Valve float low

Float ValveBrand: TorrentiType: Brass Low PressureSize: 40mmArm: 12mmLow pressure brass ball valves.Recommended operating pressure between 0kPa and 200kPa.

Float ValveBrand: TorrentiType: Brass Low PressureSize: 32mmArm: 12mmLow pressure brass ball valves.Recommended operating pressure between 0kPa and 200kPa.

Recommended for low pressure high volume life stock troughs Approximate flow 2000 litres per hour, hold back pressure 15mm to 25mm 3bar, 32mm to 50mm 1bar.

Stockman Float ValveBrand: UnbrandedType: HPColour WhiteBasic valve plus 53mm x 1/2 inch male threaded nipple, back nut and washer. Acid corrosion and lime resistant. Pressure ratings: HP maximum 2000kPa, delivery at 1000kPa = 800 l/h.

Description: 200mm Liquid Float Switch Water Level Sensor Stainless Steel Double Ball   Features: Double float switch can be used in water tank, ponds, tanks, fish tank, and other liquid level control (drainage or water), do the upper and lower level alarm switch. Inside contacts are use reed switch sensitivity is very high. Float ball point can not move in anywhere, the float point is fixed, up and down have circlip limit. The circlip moving is not use, inside reed contacts are not moving. Float switch can not directly control the pump or solenoid valve, float switch inside the reed contact current, control a large load will burn. Control solenoid valves, alarms to add small relays, control water pump need to add a small relay and AC contactor. (According to the pump power equipped with the corresponding AC contactor).   Specification: Material: Stainless Steel Cable length: 30cm Float body Length: 200mm Switching voltage: Max. 220V DC Switching current: Max. 1.5A Carry current: Max. 3.0A   Package includeds: 1 x Stainless Steel Float Switch Double Ball   Details pictures:

Specifications: Material: Copper+Stainless Steel+PVC(Polyvinyl Chloride) Size: Approx. 6.5x6.4x8.2cm/ 2.56x2.52x3.23" Sealing Material: PTFE (Polytetrafluoroethylene) Nominal Pressure: DN15 (mm) Voltage: DC 12V Operating Temperature: 0-100 degrees Valve Features: Low power consumption, energy-saving Connection: Thread, insert stick Actuator Features: DC type & AC type Widely Used: Petrochemical, power, environmental protection and large-scale intelligent water meter control and other fields General use valve that works with a large amount of liquids and gases. Valve has male 1/2" NPT connections. Can be mounted in any direction Package Included: 1 x Motorized Ball Valve

Buy Torrenti Float Valve Low Pressure Brass 15Mm for R161.69

Buy Torrenti Float Valve Low Pressure Brass 32Mm for R814.86

Buy Plastic Float Valve Fish Tank Float Valve Small Float Valve Adjustable for R300.00

Description: 1/4" Float Ball Valve Shut off Automatic Fill Feed Fish Tank Aquarium RO Water Plastic float valve automatically start and stop water flow. The float is adjustable to allow you to control the water height. Features: 1/4" inlet, quick connect, fit 1/4" OD tube. Boat length: 3"(76mm) Boat diameter: 1.8"(45mm) Body length: 6"(152mm) Pressure: 0.02-0.8MPa Material: ROM Suitable for Reverse Osmosis System, Fish Aquarium, etc. Package includeds: 1 x Float Ball Valve Details pictures:

Buy DN25 1 Inch Auto Lock Ballcock Float Ball Valve for Water Tank Cooling Tower for R313.98

Buy 3/8 Adjustable Plastic Mini Float Ball Valve Automatic Shut Off For Aquarium Fish Tank RO DI for R168.00

