Servo motor pulse generator

DIY NE555 Square Wave Signal Generator Pulse Generator Electronic Production Kits Parameter: Main chip: NE555Input voltage: DC 5V-15VInput current ? 100MAOutput current: 15MA-35MAOutput amplitude: 4.2V-11.4V V-PPMaximum output current:? 15MA (5V supply, V-PP greater than 50%),? 35MA (12V supply, V-PP greater than 50%) Application scope: 1. It is used as a square wave signal generator to generate square wave signals for experimental development and use.2. Used to generate a square wave signal that drives a stepper motor driver.3. Generate adjustable pulses for use by the MCU.4. Generate adjustable pulses to control the associated circuitry. Features: 1. Output with LED indication; (the LED is on when in the low level, the LED is on when in the high level, and the LED is flashing when the frequency is low) 2. The output frequency range is optional (use the short-circuit cap) to make the output frequency more continuously adjustable;low frequency range: 1Hz - 50Hzintermediate frequency range: 50Hz - 1kHzhigh frequency range: 1KHz - 10kHzhigh frequency range: 10kHz - 200kHz 3. The output duty cycle can be fine-tuned, the duty cycle and frequency are not separately adjustable, and the duty cycle is adjusted to change the frequency. 4. The output frequency is adjustable;cycle T=0.7(RA 2RB)CRA, RB is 0-10K adjustable;C=0.001UF at low frequency;in the middle frequency range, C=0.1UF;in the high-frequency file C=1UF;high frequency file C=100UF Package included: 1 X DIY NE555 square wave signal generator pulse generator kits

Parameter:   Main chip: NE555 Input voltage: DC 5V-15V Input current ≥ 100MA Output current: 15MA-35MA Output amplitude: 4.2V-11.4V V-PP Maximum output current: ≥ 15MA (5V supply, V-PP greater than 50%), ≥ 35MA (12V supply, V-PP greater than 50%)   Application scope:   1. It is used as a square wave signal generator to generate square wave signals for experimental development and use. 2. Used to generate a square wave signal that drives a stepper motor driver. 3. Generate adjustable pulses for use by the MCU. 4. Generate adjustable pulses to control the associated circuitry.   Features:   1. Output with LED indication; (the LED is on when in the low level, the LED is on when in the high level, and the LED is flashing when the frequency is low)   2. The output frequency range is optional (use the short-circuit cap) to make the output frequency more continuously adjustable; low frequency range: 1Hz - 50Hz intermediate frequency range: 50Hz - 1kHz high frequency range: 1KHz - 10kHz high frequency range: 10kHz - 200kHz   3. The output duty cycle can be fine-tuned, the duty cycle and frequency are not separately adjustable, and the duty cycle is adjusted to change the frequency.   4. The output frequency is adjustable; cycle T=0.7(RA+2RB)C RA, RB is 0-10K adjustable; C=0.001UF at low frequency; in the middle frequency range, C=0.1UF; in the high-frequency file C=1UF; high frequency file C=100UF   Package included:   5 X DIY NE555 square wave signal generator pulse generator kits

Motor: Motor diameter: 49 MM Motor Height: 35 MM Motor shaft diameter: 3.17 MM (with a worm) Output shaft length: 18 MM Weight: 212 g Wiring length: about 150MM Driving voltage: one group 24V, one group 5V, and one group pulse Note: Do not connect the polarity wrongly, or it will damage the motor. Package included: 1 x Motor 1 x Driver Board

5Pcs NE555 Pulse Frequency Duty Cycle Adjustable Module Square Wave Signal Generator Features: 1. As a square wave signal generator,generates a square wave signal used for experimental development. 2. Used to drive a stepper motor for generating a square wave drive signal. 3. Generate adjustable pulse for MCU. 4. Generate adjustable pulse,to control circuitry associated. 5. Size: 31mm x 22mm 6. Main chip: NE555 7. Input Voltage: 5V-15V DC. When power supply is 5V, the output current can be 15 MA around; when 12V power supply, the output current can 35 MA around 8. Input current: >=100 MA 9. Output amplitude: 4.2V V-PP to 11.4V V-PP. (Different input voltage, the output amplitude will be different) 10. Maximum output current: >=15MA (5V power supply, V-PP greater than 50%), >=35MA (12V power supply, V-PP greater than 50%) 11. Output with LED indication(low level,LED will on; high level,LED will off;low frequency, the LED flashes) 12. The output frequency range is selectable: LF file: 1Hz ~ 50Hz IF file: 50Hz ~ 1kHz High-frequency file: 1KHz ~ 10kHz HF file: 10kHz ~ 200kHz 13.The output duty cycle can fine-tune; duty cycle and frequency is not separately adjustable; adjusting the duty cycle will change the frequency Package included: 5 x NE555 Pulse Frequency Duty Cycle Adjustable Module

Buy Square Wave Signal Generator Stepping Motor Drive Module PWM Pulse Frequency Duty Cycle Adjustable for R185.00

Buy 5Pcs Square Wave Signal Generator Stepping Motor Drive Module PWM Pulse Frequen for R783.18

20Pcs NE555 Pulse Frequency Duty Cycle Adjustable Module Square Wave Signal Generator Features: 1. As a square wave signal generator,generates a square wave signal used for experimental development. 2. Used to drive a stepper motor for generating a square wave drive signal. 3. Generate adjustable pulse for MCU. 4. Generate adjustable pulse,to control circuitry associated. 5. Size: 31mm x 22mm 6. Main chip: NE555 7. Input Voltage: 5V-15V DC. When power supply is 5 V, the output current can be 15 MA around; when 12V power supply, the output current can 35 MA around 8. Input current: >=100 MA 9. Output amplitude: 4.2V V-PP to 11.4V V-PP. (Different input voltage, the output amplitude will be different) 10. Maximum output current: >=15MA (5V power supply, V-PP greater than 50%), >=35MA (12V power supply, V-PP greater than 50%) 11. Output with LED indication(low level,LED will on; high level,LED will off;low frequency, the LED flashes) 12. The output frequency range is selectable: LF file: 1Hz ~ 50Hz                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        &nbs

Buy 10pcs NE555 Pulse Frequency Duty Cycle Adjustable Module Square Wave Signal Generator Stepper Motor for R325.00

Features: 1. As a square wave signal generator,generates a square wave signal used for experimental development. 2. Used to drive a stepper motor for generating a square wave drive signal. 3. Generate adjustable pulse for MCU. 4. Generate adjustable pulse,to control circuitry associated. 5. Size: 31mm x 22mm 6. Main chip: NE555 7. Input Voltage: 5V-15V DC. when power supply is 5 V, the output current can be 15 MA around; when 12V power supply, the output current can 35 MA around 8. Input current: >=100 MA 9. Output amplitude: 4.2V V-PP to 11.4V V-PP. (Different input voltage, the output amplitude will be different) 10. Maximum output current: >=15MA (5V power supply, V-PP greater than 50%), >=35MA (12V power supply, V-PP greater than 50%) 11. Output with LED indication(low level,LED will on; high level,LED will off;low frequency, the LED flashes) 12. The output frequency range is selectable: LF file: 1Hz ~ 50Hz IF file: 50Hz ~ 1kHz High-frequency file: 1KHz ~ 10kHz HF file: 10kHz ~ 200kHz 13.The output duty cycle can fine-tune;duty cycle and frequency is not separately adjustable;adjusting the duty cycle will change the frequency Package included: 1 x NE555 Pulse Frequency Duty Cycle Adjustable Module

BS270 N-Channel Enhancement Mode Field Effect Transistor 60V 400mA 2Ω TO-92LF This N-Channel enhancement mode MOSFET is produced using a proprietary, high cell density, DMOS technology. This product has been designed to minimize on-state resistance while providing rugged, reliable, and fast switching performance. It can be used in most applications requiring up to 500 mA DC. This product is particularly suited for low voltage, low current applications such as small servo motor control, power MOSFET gate drivers, and other switching applications. MOSFET, N, TO-92 Leadformed Continuous Drain Current Id: 400mA Drain Source Voltage Vds: 60V On Resistance Rds(on): 2ohm Power Dissipation Pd: 625mW Rds(on) Test Voltage Vgs: 10V Threshold Voltage Vgs Typ: 2.1V Current Id Max: 400mA Pulse Current Idm: 2A Voltage Vds Typ: 60V Voltage Vgs Max: 2.1V This item is available in stock and is not drop shipped. This avoids delays, customs charges and extra VAT.