Manfrotto geared head

Manfrotto Geared Head (Black) 400       Overview   The Manfrotto 400 Deluxe Geared Head is a heavy-duty head designed primarily for use on studio column stands or larger tripods, and for use with large or medium format cameras. It offers the ultimate in precision 3-way geared adjustment and control. Self-locking foldaway cranks allow 360° panning, +30° and -90° of frontal tilt & +/- 7.5° of lateral tilt. Side to side levelling is controlled by a separated handle. The bubble level aids in precise positioning. The availability of three different heights of quick release plates eliminates the nuisance of interference of camera standards, which is critical for use of fast wide angle lenses. In addition, the tension holding the round quick release plate can be released to allow fine adjustment with complete safety. Replaces old part number .  Includes 13mm, 23mm and 42mm high quick release plates.  With 13mm, 23mm & 44mm High Q.R. Plates     Specifications   Maximum Camera Supported:     Large format up to 8x10 Load Capacity:     22 lbs (10kg) Height:     cm) Quick Release:     Yes Spirit Level:     Yes Tension Control:     No Tripod Mount Thread Size:     Weight:     5.7 lbs (2.6kg)           All prices are subject to change without n otice. All prices are subject to exchange rate fluctuation.

Manfrotto Junior Geared Head (Black) 410       Overview   Specially designed for SLR and medium format cameras, the Manfrotto 410 Junior Geared Head is a compact geared head that uses easily adjustable knobs and offers precise geared movement in three directions: 360° of pan, +90 to -30° of front tilt & +90 to -30° of lateral tilt. This professional head has a large camera platform and a leveling bubble, and the camera screw travels in a 2" slot to facilitate perfect balancing of the camera's center of gravity. With quick release plate 410PL (with threaded screws). Replaces old part number .  Temporarily disengage geared movement to rapidly position the camera before fine-tuning location.     Specifications   Head Type:     3-Way geared Load Capacity:     11 lbs (5kg) Height:     cm) Quick Release:     Yes Spirit Level:     Yes Tension Control:     No Tripod Mount Thread Size:     Weight:     2.7 lb (1.2kg)           All prices are subject to change without n otice. All prices are subject to exchange rate fluctuation.

Manfrotto Pro Geared Head (Black) 405       Overview   Designed especially for 35mm and medium format camera shooters who need both speed & precision, the Manfrotto 405 is a great three-way head with bubble levels easily seen in two axes no matter the orientation of the camera. Meaty rubberised knobs can either completely disengage the gear mechanism for a quick rough estimate of position or offer the finest exacting placement for even a macro shot. Cranks allow 360 degrees pans and +90 to -30 degrees of frontal or lateral tilt.     Specifications   Maximum Camera Supported:     All medium format systems Load Capacity:     16.5 lb (7.5 kg) Height:     cm) Quick Release:     Yes Spirit Level:     Yes Tension Control:     No Tripod Mount Thread Size:     Weight:     5.3 lb (2.4 kg)             All prices are subject to change without n otice. All prices are subject to exchange rate fluctuation.

The XPRO Geared head features the most common photographic plate in the world so there's no need to use different plates when switching to other Manfrotto supports. The geared movement allows users to frame images precisely - one micro step at a time - on all three axes. The knobs ensure ergonomic comfort even during extensive usage. In addition, in order to make large framing adjustments, the locking system can weighs only 1.65 lbs, but can support a payload of up to 8.8 lbs. Its Adapto body-a strong, rigid technopolymer - makes this head the lightest and most precise ever created by Manfrotto. And Two ZAYKiR Quick Release Plates for the RC2 Rapid Connect Adapter

Excellent condition Manfrotto photography gear. Used maybe 3 times and it stood in the study for years. For collection, cash or cleared EFT only. *Manufacturer’s Tripod Information: Lightweight, sturdy and portable, this basic tripod is one of the easiest of all Manfrotto tripods to handle. This tripod has been designed for all 35 mm and medium format photographic cameras, digital or conventional type. Equipped with a two way head can also be an ideal support for spotting scopes or camcorders or digital video camcorders. Diameter legs in mm:30,25,20. Available in silver or black. Features: • Simple, functional, no-frills • Very sturdy and stable • Broad working height range from very low to very high • High load capacity • Versatile product for all-round use • World-wide spares and service back-up Suitable for: • SLR cameras with short and/or light fixed-length lenses • SLR cameras with mid-long focal length lenses and zooms • Medium format cameras • Spotting scopes and sport optics • Compact camcorders (MicroDV, MiniDV or equivalent size) • Heavy duty studio work • Outdoor use (protected against damp/cold and easy to transport on foot) Specifications: • Number of Leg Sections: 3 • Leg Angles: 25, 43, 73, 90 degrees • Leg Lock Type: Wing Nut • Maximum Operating Height: 181 cm / 71.3 in. • Maximum Height w/o Column Extended: 137 cm / 53.9 in. • Minimum Operating Height: 8 cm / 3.2 in. • Folded Length: 61 cm / 24 in. • Maximum Load: 7 kg / 15.5 lbs • Weight: 2.2 kg / 4.9 lbs
 *Manufacturer’s Head Information Manfrotto 804RC2 Basic Pan/Tilt Head with Quick Release. 3-way photo head constructed of ultra-durable and lightweight technical polymer, the 804RC2 easily withstands the daily rigors of the professional photographer. A unique spring feature has been added to the 804RC2 to assist in the tilt motion of the head to compensate for heavier, off-center loads. Ergonomic and newly designed handles fit comfortably in the hands, while the standard quick release plate fits snugly in the low-profile receiver. Plates Adapters: 200PL-38, 200PLARCH-14, 200PLARCH-38. Specifications: • Finish: Black
• Material: Technopolymer
• Pan: 360 degrees
• Tilt: -30 to +90 degrees Lateral Tilt; -30 to +90 degrees Frontal Tilt
• Quick Release: Yes
• Height: 12 cm / 4.7 in.
• Camera Mount: 1/4"-20
• Tripod Mount: 3/8"-16
• Maximum Load Capacity: 4 kg / 8.8 lbs
• Weight: 0.75 kg / 1.7 lbs