Description: Automatic Thermostatic Valve can be used in supporting electric water heaters and solar water heaters, the user can adjust their own hot and cold water temperature. Specifications: Color Silver and Black Size Approx. 9x3.5x2cm/3.54"x1.37"x0.78" Working pressure 0.03-1 (Mpa) (MPa) Outlet flow 0.7 (m3 / h) Cold water temperature 5-29 (?? Hot water temperature 50-90 (?? Temperature control accuracy ± 2 ??/span> Diameter DN15 (mm) Weight 357g Usage: 1. Constant temperature mixing valve is designed for hot water system developed supporting products,     widely used in electric water heaters, solar water heaters and geothermal heating water system. 2. And can be used in supporting electric water heaters and solar water heaters, the user can adjust their     own hot and cold water temperature, the required temperature can quickly reach and stabilize. 3. To ensure that the water temperature is constant, and from the water temperature, flow, water pressure     changes, to solve the bath center temperature hot and cold problems. 4. When the cold water is interrupted, the mixing valve can automatically turn off the hot water within a few     seconds, play a security role. Working principle At the mixed outlet of the constant-temperature mixing valve, a thermal element is provided to promote the movement of the valve body in the valve body, to block or open the inlet of the cold and hot water. In the closure of cold water at the same time to open the hot water, when the temperature adjustment knob set a temperature, regardless of cold, hot water inlet temperature, how to change the pressure into the outlet of the cold, hot water ratio also changes, so that The water temperature is always constant, the temperature control knob can be set within the product temperature range, constant temperature mixing valve will automatically maintain the water temperature. Installation 1. The red mark is hot water imports. The blue mark is cold water imports. 2. Set the temperature, such as water temperature or pressure changes, the water temperature changes in     the value of ± 2oC. 3. If the hot and cold water pressure is inconsistent, should be installed in the inlet one-way check valve to     prevent cold, hot water string. 4. If the cold, hot water pressure ratio of more than 8: 1 should be installed on the side of the pressure limit     valve to ensure that the mixed water valve can be properly adjusted. 5. In the selection and installation, please note that the nominal pressure, mixed water temperature range     and other requirements are consistent with the product parameters. Use and commissioning precautions 1. The debugging temperature should be the maximum flow of water to open. 2. The adjustment knob is the direction of rotation is slow, reverse rotation direction is heating, the initial     adjustment, please pay attention from the low temperature direction to adjust the direction of high temperature     to prevent burns. 3. The control button in the direction of low temperature is to close the hot water, high temperature direction is the     end of the cold water, if the hot water temperature is not high, you can close the cold water only hot water bath,     but after use should pay attention to high back to low temperature area, Use burns when used. 4. If the cold, hot water pressure is inconsistent, and there is no installation of one-way stop valve, please note that     after each use, the thermostat transferred to the end of the low temperature direction, that is, turn off the hot water     state, the maximum extent to prevent hot and cold water Cross strings. Package Include: 1x Automatic Thermostatic Valve  

Description: Electric Solenoid Valve For Water Air N/C AC 220V 1/2Inch Normally Closed Suitable for use in water and low viscosity fluid applications. If your central heating or irrigation sprinkler system isn't working correctly it could be down to the solenoid valve. Repair a faulty valve with this brand new, fast acting 220V AC diaphragmstyle replacement. Specification: Voltage: 220V AC Inlet and outlet: hose barbs for 1/2" (outer diameter) hose Pressure Range: 0.02-0.8Mpa??/span> Max fluid temperature: 95°C Operation mode: normally closed Valve type: diaphragm (operated by Servo) Usage: water and low viscosity fluids Please note it is not suitable for use with gravity fed systems Package included: 1 x 220V 1/2" Electric Solenoid Valve Details pictures:  

Description: Electric Solenoid Valve For Water Air N/C 12V DC 1/2Inch Normally Closed Suitable for use in water and low viscosity fluid applications. If your central heating or irrigation sprinkler system isn't working correctly it could be down to the solenoid valve. Repair a faulty valve with this brand new, fast acting 12V DC diaphragmstyle replacement. Specification: Voltage: 12V DC Inlet and outlet: hose barbs for 1/2" (outer diameter) hose Pressure: 0.02 0.8Mpa Max fluid temperature: 95°C Operation mode: normally closed Valve type: diaphragm (operated by Servo) Usage: water and low viscosity fluids Please note it is not suitable for use with gravity fed systems Package included: 1 x 12V 1/2" Electric Solenoid Valve Details pictures: