR connector, electronically balanced Impedance appr. 1 k¿ balanced, appr. 500 ¿ unbalanced Max. Output Level +16 dBu @ 0 dB FS Digital Inputs Type TOSLINK, optical connector Format ADAT, 8 channels, 24-bit @ 44.1 / 48 kHz Digital Outputs Type TOSLINK, optical connector Format ADAT, 8 channels, 24-bit @ 44.1 / 48 kHz Sync Source Internal 44.1 / 48 kHz, ADAT input, word clock input Word Clock Type: BNC connector Input level: 2 to 6 V peak-to-peak Frequency range: 44.1 to 48 kHz System Frequency Range 10 Hz to 24 kHz @ 48 kHz sample rate THD Crosstalk Power Power Supply 100 ~ 240 V AC Power Consumption 15 W Fuse T 1A 250 V Mains Standard IEC receptacle Dimensions Dimensions (H x W x D) 1.75 x 19.00 x 8.50" (44.5 x 482.6 x 217.0 mm) Weight 4.6 lb (2.1 kg) Packaging Info Package Weight 6.5 lb Box Dimensions (LxWxH) 21.0 x 12.1 x 4.4

Professional DSP-controlled switch mode power amplifier. The high efficient class-D design guarantees high power, even at 2Ω! Stereo: 2x 300Wrms @ 8Ω ~ 2x 500Wrms @ 4Ω ~ 2x 750Wrms @ 2Ω Bridge: Wrms @ Wrms @ 4Ω Perfect for both DJ and install applications (pubs, shops, hotels, restaurants,) Complete DSP-section with: HPF: (Hz) eliminates unwanted, energy absorbing frequencies. LPF: (6.3k~20kHz) cuts the upper frequencies if needed to avoid oscillations. 8 Band parametric EQ: (100Hz~12.5kHz, Q:db) for perfect tuning. 2 Limiters: for increased protection (threshold 0~-12dB). 2 Delays: can be set separately from 0 to 20ms (0 to 6,86m) for each channel. Crossover: build an active system (Linkwitz-Riley 24dB/oct, 50Hz~3,15kHz) 3 working modes: Stereo, Bridge, Input Y (mono in, used for active system) Temperature controlled fan cooling DC fault + high temperature + overload + short circuit protections Balanced XLR + jack inputs with possibility for daisy chaining of several inputs. SpeakON + bind-post wire terminal outputsPower stereo 8Ω (1kHz, THD+N 1%): 2x300Wrms Power stereo 4Ω (1kHz, THD+N 1%): 2x 500Wrms Power stereo 2Ω (1kHz, THD+N 1%): 2x 750Wrms Power bridge 8Ω (1kHz, THD+N Wrms Power bridge 4Ω (1kHz, THD+N Wrms Freq. Resp. (+/-0.5dB): Hz Input sensitivity: +4dBu (1,2Vrms) Input CMMR (1kHz): >50dB Input impedance: 30kΩ Balanced, 15kΩ un-Balanced THD: S/R ratio: >100dB Channel separation 8Ω/1kHz: >70dB Damping factor Hz: >200 Cooling: fan cooling Amplifier type: Class D (switch mode) Power supply type: Switch mode Input Connections: Balanced XLR + balanced " (6,3mm) stereo jacks Output Connections: bind-post wire terminals and 2 SpeakON for Stereo & Bridge Output Protection: Soft Start, Short Circuit, Limiter, DC Fault, AC Line Fuse Thermal Cut Amplifier working modes: Stereo ~ Bridge ~ Y-mode DSP processing: HPF: 40Hz ~ 150Hz LPF: 6,3kHz ~ 20kHz PEQ: 8band 100Hz ~ 12,5kHz * Q: 0,5 ~ 5 * Gain: 6dB 2 Clip limiters: 0dB ~ -12dB 2 Delays (time alignment): 0 ~ 20ms (6,86m) X-over (24dB/oct Linkwitz/Riley): 50Hz ~ 3,15kHz Power Supply: Vac Hz Dimensions (mm): 482 x 88 x 280 Weigth (kg): 4,9

Professional DSP-controlled switch mode power amplifier. •The high efficient class-D design guarantees high power, even at 2Ω! •Stereo: 2x 440Wrms @ 8Ω ~ 2x 750Wrms @ 4Ω ~ 2x Wrms @ 2Ω •Bridge: Wrms @ Wrms @ 4Ω •Perfect for both DJ and install applications (pubs, shops, hotels, restaurants, …) •Complete DSP-section with: HPF: (Hz) eliminates unwanted, energy absorbing frequencies. LPF: (6.3k~20kHz) cuts the upper frequencies if needed to avoid oscillations. 8 Band parametric EQ: (100Hz~12.5kHz, Q:db) for perfect tuning. 2 Limiters: for increased protection (threshold 0~-12dB). 2 Delays: can be set separately from 0 to 20ms (0 to 6,86m) for each channel. Crossover: build an active system (Linkwitz-Riley 24dB/oct, 50Hz~3,15kHz) 3 working modes: Stereo, Bridge, Input Y (mono in, used for active system) •Temperature controlled fan cooling •DC fault + high temperature + overload + short circuit protections •Balanced XLR + jack inputs with possibility for daisy chaining of several inputs. •SpeakON® + bind-post wire terminal outputsPower stereo 8Ω (1kHz, THD+N 1%): 2x440Wrms Power stereo 4Ω (1kHz, THD+N 1%): 2x 750Wrms Power stereo 2Ω (1kHz, THD+N 1%): 2x Wrms Power bridge 8Ω (1kHz, THD+N Wrms Power bridge 4Ω (1kHz, THD+N Wrms Power bridge 4Ω (1kHz, THD+NFreq. Resp. (+/-0.5dB): Hz Input sensitivity: +4dBu (1,2Vrms) Input CMMR (1kHz): >50dB Input impedance: 30kΩ Balanced, 15kΩ un-Balanced THD: S/R ratio: >100dB Channel separation 8Ω/1kHz: >70dB Damping factor Hz: >200 Cooling: fan cooling Amplifier type: Class D (switch mode) Power supply type: Switch mode Input Connections: Balanced XLR + balanced ¼" (6,3mm) stereo jacks Output Connections: bind-post wire terminals and 2 SpeakON® for Stereo & Bridge Output Protection: Soft Start, Short Circuit, Limiter, DC Fault, AC Line Fuse Thermal Cut Amplifier working modes: Stereo ~ Bridge ~ Y-mode DSP processing: •HPF: 40Hz ~ 150Hz •LPF: 6,3kHz ~ 20kHz •PEQ: 8band 100Hz ~ 12,5kHz * Q: 0,5 ~ 5 * Gain: ±6dB •2 Clip limiters: 0dB ~ -12dB •2 Delays (time alignment): 0 ~ 20ms (6,86m) •X-over (24dB/oct Linkwitz/Riley): 50Hz ~ 3,15kHz Power Supply: Vac Hz Dimensions (mm): 482 x 88 x 280 Weigth (kg): 5,2

