Shotgun microphone

The silver Rode NTG-3 Shotgun Microphone is a professional shotgun microphone that delivers a few unique qualities in order to meet the demands of today's broadcast audio engineers and boom operators. The microphone features radio-frequency (RF) interference properties that avoid annoying noise and interference caused by nearby RF sources such as radio antennas, WIFI networks, internet devices, power lines, etc. The microphone is also built to withstand the rigors of adverse weather conditions. Of course special attention is paid to the accurate, directional pickup characteristics and its frequency response, sensitivity and low noise floor, which result in pristine audio quality. The NTG-3 shotgun microphone is an ideal solution for outdoor ENG and studio applications. RF Rejection The microphone features radio-frequency (RF) interference properties that avoid annoying noise and interference caused by nearby RF sources such as radio antennas, WIFI networks, internet devices, power lines, etc. Withstands Adverse Conditions The microphone is constructed to withstand adverse weather conditions for more stable use outdoors. Supercardioid Line+Gradient Pickup The supercardioid, shotgun characteristics provide excellent off-axis rejection, focused pickup and longer range. Specifications Transducer Condenser Polar Pattern Line-Gradient Supercardioid Frequency Response 40Hz to 20kHz Dynamic Range (Typical) 117dB Signal-to-Noise Ratio 81dB SPL (A-weighted) Maximum Input Sound Level 130dB Power Requirements 48V Phantom Power Output Impedance Nominal: 25 ohms Output Connectors 3-pin XLR Pad No Low Frequency Roll-Off No Dimensions (LxDiameter) 10 x 0.74" (255 x 19mm) Weight 5.74oz (163g) In the Box Water Resistant Aluminum Storage Case Windshield Zip Pouch Microphone Clip 10 Year Warranty

Rode NTG2 Multi-Powered Shotgun Microphone The RØDE NTG2 is a lightweight condenser shotgun microphone, designed for professional applications within the film, video, television and production industries. Its full frequency response, low noise and audio transparency make it an ideal film, video, and voice over microphone, while its low weight (161gm/5.7oz without battery) makes it an ideal boom microphone. In addition to the native 20Hz-20kHz frequency response a selectable high-pass filter at 80Hz is available, which will prevent low end noise such as air conditioners and traffic from being recorded. The NTG2 operates either from a AA (1.5V) battery or P48 phantom power which can be supplied by professional cameras, audio recorders and power supplies. The battery power option makes the NTG2 ideal for scenarios where the camera does not supply phantom power such as DSLR video. The WSVM windshield is supplied to minimise light wind noise and plosives during recording. The optional ‘DeadCat’ furry is recommended for outdoor applications.

Rode NTG3 RF-Bias Shotgun Microphone The RØDE NTG3 super-cardioid shotgun microphone is designed for professional use on film, television, electronic news gathering and wherever high-resolution broadcast audio is required. As RØDE’s premier directional microphone the NTG3 exhibits superlative audio quality with a rich, warm quality and a full frequency response. Its RF bias technology makes it almost completely resistant to moisture, making it the only option when recording in demanding environments where condensation is an issue. Machined from solid brass and available in either anti-glare, nickel-plated finish or matte black (NTG3B), the NTG3 is incredibly robust while remaining light weight. Its precise yet forgiving polar pattern ensures that whether used on-camera or on a boom pole, the NTG3 will capture audio clearly every time. A durable aluminum storage cylinder is supplied to provide the ultimate protection for the NTG3 while in storage and transport. Tightly sealed at both ends the cylinder is highly weatherproof, adding to the microphone’s rugged performance credentials.

Beyerdynamic - MCE85PV Condenser shotgun microphone Developed for professional indoor and outdoor audio recordings, the MCE 85 PV combines superior quality and excellent polar patterns in a rugged yet lightweight aluminum housing. The MCE 85 PV can be mounted to film cameras, DSLR cameras, digital camcorders or in combination with a microphone boom or as a handheld for high-quality recordings. Thanks to the super cardioid / lobe polar pattern the MCE 85 PV can be used to record a sound source very precisely without disturbing ambient noise. A high-quality electret condenser microphone capsule inside the shotgun microphone ensures exceptionally precise sound reproduction. The included low cut filter can be switched on and off. It eliminates low frequencies and compensates for mechanical vibrations and proximity effect.. The MCE 85 PV can be powered from any balanced phantom source.