This is a Manfrotto 190 Pro Aluminum Tripod with 804RC2 3-Way Pan/Tilt Head Kit. The all-aluminum chassis, leg tubes, and flip locks combine into a stable camera support that holds up to 8.8 lb and reaches a maximum height of 69". This kit is great for shooting photos and videos with precise angle adjustments using DSLR and smaller medium format cameras. The 190 Pro has a tilting center column that easily disengages from the chassis upon its full extension. This 90° horizontal tilt combines with the tripod's low-angle leg setting to enable extremely low setups for macro photography and more - you can get as low as 3.3" from the ground. The Manfrotto 804RC2 3-Way Pan/Tilt Head with RC2 Quick Release Plate has an ergonomic design and counter spring system. It is made of is a unique polymer, Adapto, that is comparable to aluminum in strength but weighs up to 50% less. It has superb resistance to extreme temperatures and will not corrode or oxidize. The 804RC2 head is also one of the the first 3-way heads to use a counter spring system to help protect your equipment. Built into the forward/back tilt axis is a fixed spring that helps to absorb the shock of the full camera weight from crashing down. The spring also makes it easier to position the camera on this axis since it opposes some of the camera weight.

Retails for between R13000 & R15500. Full smoothness control while shooting thanks to the variable fluid mechanisms. The system is ideal for the latest camcorders.

Full smoothness control while shooting thanks to the variable fluid mechanisms. The system, ideal for the latest camcorders, is combined with aluminum professional twin legs tripod (middle level spreader, spiked feet) and carrying bag.

Excellent condition Manfrotto aluminum fluid video system Tripod and head. 701 HDV. No Bag. Replacement incl of VAT is R

Manfrotto Accessory Plate 23mm 400PL-MED       Overview   The Manfrotto 400PL-MED Quick Release Plate is one of the three plates originally supplied with the 400 Deluxe Geared Head. This mm) high version offers medium clearance between the head and the camera. Supplied with both and 3/8" screws.         All prices are subject to change without notic e. All prices are subject to exchange rate fluctuation.

Manfrotto Accessory Plate 13mm (Black) 400PL-LOW       Overview   The Manfrotto 400PL-LOW Quick Release Plate is one of the three plates originally supplied with the 400 Deluxe Geared Head. This mm) high version offers the lowest profile. Supplied with both and 3/8" screws.     All prices are subject to change without notic e. All prices are subject to exchange rate fluctuation.

Manfrotto Accessory Plate 42mm 400PL-HIG       Overview   The Manfrotto 400PL-HIG Quick Release Plate is one of the plates originally supplied with the Deluxe Geared Head (). This mm) high version offers maximum clearance. Supplied with both and 3/8" screws.         All prices are subject to change without notic e. All prices are subject to exchange rate fluctuation.

Manfrotto Classic Tripod 055XB Product Info The Bogen 055XB tripod (formerly BN) is one of the most versatile and popular tripods in the Manfrotto range. This specific version is lightweight and portable enough to take into the field, and is ideal for medium format and single-lens-reflex (SLR) cameras whether digital or film. The Bogen 055XB tripod (formerly BN) provides speedy set-up coupled with added security with quick action, lever-type leg locks, low angle adapter and leg warmers. Note: This is Bogen leg set only. Does not include a Bogen head. Purchase Bogen Manfrotto Tripod Head separately. Package Contents: Manfrotto Classic Tripod 055XB

Manfrotto 525MVB Tripod with 503 Head (excludes pan handle) and the original Manfrotto Carrying Bag is included. Great condition. Used on a feature film. The Manfrotto 525MVB is a portable 3-section tripod, designed to hold lightweight cameras and camcorders that weigh around 15 kg. The Manfrotto 525MVB 3-section tripod can be extended by up to 156 cm, allowing you to position your camera according to your requirements to take a range of shots. The Manfrotto 503 Head is designed to support the latest Video Cameras. Particular care has been taken to produce the smoothest pan and tilt with customisable fluid drag control.

Manfrotto Joystick Head #222 Excellent condition, hardly used. Ideal for wildlife and action photography Suitable for all cameras with standard base screw fitting. Comes with a quick release plate which is compatible with other Manfrotto systems The Joystick head must be placed on top of a tripod (tripod is not supplied). Most tripods come with optional ball head, which must be removed and the Joystick is then screwed onto the tripod. The Joystick can be tilted and moved 360° by pressing the front lever, once released, the camera is fixed into position. New one is around R . This is a bargain.