Tp link poe injector

TP-LINK 8 Port Gigabit PoE+ Switch, 8x Gigabit POE Enabled Ports, 124W PoE Power Supply, Rackmountable, Steel Case

TP-LINK 24 Port Gigabit PoE+ Smart Switch, 24x Gbe RJ45 Ports, 4x Combo RJ45/SFP Ports, at/af, 180W PoE PSU, Tag-based VLAN, STP/RSTP/MSTP, IGMP Snoop, QoS, Limiting

TP-LINK JetStream 24-Port Gigabit PoE+ L2 Managed Switch, 24x Gbe, 4x Combo RJ45/SFP, at/af, 320W PoE PSU, Port/Tag/MAC/Protocol VLAN, Isolation, STP/RSTP/MSTP

This item is sold brand new. It will be ordered from our supplier and normally ships in 15 to 20 working days TP-LINK High Power Wireless Access Point TL-WAN is dedicated to WISP CPE solutions and long distance wireless network solutions. It features up to 500mw wireless transmission power and has a built-in 12dBi dual-polarized antenna which provides an efficient way to pick up and maintains a stable signal for a wireless network connection ranging multiple kilometres. Features: - 12dBi dual-polarized directional antenna boosts wireless range - Dedicated power amplifier and low noise amplifier improve radio performance - Up to 500mw power for longer distance transmission - Weatherproof enclosure, 4KV lightning protection, grounding terminal integrated and 15KV ESD protection - Complies with IEEE b/g/n, wireless speed up to 150Mbps - Supports AP Client Router (WISP Client), AP Router and AP operation mode - Up to 60 meters (200 feet) of flexible deployment with included passive Power over Ethernet Injector - Provides external RP-SMA connector for higher gain antenna upgrade - Supports Antenna Alignment, Distance Setting, Ping Watch Dog and Wireless Speed Test

TP-LINK 8-Port Gigabit Desktop/Rackmount Switch with 8-Port PoE TL_SGPE *NEW* 8 10/100/1000Mbps RJ45 ports Equipped with 8 PoE+ supported ports to transfer data and power over a single cable Works with IEEE 802.3af/at compliant devices, expanding home and office networks Innovative energy-efficient technology reduces power output by up to 75%* Plug and play design, no configuration required *Actual data may vary in different usage environment.

Description Tenda 10/100Mbps POE Injector Tenda 10/100Mbps POE Injector PoE15F can realize the synchronous transmission of network data and power through an Ethernet cable (Cat.5 or better). The output power of each port is as high as 15W, which can be exported as PoE equipment (via RJ45 port). You can connect to ieee802.3af’s PD, such as wireless AP, IP camera, IP phone, etc. In a sense, reducing installation costs and improving network performance is a good choice. Features: Delivers power and data through one Ethernet cable for easy network extension Compatible with IEEE 802.3af compliant powered devices PoE Port Delivers power up to 100 meters Plug and Play, no configuration required Power Over Ethernet One PoE port to power connected devices for flexible network deployment IEEE 802.3af compliant Compatible with IEEE 802.3af compliant powered devices Extend Power Supply Distance of power transmission via Ethernet cable is up to 100 meters Plug and Play Hassle-free setup, no configuration required Specifications: Network standards IEEE802.3、IEEE802.3u LED Indicator Link/Act, PoE Status Interfaces 1*10/100 Base-TX Ethernet ports(Data/PoE) 1*10/100 Base-TX Ethernet ports(Data) Transmission media Recommended: CAT5/5e UTP or better Dimension 84.5mm*44mm*29.8 mm Level of protection ESD: Air discharge: ±10kV Contact discharge: ±8kV Forwarding mode Store-and-forward Transmission Rate 100Mbps PoE budget Single port: AF: 15.4W Whole device: 15W Power consumption 15W Input voltage 100－240V AC 50/60Hz 48V/0.3A DC（Power Adapter Output） Mounting Desktop mounting: support Environment Operating Temperature: 0℃~45℃ Storage Temperature: -40℃~70℃ Operating Humidity: 10%~90% non-condensing Storage Humidity: 5%~90% non-condensing Certification FCC、CE、RoHS b'/xc2/xa0' Why not browse our wide variety of Tenda Products HERE

Tenda 10/100Mbps POE Injector Tenda 10/100Mbps POE Injector PoE15F can realize the synchronous transmission of network data and power through an Ethernet cable (Cat.5 or better). The output power of each port is as high as 15W, which can be exported as PoE equipment (via RJ45 port). You can connect to ieee802.3af’s PD, such as wireless AP, IP camera, IP phone, etc. In a sense, reducing installation costs and improving network performance is a good choice. Features: Delivers power and data through one Ethernet cable for easy network extension Compatible with IEEE 802.3af compliant powered devices PoE Port Delivers power up to 100 meters Plug and Play, no configuration required Power Over Ethernet One PoE port to power connected devices for flexible network deployment IEEE 802.3af compliant Compatible with IEEE 802.3af compliant powered devices Extend Power Supply Distance of power transmission via Ethernet cable is up to 100 meters Plug and Play Hassle-free setup, no configuration required Specifications: Network standards IEEE802.3、IEEE802.3u LED Indicator Link/Act, PoE Status Interfaces 1*10/100 Base-TX Ethernet ports(Data/PoE) 1*10/100 Base-TX Ethernet ports(Data) Transmission media Recommended: CAT5/5e UTP or better Dimension 84.5mm*44mm*29.8 mm Level of protection ESD: Air discharge: ±10kV Contact discharge: ±8kV Forwarding mode Store-and-forward Transmission Rate 100Mbps PoE budget Single port: AF: 15.4W Whole device: 15W Power consumption 15W Input voltage 100－240V AC 50/60Hz 48V/0.3A DC（Power Adapter Output） Mounting Desktop mounting: support Environment Operating Temperature: 0℃~45℃ Storage Temperature: -40℃~70℃ Operating Humidity: 10%~90% non-condensing Storage Humidity: 5%~90% non-condensing Certification FCC、CE、RoHS b'/xc2/xa0' Why not browse our wide variety of Tenda Products HERE

