Hawkins volt microprocessor

Buy 12 Volt Microprocessor Controller Charger for R5,275.00

Hawkins Battery Charger - Auto Pro 10 - 12/24v The Hawkins Auto Pro 10 Battery Charger is a three stage temperature compensated fully automatic microprocessor controlled unit. The three charging stages are identified as Bulk, Absorption and Float. These chargers are suitable for charging all types of Lead/Calcium -, Flooded-, Maintenance Free-, Sealed-, Gel and AGM (Absorbent Glass Mat) batteries. The Auto Pro chargers were designed in compliance with IEC 335-2-2 and has a two year limited warranty against defects in materials and workmanship. Features Thermal overload protection Replaceable fuse protection on output side Robust, epoxy coated steel cabinet Two year warranty Not suitable to be supplied from generators unless generator has low distortion 50Hz 230Vac output Specifications Current Selector 5A 10A Rated Input Voltage 230V a.c. 230V a.c. Rated Input Current 0,7 A a.c. 1,1 A a.c. Rated Output Voltage 12V d.c. 12V d.c. Rated Ouput Current 6A d.c. 10A d.c. Current Selector 5A 10A Rated Input Voltage 230V a.c. 230V a.c. Rated Input Current 1.2A a.c. 1.7A a.c. Rated Output Voltage 24V d.c. 24V d.c. Rated Ouput Current 6A d.c. 10A d.c. Dimensions 245 x 145 x 150 mm Weight Nett/Gross 6,0/6,4

Hawkins Battery Charger - Auto Pro 5 - 24v The Hawkins Auto Pro 5 Battery Charger is a three stage temperature compensated fully automatic microprocessor controlled unit. The three charging stages are identified as Bulk, Absorption and Float. These chargers are suitable for charging all types of Lead/Calcium -, Flooded-, Maintenance Free-, Sealed-, Gel and AGM (Absorbent Glass Mat) batteries. The Auto Pro chargers were designed in compliance with IEC 335-2-2 and has a two year limited warranty against defects in materials and workmanship. Features Thermal overload protection Replaceable fuse protection on output side Robust, epoxy coated steel cabinet Two year warranty Not suitable to be supplied from generators unless generator has low distortion 50Hz 230Vac output Specifications Rated Input Voltage 230V a.c. Rated Input Current 1,1 A a.c. Rated Output Voltage 24V d.c. Rated Output Current 6A d.c. Float Voltage 27V d.c. Dimensions 245 x 145 x 150 mm Weight Nett/Gross 5,0/5,3 kg

Hawkins Battery Charger - Auto Pro 5 - 12v The Hawkins Auto Pro 5 Battery Charger is a three stage temperature compensated fully automatic microprocessor controlled unit. The three charging stages are identified as Bulk, Absorption and Float. These chargers are suitable for charging all types of Lead/Calcium -, Flooded-, Maintenance Free-, Sealed-, Gel and AGM (Absorbent Glass Mat) batteries. The Auto Pro chargers were designed in compliance with IEC 335-2-2 and has a two year limited warranty against defects in materials and workmanship. Features Thermal overload protection Replaceable fuse protection on output side Robust, epoxy coated steel cabinet Two year warranty Not suitable to be supplied from generators unless generator has low distortion 50Hz 230Vac output Specifications Rated Input Voltage 230V a.c. Rated Input Current 0,6 A a.c. Rated Output Voltage 12V d.c. Rated Output Current 6A d.c. Float Voltage 13,5V d.c. Dimensions 245 x 145 x 150 mm Weight Nett/Gross 4,1/4,35 kg

Hawkins Battery Charger - Auto Pro 35 The Hawkins Auto Pro 35 Battery Charger is a three stage temperature compensated fully automatic microprocessor controlled unit. The three charging stages are identified as Bulk, Absorption and Float. These chargers are suitable for charging all types of Lead/Calcium -, Flooded-, Maintenance Free-, Sealed-, Gel and AGM (Absorbent Glass Mat) batteries. The Auto Pro chargers were designed in compliance with IEC 335-2-2 and has a two year limited warranty against defects in materials and workmanship. Features Thermal overload protection Replaceable fuse protection on output side Robust, epoxy coated steel cabinet Two year warranty Not suitable to be supplied from generators unless generator has low distortion 50Hz 230Vac output Specifications Rated Input Voltage 230V a.c. Rated Input Current 3,3 A a.c. Rated Output Voltage 12V d.c. Rated Output Current 35A d.c. Dimensions 230 x 220 x 285 mm Weight Nett/Gross 11,1/11,5 kg

Hawkins Battery Charger - Auto Pro 20 - 36v The Hawkins Auto Pro 20 Battery Charger is a three stage temperature compensated fully automatic microprocessor controlled unit. The three charging stages are identified as Bulk, Absorption and Float. These chargers are suitable for charging all types of Lead/Calcium -, Flooded-, Maintenance Free-, Sealed-, Gel and AGM (Absorbent Glass Mat) batteries. The Auto Pro chargers were designed in compliance with IEC 335-2-2 and has a two year limited warranty against defects in materials and workmanship. Features Thermal overload protection Replaceable fuse protection on output side Robust, epoxy coated steel cabinet Two year warranty Not suitable to be supplied from generators unless generator has low distortion 50Hz 230Vac output Specifications Rated Input Voltage 230V a.c. Rated Input Current 6,0 A a.c. Rated Output Voltage 36V d.c. Rated Output Current 19A d.c. Dimensions 230 x 220 x 285 mm Weight Nett/Gross 14,1/14,5 kg

Hawkins Battery Charger - Auto Pro 20 - 24v The Hawkins Auto Pro 20 Battery Charger is a three stage temperature compensated fully automatic microprocessor controlled unit. The three charging stages are identified as Bulk, Absorption and Float. These chargers are suitable for charging all types of Lead/Calcium -, Flooded-, Maintenance Free-, Sealed-, Gel and AGM (Absorbent Glass Mat) batteries. The Auto Pro chargers were designed in compliance with IEC 335-2-2 and has a two year limited warranty against defects in materials and workmanship. Features Thermal overload protection Replaceable fuse protection on output side Robust, epoxy coated steel cabinet Two year warranty Not suitable to be supplied from generators unless generator has low distortion 50Hz 230Vac output Specifications Rated Input Voltage 230V a.c. Rated Input Current 4,1 A a.c. Rated Output Voltage 24V d.c. Rated Output Current 20A d.c. Dimensions 230 x 220 x 285 mm Weight Nett/Gross 11,1/11,5 kg

Hawkins Battery Charger - Pro 615 The Hawkins Pro 615 Battery Charger is ideally suited for small businesses offering a TV battery recharging service or large vehicle workshops where up to 6 x 12V batteries need to be charged simultaneously. 3 batteries are connected in series and this is connected to 1 set of charging leads (Bank 1). A second set of 3 batteries connected in series can be connected to the second set of charging leads (Bank 2). A voltage selector switch allows the user to select 12V, 24V or 36V for each bank. The charge rate selector is used to control the current on each bank. Each bank is protected on the input side by an internal mains fuse and on the output side by a circuit breaker and a fuse. The Pro series of chargers were designed in compliance with IEC 335-2-2 and has a two year limited warranty against defects in materials and workmanship. Not recommended for sealed batteries. Features Thermal overload protection Replaceable fuse protection on output side Automatic circuit breaker protection Robust, epoxy coated steel cabinet Two year warranty Specifications Input Voltage 230V a.c. 230V a.c. Battery Voltage 12V 24V Current Selector 5 5 Rated Input Current 0.95A a.c. 1.7A a.c. Rated Output Voltage 14V d.c. 27V d.c. Rated Output Current 10A d.c. 10A d.c. Rated Input Voltage 230V a.c. Volt Selector 36V Current Selector 5 Rated Input Current 2.7A a.c. Rated Output Voltage 43V d.c. Rated Output Current 10A d.c. Dimensions 445 x 200 x 220mm Weight 17.4kg

OptiMate Pro-4  Battery Charger - 12V   The OptiMate Pro-4 Battery Charger  handles up to 4 batteries at a time. The exclusive ampmatic microprocessor with version 2 programming, tests the battery before, during and after charging and charge current is automatically varied according to battery size and health. Ideal for large PTW workshops.   Features   New mode ¿ 1 hour activation charge only for new* batteries that have received acid just prior to charging, such as STD flooded batteries with removable filler caps and AGM-MF ¿dry-charged¿ batteries that are delivered with a separate custom acid pack. 2A / 4A mode ¿ 12 hour max. charge mode for diagnoses, recovery, charging, testing of low volt sulphated batteries. Suitable for recharge of all batteries including factory activated sealed AGM batteries (e.g. Yuasa YTZ, GYZ) prior to sale.   Specifications   Bank/Charging Stations 4 (each bank operates independently) Charging AMPS (per bank) 4A maximum, Ampmatic control. (2A max. when 2A is selected) Use Indoor / workshop environment (lowest temperature: -4°F / -20°C) Save Low Volt Start of 1.8V + 2 step desulphation recovery Ideal For STD, AGM & GEL 12V batteries from 2 ¿ 40Ah Input Selectable 110-120VAC / 220-240VAC 50-60Hz, with ON/OFF power switch and replaceable fuse protection Style   Vented industrial table top case with wall mount option (TS-218), 6ft / 180cm AC supply lead and 4 x 6ft / 180cm charge lead ending in SAE connector. 4 x standard battery clip sets included.  

This charger completely retracts the cord for easy storage and portability. Conveniently charges your Samsung Galaxy Core Prime using a standard 12 volt car receptacle. It is built in a microprocessor controlled circuit that will regulate the amount of power applied to extend the life of your battery.

Description: 1. The MXS 5.0 is an advanced microprocessor controlled battery charger with automatic temperature compensation built in providing unrivalled performance on batteries from 1.2Ah up to 110Ah. 2. The MXS5.0 solves a broad range of battery problems and is the ideal charger for the user with high demands. 3. AGM mode is perfect for maximizing performance and life of most Stop-Start batteries. Feature: 1. Features of the MXS 5.0 include diagnosis of battery condition to establish if it can receive and retain charge, automatic desulphation programmer and a special reconditioning function that will revive and restore deeply discharged and stratified batteries. 2. The built in temperature compensation ensures ideal charging performance even in the most extreme conditions. 3. Float/Pulse maintenance makes the MXS 5.0 ideal for long-term maintenance. The entire process of battery testing, charging and maintenance is easily followed on the clear LED display. 4.The MXS 5.0 is a fully automatic "connect and forget" 12V charger with 8 charging steps. 5.Offers selectable SMALL BATTERY, and NORMAL BATTERY programs. The RECOND and AGM options operate individually or together in both SMALL BATTERY and NORMAL BATTERY programs, providing great flexibility for the user. Wide charging range on all lead-acid battery types from 1.2Ah up to 110Ah with additional maintenance capability to 160Ah. Splash proof and dust proof. The MXS 5.0 is easy and safe to use, protects vehicle electronics, is spark-free, reverse polarity protected and short circuit proof. Specification: Volt 12V Rated Voltage AC 220–240VAC, 50–60Hz Charging voltage SMALL, NORMAL: 14.4V, COLD/AGM: 14.7V, RECOND: 15.8V Minimun battery voltage 2.0V Charging current 5A max Current, mains 0.6A rms (at full charging current) Back current drain Ripple Ambient temperature -20°C to +50°C, output power is reduced automatically at high temperatures Charger type 8 step, fully automatic charging cycle Battery types All types of 12V lead-acid batteries (WET, MF, Ca/Ca, AGM and GEL) Battery capacity 1.2–110Ah up to 160Ah for maintenance Dimensions 150 x 65 x 38mm (L x W x H) Weight 0.6kg User Mannual in ten languages (EN, DE, FR, ES, IT, NL, SE, DK, NO, FI) Package Included: 1 X Charger Unit; 2 X User Manual