12 channel PA-mixing console with very low noise architecture ALT 3-4 bus (2 subgroups) Internal 24bit DSP-effect unit with 100 presets & foot switch USB in/out for direct recording to PC 8 balanced input channels, 4 Mono + 4stereo: Input gain Inserts on mono channels Peak indication @ -5dB High pass filter @ 75Hz 3band equalizer (12kHz/2,5kHz/80Hz) AUX send with pre/post switch EFX send for effects section (post) PAN/BAL control ALT 3-4 / Channel mute button LEVEL with 60mm fader control 48V Phantom power on all balanced micros Use of external effects possible Balanced Main L/R output control Headphone and control room output 2x 10section LED VU-meters External power transformer 19''brackets voor rack mounting included Free recording software available: Audacity Max output level (0.5% thd @ 1kHz): +26dB (MAIN L/R) +20dB (ALT 3/4, AUX/EFX, CTRL ROOM) +20dB (INSERT) More than 100mW (HEADPHONES) @33Ohm T.H.D: dB 20Hz~20kHz (MIX L/R, ALT 3/4, AUX/EFX SEND, CTRL ROOM) @10kOhm Frequency response: 20Hz~20kHz, +1/-2dB (MIX L/R, ALT 3/4, AUX/EFX SEND, CTRL ROOM) @10kOhm Hum and Noise (average Rs=150Ohm): -127dB equivalent input noise -95dB residual noise (MIX L/R, AUX SEND, EFX SEND, CTRL ROOM) -88dB (MIX L/R, AUX SEND, EFX SEND, CTRL ROOM) Master fader at nominal level and all channel volumes at minimum. Maximum Voltage Gain: 74dB MIC IN TO MAIN L/R 74dB MIC IN TO ALT dB MIC IN TO AUX (PRE) 76dB MIC IN TO AUX (POST) 76dB MIC IN TO EFX 80dB MIC IN TO CONTROL ROOM L/R 52.2dB IN TO REC L/R 54dB LINE IN TO MAIN L/R 54dB LINE IN TO ALT dB LINE IN TO AUX (PRE) 56dB LINE IN TO AUX (POST) 60dB LINE IN TO CONTROL ROOM L/R 44dB STEREO IN TO MAIN L/R 44dB STEREO IN TO ALT dB AUX RETURN IN TO MAIN L/R 20dB TAPE IN TO MAIN L/R Crosstalk (@ 1kHz): -70dB between input channels -70dB between input/oputput channels Gain Control (mono input channel) 44dB Variable (-50dB ~ -6dB) (-30dB ~ +14dB) Gain Control (combined mono/stereo input channel) 40dB Variable (-20dB ~ +20dB)p Input channel Equalization: HIGH: 12kHz shelving MID: 2.5kHz peaking LOW: 80Hz shelving *Turnover/roll off frequencies: located 3dB below max. boost/cut LED Meters: 2x 10 segment LED for MAIN L/R, ALT3/4, TAPE IN or PFL Internal Digital Effect: 100 selectable presets FOOT Switch control (ON/OFF) Channel indicators: Peak: an indicator for each channel turns on when the pré-channel fader signal is 5dB below clipping Phantom Power (balanced input): +48V DC Power Supply: AC 230 V, 50Hz Power consumption: 36W Weight: 4,6 kg Dimensions: 328(W) x 90(H) x 420(D) mm

8 channel PA-mixing console with very low noise architecture Internal 24bit DSP-effect unit with 100 pre-sets & foot switch USB in/out for direct recording to PC 4 balanced microphone input channels, 2 mono line + 3 stereo line: Input gain Inserts on mono channels Peak indication @ -5dB High pass filter @ 75Hz 3band equalizer (12kHz/2,5kHz/80Hz) AUX send for monitoring (pre) EFX send for effects section (post) PAN/BAL control LEVEL with rotary control 48V Phantom power on all balanced micros Use of external effects possible Balanced Main L/R output control Headphone and control room output 2x 10section LED VU-meters External power transformer Free recording software available: click the logo to start download. Max output level (0.5% thd @ 1kHz): +26dB (MAIN L/R) +20dB (INSERT) T.H.D: Frequency response: 20Hz~20kHz, +1/-2dB (MIX L/R, AUX SEND, EFX SEND, CTRL ROOM) Hum and Noise (average Rs=150Ohm): -127dB equivalent input noise -95dB residual noise (MIX L/R, AUX SEND, EFX SEND, CTRL ROOM) -88dB (MIX L/R, AUX SEND, EFX SEND, CTRL ROOM) Master fader at nominal level and all channel volumes at minimum. Maximum Voltage Gain: 66dB MIC IN TO MAIN L/R 60dB MIC IN TO AUX 66dB MIC IN TO EFX 76dB MIC IN TO CONTROL ROOM L/R 58.2dB IN TO REC L/R 46dB LINE IN TO MAIN L/R 46dB LINE IN TO AUX 46dB LINE IN TO EFX 56dB LINE IN TO CONTROL ROOM L/R 36dB STEREO IN TO MAIN L/R 6dB AUX RETURN IN TO MAIN L/R 16dB TAPE IN TO MAIN L/R Crosstalk (@ 1kHz): -70dB between input channels -70dB between input/oputput channels Gain Control (mono input channel) 44dB Variable (-50dB ~ -6dB) (-30dB ~ +14dB) Gain Control (combined mono/stereo input channel) 40dB Variable (-20dB ~ +20dB) Input channel Equalization: HIGH: 12kHz shelving MID: 2.5kHz peaking LOW: 80Hz shelving *Turnover/roll off frequencies: located 3dB below max. boost/cut LED Meters: 2x 10 segment LED for MAIN L/R Internal Digital Effect: 100 selectable presets FOOT Switch control (ON/OFF) Channel indicators: Peak: an indicator for each channel turns on when the pré-channel fader signal is 5dB below clipping Phantom Power (balanced input): +48V DC Power Supply: AC 230 V, 50Hz Power consumption: 25W Weight: 3,4 kg Dimensions: 249(W) x 75(H) x 295(D) mm

