-
loading
Ads with pictures

Power amplifier


Top sales list power amplifier

South Africa
Professional Audio Sound Re-enforcement Power Amplifier, Stereo 1600W RMS, Beta3   Protection: Short Circuit, DC, Overload, Overheat Weight: 30kg
R 10.440
See product
South Africa (All cities)
Professional Audio Sound Re-enforcement Power Amplifier, Stereo 840W RMS per Channel, Beta3 Protection: Short Circuit, DC, Overload, Overheat Weight: 25kg  
R 7.880
See product
South Africa
if your amplifier is damaged or broken it can stop your speakers from performing to their best or even stop some speakers from working all...141970331
R 18.000
See product
South Africa
if your amplifier is damaged or broken it can stop your speakers from performing to their best or even stop some speakers from working all...147013257
R 18.000
See product
South Africa
if your amplifier is damaged or broken it can stop your speakers from performing to their best or even stop some speakers from working all t...144888586
R 18.000
See product
South Africa
High efficiency power and performance Innovative class H-design W per 2 channel Easy connection to bi-amped loudspeakers Biult-in dynamic limiters Complete protection package
See product
Somerset West (Western Cape)
Dixon 4 channel power amp and 8 Channel mixer USB SD card With box Excellent condition
See product
Johannesburg (Gauteng)
Peavey PV power amplifiers w (900w RMS) power per channel at 4 ohms. The Peavey PV PA power amplifier is perfect for live bands, DJs, clubs, discos, schools, church halls, conference venues and installations. In compact 2 U rack size, the Peavey PV PA power amplifier is massive power in a small package. The PV works as a standard full range power amplifier and also features two built-in 150 Hz crossovers for subwoofers. With the crossover selected, the sub frequencies are sent to the speaker outputs to power subs and the higher frequencies are sent to the "HIGH OUT" jack sockets for connection to a separate amplifier for 2-way PA configurations. In addition, the sub 150Hz frequencies are also sent to the "THRU LOW OUT" jack sockets for connection to a second separate sub power amplifier if required. Features: Power Output: 4 ohms 900w RMS / w program per channel Power Output: 8 ohms 550w RMS / w program per channel Power Output Bridge Mode: 8 ohms w RMS / w program Minimum parallel speaker load: 2 ohms per channel or 4 ohms bridge 4 ohms per channel minimum or higher is recommended to maintain cooler temperature for sustained operation DDT™ COMPRESSION: Automatic, switchable with LED indicator COOLING SYSTEM: Two-speed DC fan, air flow back to front LOW CUT FILTER: -3 dB @ 40 Hz, 12 dB per octave CROSSOVER: 150 Hz, 4-pole Linkwitz-Riley approximation INPUTS: Electronic balanced, with Barrier Strip or XLR, TRS mm) jack. These are combination sockets which fit either a 6.3mm (1/4") jack male in the centre or an XLR male CROSSOVER OUTPUTS: Low/Thru and High, TS mm) jack AMPLIFIER OUTPUTS: 3 x Speakons for Chan A, Chan B and Bridge and Binding Posts LED INDICATORS: Red, DDT/clipping; Yellow, signal; Green, power AMP PROTECTION: Full short circuit, open circuit; over-temp thermal; RF; stable into any load LOAD PROTECTION: Turn on/off muting, DC (triac crowbar), low-cut filter DIMENSIONS: Height: 2 U rackmount 8.9 cm, Width: 48.3 cm, Depth:  38.0 cm WEIGHT: 22.3kgs 1 year limited guarantee For more info on this product please click here
R 8.397
