Valve float

Float ValveBrand: TorrentiType: Brass Low PressureSize: 40mmArm: 12mmLow pressure brass ball valves.Recommended operating pressure between 0kPa and 200kPa.

Float ValveBrand: TorrentiType: Brass Low PressureSize: 32mmArm: 12mmLow pressure brass ball valves.Recommended operating pressure between 0kPa and 200kPa.

Stockman Float ValveBrand: UnbrandedType: HPColour WhiteBasic valve plus 53mm x 1/2 inch male threaded nipple, back nut and washer. Acid corrosion and lime resistant. Pressure ratings: HP maximum 2000kPa, delivery at 1000kPa = 800 l/h.

Recommended for low pressure high volume life stock troughs Approximate flow 2000 litres per hour, hold back pressure 15mm to 25mm 3bar, 32mm to 50mm 1bar.

Description: 200mm Liquid Float Switch Water Level Sensor Stainless Steel Double Ball   Features: Double float switch can be used in water tank, ponds, tanks, fish tank, and other liquid level control (drainage or water), do the upper and lower level alarm switch. Inside contacts are use reed switch sensitivity is very high. Float ball point can not move in anywhere, the float point is fixed, up and down have circlip limit. The circlip moving is not use, inside reed contacts are not moving. Float switch can not directly control the pump or solenoid valve, float switch inside the reed contact current, control a large load will burn. Control solenoid valves, alarms to add small relays, control water pump need to add a small relay and AC contactor. (According to the pump power equipped with the corresponding AC contactor).   Specification: Material: Stainless Steel Cable length: 30cm Float body Length: 200mm Switching voltage: Max. 220V DC Switching current: Max. 1.5A Carry current: Max. 3.0A   Package includeds: 1 x Stainless Steel Float Switch Double Ball   Details pictures:

Buy Plastic Float Valve Fish Tank Float Valve Small Float Valve Adjustable for R300.00

Description: 1/4" Float Ball Valve Shut off Automatic Fill Feed Fish Tank Aquarium RO Water Plastic float valve automatically start and stop water flow. The float is adjustable to allow you to control the water height. Features: 1/4" inlet, quick connect, fit 1/4" OD tube. Boat length: 3"(76mm) Boat diameter: 1.8"(45mm) Body length: 6"(152mm) Pressure: 0.02-0.8MPa Material: ROM Suitable for Reverse Osmosis System, Fish Aquarium, etc. Package includeds: 1 x Float Ball Valve Details pictures:

Buy DN25 1 Inch Auto Lock Ballcock Float Ball Valve for Water Tank Cooling Tower for R313.98

Buy Torrenti Float Valve Low Pressure Brass 15Mm for R161.69

Buy Torrenti Float Valve Low Pressure Brass 32Mm for R814.86

Buy 3/8 Adjustable Plastic Mini Float Ball Valve Automatic Shut Off For Aquarium Fish Tank RO DI for R168.00

SELECTED OPTION: SIZE: G1/2 CLICK HERE for more options in this item. Specifications: Material: ABS, Copper Color: White Type: G3/8", G1/2"  G3/8" Size: (L)X(H) 15x24.5cm /5.91"x9.65"(appr.) G1/2" Size: (L)X(H) 15x24.5cm /5.91"x9.65"(appr.)   Features: Made of ABS material, durable and not easy to rust. 3/8" and 1/2" connection side entry. Green environmental protection, durable, easy to installation. Simple above water float adjustment and quiet operation. Valve height and water level adjust for proper fit and most flush volume.   Note: Install the fill valve correctly, to ensure that the fill valve works normally: Step 1: Put the filling nozzle through the filling hole on tank side. Be sure that the float is not attached with tank side and the fill valve could not be askew. Then replace the plastic washer and lock nut and screw the lock nut tightly. Step 2: Connect the filling nozzle with water supply hose, screw the hose nut tightly. Then turn on the angle valve to check if water leaks from the connection of hose nut and filling nozzle. If leaks, release the water supply hose and connect again. Water level adjustment and fill valve maintenance: Adjust the float, to set up working water level, to get beat flush performance and save water at the same time. Clean the filter.   Package Included: 1 Pcs Toilet Valve Inlet Part