Intellinet POE Splitter Retail Box 2 year Limited Warranty Product Overview Deliver Power over Ethernet to remote devices. The INTELLINET NETWORK SOLUTIONS PoE+ Splitter allows you to deliver both data and electrical power to non-PoE Ethernet-enabled products using the Cat5 Ethernet cable. Using the PoE Splitter, you can take advantage of Power over Ethernet and place Ethernet-enabled products, such as Network Cameras and Wireless Access Points*, where power outlets are not readily available. Simplify Installation for an Ethernet-based Device Having to manage only an Ethernet cable simplifies the physical installation of the device. Without having to worry about the availability of a power source, you can mount Ethernet-enabled products on a ceiling or outdoors, up to 100m (328 feet)** from a power source. The PoE Splitter is simple to install and requires no tools or software. 802.3af Compliant Power over Ethernet The PoE Splitter can be used to complement any PoE injector unit or midspan switch to provide small to medium-sized businesses a complete end-to-end PoE solution. This unit supports 802.3af and 802.3at, ensuring compatibility with other 802.3af/t PoE-compliant injector units or PSE switches. Adjustable Power Output During the setup, the PoE Splitter can be set to power any compatible 5 V, 7.5 V, 9 V or 12 V Ethernet-enabled device via the volt selector located on the side. Features IEEE 802.3af-compliant PoE splitter Can be used to connect non-PoE IEEE 802.3af/t-compliant devices to a PoE injector or PoE switch Output current, selectable: 5, 7.5, 9 or 12 V DC Power output: 5 V / 4 A, 7.5 V / 2.7 A, 9 V / 2.3 A and 12 V / 1.7 A 10/100 auto-sensing input port automatically detects optimal network speeds RJ45 input port with Auto-MDIX and NWay auto-negotiation support Full/half duplex operation Compact metal case LED for link on PoE input port

TP-Link EAP110 Radio Access | EAP110 Brand New & Sealed * Original Product * Valid Manufacturer's Guarantee * Fast Delivery TP-Link Product Code: EAP110 Availability: 73 in Stock Supports passive PoE for convenient installation Ceiling mounting design with chassis make it easy to deploy on a wall or ceiling Captive portal provides one convenient method of authentication for Wi-Fi guests Multi-SSID divides multiple wireless networks for different users Enterprise class Wi-Fi security help to decrease network security threats Overview This wireless access point is specially designed for the high-density, most demanding business environments, including schools, hotels, and enterprises. Its "ceiling lamp" appearance and easy mounting design with chassis make it easy to be integrated seamlessly into any wall or ceiling surface to blend in with most interior decorations. EAP110 supports passive PoE to make deployment effortless and flexible. Specifications Product Description TP-Link Omada EAP110 - radio access point Device Type Radio access point Form Factor External Data Link Protocol Ethernet, Fast Ethernet, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n Frequency Band 2.4 GHz Capacity Maximum number of configured SSIDs: 8 Included Accessories PoE injector, wall mounting kit OS Required Microsoft Windows Vista / XP / 7 / 8 Power Over Ethernet (PoE) Supported PoE Dimensions (WxDxH) 18.94 cm x 17.23 cm x 2.95 cm Delivery & FAQ's * Metropolitan Areas - Delivery of this item within 3 business days after payment reflects * Outlying Areas - Please allow 5 business days after payment reflects for delivery of this item This item carries a valid manufacturers warranty/guarantee. Manufacturer's Code: EAP110 TP-Link

TP-LINK CPE510 - radio access | CPE510 Brand New & Sealed * Original Product * Valid Manufacturer's Guarantee * Fast Delivery TP-Link Product Code: CPE510 Availability: 19 in Stock Built-in 13dBi dual-polarized antenna Directional antenna 6000V Lightning protection 15KV ESD protection Weather proof enclosure Passive PoE adapter Overview TP-LINK's 5GHz 300Mbps 13dBi outdoor CPE, the CPE510 is dedicated to cost effective solutions for outdoor wireless networking applications. With its centralized management application, it is flexible and ideal for point-to-point, point-to-multipoint and outdoor Wi-Fi coverage applications. Professional performance, coupled with user-friendly design, makes CPE510 an ideal choice for both business and home users. Specifications Product Description TP-Link CPE510 - radio access point Device Type Radio access point Form Factor External RAM 64 MB Flash Memory 8 MB Data Link Protocol IEEE 802.11a, IEEE 802.11n Frequency Band 5 GHz Included Accessories PoE injector, pole mount OS Required UNIX, Apple MacOS, Novell NetWare, Microsoft Windows 98 Second Edition, Linux, Microsoft Windows NT, Microsoft Windows 2000/XP/Vista/7/8 Power Over Ethernet (PoE) Supported PoE Dimensions (WxDxH) 7.9 cm x 6 cm x 22.4 cm Delivery & FAQ's * Metropolitan Areas - Delivery of this item within 3 business days after payment reflects * Outlying Areas - Please allow 5 business days after payment reflects for delivery of this item This item carries a valid manufacturers warranty/guarantee. Manufacturer's Code: CPE510 TP-Link