See product
Johannesburg (Gauteng)
Peavey power amplifiers with 500w RMS (w program) power per channel at 4 ohms. The Peavey PV PA power amplifier is perfect for live bands, DJs, clubs, discos, schools, church halls, conference venues and installation, in a compact 2 U rack size. The PV works as a standard full range power amplifier and also features two built-in 150 Hz crossovers for subwoofers. With the crossover selected, the sub frequencies are sent to the speaker outputs to power subs and the higher frequencies are sent to the "HIGH OUT" jack sockets for connection to a separate amplifier for 2-way PA configurations. In addition, the sub 150Hz frequencies are also sent to the "THRU LOW OUT" jack sockets for connection to a second separate sub power amplifier if required. Features: Power Output: 4 ohms 500w RMS / w program per channel Power Output: 8 ohms 300w RMS / 600w program per channel Minimum parallel speaker load: 2 ohms per channel or 4 ohms bridge 4 ohms per channel minimum or higher is recommended to maintain cooler temperature for sustained operation Power Output Bridge Mode: 8 ohms w RMS / w program DDT™ COMPRESSION ++: Automatic, switchable with LED indicator COOLING SYSTEM: Two-speed DC fan, air flow back to front LOW CUT FILTER ++: -3 dB @ 40 Hz, 12 dB per octave CROSSOVER ++: 150 Hz, 4-pole Linkwitz-Riley approximation INPUTS ++: Electronic balanced; Barrier Strip, XLR, TRS mm) CROSSOVER OUTPUTS ++: Low/Thru and High, TS mm) AMPLIFIER OUTPUTS: Speakons for Chan A, Chan B and Bridge; Binding Posts LED INDICATORS ++: Red, DDT/clipping; Yellow, signal; Green, power AMP PROTECTION: Full short circuit, open circuit; over-temp thermal; RF; stable into any load LOAD PROTECTION: Turn on/off muting, DC (triac crowbar), low-cut filter DIMENSIONS: Height: 2 U rackmount 8.9 cm, Width: 48.3 cm, Depth: 38.0 cm WEIGHT: 20.5kg 1 year limited guarantee For more info on this product please click here
R 6.397
See product
South Africa (All cities)
Feature:   The amplifier uses the TDA2822M for the amplification chip, this chip is a dual-channel single-chip power amplifier integrated circuit, usually used for audio amplifier in the pocket cassette player (WALKMAN), tape recorders and multimedia active speakers. Can work in the stereo and bridge amplifier (BTL) circuit form.   TDA2822  power amplifier board:   Package Name: TDA2822M Amplifier Kit (Need soldering) Working voltage: DC4.5-9V PCB size: 46 * 35mm Speaker diameter: 50mm Speaker power: 0.25W KA2284 level indicator board: 1. Constant current output 2. Wide operating voltage: (3.5V - 12V) 3. The ALC circuit does not need to connect diodes or transistors 4. The bright level can be adjusted 5. The circuit board adopts military grade 1.6MM FR4 sheet 6. PCB dimensions: 40mm * 19mm TDA2822 power amplifier board list: 1 x PCB board 3 x 470UF25V electrolytic capacitor 2 x 100UF25V electrolytic capacitor 3 x 104 ceramic capacitors 1 x USB + 3.5 lines 1 x 50K dial potentiometer 2 x 4.7 ohm resistance 4 x 10K resistance 1 x 8P IC holder 1 x TDA2822 chip 2 x 8 ohm 0.25W 50MM speaker 1 x 0.5 m cable   KA2284 level indicator board list: 1 x PCB board 2 x XH2.54-2P curved seat 2 x XH2.54-2P line 1 x 100 ohm resistance 1 x 10K resistance 1 x 2.2UF electrolytic capacitor 1 x 10UF electrolytic capacitor 1 x 103 blue and white potentiometer 1 x KA2284 chip 5 x 5MM green to green LED 1 x 5MM red to red LED Soldered PCB, for reference only!