Gemini PMX-1100 19" Full Size Stereo Preamp DJ Mixer FEATURES: •4 Stereo Channels •State of the Art Cue Section •3 Phono/Line Convertible, 4 Line, and 2 Mic Inputs •Talkover •Master and Record outputs •Master Treble and Bass Controls SPECIFICATIONS: INPUTS:MIC 1 - 1.5mV 2kOhm balanced MIC 2 - 1.5mV 2KOhm balanced Phono @ 1kHz - 2mV 47kOhm Line - 100 mV 27kOhm OUTPUTS: Amp/Booth - 0 dB 1V 400OhmRec - 225mV 5kOhm GENERAL: Bass ± 12d BTreble - ± 12dB Frequency Response - 20Hz - 20KHz +/- 2dB Distortion - less than 0.02%S/N Ratio - better than 80d BTalkover Attenuation -16dBPower Source: - Adapter-115V/15V AC 0.5A or 230V/15V AC 0.5A

The perfect all-round zone mixer for pubs, bars, hotel, restaurants, Easy operation, focused on inexperienced users (advanced settings on rear panel) 4 Totally independent zones: 1 Stereo zone: Balanced XLR + Euroblock connectors and RCA/cinch master mix Volume with max. level trimming 3band tone control (rear panel) 2x 10segment level meters Separate talkover for both mics (rear panel) 3 mono zones, each with: Balanced XLR + Euroblock connectors Individual source select + master mix Volume with max. level trimming 2band tone control (rear panel) 5segment level meters Separate talkover for both mics (rear panel) Mics can be included/excluded for each zone (rear panel) 100Hz HP-filter to protect small speakers (rear panel) 6 Input channels, with input selection on rear panel (7line + 2phono + 2USB) CH1: 3,5mm line input available on the front panel CH6: balanced PA-mixer input (front + rear panel) 2 Microphones with 3band tone control and zone assignable, adjustable talkover. Every Channel has individual peak and signal present leds. Gain levels, PFL and smooth 45mm PRO-faders on all channels 2 Record outputs: 1 cinch + 1 USB Output mute" input on Euroblock connector (closed contact = mute) Emergency input with level control on Euroblock connector: any emergency message will be sent to all zones, while automatically muting all input channels. Technical Information Power Supply: AC 220V 250V / 50Hz Fuse: 20mm glass fuse 250V 500mA slow Frequency response: Hz (+/-1dBu) THD + noise: S/N Ratio (IHF-A): >82dB @ 1kHz. Micro inputs: 1.5mV @ 10kΩ Line/CD inputs: 150mV @ 22kΩ Phono inputs: 3mV @ 47kΩ Record output: 775mV @ 600Ω Master output: 1.5V @ 4k7Ω unbal. Master output: 850mV @ 600Ω bal. Dimensions: 483(W) x 134(H) x 184(D) mm Weight: 4,2kg