The RDE NTG3 super-cardioid shotgun microphone is designed for professional use on film, television, electronic news gathering and wherever high-resolution broadcast audio is required. As RDE's premier directional microphone the NTG3 exhibits superlative audio quality with a rich, warm quality and a full frequency response. Its RF bias technology makes it almost completely resistant to moisture, making it the only option when recording in demanding environments where condensation is an issue. Machined from solid brass and available in either anti-glare, nickel-plated finish or matte black (NTG3B), the NTG3 is incredibly robust while remaining light weight. Its precise yet forgiving polar pattern ensures that whether used on-camera or on a boom pole, the NTG3 will capture audio clearly every time. A durable aluminum storage cylinder is supplied to provide the ultimate protection for the NTG3 while in storage and transport. Tightly sealed at both ends the cylinder is highly weatherproof, adding to the microphone's rugged performance credentials. The RDE NTG3 shotgun microphone is designed and made in Australia, and covered by RDE Microphones' industry leading 10 year warranty.

The Rode NTG-3 is a professional, precision long condenser shotgun microphone that is designed for sound wherever high-res broadcast audio is required. This mic offers 50% less self-noise than most other shotgun mics. Quick Facts: Superior broadcast sound quality high sensitivity designed to withstand adverse environmental conditions includes aluminium storage cylander, pop filter, mic clip and zip pouch connects via XLR For more information, see it on the Rode website here

The Rhode NTG2 is a lightweight condenser shotgun microphone, designed for professional applications within the film, video, television and production industries. Its full frequency response, low noise and audio transparency make it an ideal film, video, and voice over microphone, while its low weight makes it an ideal boom microphone. In addition to the native 20Hz-20kHz frequency response a selectable high-pass filter at 80Hz is available, which will prevent low end noise such as air conditioners and traffic from being recorded.

Sennheiser MKE 600 Shotgun Microphone The MKE 600 is the ideal video camera/camcorder microphone able to handle even demanding filmic challenges. Due to its high directivity, the MKE 600 picks up sounds coming from the direction in which the camera is pointing and effectively attenuates noise coming from the sides and rear. The switchable “Low Cut” filter additionally minimizes wind noise. Because some video cameras/camcorders do not provide phantom power, the MKE 600 can also be battery powered. A battery on/off switch prevents the battery from discharging prematurely; “Low Batt” is displayed. Quick facts: Pronounced directivity Switchable "Low Cut" filter minimizes wind noise Phantom or battery powering Rugged all-metal housing Very good suppression of structure-borne noise Supplied with foam windshield and shock mount

Audio Technica - ATR6550 Condenser Shotgun Microphone Crisp & intelligible pickup¿far away or up close. In its ¿Tele¿ range setting, this cardioid condenser is engineered to pick up dialogue and sound effects at a distance, while bypassing ambient noise such as traffic, air-handling systems, room reverberation and mechanically coupled vibrations. Designed especially for use with video cameras.

Rode NTG-2 Condenser Shotgun Microphone. Rode NTG-2 Condenser Shotgun Microphone

Buy Rode NTG2 Multi-Powered Shotgun Microphone for R5,895.00

Buy Rode VideoMic Pro+ Shotgun Microphone Pro Plus Shure AKG for R3,599.00

Buy Rode VideoMic Pro+ Shotgun Microphone Pro Plus Shure AKG for R3,499.00

Buy DSLR On-Camera Super-Cardioid Shotgun Microphone Broadcast for R2,759.00

Buy Zoom F1 Field Recorder with Shotgun Microphone for R4,598.85

Buy Rode Videomic Shotgun Microphone (cable not included) for R799.00

Buy Boya BY-BM3030 On-Camera Shotgun Microphone for R1,650.00

Buy Boya BY-BM3031 On-Camera Shotgun Microphone for R1,150.00

Boya Shotgun Microphone Brand new, never been used. R650 NEG Perfect for vlogging or streaming. The BOYA BY-VM600 is a Cardioid shotgun-style microphone that enhances your audiovisual experience with clear, precise audio. Directional pattern that captures the audio in your frame while rejecting unwanted background noise. In addition, the dead cat reduces unwanted wind noise and protects from accidental bumps.

the vp82 is a professional shotgun microphone for use in a / v sound reinforcement.compact and lightweight with a wide aperture and excellen...162731733

The Rode NTG-1 Condenser Shotgun Microphone in very good condition. the Mic is designed for professional audio capturing in the field or indoors.

