Tester manual

Description Cable Tester RJ45/RJ12 LAN Network Cable Tester RJ11 RJ12 RJ45 Cat5 Networking Tool Description Can test correspondingly double-twisted cables 1, 2, 3, 4, 5, 6, 7, 8andG, meanwhile, Can judge wrong connection, short circuit, and open circuit. Can test RJ 11and RJ45 Test of double-twisted cables: Switch on the power. (S is slow automatic grade, Mis manual.) Put cables into both the main tester and remote tester. The lights of the main tester will turn on sequentially from 1 to G. Main tester: 1-2-3-4-5-6-7-8-G Remote tester: 1-2-3-4-5-6-7-8-G RJ45 1-2-3-4-5-6 RJ11 Following are abnormal connections If one cable, for example, cable NO.3 is open-circuited, the two NO.3 lights of the main tester and remote tester will not turn on. If several cables are not connected, several lights will not turn on respectively. If less than two cables are connected, none of the lights is on. If two ends of a cable are disordered, for example, NO. 2and NO. 4, then displays on: Main tester: 1-2-3-4-5-6-7-8-G Remote tester: 1-4-3-2-5-6-7-8-G If two cables are short-circuited, neither of the corresponding lights is on of the remote tester while the main tester remains unchanged. If three cables, including three, are short-circuited, none of the corresponding lights are on. If test patch panels or wall plate outlets, 2 cables that can match each other (RJ45) will be connected to the tester. If test cables of the same axes, BNC turns on when the cable works. 9V reduplicated battery is used in this tester. The battery is to be changed if any weak light appears (Battery is not included.) Package 1 x RJ45 RJ11 RJ12 CAT5 UTP Network LAN Cable Tester Networking Tool 1 x Leather Pouch 1 x User manual What’s in the box 1x LAN/Phone RJ b'/xc2/xa0' Looking for longer CAT cables? Why not take a look at all of our Ethernet Cables we have in store for you, just click HERE

Cable Tester RJ45/RJ12 LAN Network Cable Tester RJ11 RJ12 RJ45 Cat5 Networking Tool Description Can test correspondingly double-twisted cables 1, 2, 3, 4, 5, 6, 7, 8andG, meanwhile, Can judge wrong connection, short circuit, and open circuit. Can test RJ 11and RJ45 Test of double-twisted cables: Switch on the power. (S is slow automatic grade, Mis manual.) Put cables into both the main tester and remote tester. The lights of the main tester will turn on sequentially from 1 to G. Main tester: 1-2-3-4-5-6-7-8-G Remote tester: 1-2-3-4-5-6-7-8-G RJ45 1-2-3-4-5-6 RJ11 Following are abnormal connections If one cable, for example, cable NO.3 is open-circuited, the two NO.3 lights of the main tester and remote tester will not turn on. If several cables are not connected, several lights will not turn on respectively. If less than two cables are connected, none of the lights is on. If two ends of a cable are disordered, for example, NO. 2and NO. 4, then displays on: Main tester: 1-2-3-4-5-6-7-8-G Remote tester: 1-4-3-2-5-6-7-8-G If two cables are short-circuited, neither of the corresponding lights is on of the remote tester while the main tester remains unchanged. If three cables, including three, are short-circuited, none of the corresponding lights are on. If test patch panels or wall plate outlets, 2 cables that can match each other (RJ45) will be connected to the tester. If test cables of the same axes, BNC turns on when the cable works. 9V reduplicated battery is used in this tester. The battery is to be changed if any weak light appears (Battery is not included.) Package 1 x RJ45 RJ11 RJ12 CAT5 UTP Network LAN Cable Tester Networking Tool 1 x Leather Pouch 1 x User manual What’s in the box 1x LAN/Phone RJ b'/xc2/xa0' Looking for longer CAT cables? Why not take a look at all of our Ethernet Cables we have in store for you, just click HERE