R 292
See product
South Africa (All cities)
FAST AFFORDABLE COURIER SHIPPING TO SOUTH AFRICA 50W+50W TPA3116D2 Digital Power Amplifier Board Official Version Description: This product uses chip TPA3116 Feature: PCB using 1.6MMFR4 wave fiber sheet. 2 ounces of copper platinum thicknes, HASL whole process to ensure that the size of the current through the good performance. Signal coupling using ruby electrolytic capacitor connected to Siemens of Germany and better performance capacitor combination. Taiwan copper resistance using high-precision 1% resistors feet, ensure the machine a good signal to noise ratio. Nikon's main filter capacitor capacitance electrolytic 1000UF25V × 2, ensure strong support for a steady stream of power, more importantly, safe and durable enough pressure. Using fully shielded high-current inductors 12127, ensuring crisp and powerful sound. Supply voltage: DC12 to 26V Supply Current: 4.5A to 7.5A Standby power consumption: 20 to 45mA Audio signal input: A LOW -0.3to6.3V Output power: DC12V 4Ω 25W + 25W DC21V 4Ω 50W + 50W Operating frequency: 20Hz to 20KHz Working environment: -40 to 85 ° C Package included: 1 x 50W+50W TPA3116D2 Digital Power Amplifier Board 50W+50W TPA3116D2 Digital Power Amplifier Board Official Version 50W+50W TPA3116D2 Digital Power Amplifier Board Official Version
R 339
See product
South Africa (All cities)
Audiocenter VA801 Power Amplifier The Audiocenter VA1201 Power Amplifier is 2 Channel, 1050w/ch 4Ohm Sensitivity:0.775V/36dB/32dB,Filter capacitor capacity:10000μf/80V×8,Damping factor:≥350,Slew rate:≥25V/μs A - Guard protection system: A-Guard is AUDIOCENTER comprehensive protection system which includes overload limiter with optimized attack time. Unlike other solutions which depend on separate circuits to address different problems, A-Guard was developed as centralized solution where all protection requirements work together in perfect harmony. A-Guard is only applied when it's necessary to protect the amplifier. This is why VA amplifiers are able to sustain full power output even under complex capacitive loads. SMART OVERHEAT MANAGEMENT: AUDIOCENTER Smart Overheat Management gives VA series the ability to perform in high temperature environments without thermal shutdown. This unique circuitry monitors the amplifier's temperature in real time and when the safe operation of the amplifier is compromised, the output power is reduced but not shutdown.
R 11.252
See product
South Africa (All cities)
Buy TDA7294 2.0 Power Amplifier 100W+100W High Power Amplifier Board AC20-26V for R900.67
R 900
See product
South Africa (All cities)
Buy 1875 Power Amplifier Board BTL Power Amplifier Board Fever Replace SK18752 and for R439.59
R 439
See product
South Africa
Description: The broadband RF power amplifier small, suitable for all types of radio transmission, such as: FM shortwave radio remote control, FM FM radio transmitter, amateur radio 135-175MHz, 380-470MHz walkie-talkie transmitter to use. The low-frequency input can 1mW maximum output power of 2.0W, 512MHz maximum possible output 1.6W, 930MHz maximum possible output 1.0W, 1000MHz maximum possible output 0.8W, the amplifier is equipped with fins, long-term stability. Features: Operating Frequency: 1--930MHz Input power: 1mW (0dBm) Maximum output: 2.0W (33dBm) low frequency (10 MHz) 1.6W (32dBm) IF end (512 MHz) 1.0W (30dBm) high end (930 MHz) 0.8W (29dBm) high end (1000MHz) Operating voltage: 12V (DC) Current job: 300--400mA (determined by the output power) RF connector: SMA female standard Size: 48x48x13mm Note: 1. Never load or load impedance serious loss of time under the circumstances with the use of emission. 2. Do not increase the operating voltage to use, although you can bring the power boost, but the power consumption of the product increases, the     reliability deteriorates. 3. Note the anti-static measures, between devices have a common ground, first connect the RF interface to use, plus electricity. Package included: 1 x RF Broadband Power Amplifier Module
R 483
See product
South Africa (All cities)