Rode NTG-3, 2 condenser directional microphone + keep drum MS055 tabletop tripod Maximum maximum sound pressure level 131dB Frequency range 20 - 20000 Hz Power supply or 1.5 V battery or phantom power + keep drum MS055 tabletop tripod Rode NTG 2 condenser Directional Microphone + Keep drum MS055 tabletop tripod The NTG-3, 2 condenser Directional Microphone from Rode offers a super cardioid polar pattern with excellent direction. With a low equivalent noise level of only 18 dB and a maximum maximum sound pressure level of 131dB is the highest sound quality. For the operation of the NTG2 is a phantom power or 1.5 V battery to protect the microphone with power. Technical details: - Polar Pattern: Super Cardioid - Maximum sound pressure: 131 dB - equivalent noise level: 18 dBA - Frequency range: 20 Hz 20 kHz - Sensitivity: 15 mV/Pa - Dynamic Range: 113 dB - Output Impedance: 250 Ohm - Power Supply: 48 volt (Phantom Power) or 1.5 V battery (AA), Weight: 161 g including battery + Keep drum MS055 tripod table stand 'The Keep drum MS055 tripod stand is an extendable table tripod in three legged design is manufactured from metal. In the height on this dummy is the MS055 15 - 20 cm - Extendable and has a 5/8 thread (no thread reducer included). The rubber stand legs combined Natoin with a weight of 250 g for a secure footing. Details: - Tripod - Heavy Duty Construction - can be extended from 15 - 20 cm - Rubberised legs ' - 5/8 thread - Chrome Finish - Weight: 250 g

The Rode NTG-2 is a great long condenser shotgun mic, perfect for professional use in video production. It's rugged metal construction and low handling noise make it ideal for video professionals. Quick Facts: broadcast sound quality low noise circuitry condenser transducer two step high pass filter (Flat/80Hz) P48 phantom power OR AA battery option includes mic clip, wind shield and zip case connects via XLR For more information, see it on the Rode website here

The Rode NTG-1 is a fantastic condenser shotgun mic, perfect for professional use in film and TV. It's broadcast sound quality and low noise circuitry make it ideal for production industries. Quick Facts: supercardoid polar pattern condenser transducer two step high pass filter (Flat/80Hz) Low handling noise includes mic clip, wind shield and zip case connects via XLR For more information, see it on the Rode website here

The Rode NTG-8 is a broadcast quality FR-bias shotgun mic. It has increased directionality across a wide frequency response range, making it the ideal mic for film, tv and outdoor broadcasting. Quick Facts: Superior broadcast sound quality high sensitivity supercardoit polar pattern designed to withstand environmental conditions very low handling noise includes aluminum cylinder, MS8 shock mount and wind shield For more information, see it on the Rode website here

The MKE 600 is the ideal video camera/camcorder microphone able to handle even demanding filmic challenges. Due to its high directivity, the MKE 600 picks up sounds coming from the direction in which the camera is pointing and effectively attenuates noise coming from the sides and rear. The switchable “Low Cut” filter additionally minimizes wind noise. Because some video cameras/camcorders do not provide phantom power, the MKE 600 can also be battery powered. A battery on/off switch prevents the battery from discharging prematurely; “Low Batt” is displayed. Features Pronounced directivity Maximal rejection of side noise Switchable "Low Cut" filter minimizes wind noise Phantom or battery powering Battery switch with "Low Batt" indicator Rugged all-metal housing Very good suppression of structure-borne noise Supplied with foam windshield and shock mount For more info on this product, please click here. 1 year limited guarantee.