Specification: 1. Characteristics Qualcomm QC2.0/QC3.0/MTK-PE quick-charge power tester /Voltage trigger; the quick-charge mobile phone will cost at least 2000RMB-5000RMB, but how does the quick-charge factory test? Please let qualcomm QC2.0 / QC3.0 / MTK - PE Quick-charge Trigger simulate the quality test and aging test for expensive phones in mass production, and let the digital players DIY the usage and quality judgment. The product has the built-in qualcomm QC2.0 Handshake Protocol, which can simulate the qualcomm QC2.0 Protocol A and B of quite expensive high-end phones in the current market. Through sending the Handshake Protocol instruction, it can support the qualcomm QC2.0 charger and charger baby to draw the voltage and show its value, and it can also output to the USB as the aging and testing; it can also draw the fixed power adapter of 9V, 12V and 20V to supply power to the corresponding equipment; there are display screen, power intensity LED light, mode switching, fixed voltage supply, buzzer hint and USB output, so that the application is diversified, and it is the perfect equipment for both manufacturer and digital player. 2. Function A: Support the qualcomm QC3.0 and compatible with QC2.0 protocol, and long press the key to switch the different trigger function modes: 1) Output 5V/ 2A 2) Output 9V / 1.7A 3) Output 12V / 1.3A 4) Enter QC3.0 mode and press 0.2 V for increase and decrease test B: support Mediatech MTK - PE quick-charge protocol (this mode must have 10ohm the output trigger the high-voltage high-power) 3. Operating instructions 1) Function switch and data reset: long press to switch the three kinds of measuring display modes: switch among QC2.0 / QC3.0 / MTK-PE, and press for consecutive 5 times to reset the capacitance power). 2) Long press under QC2.0 mode: short press for voltage activation switch (5V / 9V / 12V/ 20V), and double click for automatic cycle activation switch. 3) Long press under QC3.0 mode: short press to minus 0.2 V, double click to plus 0.2 V, three clicks to automatically minus 0.2 V, and four click to continuously plus 0.2 V. 4) Long press under MTK - PE mode: first double click to increase the voltage, and then click to decrease the voltage, three clicks to continuously decrease the voltage, and four clicks to continuously increase the voltage; under the mode of continuous voltage increase or decrease, short press or double click will exit the continuous increase or decrease mode and enter the static trigger mode. Comment: the automatic factory test pattern is added, that is, the system has power memory under the automatic mode, and can enter the automatic quick measurement mode, improving the production test efficiency. Warm prompt: under MTK-PE function mode, D+D cable is the data connection state, and at this time, it can be used as the U disk or the common tester, so that the phone Handshake Protocol can quick charge through the tester data transfer, so if it is used as the USB tester fully, please adjust it to MTK - PE mode for normal USB tester. Notice: This equipment draws the quick charger baby that supports qualcomm QC2.0 /QC3.0 / MTK - PE Protocol with high voltage, so the output cannot be directly used as the mobile phone charge, because the ordinary cell phone supports 5V, and qualcomm voltage is 9V, 12V and 20V, so such high voltage cannot directly enter the normal mobile phone. It is disappointing to be misunderstood due to the users’ error. Please keep in mind that this is not the quick charge accelerator, but just draws the voltage of qualcomm QC3.0 products through the instrument, and determine whether it is the real qualcomm QC2.0/3.0 charger baby, so as to help people identify it or cooperate with our aging test for the manufacturer or players. This equipment can choose the alternate aging mode and manual single-voltage trigger aging mode; under the manual mode, short press the button to send 5V/9V//12V/20V quick charge protocol; if some chargers have no 12V and 20V, it means that the charger only supports 9V, and we can accurately judge whether qualcomm QC2.0 belongs to the A Protocol or B Protocol. Packge Included: 1 x QC2.0/QC3.0/MTK-PE Trigger USB Tester Detail Pictures:

Brand NO Color Black + orange Quantity 1 Interface RJ-45/RJ-11 Features Automatic scanning for quick and easy use; cables: RJ11, RJ45, interchanger port; power: DC 9v battery; power consumption: 20mA; it can test twisted-pair cable 1, 2, 3, 4, 5, 6, 7, 8, G; key: "ON" for normal testing speed, "S" for slow, "M" for manual. Main tester: 1-2-3-4-5-6-7-8-G; long distance tester: 1-2-3-4-5-6-7-8-G(RJ45) Packing List 1 x Tester 1 x English manual General Quantity 1 Specification Interface RJ45 , RJ11 Packing List 1 x Tester1 x English manual

Features: It also can be operated manually. You can press the button "FUNC" to select one certain measuring mode. Has the function of data hold. Long press the "FUNC" key to turn on/ off this tester. Automatic power off after it is idle for about 10 minutes. And on this occasion, it can be recovered to use by pressing any key. Over load indication. Low battery indication.   Specifications: Display:   count LCD display Power supplied by:   1 * 3V CR battery Operating temperature:  0 to 40 Celsius degree Operating humidity:  ï¼Âœ 80%RH Storage temperature: -10 to 50 Celsius degree Storage humidty: ï¼Âœ 70%RH Resistance measurement: Auto scanning range:      Ω to MΩ Manual measuring range:     Ω to MΩ Capacitance measurement: Auto scanning range:      nF to μF Manual measuring range:     nF to mF   Package Included: 1PC x SMD tester 2 PC x Backup test pins 1PC x Storage box 1PC x User manual   Warranty: 7 day s one-off return-to-base warranty (Note: return-to-base warranty is that you pay your shipping to send the faulty product back and we pay ours to send you a replacement) for manufacture fault unless otherwise stated in the auctions. Faulty goods must be advised within 7 day of receipt, and faulty goods must be returned in original condition and packaging.  Warranty does not cover the damages due to physical, water, fire, user's mis-uses, problem of compatibility, and etc.  