The Behringer NX3000 packs an impressive amount of power into a lightweight, cool-running unit. This power amplifier delivers 900 watts/channel into 4 ohms, 1,500 watts/channel into 2 ohms, or a whopping 3,000 watts into 4 ohms bridged, so you'll have plenty of headroom to work with. Experience low noise, superior transient response, and low power consumption, thanks to an efficient switch-mode power supply. Benefit from a linear frequency response at any speaker load, by virtue of the NX3000's SmartSense loudspeaker impedance compensation. Beyond that, Zero-attack limiters supply maximum output with reliable overload protection. The NX3000 comes complete with a built-in stereo crossover, reliable twist-lock speaker connectors, and precise 4-segment LED metering. Delivers 900W/channel into 4 ohms, 1,500W/channel into 2 ohms, or 3,000W into 4 ohms bridged Class D technology with 'near-zero' thermal buildup runs extremely cool Efficient switch-mode power supply gives you low noise, superior transient response, and low power consumption SmartSense loudspeaker impedance compensation yields linear frequency response at any speaker load Impressive damping factor offers superior amplifier control over your speakers Zero-attack limiters supply maximum output with reliable overload protection Positive-detent gain controls with 4-segment LED metering on each channel make gain-staging easy Rear-panel combo XLR and 1/4' TRS input connectors ensure compatibility with just about any source Reliable twist-lock speaker connectors prevent unwanted 'unplugging' incidents Easy-to-use stereo crossover with full-range and bi-amp modes Thermal overload protection protects your amplifier and speakers
R 5.099
See product
Johannesburg (Gauteng)
Vintage Receiver I have had this receiver from 1976 it was the first high class hi-fi system I bought and have had it ever since It is a Tuner amplifier in walnut surround and is still in excellent condition Has a bit of static on the volume/balance (can easily be cleaned) knob otherwise good FEATURES Power Amp Section: 50 w + 50 w DC OCL Pure Complementary Power Amplifier. Separable Preamplifier /Power Amp. 2 Stereo Speaker Systems. 4-Channel Ready IF Output Jack. FM Tuner Section: FM Front End with Dual MOS FET´s & Frequency-Linear 4-Gang Tuning Capacitor. IC IF Amplifier (3-Stage Differential Amplifier, 6 Ceramic Filters). Auto-Touch Tuning. IC Multiplex Stereo Demodulator. Diode Indicator Lights. Strenght-Meter, Center Tune Meter. FM Muting. 3-Stage DC Equalizer. DC Low-Noise Tone Control and Filter Amplifier. Continuously-Adjustable Loudness. Mic Mixing. Tape-to-Tape, Tape Dubbing. 2 Phono Inputs. SEMICONDUCTORS: 4 IC´s; 2 MOS FET´s; 59 Transistors; 3 LED´s; 33 Diodes; 3 Zener Diodes. POWER SUPPLY: AC 117 V, 50/60 Hz. AC OUTLETS: 2 Switched; 2 Unswitched (both total 200 W).
R 4.000
See product
Johannesburg (Gauteng)
A professional-quality rack mount stereo power amplifier designed for installed applications. The rugged all-steel chassis houses a high-current toroidal transformer and Toshiba/Fairchild power transistors for rock-solid reliability and an ultra-high transient response. The rear panel of the unit has both XLR and 1/4" inputs, and Speakon and Binding Post outputs, allowing you to connect to virtually any sound system. The system has rear-to-front ventilation to keep the components cool. Protection circuitry protects the unit against overheating and DC overload. The amplifier also has independent limiters to prevent distortion, front-panel gain controls for each channel, selectable LF filters to reduce hum, and LED lights for monitoring power, signal, and clip status. Professional-quality rackmount stereo power amplifier for installed applications All-steel chassis for a long lifespan High-current toroidal transformer and Toshiba/Fairchild power transistors provide terrific reliability and high transient response XLR and 1/4" input connectors Speakon and touch-proof Binding Post outputs Rear-to-Front ventilation system with air filter for cool, reliable operation Built-in protection circuitry guards against overheating and DC overload Power, Signal, and Clip LEDs for easy monitoring Front-panel gain control knobs Independent limiters on each channel to prevent overload and distortion Selectable LF filters remove hum and other distracting low-frequency sounds Power Rating 8 Ohms: 750W 4 Ohms: 1400W 2 Ohms: 2000W 8 Ohms Bridged: 2800W 4 Ohms Bridged: 4000W Damping Factor > 300 8 Ohms Input Sensitivity 1.23V (+4dBu) Input Impedance 10 kOhms (Unbalanced) 20 kOhms (Balanced) Gain 34dB (50x) Frequency Response 20Hz - 20kHz, +0/-1dB (10dB Below Rated Power) Signal-to-Noise Ratio -100dB, Unweighted Total Harmonic Distortion (THD) Input Connectors 2 x XLR Inputs 2 x 1/4" Inputs Output Connectors 2 x Speakon Outputs 2 x Touch-Proof Binding Post Outputs Controls Front Panel 1 x Power Switch 2 x Gain Control Knobs Controls Rear Panel 10 x Mode Selector DIP Switches 10 x Limiter/Filter DIP Switches Indicators 1 x Power LED 2 x Clip LEDs 2 x Signal LEDs Cooling Continuously Variable Speed Fan Back-to-Front Airflow Power Consumption 2600W Power Requirements 100-120 V~, 50/60Hz 15A Dimensions (HxWxD) 3.5 x 19 x 15.8" (88 x 483 x 402mm) Weight 36.6 lbs (16.6kg)
