Superlux kick drum microphone

  Superlux Kick Drum Microphone T he PRA218A kick drum microphone is specially designed for a full warm sound and high SPL capability, making it suitable for other bass band or high SPL instruments. It has a permanently attached microphone clip. Features     Specially designed for kick drum and bass drum.     High SPL capacity up to 134 dB     Sturdy metal body.     Durable, reliable professional performance.     High energy neodymium magnet increase the output level Specifications     Type: Dynamic     Polar Pattern: Supercardioid     Frequency Response: 20-12,500 Hz     Sensitivity: -53 dBV/Pa (2.2 mV)     Output Impedance: 500 Ω     Min. Load Impedance: 500 Ω     Max.SPL: 134 dB SPL     Finish: Black     Connector: XLR3M     Dimensions: Ø43 × 120 mm     Net Weight: 210 g (7.4 oz)

Shure - PG52XLR Dynamic Kick Drum Microphone A high-performance cardioid dynamic kick drum microphone tuned to capture low-end punch. The PG52-XLR includes an integrated stand mount, 15ft (4.57m) XLR to XLR cable, 5/8" to 3/8" thread adapter, and a storage bag.

The half-cardioid e 901 is the perfect condenser microphone for kick drum It is highly robust and step-resistant. It benefits from an integrated preamp. TEC Award Winner for Outstanding Technical Achievement in the category Microphone Technology/ Sound Reinforcement - the Sennheiser e900 Backline Series. m.i.p.a. award Best drum microphones: evolution 900 Series Features Frequency response optimized for kick drum Very fast attack Integrated preamp and gold-plated standard XLR plug, no need for special adapter cable No microphone stand needed for kick drum applications Handles very high sound pressure levels Slip-free, dampening rubber pad underneath Delivery Includes Pouch User ManualDimensions x 105 x 26,5 mm Connector XLR-3 Transducer principle (Microphone) pre-polarised condenser microphone Frequency response Hz Weight 550 g Pick-up pattern half-cardioid Sensitivity in free field, no load (1kHz) 0,5 mV/Pa Nominal impedance Min. terminating impedance Ω Phantom powering 48 V / 1,1 mA Max. Sound pressure level (aktiv) 154 dB/SPL

Frequency response optimized for kick drum Very fast attack Exceptionally clean and clear pick-up of the deepest bass signals Integral stand mount Hum compensating coil Shock mounted capsule Robust metal body Technical Data Transducer principle (Microphone) dynamic Pick-up pattern cardioid Frequency response Hz (See picture for frequency curve) Sensitivity in free field, no load (1kHz) 0,2 mV/Pa; (60 Hz): 0,6 mV/Pa Nominal impedance 350 Ohm Min. terminating impedance Ohm Connector XLR-3 Dimensions x 60 mm Weight 440 g Dimensions x 60 mm Connector XLR-3 Transducer principle (Microphone) dynamic Frequency response Hz Weight 440 g Pick-up pattern cardioid Sensitivity in free field, no load (1kHz) 0,2 mV/Pa; (60 Hz): 0,6 mV/Pa Nominal impedance 350 Ω Min. terminating impedance Ω

Frequency response optimized for kick drum Very fast attack Exceptionally clean and clear pick-up of the deepest bass signals Integral stand mount Hum compensating coil Shock mounted capsule Robust metal body Technical Data Transducer principle (Microphone) dynamic Pick-up pattern cardioid Frequency response 20...16000 Hz (See picture for frequency curve) Sensitivity in free field. no load (1kHz) 0.2 mV/Pa (60 Hz): 0.6 mV/Pa Nominal impedance 350 Ohm Min. terminating impedance 1000 Ohm Connector XLR-3 Dimensions 128.5 x 60 mm Weight 440 g

5 piece Drum Microphone Package Comprising the following Microphones: 1 x KM-8.0 Low-Frequency Instruments 4 x KM-8.1 Drum & Brass Instruments KM-8.0 Low-Frequency Instruments — Tailored frequency response is smooth and extended. Tuned specifically for kick drum applications. — Cardioid polar pattern picks up the most sound from in front of the microphone and some sound from the sides. Less susceptible to feedback in high volume settings. — Dynamic cartridge has a simple, rugged coil. Handles extreme volume levels without distortion. — Cartridge includes a neodymium magnet for high output level. — Internal shock mount for reduced handling noise. — Durable metal construction. — Integral stand mount. — Hardened steel mesh tapered grille that resists wear and abuse. Microphone Type: Dynamic (moving coil) Polar Pattern: Cardioid (unidirectional) Frequency Response: 30 to Hz polarity positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of microphone output connector Output Impedance (at Hz): 300 ohms Sensitivity (at Hz): -55dBV/Pa, (1.8mV), 1 Pascal=94dB SPL Electromagnetic Hum Sensitivity: 25dB equivalent SPL in a 1 millioersted field (60Hz) Connector: Three-pin professional audio connector (male XLR type) Case: Die cast metal housing, back matte finish; hardened silver colored, tapered steel mesh grille; built-in locking stand adapter Environmental Conditions: This microphone operates over a temperature range of -29 to 57 degrees Celsius (-20 to 135 degrees Fahrenheit), and at a relative humidity of 0 to 95% Warranty Type: Manufacturer 12 Months Warranty. All goods are subject to supplier discretion Replacement Guarantee: 30 Days: All goods are subject to supplier discretion Free delivery on orders over a R in Gauteng. Delivery 1-3 days depending on area

The D112 has earned a well-deserved reputation worldwide as the best kick drum microphone ever made. Heavy-footed drummers are thrilled with the D112´s ability to handle up to 160dB SPL without any distortion. The diaphragm has a very low resonance frequency to maintain a solid and powerful response below 100Hz. A narrow band presence boost at 4kHz punches through dense mixes with forceful impact - no additional EQ needed! The D112 is also an excellent choice for use with bass cabinets and trombones For all styles of music a D112 is a must buy ….. General Polar Pattern cardioid Audio Frequency bandwidth 20 to Hz Sensitivity 1.8 mV/Pa Electrical Impedance 200 Ohms Recommended Load Impedance Ohms Polar Pattern cardioid Audio Frequency bandwidth 20 to Hz Sensitivity 1.8 mV/Pa Electrical Impedance 200 Ohms Recommended Load Impedance Ohms

Hercules - MU-MS300B Kick Drum Mic Stand Tilt Shaft The Hercules MS300B Low-Profile Tilt Base Microphone Stand is equipped with a Quik-N-EZ Height Adjustment Lever that slides up and automatically locks into place for easy, instant adjustment. Simply press the lever to lower. Also features a Quik-N-EZ Mic Clip The Quik-N-EZ Mic Clip mounts with a flip of the lever and is rubber-lined for a secure grip. It fits all mic stands without top washers and accepts mic sizes: 20-35 mm. The Tilting Base with Swivel Legs give you a fully adjustable stand angle and swiveling legs that fit around other stands, drums and stage equipment. Perfect for tight spaces and difficult-to-reach spots.

4 piece Drum Microphone Package Comprising the following Microphones: 1 x KM-8.0 Low-Frequency Instruments 3 x KM-8.1 Drum & Brass Instruments KM-8.0 Low-Frequency Instruments — Tailored frequency response is smooth and extended. Tuned specifically for kick drum applications. — Cardioid polar pattern picks up the most sound from in front of the microphone and some sound from the sides. Less susceptible to feedback in high volume settings. — Dynamic cartridge has a simple, rugged coil. Handles extreme volume levels without distortion. — Cartridge includes a neodymium magnet for high output level. — Internal shock mount for reduced handling noise. — Durable metal construction. — Integral stand mount. — Hardened steel mesh tapered grille that resists wear and abuse. Microphone Type: Dynamic (moving coil) Polar Pattern: Cardioid (unidirectional) Frequency Response: 30 to Hz polarity positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of microphone output connector Output Impedance (at Hz): 300 ohms Sensitivity (at Hz): -55dBV/Pa, (1.8mV), 1 Pascal=94dB SPL Electromagnetic Hum Sensitivity: 25dB equivalent SPL in a 1 millioersted field (60Hz) Connector: Three-pin professional audio connector (male XLR type) Case: Die cast metal housing, back matte finish; hardened silver colored, tapered steel mesh grille; built-in locking stand adapter Environmental Conditions: This microphone operates over a temperature range of -29 to 57 degrees Celsius (-20 to 135 degrees Fahrenheit), and at a relative humidity of 0 to 95% Warranty Type: Manufacturer 12 Months Warranty. All goods are subject to supplier discretion Replacement Guarantee: 30 Days: All goods are subject to supplier discretion Free delivery on orders over a R in Gauteng. Delivery 1-3 days depending on area

  GENERAL — Tailored frequency response is smooth and extended. Tuned specifically for kick drum applications. — Cardioid polar pattern picks up the most sound from in front of the microphone and some sound from the sides. Less susceptible to feedback in high volume settings. — Dynamic cartridge has a simple, rugged coil. Handles extreme volume levels without distortion. — Cartridge includes a neodymium magnet for high output level. — Internal shock mount for reduced handling noise. — Durable metal construction. — Integral stand mount. — Hardened steel mesh tapered grille that resists wear and abuse. SPECIFICATIONS Microphone Type: Dynamic (moving coil) Polar Pattern: Cardioid (unidirectional) Frequency Response: 30 to 13,000 Hz polarity positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of microphone output connector Output Impedance (at 1000 Hz): 300 ohms Sensitivity (at 1000 Hz): -55dBV/Pa, (1.8mV), 1 Pascal=94dB SPL Electromagnetic Hum Sensitivity: 25dB equivalent SPL in a 1 millioersted field (60Hz) Connector: Three-pin professional audio connector (male XLR type) Case: Die cast metal housing, back matte finish; hardened silver colored, tapered steel mesh grille; built-in locking stand adapter Environmental Conditions: This microphone operates over a temperature range of -29 to 57 degrees Celsius (-20 to 135 degrees Fahrenheit), and at a relative humidity of 0 to 95% Net Weight: 470g

GENERAL — Tailored frequency response is smooth and extended. Tuned specifically for kick drum applications. — Cardioid polar pattern picks up the most sound from in front of the microphone and some sound from the sides. Less susceptible to feedback in high volume settings. — Dynamic cartridge has a simple, rugged coil. Handles extreme volume levels without distortion. — Cartridge includes a neodymium magnet for high output level. — Internal shock mount for reduced handling noise. — Durable metal construction. — Integral stand mount. — Hardened steel mesh tapered grille that resists wear and abuse. Please confirm stock availability before purchasing We are an authorized dealer of the best sound, dj equipment, studio equipment and lighting Free delivery anywhere in the country on orders over a R1000 Delivery 24-48 hours to all major cities 48-72 hours to outlying areas Warranty Type: Authorized Dealer 12 Months Warranty. All goods are subject to supplier discretion Replacement Guarantee: 30 Days: All goods are subject to supplier discretion Our Shop – Opening Soon Office F2 The Conservatory at Lakefield 106 Lakefield Avenue Lakefield Square Benoni Contact us at 110 - show phone - Tian - 718 - show phone - /Whatsapp Carlo - 844 - show phone - /Whatsapp Trading Hours: Monday - Friday 7:30am - 16:30pm Saturday 7:30am - 13:00pm If you can't find what you are looking for give us a call and we will gladly assist you

AKG P4 Dynamic Instrument Microphone Great for kick drums, bass cabinets and trombones The AKG P 4 dynamic cardioid instrument microphone boasts a solid metal case to handle typical stage use (and abuse). It features an integrated stand adapter and a mounting bracket for highly versatile use on drums, percussions, wind instruments and guitar amps. AKG P 4 Features: ¿ Dynamic microphone designed for drums and percussions, wind instruments and bass guitar amps as well as trombones ¿ Response tailored for neutral reproduction of instrument sounds ¿ Integrated stand adapter and external bracket ¿ Rugged all-metal body withstands typical tough stage use ¿ Humbucking coil rejects EMC noises ¿ Complete with carrying case

The e 602 II is a cardioid instrument microphone especially suitable for use with bass drums, bass guitar cabs, tubas and other low frequency instruments Features Rugged, lightweight aluminium body for stable positioning on long microphone boom arms Lightweight high-performance voice coil construction Fast transient response Low frequency extension Ideal for direct use on the most problematic bass signal Frequency-independent directivity provides isolation from other on-stage signals Humbucking coil Integral stand mount Delivery Includes 1 e 602-II 1 pouch Instructions for useDimensions 60 x 153 mm Connector XLR-3 Transducer principle (Microphone) dynamic Frequency response Hz Weight 318 g Pick-up pattern cardioid Sensitivity in free field, no load (1kHz) 0,25 mV/Pa; (50 Hz) 0,9 mV/Pa Nominal impedance 350 Ω Min. terminating impedance Ω

The e 602 II is a cardioid instrument microphone especially suitable for use with bass drums. bass guitar cabs. tubas and other low frequency instruments Features Rugged. lightweight aluminium body for stable positioning on long microphone boom arms Lightweight high-performance voice coil construction Fast transient response Low frequency extension Ideal for direct use on the most problematic bass signal Frequency-independent directivity provides isolation from other on-stage signals Humbucking coil Integral stand mount Delivery Includes 1 e 602-II 1 pouch Instructions for use

GIMME SOME BASS for kick drum, deep brass and bass amp miking The Perception P2 high-performance dynamic bass microphone delivers a profound, high-energy low end for use on kick drums, trombones and bass amps. Its cardioid polar pattern reduces feedback and crosstalk coming from other instruments behind the microphone. The Perception P2 comes in a rugged, all-metal housing to withstand tough on-the-road conditions. An integrated stand adapter makes the microphone very easy to use. The package also includes a carrying case for safe transport and storage.Powerful sound with profound bass range especially tuned for low-pitched instruments High-performance capsule withstands extreme sound pressure levels Built-in hum compensation coil rejects EMC noise for the cleanest sound Rugged wire-mesh cap and sturdy die-cast metal body withstand tough day-to-day stage use Integrated stand adapter for easy mounting on mic stand