Studio mic shock mount

Studio Mic Shock Mount Holder For Large Diaphram Condenser Mic Clip Description: This is a very nice shock mount for most large diaphragm condenser microphones Standard 5/8"-27 thread with a 3/8"-5/8" screw adapter, so you can mount it on all the standard microphone stands Features an angle adjustment with locking knob The shock mount fits microphone diameter ranging from 4cm - 5cm/ 1.57" - 1.97" Material: Plastic Color: Black Note: Shock Mount Only, Microphone is not included. Package Included: 1 x Microphone Shock Mount

46mm Mic Shock Mount Stand Holder Mount Clips for Studio Sound Recordings

Aluminium Alloy Studio Microhpone Shock Mount Holder, Suitable for Microhpones from 43-48mm in Diameter

Specification: Polar Pattern: Uni-directional Frequency Response: 20Hz-20kHz Sensitivity: -43dB±2dB Output Impedance: 150Ω±30%(at 1kHz) Load Impedance: ≥1000 Ω Equivalent Noise Level: 16dBA Electrical Current: 3mA Usage Voltage: 48V phantom power supply Wire: 2.5 meters long Microphone Body Weight: 225g Package Weight:1.4kg Microphone Size: Approx. 150x45x45mm/5.9x1.7x1.7inch Package Size:400x160x90mm /15.7x15.7x3.5inch Microphone Material: Steel Features: The professional condenser microphone adopts the exacting complete electronic circuit control. Capture rich, full-bodied sound from sources that are directly in front of the mic. Shock Mount to reduce handling noise, ideal for radio broadcasting studio, voice-over sound studio, recording. With Standard screw adapter, you can mount the Mic Shock Mount on all the standard microphone stands. Provide vocal intelligibility, crispness and Neodymium magnet for high signal-to-noise ratio. The Condenser Microphone only works with the device that could provide enough power(48V phantom power supply). The set Suitable for studios,broadcasting stations and stage performances, in sound reinforcement or recording, to pick up voice or instruments, indoors or outdoors. Its a perfect gift for your lover, family, friend and coworkers who love singing. Package Included: 1 x Black Microphone 1 x Shock Mount 1 x Power Cord 1 x Anti-wind Foam Cap 1 x User Manual

Microphone Shock Mount Clip Holder For MXL Large Diameter Condenser MIC   Product Introduction: Studio Microphone Shock Mount fits most large diaphragm condenser mics. The shock mount's angle adjustment includes a locking knob and the mount attaches to any microphone boom Product Feature: Can be as a very nice replacement shock mounts for most large diaphragm condenser microphones Die-cast steel adapter with standard UN 5/8 threads Features an angle adjustment with locking knob Felt/foam insert to hold and protect microphone Fits most 43mm-50mm Microphones   Product Specification: Color: Black,Silver Material: Metal Please note: Colour will send at random, please only purchase if you have no problem with this.   Package Content: 1*Microphone Shock Mount Clip Holder  

Shock mount with metal pop filter Shock mount's inner diameter:4cm Fit for microphone's diameter: 2.5~3.8cm With extra elastic band for replacing Aluminum alloy and steel stainless golden pop filter Special for your handheld condenser microphone The distance from Pop filter to shock mount can be adjusted Rotatable clamp for the best angle NOTE:The microphone not included Package included: 1 x shock mount with metal pop filter

hybrid c1 condenser studio mic package consists of:1x c1 condenser microphone1x wind-proof shield1x shock mount holder1x 3m, xlr-xlr mic...137409639

hybrid c1 condenser studio mic package consists of:1x c1 condenser microphone1x wind-proof shield1x shock mount holder1x 3m, xlr-xlr mic...137407188

hybrid c1 condenser studio mic package consists of:1x c1 condenser microphone1x wind-proof shield1x shock mount holder1x 3m, xlr-xlr mic...137411271

Buy On-Stage MY420 Shock Mount for Studio Microphones for R175.00

Buy BM800 Condenser Microphone Dynamic System Kit Shock Mount Boom Stand Studio Pro for R1,228.23

Citronic - Pop Screen With Shock Mount Suspension shock mount that will support larger diameter microphones, providing isolation from external physical factors that may cause unwanted sound. An integrated pop screen is included, ideal for studio recording.