The new American Audio Live-Mixer offers balanced sound and an exceptional brought range of features packed in tight measures. It doesn`t matter if it`s used in a practice room or somewhere live during a big event, those mixers will convince you with their clearly arranged face and the operator convenience resulting out of it. All mixers have an integrated 24Bit DSP effects unit offering 100 presets. Mono Channels: 16 mono & 4 stereo channels Input Stereo Main, Group 1/2 & ALT 3/4 output Trim with Peak LED, HPF, 3-band sweepable EQ, AUX 1/2 with Pre/Post switch, 1 EFX, PAN, Mute, PFL & Group switch for mono input Trim with Peak LED, HPF (CH-band EQ, AUX 1/2 with Pre/Post switch, 1 EFX, BAL, Mute, PFL, Group & L/R switch for stereo input Sterio Channels: 3 Stereo Return & Tape with PFL 7-band master EQ with On/OFF switch HP/Control Room with Group & Main switch Phantom Power & Footswitch Main L/R, Group with To Main switch AUX 1, 2 Send, On, PFL, To Group & Main switch 24-bit DSP effect 100 presets, EFX on/off & EFX level XLR and 1/4” phone jack balanced & 1/4” phone jack for Insert on mono input, - XLR balanced & 1/4”phone jack for stereo (CH” phone & phono jack for stereo input (CH”phone jack for AUX return & phono jack for Tape 1/4”phone jack for Main, Group, AUX, EFX, Control Room, Headphone & Footswitch, Phono jack for Tape Features: Peak for each mono channel, PFL, level meter, Mute for each input, PFL for EFX, Phantom power & DSP program Maximum Output Level: 24 dBm Frequency Response (-1dB): 20 Hz - 20 kHz T.H.D.: 70 dB Hum & Noise Ratio: EIN > 127 dB; Residual > 100 dB; Main, Group 1~4, AUX, EFX output > 80 dB Equalization: Mono Input High: 12kHz ±15dB, Mid: 100Hz-8kHz ±15dB, Low: 80Hz ±15dB Equalization: Stereo Input High: 12 kHz ±15 dB, Mid-High:3 kHz ±15 dB, Mid-Low:800 Hz ±15 dB, Low: 80 Hz ±15 dB DSP Effect: 24 bit / 100 presets Power Source: AC V, Hz (external power supply) Dimensions & Weight: (W x H x D): 652 x 420 x 65 mm / 8.8 kg 1 year limited guarantee For more info on this product please click here

CN-1200SA LED Panel (V-Lock battery)Nanguang CN-1200SA is a high output LED studio light, it is lightweight and portable for use. The barndoors help shape lighting area, and the filters for different lighting effects.The features of lightweight and high output make it suitable for both photo and video taking, either for lights setup or studio illumination.Product Features This light uses 1152 selected daylight balanced LED bulbs, high output, low power consumption, and long service life. Without Diffuser & Filter: light is of spotlight effect and suitable for shooting at a relatively long distance. With Diffuser: light is of soft light effect. With Filter: the color temperature of light changes from 5400K to 3200K. Slots are designed on the front surface of the product to fix the diffuser and filter. Clamping Screws: To fix the light panel with U-bracket. U-bracket: To fix the light panel and adjust light direction. Dimmer Knob: For dimming, users can dim to suit different shooting conditions. Standalone Dimmer. For dimming conveniently when the light panel is placed at a high position. Power Switch: To switch on or off. Power Input: For input of DC power. Gels Holder: For packing the diffuser and filter. Power Adapter: For AC 100V~230V to DC inverting and power stabilizing. Barn Doors: For better adjustment of light direction. Specifications LED Quantity: 1152 PCS Total Power: 69W AC Power: 100V-240V DC DC Power: 12 -16.8V Battery Type: for Sony V-Lock Battery Color Temperature: 5600K Size of light Frame: 460mm * 385mm * 90mm Illumination (LM): 8273.8 LM Illumination (Lux): 1m - 10300Lux; 2m - 2700Lux; 3m - 1240Lux Brightness Control: Stepless Weight: 5kg Package Including: Package Includes: 1 x CN-1200SA LED Photo Studio light 1 x AC Power adapter 1 x 3m Power cable 1 x Carrying bag 3 x Diffuser

A real breakthrough in professional amplifier technology SYNQ introduces a new range of CLASS-D AMPLIFIERS with exceptional power and competitive pricing! The extremely high efficiency, reduced power waste and very low heat dissipation are the main advantages of these PWM-amplifiers! Incredible space savings for mobile applications: enclosure only 1unit high! Incredible low weight: only 5,6kg! Extremely high power output: 2x Wrms @ 4ohm! Output in bridge mode: Wrms @ 8ohm All the protections you can think of for professional use: Signal + current limiters Overload protection Short circuit current protection DC protection Thermal protection AC, VHF protection Soft start... Very powerful bass response, also perfect for subwoofers! Switchable 30Hz HPF (high pass filter) eliminates unwanted, power consuming, subsonic frequencies. 3 different working modes: stereo, bridge mode, mono mode (inputs linked) Balanced in/outputs on XLR + 6.3mm jack 2 Speakon connectors (left and right outputs) 1 separate Speakon output for bridge mode Power - stereo (or mono): 2x Wrms @ 8ohm; Power - stereo (or mono): 2x Wrms @ 4ohm; Power - bridge: 1x Wrms @ 8ohm Frequency response: Hz +/-1dB THD: Input sensitivity: mV Input impedance: 20k balanced Input impedance: 10k unbalanced S/N ratio: >100dB Crosstalk (8ohm/1kHz): 90dB Damping Factor (8ohm/1kHz) >300 Slew Rate:29V/uS Weight:5,6kg Dimensions: 482x301x44mm (19'/1U)

The S-mix is a 5-channel compact mixer packed with high-end mixer features. The S-mix features a balanced microphone input on an XLR connector and includes phantom power for connecting condenser microphones. There are two Super-Z, high impedance line inputs on 1/4-inch connectors. There is a stereo channel with two inputs on RCA connectors. Individual volume controls for the mic, lines and stereo channels are also included for enhanced control over the connected signals. And just because this unit is miniature, don't be surprised by its great sound and reliability thanks to high quality components and solid build construction.5-channel mini mixer XLR balanced microphone input with volume control RCA stereo inputs with volume control 1/4" stereo inputs with volume control RCA stereo outputs 1/4" instrument level output 18 Volt AC adapter included

The XGA- amplifier offers clean, reliable power in a durable, lightweight enclosure. If you demand professional amplification performance, the XGA- is perfect for delivering pure, consistent wattage night after night.   With watts of Instant Peak Power ( watts RMS), the XGA- is ideal for powering PA systems and DJ rigs. To ensure seamless, reliable performance, the amp features front-to-rear airflow and a variable-speed cooling fan for thermal stability, along with a limiter circuit switch, DC output protection and short circuit protection.   For true connecting convenience, the XGA- boasts XLR and ¼-inch balanced inputs, as well as RCA unbalanced inputs and three Speakon outputs. The unit also provides front panel indicators for Signal, Clip, Protect and Bridge, plus level controls for channels 1 and 2. Selectable modes for Stereo and Mono Bridge give you even more flexibility, while its sleek, lightweight design ensures total portability.   With clean, dependable power in a resilient, 26-pound enclosure, the XGA- offers unmatched value for anyone who is serious about sound.   Watt IPP* High Power output to drive professional loudspeakers without clipping Front-to-rear airflow and cooling fan for thermal stability and reliability XLR and ¼” (6.5mm Jack) balanced and RCA unbalanced inputs Limiter circuit switch for amp output protection Stereo and Mono Bridge Variable speed fan for low noise Comprehensive front panel indicators including signal, clip, protect and bridge 3 Speakon outputs for Channels A/B/Bridge 5-way binding banana plug channel outputs Bridge control switch DC output protection and Short circuit protection Frequency response 10Hz – 50kHz at 1.5 dB Ground lift switch Total Harmonic Distortion: Less than 0.1% Input sensitivity & Impedance: 0.77v Signal to Noise (20 Hz – 20 kHz) > 100dB * Instant Peak Power Dimensions (WxDxH) 19” x 13.8” x x 350 x 88mm) Weight: Lbs ( kgs)   Frequency Response 10Hz ~ 50kHz ±1.5dB Signal to Noise (LF / HF) >90dB THD (LF / HF) > 0.1% Input Sensitivity 0.77v Maximum Input Level 21dBv/9v Damping Factor (F=1kHz Input Impedance 20K Ω Fuse 5mm x 20mm AC 115v/230v Hz Output Stereo 8 Ω 2 x 400W RMS Output Stereo 4 Ω 2 x 550W RMS Output Bridged W RMS Dimensions (WxDxH) 19” x 13.8” x mm x 350mm x 88mm) Net Weight 26.8 lbs (12.1 kg)