See product
South Africa
Peavey - IPR 2 7500 STEREO POWER AMPLIFIER IPR2¿ power amplifiers, designed for years of reliable, flawless operation under rigorous use. The groundbreaking IPR2 series utilizes an advanced design that allows Peavey engineers to dramatically reduce weight while increasing output power, reliability and thermal efficiency. IPR2 Series amplifiers are designed with a resonant switch-mode power supply and a high-speed class D topology that yields the highest audio resolution and efficiency available. This revolutionary amplifier offers the sonic superiority and unsurpassed reliability for which Peavey is famous, in an extremely efficient and lightweight design. Advanced technology and extensive protection circuitry allow operation with greater efficiency into difficult loads and power conditions. The DDT¿ (Distortion Detection Technique) circuitry ensures trouble-free operation into loads as low as 2 ohms. DDT protects drivers and ensures that sonic integrity is maintained, even in extreme overload conditions. The IPR2's high-efficiency design allows the amplifier to operate at very low temperatures, and does not require massive heat sinks to cool.
R 44.195
See product
South Africa (All cities)
Crown - XTi4002 Amplifier w/DSP The Crown XTi4002 Power Amplifier is a 3200-watt rack mounted power amp that distinguishes itself with a number of extremely useful precision adjustment controls. It also serves as a fantastic power conditioner, assuring that your system will get clean AC even if you're working with less-than-optimal power sources. A number of unique features on the Crown XTi4002 Power Amplifier allow you to control the subtlest details of your sonic output:
R 33.925
See product
South Africa (All cities)
Behringer EUROPOWER EP2000 Power Amplifier - Professional 2,000-Watt Stereo Power Amplifier with ATR (Accelerated Transient Response) Technology 2 x 1,000 Watts into 2 Ohms; 2 x 750 Watts into 4 Ohms; 2,000 Watts into 4 Ohms (bridge mode) Precise Power, Signal and Clip LEDs to monitor performance XLR and 1/4" TRS input connectors for compatibility with any source Professional speaker connectors and “touch-proof” binding posts support most speaker wiring systems Selectable low-frequency filters (30 Hz or 50 Hz) remove distracting infra-sound frequencies Independent limiters per channel offer reliable protection against overload and distortion High-current toroidal transformer for ultra-high transient response and absolute reliability Ultra-reliable Toshiba/Fairchild power transistors Independent DC and thermal overload protection on each channel automatically protects amplifier and speakers without shutting down the show “Back-to-front” ventilation system including air filter for reliable operation “Built-like-a-tank,” impact-resistant, all-steel 2U rackmount chassis High-quality components and exceptionally rugged construction ensure long life Conceived and designed by BEHRINGER Germany *
R 5.290
See product
Pretoria (Gauteng)
Crown XTi Power Amplifier The all-new XTi 2 Series amps by Crown continue to set the standard for unmatched performance and value, delivering the goods night after night without breaking a sweat. There's no debate – when you choose Crown’s XTi 2 Series, you’re choosing one of the most powerful and innovative amplifiers on the market today. Crown's XTi 2 Series power amplifier has up to watts power. With such innovations as a universal tracking switch-mode power supply and a fully integrated suite of speaker processing tools, these amps are at the top of their class when it comes to thermal efficiency and system flexibility. You also have greatly improved control capabilities. The addition of Peakx Plus™ Limiters gives you full command over threshold, attack and release, and we enhanced the Subharmonic Synth so you can easily manage frequency, gain and filter type, allowing for application-specific tuning. Plus, you'll now be able to tailor fan speed for specific applications and have software visibility of the power supply temperature and AC line voltage. Combine all of that with integrated cast-aluminum rack handles for maximum durability and portability and you have the power to move you – and the world.