Cardioid pickup pattern Large, dual-layer 19mm diaphragm Heavy gauge mesh grill Gold-plated XLR connector LED indicates 48V phantom power Smooth, flat frequency response Swivel stand mount Optional SP01 Spider Shockmount In case, excellent condition Welcome to view at Cash Crusaders Kabega Or contact Luntu (0413609140)

BM700 Condenser Microphone Dynamic Recording with Shock Mount Package weight: 0.52 kg BM700 Condenser Microphone Dynamic Recording with Shock Mount Features: Large condenser microphone element for warm, rich recordings. Cardioid pick-up pattern minimizes background noise and isolates the main sound source. Smooth, extended frequency response is excellent for singing, speech and instruments. Overload-protection switch (-10dB) minimizes distortion from loud sound sources. Bass-reduction switch reduces room noise. Frequency Response: 20Hz-16KHz Size: Approx. 15 x 5 x 4.5cm/5.91 x 1.97 x 1.77inch Length of cable: Approx. 2.53m/99.61inch Mic Shock Mount: Features an angle adjustment with locking knob Foam insert to hold and protect microphone Standard 3/8" screw adapter, you can mount it on all the standard microphone stands Ideal for radio broadcasting studio, voice-over sound studio, recording and so on Material: Metal Bearable load: 3KG Fit for microphone diameter: 43-50mm Package: 1x Microphone 1x Power Cord 1x Anti-wind foam cap 1x User Manual 1 x Shock Mount (Sorry that the holder is not included.) Click here for more deals BM700 Condenser Microphone Dynamic Recording with Shock Mount BM700 Condenser Microphone Dynamic Recording with Shock Mount

Key Features: Adopts electronic circuit control and gold-plated diaphragm capsule, highlight texture. Designed to minimize background noise and isolate the main sound source. Wide frequency response (20Hz-20KHz) makes vocal performances sound clear, natural and vibrant. 3.5mm stereo plug fit for most PC. Shock mount of metal construction is designed with foam inside for protecting mic. Foam cap reduces noise to ensure clearer sound. Ideal for radio broadcasting studio, voice recording, karaoke and so on. Important Notes: This is a condenser microphone only work with the device that could provide enough power for it.  When connected with desktop computer, the condenser microphone could be used alone. When connected with laptop computer, please connect the laptop to electrical outlet, or use a 48V phantom power to get enough power if the sound is not clear and high enough. If your device could not provide enough power(When used with Amplifier or Mixer,etc.), the sound volume recorded might be low, and please use a extra 48V phantom power adapter to connect it.(phantom power adapter is not included). Can not be used with mobile phone and tablet computer. If you want better sound effect, a sound card could be used. When recording, please put the microphone away from the amplifier to prevent recording noise due to amplifier. Package Contents:  1 x Condenser Sound Recording Microphone  1 x Plastic Shock Mount Kit  1 x Anti-wind Foam Cap  1 x Audio Connect Cable  1 x English Manual General Brand KICCY Quantity 1 set Material Steel net + Zinc alloy hand holding part Specification Interface 3.5mm Powered By Power Free Microphone Frequency Response 20Hz~20KHz Sensitivity 45dB+1dB Mic Polar Patterns Unidirectional Impedance 16ohm Packing List 1 x Condenser Sound Recording Microphone 1 x Plastic Shock Mount Kit 1 x Anti-wind Foam Cap 1 x Audio Connect Cable 1 x English Manual