Goldtool LAN Cable Tester- Multi network cable tester-10baseT, 10base2, RJ45/RJ11 modular cables, 258A, TIA568A/568B, token ring, Retail Box, 1 year warranty Easy testing of correct pin configuration of 10baseT, 10base2, RJ45/RJ11 modular cables, 258A, TIA568A/568B, token ring, etc. Product Overview The Goldtool TCT-141 LAN Cable Tester- Multi network cable tester-10baseT, 10base2, RJ45/RJ11 modular cables, 258A, TIA568A/568B, token ring. Test installed cables either on wall plate or patch panel from a distance. Check for cable continuity, miswiring, open, short, grounding, and pin configurations. Highlights ¿Includes local and remote unit plus carrying case and instruction sheet ¿Identifies miswires and disconnects ¿Includes jumper leads Features ¿Cable adaptors¿RJ45 M-M, 2 RJ45MBNCF BNC M-M. ¿On-board connectors¿2 RJ45F (tester), 1 RJ45F (remote). Specifications ¿ Connection type RJ-45, RJ-11 and BNC ¿ Remote tester Yes ¿ Mode Auto and manual for test Packing Contents ¿1 x BNC connector ¿2 x BNC to RJ-45 cable 24 cm ¿1 x RJ-45 cable 23 cm ¿2 x 8P to 6P spacer ¿1 x manual

FAST AFFORDABLE COURIER SHIPPING TO SOUTH AFRICA Descriptions: The Digital Insulation Resistance Tester series have high performance, and safe configuration and improved electrocircuit. It is one new item which has more fully function, higher precision, and easier operation. It's also one quakeproof, dustproof and dampproof tester and can fit work environment of outdoor. The output testing voltage changed between 500V/1000V/2500V/5000V for different item no. The resistance 200GΩ, the tester also can measure alternating voltage. This Tester apply for all kinds or electric equipment and insulation materials such as transformer, electromotor, cable, switch, appliance, etc. It is a perfect electrical testing meter. Specifications: Testing Voltage:500v/1000v/2500v/5000v Insulation Resistance:1MΩ-200GΩ Accurancy: 1MΩ -200MΩ:±(3.0% of rdg + 5 digits); 200MΩ-10GΩ:±(5.0% of rdg + 5 digits); 10MΩ -200GΩ:±(10.0% of rdg + 5 digits); AC Voltage:750V Accurancy:±(2.0% of rdg + 5 digits); Display:1999 Range Select:AUTO Data Hold:yes Low battery indication:yes Back Light:yes HV red indication lamp light:yes Features: Size of LCD: 68×55mm (Height of character is 35mm) Power: 1.5V(AA)*6 Size of shape: 218×122×75mm Weight: 900g Environment:Working temperature: 0~40°C,relative humidity Storage temperature: -10~50°C, relative humidity Package Included: 1 x HP-6688B Resistance Tester 3 x Test Lead 1 x Retail Box 1 x English Manual 1 x Test Leads 1 x HP-6688B Black bag Detail Pictures: HoldPeak HP-6688B Insulation Resistance Tester Meter Digital 5000V Auto Range Megohmmeter multimeter HoldPeak HP-6688B Insulation Resistance Tester Meter Digital 5000V Auto Range Megohmmeter multimeter HoldPeak HP-6688B Insulation Resistance Tester Meter Digital 5000V Auto Range Megohmmeter multimeter

Description:   Digital LCD TDS TEMP PPM Meter Tester Filter Pen Stick Water Quality Purity   Features:    1.This is a digital TDS meter tester to test the filter water quality purity, to check the performance of your water filter, to check for hardness,to make sure you always drink pure water.Saves measurements for convenient reading and recording New Arrival. 2.Auto-off function: turns off meter after 5 minutes of non-use to conserve batteries. 3.Automatic temperature compensation 4.Gold-plated chip performances more stable. 5.Can be used in: Water purifiers and filters, food(vegetable, fruit)&drink quality monitoring, pools and spas, aquarium, hydroponics 6.LCD reading is convenient and easy.   Specification:   1. Type: Portable Water Quality Tester TDS-3P 2. Display: LCD Digital 3. Test Range: TDS:0-9990 PPM 4. Test Precision: ±2% 5. Battery: 3 V * 1 button battery 6. Environment temperatuer: 0 ~ 80°C 7. Size: 148*30*20mm/5.9*1.2*0.8'' 8. Test Items: Heavy metals, total hardness, detecting water temperature 9. Applicable industry: Swimming pool, water laboratory, the CDC, the aquaculture industry, hospitals, household water, drinking water, aquarium. 10. Color: Blue How to use it: 1.Please unplug the electrode sleeve before use 2.Press the switch,place the electrode into the test Note: 1.keep the electrode clean,cover the electrode protective sleeve,please take out the batteries for long periods idle. 2.This product requires a 3V CR2032 button battery.   Package includes:    1 x Water Quality Tester 1 x Battery(Included in tester) 1 x Leather Storage bag 1 x English User Manual   Details pictures:   

Description: KT-401 Air Ion Tester Counter -Ve Negative Ions With Peak Maximum Hold Features: This air ion tester is designed for test high level concentration of negative or positive air ion. It is effective to test the electric charge on the surface of textile by strict. With it you can estimate whether the air ion generator or air purifier is working in good state. Simple and small design, easy to carry,very easy to hang as a necklace. Test the textile or cloth, judge the ion's polarity and concentration. The reading of the tester is correlative to the air ion concentration, but not exactly the number of it. In factor, this tester can only provide you a rough measurement to the air ion source. Test ion generator, air purifier, textile, cloth ect. Judge ion polarity and concentration. Don't touch the rear square metal of the tester when testing. 　 Specification: Power supply: 1.5V x 2 LR44 button battery Dimensions: 80mm(L) x 30mm(W) x 10mm(H) Weight: 90g LCD Display: Max reading 1999 Test range: 1x10000 to 1999x10000 ions/cc. Resolution: 1x10000 ions/cc Package includes: 1 x Air Ion Tester 4 x LR44 Button 1 x User Manual Details pictures:

KT-401 Air Ion Tester Counter -Ve Negative Ions With Peak Maximum Hold Features: This air ion tester is designed for test high level concentration of negative or positive air ion. It is effective to test the electric charge on the surface of textile by strict. With it you can estimate whether the air ion generator or air purifier is working in good state. Simple and small design, easy to carry,very easy to hang as a necklace. Test the textile or cloth, judge the ion's polarity and concentration. The reading of the tester is correlative to the air ion concentration, but not exactly the number of it. In factor, this tester can only provide you a rough measurement to the air ion source. Test ion generator, air purifier, textile, cloth ect. Judge ion polarity and concentration. Don't touch the rear square metal of the tester when testing. ¿¿¿ Specification: Power supply: 1.5V x 2 LR44 button battery Dimensions: 80mm(L) x 30mm(W) x 10mm(H) Weight: 90g LCD Display: Max reading 1999 Test range: 1x10000 to 1999x10000 ions/cc. Resolution: 1x10000 ions/cc Package includes: 1 x Air Ion Tester 4 x LR44 Button 1 x User Manual Details pictures:

ORP-2069 Digital Pen-type Redox Tester ORP Meter Tester Measure Water This ORP meter is a pen-type device to measure the amount of Oxidation Reduction Potential (ORP) level in sample quickly and conveniently. ORP is a tendency of the solution to either gain or lose electrons. The backlight LCD equipped enables users to do testing and measurement even in dark fields.    Oxidation is defined as the loss of electrons in a molecule, atom or ion. An oxidizing agent (e.g. Chlorine and Ozone) is a substance that acquires electrons in a Redox reaction. ORP is a potential which is measured in millivolts (mV). The more positive the ORP value, the greater the power of water disinfection, thus the faster the microorganism is killed (oxidized).    ORP is correlated with the quality and purity of water. ORP meter has a wide range of applications in water sources, aquarium, hydroponics, spas, swimming pools and other water systems.  Specification:   Range: -1999 mV to 1999 mV Accuracy: ±5 mV Resolution: 1 mV LCD Display: 4 Digits Operating Temperature: 0 - 50C Calibration: By mini screwdriver (included)   Clear LCD with backlight. Compact and portable pen-type design. Easy to use and provides instant display of results.   Calibration Method:  1,Switch on the ORP Meter, and immerse the electrode in the distilled water for few hours. 2,  Immerse the electrode in 256mV calibration solution (4.01 calibration solution of quinhydrone reagent), stir the meter gently. 3, Wait till the reading is stabilized, and adjust the reading to 265mV by pressing the potentiometer with the screwdriver. 4,  Rinse the electrode with distilled water.   Package includes: 1 x ORP-2069 Digital Pen-type Redox Tester 1 x Mini Screwdriver 1 x Instruction Manual   Details pictures: 

Intellinet PoE+ Tester - Power over Ethernet Plus Test Tool; Detects Endspan, Midspan, IEEE802.3af- and IEEE802.3at, Retail Box, 2 year Limited Warranty. Product Overview: The Intellinet PoE+ Tester is a Power over Ethernet detector that confirms 802.3af and 802.3at connections. It also identifies the existence and type of Power Sourcing Equipment (either Endspan or Midspan). This tester is a simple plug-and-play tool that allows the installer to correctly identify PoE or PoE+ without the risk of damaging expensive equipment. Features: • Detects IEEE802.3af and IEEE802.3at • Tests for both Endspan and Midspan power • Compact design Specifications: • Product Code: 780131 • Description: Intellinet PoE+ Tester - Power over Ethernet Plus General • Detection of IEEE802.3af and IEEE802.3at • Detection of PSE (power sourcing equipment) type • Plug and Play • Simple and effective Dimensions • 27.94 (L) x 33.02 (W) x 68.58 (H) [mm] o (L) x 1.3 (W) x 2.7 (H) [in] Package Contents • PoE+ Tester • 1 x 10 cm (3.94 in.) RJ45 to RJ45 cable • Instruction manual

Description:     GM1352 Digital LCD Sound Level Meter Noise Tester Noise Measuring Instrument Decibel Monitoring Diagnostic Tool This meter is featured with wide measuring range (30-130dB). It's portable and easy to use and a handy instrument for sound quality control in factory, office, home, school and construction site.     Features:   LCD backlight for clear reading. Wide measuring range: 30-130dB. Sound level measurement. Min./Max./Lock current value. Hold the measurement data. Manual/auto shutoff. Equipped with sponge ball. Portable and easy to use,suitable for sound quality control in factory, office, home, school and construction site.   Specifications:   Measuring Range: 30-130dBA Accuracy: ±1.5dB Resolution: 0.1dB Frequency Response: 31.5Hz to 8KHz Frequency Weighting Features: A Weighting Display: LCD Display Power Supply: 3 x 1.5V AAA Batteries(Not included)   Operation Environment: 0-40°C 10-80%RH Storage Environment: -10-60°C 0-90%RH Dimension: 50 x33 x160mm / 1.97 x1.3 x6.3in  Weight: 82g / 2.92oz Package Size: 21 x15 x6cm / 8.3 x5.9 x2.36in  Package Weight: 130g / 4.59oz   Package included:   1 x Sound Level Meter 1 x Sponge Ball 1 x User Manual (English) Details pictures:  

 Hitachi Insulation Tester is in very good working condition !!!!!! Please don't bid if you don't intend paying !!!!! Payment within 48 hours please !!!! Shipping is done on Saturdays.               IF YOU NEED COURIER SERVICE PLEASE ASK FOR A QUOTE ??

Description:   Network Cable Tester for Cat5 RJ45 RJ11 RJ12 Ethernet Lan PC Wire Testing Tool   Features:    Extremely easy to use and understand 9 LEDs to indicate which wire whether open or not on both remote and master unit. Test correspondingly double-twisted cables 1, 2, 3, 4, 5, 6, 7, 8 and Ground. Capable to judge wrong connection, short circuit and open circuit. Transmitter and receiver snap together for transport or patch cable testing. Transmitter and receiver each have one RJ-45 jack and one BNC jack. Automatic efficient scan for the miss wiring, disorder cable, open and short circuit. Separable transmitter and receiver to test installed cabling or patch cables. Standard cable wiring diagrams are printed on the transmitter unit. Protective power switch for low power consumption. High quality soft leather case provides more secure protection.   Specification:   Total Size: 105 x 100 x 28mm Main tseter Size: 105*67*28mm Remote tester Size: 105*28*28mm Operate with one 9V battery (Not Included)         Package includes:    1 x Cable Tester 1 x Manual 1 x Soft leather case   Details pictures:     

Digital LCD TDS Water Quality Meter Tester Filter Purity Pen Stick 0-9999 PPM    Specifications: 1.Measurement range: EC:0—9990Ous/cm;  TDS:0-9990ppm;  Dearees Celsius: 0.1-80.0 Celsius;  Fahrenheut:32.0-176.0  Accuracy: ±2% 2.Size: 154mm*30mm*14mm 3.Color: White Features: 1.This is a digital TDS meter tester to test the filter water quality purity, to check the performance of your water filter, to check for hardness (1grain=17ppm),to make sure you always drink pure water.Saves measurements for convenient reading and recording New Arrival 2.Auto-off function: turns off meter after 5 minutes of non-use to conserve batteries 3.Automatic temperature compensation 4.Shift between TDS and Conductivity 5.Can be used in: Water purifiers and filters, food(vegetable, fruit)&drink quality monitoring, pools and spas, aquarium, hydroponics   How to use it: 1,Please unplug the electrode sleeve before use 2.Press the switch,place the electrode into the test  solution. 2.After the numerically stable,press the HOLD button and take it out of the solution to read. 4,After reading,turn off the meter,wipe clean the electrode  before sleeving it.   Note: 1.keep the electrode clean,cover the electrode protective sleeve,please take out the batteries for long periods idle. 2.This product requires a 3V CR2032 button battery, but We  do not provide it,please kindly note. Package included: 1 X Water Quality Tester 1 X User Manual 1 X Free Leather Bag

Description: Network Cable Tester for Cat5 RJ45 RJ11 RJ12 Ethernet Lan PC Wire Testing Tool Features: Extremely easy to use and understand 9 LEDs to indicate which wire whether open or not on both remote and master unit. Test correspondingly double-twisted cables 1, 2, 3, 4, 5, 6, 7, 8 and Ground. Capable to judge wrong connection, short circuit and open circuit. Transmitter and receiver snap together for transport or patch cable testing. Transmitter and receiver each have one RJ-45 jack and one BNC jack. Automatic efficient scan for the miss wiring, disorder cable, open and short circuit. Separable transmitter and receiver to test installed cabling or patch cables. Standard cable wiring diagrams are printed on the transmitter unit. Protective power switch for low power consumption. High quality soft leather case provides more secure protection. Specification: Total Size: 105 x 100 x 28mm Main tseter Size: 105*67*28mm Remote tester Size: 105*28*28mm Operate with one 9V battery (Not Included) Package includes: 1 x Cable Tester 1 x Manual 1 x Soft leather case Details pictures:

Features: Size: Approx. 16x8.6x2.6cm/ 6.30x3.39x1.02" Open. short wire testing 9V Alkaline battery powered (Not included) Clear reading for wire status Can test RJ11/ RG45/ USB Fast speed in testing BNG terminator 25 Ohm/ 50 Ohm indications Straight or crossover indication Battery good or battery low indication LED clear indications RJ11/ RG45 are equipped with 50u" gold plating Fast reaction during rest process Max. cable length: 1000ft Package includes: 1 x 4-in-1 Network Cable Tester 1 x Carrying bag 1 x English Instruction Manual Details pictures:

WHDZ MD812 Digital Wood Moisture Meter Humidity Tester Timber Damp Detector Descriptions: WHDZ MD812 digital wood moisture meter can quickly determine the moisture content of wood with large-screen display. Also can keep the current test data, in order to read after test. Features: Measuring range: 5-40% Ability to store data and measured values in memory. Low power indicator modular sensor pins. Ability to select 2-pin or 4-pin sensor. Ideal for use in woodworking, building construction and agriculture industries. Ideal for locating moisture in carpets and sub-flooring. Power supply: 1 x 6F22 9V battery (Not included) Package weight: 0.189 kg Product Size(L x W x H): 13.00 x 6.50 x 2.50 cm / 5.12 x 2.56 x 0.98 inches Package Size(L x W x H): 16.00 x 10.00 x 5.20 cm / 6.3 x 3.94 x 2.05 inches Package Included: 1 x WHDZ MD812 Digital Wood Moisture Meter 1 x Bag 1 x English User Manual Detail Pictures: WHDZ MD812 Digital Wood Moisture Meter Humidity Tester Timber Damp Detector

Specification: USB female port output. QC 2.0 5V/9V/12V trigger voltage. Supports Manual mode and Auto mode. Manual mode: Short press for trigger voltage switch. Auto mode: Long press enter auto mode, trigger voltage will repeat in the sequence of 5V to 9V to 12V. For test charger and power bank that support QC2.0 output. Package included: 1 x QC 2.0 test board Detail Pictures:

Description:  Digital LCD Indoor Outdoor Thermometer Temperature Tester Clock with Wireless Sensor    Features: Top quality. Indoor Outdoor temperature (°F or °C) Min. and max.record of temperture. Clock display,12 or 24 hour time mode. Synchronized instant reception. Crescendo Alarm.   Specifications:   Indoor temperature range: -20°C ~ +60°C Remote temperature range: -40°C ~ +65°C Temperature accuracy: +/-1.0°C Quartz time accracy: +/-1.0s per day Power requirements (receiver): 2 x "AAA" alkaline batteries (Not included) Power requirement (remote): 2 x "AAA" alkaline batteries (Not included)   Transmission frequency: 433.9MHz Transmission range: up to 30 meters (100 feet) in free open air Alarm Sound level: 60~65db with 20cm distance from back Size(receiver): 7.5cm(L)x 6cm(W) x 1.8cm(H){ about 3'' x 2.4'' x 0.7''} Size(sensor): 6.5cm(L) x 4.8cm(W) x 2.8cm(H) { about 2.5'' x 1.9'' x 1.1''}   Package Included:   1 x Thermometer 1 x Remote Sensor 1 x Instruction Manual Details pictures:    

Description: High Accurate 200,000 Lux Digital Light Meter Tester Photometer Luxmeter Specifications: Color: Red Repeatability: ±2% Size  (L x W x H): 108 x 60 x 32mm  Temperature Characteristic: ±0.1%/??br />Resolution: 1 LUX x 0.1FC  Photo Detector: One silicon photo diode with filter Measurement Range: 1-200,000LUX  Power Sourse: 2 x AAA Batteries Measurement Speed: 2 times/sec  Photo Detector Dimensions (L x W x H): 92 x 56 x 32mm Accuracy: ± 4% ±10dgts(Weight: 145g Package includes: 1 x Digital Light Meter 2 x AAA Batteries 1 x User Manual Details pictures:

Description: 3 Phase Meter Sequence Presence Rotation Indicator Tester The instrument was designed to check the phase sequence. And at the same time, it has LEDs to show you if the phase is open or not. Can easily involve the terminals of the control panel to be tested, guaranteeing reliability and safety. it can check a large range of 60V to 600V AC three-phase. The instrument guarantee high reliance and performance. Small, light and portable. It was designed to facilitate the operation to the maximum. Front Panel: Color: black with orange side Dimension: 85 x 64 x 23mm Net Weight: approx 142g Open phase indicator LED-3 orange LEDs. Phase sequence indicator LED-Green for correct phase sequence, Red for reverse phase sequence. Band: Hitch on wrist to avoid the meter falling Test lads-Red for R phase(L1.R), Yellow for Y phase(L2. S), Green for B phase(L3.T) Specifications:  Operation Voltage: 60V~600V AC three phase. Limit Support Voltage: 2000V/minute (impulse voltage 4000V) Operation Frequency Range: 20Hz~400Hz Limit time for Continuous Use: 60 minutes maximum at 60V AC, 4 minutes maximum at 600V AC Test leads: Double insulation, with approximately 1 meter length. Package included: 1 x Main unit with test leads 3 x Alligator clips 1 x English Instruction manual 1 x Zippered blue carrying case Details pictures:

Description: Cond-2013 Portable Pen Digital EC Meter Tester Water Quality Purity Meter Monitor Automatic Temperature Conductivity    This EC meter is a device to measure the electrical conductivity in a solution with measuring range 0 - 1999 μs/cm. Electrical conductivity measures ability of a material to conduct electric current. The lower the EC levels, the higher the purity of water is. The commonly measured unit in EC is microSiemens per centimetre (μs/cm).   Electrical conductivity is correlated with purity and quality of water. This meter is also equipped with Automatic Temperature Compensation (ATC) for more accurate measurements. The backlight LCD equipped enables users to do testing and measurement even in dark fields.   It is a very useful meter to measure water quality for various industries and applications such as water sources, environmental monitoring, hydroponics, aquariums, water hardness, swimming pools, laboratories, etc.   Features:   Compact & pen-type design. Easy to use and provides a quick measurement. Wide range 0 ~ 1999 μs/cm for various applications. High accuracy of ± 2% full scale. Large and clear LCD display with backlight. Built with Automatic Temperature Compensation (ATC).   Specifications:   Measuring range: 0.00 ~ 1999 μs/cm Resolution: 1 μs/cm Accuracy: ±2% Full Scale (F.S.) LCD Display: 4-digits Automatic Temperature Compensation: 0 ~ 50 °C (32 ~ 122 °F) Operating Temperature: 0 ~ 50 °C (32 ~ 122 °F) Power supply: 4 x 1.5 V (AG13) Button Cell Batteries  Dimensions: approx. 151 (L) x 33 (W) x 20 (D) mm (5.94' x 1.30' x 0.79' inch) Weight: approx. 53g (with batteries included)   Package  Includes:   1 x EC Meter 1 x Mini Screwdriver 4 x 1.5 V (AG13) Button Cell Batteries 1 x Instruction Manual Standard Factory Package Details pictures:

Description:   HT-80A Digital Sound Pressure Tester Level Meter 30~130dB Decibel Noise Measurement   Features:   1.Comes with compact and lightweight design, designed to fit comfortable in your palm. 2.Measurement Range: 30dBA~130dBA, Accuracy Within +/-1.5dB; Resolution: 0.1dBA. 3.Data hold function; Large LCD screen display. 4. Max/Min sound level measurement. 5.Perfect for measuring noise levels in factories, offices, theaters and audio systems to give you accurate readings in a greater range than similar products in the market.   Specification:   1. Auto Power off: After 15 minutes with disable feature 2. Memory Recall: Record and Recall MAX and MIN readings 3.Level Range: 30-130dB 4.Accuracy: +3.5dB (ref 94dB @1kHz) 5.Frequency Range: 31.5Hz to 8k Hz 6.Battery Type: 9V battery(NOT included) 7.Operation Temp: 0 C -40C (8.Storage Temp: -10 C ~60C (Package Included:   1x HT-80A Digital Sound Level Meter(battery is not inlcuded) 1x English User Manual Note: The battery is not included. Details pictures: 

Description: 0-10mm Leather Thickness Gauge Measure Tester Leather Craft Tool Accuracy 0.1mm   Item Specifics: Measuring range: 0-10(mm) Range: Leather/ paper Accuracy: 0.1mm   Features: Small and easy to carry, can be used to measure jewelry, leather, metal sheets, paper, thin film, wire and similar materials.Accurate measurement, easy to operate.   Package Included: 1x Leather Thickness Gauge   Note: 1.Please allow 1-3cm error due to manual measurement. Please make sure you do not mind before you bid. 2.The colors may have different as the difference display, please understand. More details:

Description: The cable tracker is designed to identify and trace wires or cables within a group without damaging the insulation. For telephone line, it can identify some state in the line, and more convenience to install, debug, maintain telephone line. There is a transmitter and a receiver included in the cable tracker.     Features: Judge continuity of the cables or wires Track the cables or wires, and diagnose the break point Receiver the tone signal on the cables or wires (telephone line) Identify the state in the working telephone line (clear ring, busy) Send a single solid tone or a dual alternating tone to the object cables or wires     Specification: Send tone frequency: 1.5kHz Receive frequency range: kHz Power supply: 6F22 (9V)(Battery is NOT included)     Package include: 1x Transmitter 1x Receiver 1 x Black Carrying Bag 1 x Instruction Manual                  

Descriptions:   WHDZ MD812 digital wood moisture meter can quickly determine the moisture content of wood with large-screen display. Also can keep the current test data, in order to read after test.   Features:   Measuring range: 5-40% Ability to store data and measured values in memory. Low power indicator modular sensor pins. Ability to select 2-pin or 4-pin sensor. Ideal for use in woodworking, building construction and agriculture industries. Ideal for locating moisture in carpets and sub-flooring. Power supply: 1 x 6F22 9V battery (Not included) Package weight: 0.189 kg  Product Size(L x W x H): 13.00 x 6.50 x 2.50 cm / 5.12 x 2.56 x 0.98 inches  Package Size(L x W x H): 16.00 x 10.00 x 5.20 cm / 6.3 x 3.94 x 2.05 inches   Package Included: 1 x WHDZ MD812 Digital Wood Moisture Meter  1 x Bag 1 x English User Manual Detail Pictures:

Features: 1. Safe means of measuring human body temperature through the ear. 2. Great for babies and all family members. 3. Fast one second reading time. 4. Large easy-to-read digital display. 5. Instant and continuous for use. 6. Automatic shut off in one minute non operated. 7. Beeper function. 8. Comes with a carrying bag. 9. 100% brand new and high quality. Specifications: 1. Memory: 10 memories 2. Display Range: 34.0°C-44.0°C 3. Accuracy: ±0.2°C 4. Mini Scale: 0.1°C 5. Taking Time: One second 6. Battery: Lithium battery (CR2032) 7. Color: White 8. Size: 115 x 35 x 35mm/4.5 x 1.4 x 1.4in Package Inclued: 1 x Ear Infra-Red Thermometer 1 x User Manual 1 x Bag Detail Pictures: