Pwm dimming

Description: NOTE: step-down mode, Inputs must be higher than the output above 2V-3V. Instructions: IN+: Positive electrode of power supply IN-: Negative electrode of power supply. LED+: Anode for LED LED-: Cathode connected to LED PWM: Dimming control signal (2.8V-6V) PWM signal limit frequency: 20HZ-20KHZ Rated recommendations: About 1KHZ Package included: 5 x RUIDENG 3W LED Driver

Buy YF-22 PWM Dimming Speed Controller Module Frequency Duty Ratio Pulse Adjustable for R468.87

Buy 10Pcs RIDEN 3W LED Driver Supports PWM Dimming IN 7-30V OUT 700mA for R439.59

Buy RIDEN 3W LED Driver Supports PWM Dimming IN 7-30V OUT 700mA Module for R229.00

Buy 10pcs 3W 5-35V LED Driver 700mA PWM Dimming DC to DC Step-down Module Constant Current Dimmer Contro for R455.00

Buy 3Pcs DC5-30V 5A 150W LED Dimming Module PWM DC Motor Speed Controller Digital Display Encoder Cuty C for R429.00

11-key handy remote control, operated with CR2025 cell battery. Signal passing through walls, no need to point at the receiver. Smooth Dimming: Brightness adjustable, flashing (speed adjustable). 8 dynamic effects, 10 levels of dimming, 256-Grade PWM. Can be switched from 1-to-1 paired or 1-to-multi paired easily. ATTENTION: To achieve 1 to multiple control, must purchase multiple sets of LED controllers. There is some chance that the RF remote controller will be interrupted by another RF remote controller, or by other electronic equipment which are also working at the same frequency. In this case, try to set the remote and the receiver to be working at 1-to-1 mode may help to tackle this issue. How to do 1-to-1 and 1-to-multiple pairing: 1) When you need to do 1-to-1 match with a remote and a receiver, first make sure only 1 receiver is connected to the power, the other receivers can not be working. Press the 'SPEED +' & 'SPEED -' buttons of the remote control at the same time. 2) When you need to do 1-to-multi match with a remote and a number of receivers, first make sure all the receivers are connected to the power and working. Press the Green button (also regarded as the 'LIGHT' button), all the receivers will be set default again which is 1 to multiple working mode (synchronously).

Intimidator Spot 155  is a bright, compact, and lightweight LED moving head, perfect for mobile applications. Rely on it to energize any dance floor with fast and precise movements, crisp optics and even output. Built-in performance features like separate color and gobo wheels, ultrasmooth dimming and adjustable strobe speed enhance any light show. Minimize programming time with built-in movement macros, move-in-black features and sound-activated and automated programs that can generate a synchronized show in master/slave mode. This user-friendly fixture also offers individual reset of pan/tilt, color, and gobo. Multiple units can be power linked to save time running cables and extension cords.   Bright, compact, and lightweight LED moving head perfect for mobile applications Super crisp optics and even output Energize the dance floor with fast and precise movements Increase design flexibility and effects with separate color and gobo wheels Minimize programming time with built-in movement macros and move-in-black features Individual reset of pan/tilt, color, and gobo Save time running cables and extension cords by power linking multiple units Sound-activated programs dance to the beat of the music Generate a synchronized show in Master/Slave mode with easy-to-access, built-in automated programs   DMX Channels:  6 or 11 DMX Connectors:  3-pin XLR Pan and Tilt:  540°/270° Pan and Tilt Ranges:  180°, 360°, 540° pan/90°, 180°, 270° tilt Colors:  9 + white, continuous scroll at variable speeds Gobos:  9 + open (9 aluminum), continuous scroll at variable speeds Light Source:  1 LED (cool white) 32 W (2.3 A), 50,000 hours life expectancy Strobe Rate:  0 to 23 Hz PWM Frequency:  46,900 Hz Beam Angle:  17° Illuminance:  4,860 lux @ 2 m Power Linking:  8 units @ 120 V; 16 units @ 230 V Input Voltage:  100 to 240 VAC, 50/60 Hz (auto-ranging) Power and Current:  62 W, 0.9 A @ 120 V, 60 Hz  62 W, 0.9 A @ 120 V, 60 Hz Weight:  9.8 lb (4.4 kg) Size:  8.1 x 8.3 x 11.5 in (205 x 211 x 291 mm) Approvals:  CE, MET Series:  Intimidator Primary Use:  DJ/Mobile, Bands/Stages, Events, Clubs, Party

Specifications: Item Type: RGB Controller Applicable Lights: RGB led light Voltage: 5-24V Material: Plastic Power Source: DC   Package Included: 1 x LED Dimmer Controller   1. Introduction H801WiFi communicates with Android mobile phones through WiFi to achieve dimming function. Router can be set as an access point, you can connect your phone phone and H801WiFi to the same router. Once the phone and H801WiFi are connected to the same router, you can also set H801WiFi as an wireless access point so that another H801WiFi can connect to it, by this way, multiple H801WiFi can be connected wirelessly to prolong control distance and increase the number of controllers.   2. Performance (1). Connect and control RGB lamps easily by 'LED Dimmer'. (2). Output RGBWW, 3 routes PWM data. (3). Refresh frequency is 500HZ. (4). Support 802.11 b/g/n. (5). Fast transmission, response sensitive. (6). H801WiFi can be controlled separately.  (7). H801WiFi can be controlled by multi phones simultaneously. (8). Built-in dozens of lighting effects. 3. Operation Instruction Connect the phone to H801WiF Step 1: Power on H801WiFi, install 'LED Dimmer' and create shortcut. Duplicate LEDDimmer.apk to phone and click to install, long press the icon and drag it to home screen.   Step 2: Turn on WiFi Power on H801WiFi, click phone pull-down menu, click settings, turn on WLAN, then choose and click 'HCX_******', password is '88888888', enter password and click connect. The pop-up icon indicates WiFi is connected   Step 3: Run LED Dimmer Click LED Dimmer, pops up the following operation interface,slide on color wheel, the light be changed with the color accordingly. Click the button in the middle, the lights will be off. Click the effect selection dialog, there are many effects for choosing. Click menu-Color Rod to set the brightness of each color and playing speed.   4. Connect to the router   If you require your phone to control the lights and surf the internet at the same time, you must connect H801WIFI to the router. Please follow the procedures:   (1). Install LED Dimmer.apk, and turn on WIFI.   (2). Click on menu-- 'Router', click 'WLAN AP', choose the right router, and enter password, then click 'link'. All H801WIFI that can communicate with the phone has been connected to the outer. Connect your phone to router too, after connection, your phone can both surf the internet and control H801WIFI.   5. Product Display

The RGB Touch Controller is a colour-change control system for LED lighting. It features the latest in capacitance and wireless touch technology, to ensure an increased lifespan and reliability by eliminating the mechanical wear associated with physical buttons. The wireless range of the kit is approx 20m and incorporates a new PWM control technology to eliminate the flicker between colour changes. Many features come as standard including multi-type memory functions for colour, modes, speed and brightness/dimming. The kit comes boxed and complete with user manual, simple-to-install input/output receiver and capacitive-touch, colour wheel handheld controller. Specifications: Controller Size: L113.5mm, W55.5mm, D22.5mm Receiver Size: L83mm, W79mm, D33mm Power: Controller takes 3 x AAA batteries (not included) Input Voltage: 12~24V DC Output Current: 6A per channel Effective Distance: Approx. 20m YSL MOMENTS SHOP 43 (FRONTLINE between POSTNET & SIMPLY ASIA) Moffett On Main Lifestyle Centre, 109 17th Ave, CHARLO, Port Elizabeth Operating Times: MON TO FRI = 9AM TO 6PM FRIDAYS CLOSED 12:15 TO 14:15 SATURDAYS = 9AM TO 3PM PUBLIC HOLIDAYS = 9AM TO 2PM Open Last sunday of every month 9AM TO 2PM DEBIT & CREDIT CARDS ACCEPTED