Condenser Microphone Mic Sound Studio with Recording Tripod Shock Mount Description: Product name: Microphone Color: Black, white, gold Size: Approx. 13x4cm/5.11"x1.57" Sensitivity: -55dB ± 2dB Sensitivity range: within -3dB Operating voltage: 1.5V Frequency response: 50Hz-16KHz SNR:> 36dB Cord length: Approx. 2m/78.7" Features: -Recordable condenser microphones. -3.5 stereo plug apply: 1 Network singing 2. Network audio 3. Web chat 4. Network Video Conference 5. Network Gaming Technology -Low noise, for a variety of plug 3.5 speakers. -High-quality microphone, hi-fi audio system. With the tripod, set up easily and quickly. -Frosted surface, perfect texture, overall reveal a stylish novel. -Lightweight and smooth diaphragm to provide full and accurate natural sound. Package Included: 1 x Microphone

Specification: 1. Microphone-core: Dia. 16mm 2. Polar Pattern: Uni-directional 3. Frequency Response: 20Hz-16kHz 4. Sensitivity: -38dB±2dB 5. Output Impedance:150Ω±30%(at 1kHz) 6. Load impedance: ≥1000 Ω 7. Equivalent Noise level: 16dBA 8. Electrical current: 3mA 9. Microphone body weight: 316g 10.Dimension: Approx. 15 x 5 x 5cm/6.3 x 1.97 x 1.97inch 11.Cable length: Approx. 2.9m/9.5feet 12.Microphone Material: Steel net + Zinc alloy hand holding part 13.Color: Black Features: * Tailored frequency response provides vocal intelligibility and crispness * Neodymium magnet for high signal-to-noise ratio * Shock Mount to reduces handling noise * Cardiod (Bi-directional) pickup pattern suppresses feedback * Ideal for radio broadcasting studio, voice-over sound studio, recording and so on Package Included: 1x Black Microphone 1x Shock Mount 1x Power Cord 1x Anti-wind foam cap 1x User Manual

BM-800 Pro Condenser Dynamic Microphone Mic Sound Audio Studio Recording with Shock Mount

The sE5 is the latest and best incarnation of our sE small-diaphragm microphone series. We've listened to our users' opinions and added more of what you need, and less of what you don't Introducing the sE5, our newest small-diaphragm condenser microphone. We've taken the sE5's predecessor, the sE4, and redesigned it from the capsule right through to the chassis. sE5 sets the new standard for small diaphragm microphones at its price, and is perfect for studio and live use The sE5 improves upon the high-quality performance of the sE4 with a smooth, full-range frequency response and excellent transient handling. It is the perfect choice for recording drums, percussion, pianos and any stringed acoustic instrument. Finished in matte black, the sE5 features a cardioid polar pattern, 100Hz bass cut and -10/-20db pad switches. It also includes a custom shock mount so you're ready to capture high quality recordings straight out of the box.   Cardioid Polar Pattern The sE5's cardioid polar pattern delivers a clean and smooth on-axis response, with off-axis rejection that's essential when recording the source instrument in-situ among unwanted noise sources such as other instruments or room ambience.   100Hz Bass Cut The sE5's 100Hz bass cut can be applied to decrease the level of proximity effect, which is typical behaviour in cardioid pattern microphones if placed very close to the sound source, or to isolate from low frequency rumble from other sources.   -10dB/-20dB Pad The two pad switches can be used if you're recording a very 'hot' or loud signal. For miking up loud sound sources such as drums or a guitar cabinet, the -10dB or -20dB settings will reduce the level output from the microphone to the connected microphone preamp, ensuring a high quality signal is delivered.   Matte Black Finish The matte black finish minimises the level of attention drawn to the microphone when used on stage or in the studio, allowing it to blend into the background.   Includes Custom sE5 Shock Mount

IN STOCK AND READY TO SHIP   Key Features:  Adopts electronic circuit control and gold-plated diaphragm capsule, highlight texture.  Designed to minimize background noise and isolate the main sound source.  Wide frequency response (20Hz-20KHz) makes vocal performances sound clear, natural and vibrant.  3.5mm stereo plug fit for most PC.  Shock mount of metal construction is designed with foam inside for protecting mic.  Foam cap reduces noise to ensure clearer sound.  Ideal for radio broadcasting studio, voice recording, karaoke and so on. Important Notes: This is a condenser microphone only work with the device that could provide enough power for it. When connected with desktop computer, the condenser microphone could be used alone. When connected with laptop computer, please connect the laptop to electrical outlet, or use a 48V phantom power to get enough power if the sound is not clear and high enough. If your device could not provide enough power(When used with Amplifier or Mixer,etc.), the sound volume recorded might be low, and  use a extra 48V phantom power adapter to connect it.(phantom power adapter is not included). Can not be used with mobile phone and tablet computer. If you want better sound effect, a sound card could be used.  When recording, please put the microphone away from the amplifier to prevent recording noise due to amplifier.   Specification Type: Wired Polar Pattern: Uni-directional Frequency Range: 20Hz-20kHz Sensitivity: 45dB±1dB S/N: 60dB Compatibility: Linux, Windows 2000, Windows 7, Windows XP, Windows 98, Windows Vista, Windows 98SE, Mac OS, Windows ME Application: Radio Broadcasting Studio, Karaoke, Voice Recording etc. Product Weight: 0.350 kg Package Weight: 0.440 kg Product Size (L x W x H): 5.0 x 5.0 x 16.0 cm / 1.97 x 1.97 x 6.29 inches Package Size (L x W x H): 15.0 x 10.0 x 4.0 cm / 5.90 x 3.93 x 1.57 inches Package Contents: 1 x BM-800 Condenser Sound Recording Microphone, 1 x Plastic Shock Mount Kit, 1 x Anti-wind Foam Cap, 1 x Audio Connect Cable, 1 x English Manual  

  Key Features:  Adopts electronic circuit control and gold-plated diaphragm capsule, highlight texture.  Designed to minimize background noise and isolate the main sound source.  Wide frequency response (20Hz-20KHz) makes vocal performances sound clear, natural and vibrant.  3.5mm stereo plug fit for most PC.  Shock mount of metal construction is designed with foam inside for protecting mic.  Foam cap reduces noise to ensure clearer sound.  Ideal for radio broadcasting studio, voice recording, karaoke and so on. Important Notes: This is a condenser microphone only work with the device that could provide enough power for it. When connected with desktop computer, the condenser microphone could be used alone. When connected with laptop computer, please connect the laptop to electrical outlet, or use a 48V phantom power to get enough power if the sound is not clear and high enough. If your device could not provide enough power(When used with Amplifier or Mixer,etc.), the sound volume recorded might be low, and  use a extra 48V phantom power adapter to connect it.(phantom power adapter is not included). Can not be used with mobile phone and tablet computer. If you want better sound effect, a sound card could be used.  When recording, please put the microphone away from the amplifier to prevent recording noise due to amplifier.   Specification Type: Wired Polar Pattern: Uni-directional Frequency Range: 20Hz-20kHz Sensitivity: 45dB±1dB S/N: 60dB Compatibility: Linux, Windows 2000, Windows 7, Windows XP, Windows 98, Windows Vista, Windows 98SE, Mac OS, Windows ME Application: Radio Broadcasting Studio, Karaoke, Voice Recording etc. Product Weight: 0.350 kg Package Weight: 0.440 kg Product Size (L x W x H): 5.0 x 5.0 x 16.0 cm / 1.97 x 1.97 x 6.29 inches Package Size (L x W x H): 15.0 x 10.0 x 4.0 cm / 5.90 x 3.93 x 1.57 inches Package Contents: 1 x BM-800 Condenser Sound Recording Microphone, 1 x Plastic Shock Mount Kit, 1 x Anti-wind Foam Cap, 1 x Audio Connect Cable, 1 x English Manual  