DSLR camera mounted shotgun mic giving you a professional and high performance way to record audio while taking video footage. Audio quality is key when looking for the best possible video footage, whether you are a professional or an amateur.¿¿ To help budding videographers on their way, the 'Pixel Voical MC-50' shotgun microphone is exactly what is needed.¿¿ Featuring a super cardioids polar pattern system, you can significantly reduce the surrounding ambient noise while recording.¿¿ Additionally, when the 'Pixel Voical MC-50' DSLR shotgun mount mic is in use, one can easily adjust the sound in 3 steps - -10dB to +10dB means you can increase or decrease the actual sound being recorded at the flick of a switch for situations ranging from low sound to high sound situations.¿¿ ¿¿ Other great options this audio shotgun mic provides includes a shock resistant mount which effectively reduces noise generated between shots, a Bipolar output buffer FET impedance converter circuit, a low cut filter to remove unwanted noise, helps compensate for under modulation and over modulation, and more! With it's compact size, is's sleek black appearance, and its professional functions, the 'Voical MC-50' is truly your best friend when looking for the best quality audio for your video products.¿¿ Available right now from our warehouse, ready to ship in one working day, and coming with a 1 year warranty, press add to cart now!¿¿ Available from the world's best online source for camera equipment and accessories, Cybotech. At a Glance... Shotgun Microphone for DSLR Cameras Super Cardioids Polar Pattern 3 Step dB Sound Adjustment Low Cut Filter Shock Resistant Mount, Manufacturer Specifications General Polar Pattern: Super Cardioids Dynamic Range: 110dB SPL Maximum Sound Pressure Level: 110dB Signal to Noise Ratio: 74dB SPL Frequency Range: 100Hz-Hz - Available to Choose High Pass Filter @ 80Hz/12dB/ Octave Sensitivity: -42dB (6.2mV/Pa) Active Electronic Circuits: Bipolar Output Buffer FET Impedance Converter (Low-noise Circuit Design) Sound Volume Adjustment: 3-Step Switch (-10 dB, 0 dB, +10 dB) Shock Resistant Mount One Key Noise Reducution Integrated Suspension Damper Low Cut Function Output Connection: 3.5mm Mini Stereo Plug Power Source: x2 1.5V AA Batteries (Not Included) Dimensions Main product dimensions: 208x80x29mm (L x W x D) Main product weight: 92g Package Contents Shotgun Microphone User Manual (Product Specific) Carrying Pouch (Product Specific) Ordering from Cybotech provides you with the following benefits: Orders processed and shipped within 1 Working Day 12 month warranty Award winning customer support Quantity order discounts Worldwide Shipping Certification: CE, FCC, RoHS

Crisp and intelligible pickupfar away or up close. In its Tele range setting, this cardioid condenser is engineered to pick up dialogue and sound effects at a distance, while bypassing ambient noise such as traffic, air-handling systems, room reverberation and mechanically coupled vibrations. Designed especially for use with video cameras 3.5 mm connector plugs into your video camera Two range settings: Normal for close and medium-distance, Tele for long-distance Includes camera-mount, stand clamp, foam windscreen, battery

|Broadcast Quality Sound|: Superior off-axis sound performance. Low noise circuitry, Extremely Low Distortion THD (

The Shure VP82 End-Address Shotgun Condenser Microphone is compact, lightweight and exhibits natural off-axis sound rejection. The microphone's size, side noise rejection and overall sound are a tailored fit for camera mounted applications, small A/V field recordings and other applications requiring a compact, high-quality shotgun microphone. The microphone ships with a zippered pouch and windscreen. Integrated preamplifier design (not modular)Wide aperture for near-field sound sourcesProvides natural off-axis rejectionZipper pouch and foam windscreen (included)Compatible with VP89S premium accessoriesRugged, roadworthy construction Transducer Electret CondenserPolar Pattern Supercardioid / lobarFrequency Response 150 to 20,000 HzDynamic Range (Typical) @ 1kHz 500 ¿ load: 122.5dB1000 ¿ load: 116.5dBClipping Level @ 1 kHz, 1% THD 2500 ¿ load: 7.0 dBV1000 ¿ load: 0.0 dBVSignal-to-Noise Ratio Self Noise (equivalent SPL, A-weighted, typical) 15.0 dB SPL-ACMR 20 to 20,000 Hz ¿ 55 dBOperating Temperature Operating: 0 - 135°F (-18 to 57°C)Relative Humidity 0 to 95%Power Requirements 11-52 V DC phantom power (IEC-61938),