R 16.995
See product
South Africa (All cities)
Specification: Power supply type: AC Double 12V Output voltage: DC 12V Quiescent current: 40mA Frequency range: 20Hz-60KHz Number of channels: 2 Output impedance: 4-8 ohm speaker Plug type: 3.5mm stereo interface Carrying power: 30W + 30W Chip Type: TDA2030A Signal to noise ratio: 110dB Appearance size: 73 x 87mm Power amplifier board note: 1. Subwoofer enclosure and subwoofer Speaker power requirements are large enough 2. Subwoofer box recommended to install the appropriate sound-absorbing cotton, so to get better bass overweight, but also with a good subwoofer 3. Power is Recommended to use Ring Cow Dual 12V transformer, ring cattle transformer can provide sufficient power. Package included: 1 x TDA2030A 30W+30W power amplifier board
R 155
See product
South Africa (All cities)
Rotel RMB-1585 5-Ch - Power Amplifier The RMB-1585, Rotel's new flagship theater amplifier, provides both the massive power and sonic sophistication required by the finest home theater systems. With five channels, each capable of producing 200 continuous watts each into 8 ohm loads (a full kilowatt of output power!), the RMB-1585 masters any A/V system regardless of speaker load or room size. Engineered with care. Additional Information FRONT PANEL HEIGHT 5U / 221mm (8.75") POWER REQUIREMENTS 120V, 60Hz POWER CONSUMPTION 1100W STANDBY POWER CONSUMPTION0.5W NET WEIGHT36kg (79lbs.) BTU RATING (4Ω, 1/8th power)2372 BTU/h
R 57.100
See product
South Africa (All cities)
Buy 1000W High Power Amplifier Rectifier Filter Capacitor Board Amplifier Power Sup for R300.07
R 300
See product
South Africa (All cities)
Buy Keyes 8002 Power Amplifier Module Speaker Audio Module DIY Power Amplifier Boar for R140.91
R 140
See product
South Africa (All cities)
Buy TPA3255 digital power amplifier board 2.0 channel 300W+300W new class D power amplifier board for R1,478.00
R 1.478
See product
South Africa (All cities)
Buy LM1875 2x30W High Power Amplifier Module 2.0 Dual Channel Large Power Amplifier for R292.98
R 292
See product
South Africa (All cities)
Buy Keyes 8002 Power Amplifier Module Speaker Audio Module DIY Power Amplifier for R149.00
R 149
See product
Pretoria (Gauteng)
Proaudio - TA Power Amplifier TA Series is a range of two-way professional amplifiers that combines high quality performance and reliability with the latest power amplifications technologies. This high value power-to-cost designs offer, in compact lightweight 2 rack unit space, the sound quality and the durability of traditional class AB and class H designs with the innovation of the latest power devices available. TA is a 2 channel power amplifier that delivers up to 2 x W RMS @ W RMS bridged @ 8 Ω), weighing just 19.5 kg. It features independent gain dials, signal – clip and fault LEDs, stereo XLR input and Output link, 1.4 V to V input sensitivity switch, mono – stereo – bridge switch. Moreover, it is protected against shorts and open circuits. Thanks to its high efficiency heat sinks and high speed DC fans, the TA can withstand the hardest heat conditions ensuring great reliability.
R 6.095
See product

Free Classified ads - buy and sell cheap items in South Africa | CLASF - copyright ©2022 www.clasf.co.za.