IN STOCK AND READY TO SHIP. NEXT DAY DELIVERY (JHB, PTA, DURBAN, CAPE TOWN, P.E) OTHER AREAS: 1-2 WORKING DAYS   Key Features:  Adopts electronic circuit control and gold-plated diaphragm capsule, highlight texture.  Designed to minimize background noise and isolate the main sound source.  Wide frequency response (20Hz-20KHz) makes vocal performances sound clear, natural and vibrant.  3.5mm stereo plug fit for most PC.  Shock mount of metal construction is designed with foam inside for protecting mic.  Foam cap reduces noise to ensure clearer sound.  Ideal for radio broadcasting studio, voice recording, karaoke and so on. Important Notes: This is a condenser microphone only work with the device that could provide enough power for it. When connected with desktop computer, the condenser microphone could be used alone. When connected with laptop computer, please connect the laptop to electrical outlet, or use a 48V phantom power to get enough power if the sound is not clear and high enough. If your device could not provide enough power(When used with Amplifier or Mixer,etc.), the sound volume recorded might be low, and  use a extra 48V phantom power adapter to connect it.(phantom power adapter is not included). Can not be used with mobile phone and tablet computer. If you want better sound effect, a sound card could be used.  When recording, please put the microphone away from the amplifier to prevent recording noise due to amplifier.   Specification Type: Wired Polar Pattern: Uni-directional Frequency Range: 20Hz-20kHz Sensitivity: 45dB±1dB S/N: 60dB Compatibility: Linux, Windows 2000, Windows 7, Windows XP, Windows 98, Windows Vista, Windows 98SE, Mac OS, Windows ME Application: Radio Broadcasting Studio, Karaoke, Voice Recording etc. Product Weight: 0.350 kg Package Weight: 0.440 kg Product Size (L x W x H): 5.0 x 5.0 x 16.0 cm / 1.97 x 1.97 x 6.29 inches Package Size (L x W x H): 15.0 x 10.0 x 4.0 cm / 5.90 x 3.93 x 1.57 inches Package Contents: 1 x BM-800 Condenser Sound Recording Microphone, 1 x Plastic Shock Mount Kit, 1 x Anti-wind Foam Cap, 1 x Audio Connect Cable, 1 x English Manual    

Estimated delivery time: working days (Imported from the UK) - T&C's Apply Please note that all Christmas gift orders need to be placed before the 14th of November to ensure that they are delivered to you in time. This item includes free delivery within South Africa. Powerful studio microphone with a cardioid polar pattern and low self noise. Comes supplied with a transport case and shock mount. The Power Dynamics PDS-MO1 is a condenser microphone with sophisticated performance characteristics and a good quality signal. It has low distortion, and a superior signal-to-noise ratio. The cardioid polar pattern and low self noise produce a good reproduction of the sound. The Power Dynamics PDS-MO1 has a 5/8" nylon thread shock mount which can be used for tripod mounting, reducing vibrations and unwanted oscillations of the microphone. The microphone is ideal for use in a home studio, but can also be used on stage or during radio shows. A transport bag is included in delivery, to ensure the safe arrival of the Power Dynamics PDS-MO1. Highlights ¿ FET Condenser microphone ¿ Cardioid polar pattern ¿ Accurate signal reproduction ¿ low distortion and self noise Features ¿ Connections: 1x XlR output ¿ Frequency response: 30 Hz - 20 kHz ¿ Impedance: 200 Ohm ¿ Sensitivity: -34dB ¿ Shock-resistant metal housing ¿ Shock mount with 5/8" thread for tripod mounting ¿ Power supply: 48V phantom power ¿ Supplied with transport case and shock mount Included ¿ Microphone ¿ Shock mount ¿ Transport case Dimensions ¿ 3.5 x 5.9 x 5.1 inches (W x H x D) (9 x 15 x 13cm) ¿ Weight: approx. 1.2 pounds (550g)