Epoxy two

Buy Noble Quick Epoxy Two Part Adhesive Glue Super for R43.68

Motorcycle Wheel tyre Decal Waterproof Reflective Rim Stripe luminous warning stickers Description: PU Luminous Crystal Epoxy manufacturing, bending of the best, not broken, yellowing resistance over a three-year period, the late hardness no abnormal changes. Luminous Description: After being natural light, fluorescent light, ultraviolet light and other radiation, the energy stored in the dark at night, or will be light, and the brightness slowly decay, to the last light-emitting disappear, you need to absorb light (light or sunlight) 15 minutes or more, it can glow in the dark. (Luminous time of about 5 hours or so) Suitable: All dimensions of the tire! Figure 10 is a 12-inch tire strips Miscellaneous paste made ??of two tires four faces will need 48 strips, other tire size Please note the number of spacing Oh! Scooter ride across the proposed election of four sets of proposed election of six sets! Tips: In deciding not to dress up your car before waxing one week, the wax will make stickers stick is not strong; car stickers pasted Do not wash after three days, do not stick in the rainy day, so the effect will be good oh! Specification: Name: Glow Epoxy tire stickers Quantity: 1 set price (eight small pieces) Dimensions: length 4.8cm width 0.2cm thickness 0.85cm Material: PU Crystal Epoxy Package Included: 1 X Set (Eight Small Pieces)

Options: Color Red Color Red 1 Color Brown Color Yellow Motorcycle Wheel tyre Decal Waterproof Reflective Rim Stripe luminous warning stickers Description: PU Luminous Crystal Epoxy manufacturing, bending of the best, not broken, yellowing resistance over a three-year period, the late hardness no abnormal changes. Luminous Description: After being natural light, fluorescent light, ultraviolet light and other radiation, the energy stored in the dark at night, or will be light, and the brightness slowly decay, to the last light-emitting disappear, you need to absorb light (light or sunlight) 15 minutes or more, it can glow in the dark. (Luminous time of about 5 hours or so) Suitable: All dimensions of the tire! Figure 10 is a 12-inch tire strips Miscellaneous paste made ??of two tires four faces will need 48 strips, other tire size Please note the number of spacing Oh! Scooter ride across the proposed election of four sets of proposed election of six sets! Tips: In deciding not to dress up your car before waxing one week, the wax will make stickers stick is not strong; car stickers pasted Do not wash after three days, do not stick in the rainy day, so the effect will be good oh! Specification: Name: Glow Epoxy tire stickers Quantity: 1 set price (eight small pieces) Dimensions: length 4.8cm width 0.2cm thickness 0.85cm Material: PU Crystal Epoxy Package Included: 1 X Set (Eight Small Pieces)

Foldup caravan for sale:- 1. Hard solid sides 2. Newly renovated inside 3. New matress 4. New hammock 5. Easy and very light to tow 6. Rear and front towbar hitch epoxy painted 7. Caravan 4 lifting jacks epoxy painted 8. Rear towbar to tow caravan or boat. 9. Clip-on table 10. Caravan step stool The following camping equipment included:- 1) Three camping chairs - new 2) Two UV50 proteced ambrellas - new 3) Camping 60L Water Tank - new 4) Camping Pop-up Toilet or shower - new 5) Foldup camping braai - new 6) Camping Folding Table - new 7) Camping Ground Sheet - new 8) Camping Flat Steel Groundsheet Pegs - new 9) Camping Non Stick frying pans - new 10) Camping Muti-functional collapsible hanging dustbin - new 11) Camping Retactable Clothes Line dryer - new 12) Camping Speed Heat shower - new 13) Camping Electric heating water faucet & shower - new 14) Camping Garden hose - new 15) 4 Person Picnic set - new 16) Cooler Freezer 80liter box - new 17) Dishwash stand table - new Prize: R45,000 Call Johan 0711290168

Hawkins Battery Charger - Pro 324 The Hawkins Pro 324 Battery Charger is a powerful engine starter and battery charger combination. The Pro 324 will deliver an engine start aid of 300A c.c. and is capable of charging 12V and 24V batteries. Selection is made by connecting the charging cable to either the 12V stud or 24V stud on the top panel. The transformer is protected by an automatic reset thermal circuit breaker and a 12.5A mains fuse. The output side is protected by a replaceable 80A fuse to guard against incorrect polarity or too high a charging current. Two rocker switches allow for both Battery Charge/Engine Start and HIGH/LOW charging selection. The Pro series of chargers were designed in compliance with IEC 335-2-2 and has a two year limited warranty against defects in materials and workmanship. Not recommended for sealed batteries. Features Thermal overload protection Replaceable fuse protection on output side Automatic circuit breaker protection Robust, epoxy coated steel cabinet Two year warranty Specifications Input Voltage 230V a.c. 230V a.c. Battery Voltage 12V 24V Current Selector 6 6 Battery Charger Switch Position LOW LOW Input Current 3A a.c. 6.9A a.c. Ouput Voltage 12V d.c. 24V d.c. Ouput Current 37A d.c. 44A d.c. Switch Position HIGH HIGH Input Current 4.5A a.c. 9.5A a.c. Ouput Voltage 12.5V d.c. 25V d.c. Output Current 49A d.c. 54A d.c. Min Battery Capacity 35Ah 35Ah Dimensions 260 x 540 x 220mm Dimensions with Handle 260 x 840 x 220mm Weight 17.5kg

Hawkins Battery Charger - Pro 224 The Hawkins Pro 224 Battery Charger is a powerful engine starter and battery charger combination. It is intended for table top use at home or in small businesses and garages. The Pro 224 will deliver an engine start aid of 200A c.c. which is sufficient to start petrol and diesel engines up to 2-litre capacity. In charger mode, the charger will charge 12V and 24V batteries. Selection is made by connecting the charging cable to either the 12V stud or 24V stud on the front panel. The transformer is protected by an automatic reset thermal circuit breaker and a 12.5A mains fuse. The output side is protected by a replaceable 80A fuse to guard against incorrect polarity or too high a charging current. Two rocker switches allow for both Battery Charge/Engine Start and HIGH/LOW charging selection. The Pro series of chargers were designed in compliance with IEC 335-2-2 and has a two year limited warranty against defects in materials and workmanship. Not recommended for sealed batteries. Features Thermal overload protection Replaceable fuse protection on output side Automatic circuit breaker protection Robust, epoxy coated steel cabinet Two year warranty Specifications Input Voltage 230V a.c. 230V a.c. Battery Voltage 12V 24V Battery Charger Switch Position LOW LOW Input Current 0.55A a.c. 1.2A a.c. Ouput Voltage 12V d.c. 24V d.c. Ouput Current 7.2A d.c. 8A d.c. Switch Position HIGH HIGH Input Current 1.48A a.c. 3A a.c. Ouput Voltage 12V d.c. 24V d.c. Output Current 18.5A d.c. 19A d.c. Engine Starter Switch Position LOW LOW Input Current 2.87A a.c. 6.5A a.c. Output Voltage 12V d.c. 24V d.c. Output Current 35.3A d.c. 39A d.c. Switch Position HIGH HIGH Input Current 4.9A a.c. 10.9A a.c. Output Voltage 12V d.c. 24V d.c. Output Current 56A d.c. 62A d.c. Dimensions 320 x 220 x 180mm Weight 10.5kg

Hawkins Battery Charger - Auto Pro 10 - 12/24v The Hawkins Auto Pro 10 Battery Charger is a three stage temperature compensated fully automatic microprocessor controlled unit. The three charging stages are identified as Bulk, Absorption and Float. These chargers are suitable for charging all types of Lead/Calcium -, Flooded-, Maintenance Free-, Sealed-, Gel and AGM (Absorbent Glass Mat) batteries. The Auto Pro chargers were designed in compliance with IEC 335-2-2 and has a two year limited warranty against defects in materials and workmanship. Features Thermal overload protection Replaceable fuse protection on output side Robust, epoxy coated steel cabinet Two year warranty Not suitable to be supplied from generators unless generator has low distortion 50Hz 230Vac output Specifications Current Selector 5A 10A Rated Input Voltage 230V a.c. 230V a.c. Rated Input Current 0,7 A a.c. 1,1 A a.c. Rated Output Voltage 12V d.c. 12V d.c. Rated Ouput Current 6A d.c. 10A d.c. Current Selector 5A 10A Rated Input Voltage 230V a.c. 230V a.c. Rated Input Current 1.2A a.c. 1.7A a.c. Rated Output Voltage 24V d.c. 24V d.c. Rated Ouput Current 6A d.c. 10A d.c. Dimensions 245 x 145 x 150 mm Weight Nett/Gross 6,0/6,4

Hawkins Battery Charger - Auto Pro 5 - 24v The Hawkins Auto Pro 5 Battery Charger is a three stage temperature compensated fully automatic microprocessor controlled unit. The three charging stages are identified as Bulk, Absorption and Float. These chargers are suitable for charging all types of Lead/Calcium -, Flooded-, Maintenance Free-, Sealed-, Gel and AGM (Absorbent Glass Mat) batteries. The Auto Pro chargers were designed in compliance with IEC 335-2-2 and has a two year limited warranty against defects in materials and workmanship. Features Thermal overload protection Replaceable fuse protection on output side Robust, epoxy coated steel cabinet Two year warranty Not suitable to be supplied from generators unless generator has low distortion 50Hz 230Vac output Specifications Rated Input Voltage 230V a.c. Rated Input Current 1,1 A a.c. Rated Output Voltage 24V d.c. Rated Output Current 6A d.c. Float Voltage 27V d.c. Dimensions 245 x 145 x 150 mm Weight Nett/Gross 5,0/5,3 kg

Hawkins Battery Charger - Auto Pro 5 - 12v The Hawkins Auto Pro 5 Battery Charger is a three stage temperature compensated fully automatic microprocessor controlled unit. The three charging stages are identified as Bulk, Absorption and Float. These chargers are suitable for charging all types of Lead/Calcium -, Flooded-, Maintenance Free-, Sealed-, Gel and AGM (Absorbent Glass Mat) batteries. The Auto Pro chargers were designed in compliance with IEC 335-2-2 and has a two year limited warranty against defects in materials and workmanship. Features Thermal overload protection Replaceable fuse protection on output side Robust, epoxy coated steel cabinet Two year warranty Not suitable to be supplied from generators unless generator has low distortion 50Hz 230Vac output Specifications Rated Input Voltage 230V a.c. Rated Input Current 0,6 A a.c. Rated Output Voltage 12V d.c. Rated Output Current 6A d.c. Float Voltage 13,5V d.c. Dimensions 245 x 145 x 150 mm Weight Nett/Gross 4,1/4,35 kg

Hawkins Battery Charger - Auto Pro 35 The Hawkins Auto Pro 35 Battery Charger is a three stage temperature compensated fully automatic microprocessor controlled unit. The three charging stages are identified as Bulk, Absorption and Float. These chargers are suitable for charging all types of Lead/Calcium -, Flooded-, Maintenance Free-, Sealed-, Gel and AGM (Absorbent Glass Mat) batteries. The Auto Pro chargers were designed in compliance with IEC 335-2-2 and has a two year limited warranty against defects in materials and workmanship. Features Thermal overload protection Replaceable fuse protection on output side Robust, epoxy coated steel cabinet Two year warranty Not suitable to be supplied from generators unless generator has low distortion 50Hz 230Vac output Specifications Rated Input Voltage 230V a.c. Rated Input Current 3,3 A a.c. Rated Output Voltage 12V d.c. Rated Output Current 35A d.c. Dimensions 230 x 220 x 285 mm Weight Nett/Gross 11,1/11,5 kg

Hawkins Battery Charger - Auto Pro 50 - 24v The Hawkins Auto Pro 50 Battery Charger is a fully regulated and temperature compensated charger that is available in both 12V and 24V versions. The charger is specifically intended to charge large capacity batteries rapidly and safely and may be used in standby mode - i.e. left connected to the battery for lengthy periods - without fear of overcharging and damaging the battery. It may be used to charge both conventional flooded and/or sealed batteries. The charger is reverse polarity protected to prevent serious damage that can occur from wrong connections. The Auto Pro chargers were designed in compliance with IEC 335-2-2 and has a two year limited warranty against defects in materials and workmanship. Features Thermal overload protection Replaceable fuse protection on output side Automatic circuit breaker protection Robust, epoxy coated steel cabinet Two year warranty Specifications Input Voltage 230V a.c. Input Current 10,54 A a.c. Output Voltage 28.8V d.c. Float Voltage 27V d.c. Output Current 50A Min Ah 100Ah Dimensions 360 x 365 x 325 mm Weight 30,0 kg

Hawkins Battery Charger - Pro 615 The Hawkins Pro 615 Battery Charger is ideally suited for small businesses offering a TV battery recharging service or large vehicle workshops where up to 6 x 12V batteries need to be charged simultaneously. 3 batteries are connected in series and this is connected to 1 set of charging leads (Bank 1). A second set of 3 batteries connected in series can be connected to the second set of charging leads (Bank 2). A voltage selector switch allows the user to select 12V, 24V or 36V for each bank. The charge rate selector is used to control the current on each bank. Each bank is protected on the input side by an internal mains fuse and on the output side by a circuit breaker and a fuse. The Pro series of chargers were designed in compliance with IEC 335-2-2 and has a two year limited warranty against defects in materials and workmanship. Not recommended for sealed batteries. Features Thermal overload protection Replaceable fuse protection on output side Automatic circuit breaker protection Robust, epoxy coated steel cabinet Two year warranty Specifications Input Voltage 230V a.c. 230V a.c. Battery Voltage 12V 24V Current Selector 5 5 Rated Input Current 0.95A a.c. 1.7A a.c. Rated Output Voltage 14V d.c. 27V d.c. Rated Output Current 10A d.c. 10A d.c. Rated Input Voltage 230V a.c. Volt Selector 36V Current Selector 5 Rated Input Current 2.7A a.c. Rated Output Voltage 43V d.c. Rated Output Current 10A d.c. Dimensions 445 x 200 x 220mm Weight 17.4kg

Hawkins Battery Charger - Auto Pro 20 - 36v The Hawkins Auto Pro 20 Battery Charger is a three stage temperature compensated fully automatic microprocessor controlled unit. The three charging stages are identified as Bulk, Absorption and Float. These chargers are suitable for charging all types of Lead/Calcium -, Flooded-, Maintenance Free-, Sealed-, Gel and AGM (Absorbent Glass Mat) batteries. The Auto Pro chargers were designed in compliance with IEC 335-2-2 and has a two year limited warranty against defects in materials and workmanship. Features Thermal overload protection Replaceable fuse protection on output side Robust, epoxy coated steel cabinet Two year warranty Not suitable to be supplied from generators unless generator has low distortion 50Hz 230Vac output Specifications Rated Input Voltage 230V a.c. Rated Input Current 6,0 A a.c. Rated Output Voltage 36V d.c. Rated Output Current 19A d.c. Dimensions 230 x 220 x 285 mm Weight Nett/Gross 14,1/14,5 kg

Hawkins Battery Charger - Auto Pro 20 - 24v The Hawkins Auto Pro 20 Battery Charger is a three stage temperature compensated fully automatic microprocessor controlled unit. The three charging stages are identified as Bulk, Absorption and Float. These chargers are suitable for charging all types of Lead/Calcium -, Flooded-, Maintenance Free-, Sealed-, Gel and AGM (Absorbent Glass Mat) batteries. The Auto Pro chargers were designed in compliance with IEC 335-2-2 and has a two year limited warranty against defects in materials and workmanship. Features Thermal overload protection Replaceable fuse protection on output side Robust, epoxy coated steel cabinet Two year warranty Not suitable to be supplied from generators unless generator has low distortion 50Hz 230Vac output Specifications Rated Input Voltage 230V a.c. Rated Input Current 4,1 A a.c. Rated Output Voltage 24V d.c. Rated Output Current 20A d.c. Dimensions 230 x 220 x 285 mm Weight Nett/Gross 11,1/11,5 kg

  BID WITH CONFIDENCE, WE ARE VERIFIED!!! Features:  Made of CREE XP-E LED chips, high brightness and light weakness.  Consistent with the original car, do not change lines, a direct replacement for the original car glass bulb.  Lifetime up to 3-5 million hours while traditional bulbs are about two thousand hours.  Using the new IC drivers.  Quick response without hot start time, can shine in microseconds.  Low power consumption.  LED is semiconductor solid-state light source, anti-shock, waterproof, and high light efficiency.  Specifications:  Chip Type: CREE XP-E LED  Bulb Base: 9006 HB4 P22D  Chip Count: 10  Material: Plastic+PCB+Water Resistant Epoxy Cover, PBT, Aluminum  Wattage: 50W  Luminous Flux(lm): 2800-3100  Color Temperature(K): 6500-7500  Voltage: AC/DC 12-24V  Light Color: Yellow, White(optional)  Type: Turn Signal Light, Daytime Running Light, Fog Light  Primary Application: Motorcycle, Truck & Trailer, Car  Package Size: 11 * 8 * 4.5cm / 4.3 * 3.1 * 1.8in  Package Weight: 29g / 1oz  Package List:  1 * Car Signal Light 

  BID WITH CONFIDENCE, WE ARE VERIFIED!!! Features:  Made of CREE XP-E LED chips, high brightness and light weakness.  Consistent with the original car, do not change lines, a direct replacement for the original car glass bulb.  Lifetime up to 3-5 million hours while traditional bulbs are about two thousand hours.  Using the new IC drivers.  Quick response without hot start time, can shine in microseconds.  Low power consumption.  LED is semiconductor solid-state light source, anti-shock, waterproof, and high light efficiency.  Specifications:  Chip Type: CREE XP-E LED  Bulb Base: H3 PK22S  Chip Count: 10  Material: Plastic+PCB+Water Resistant Epoxy Cover, PBT, Aluminum  Wattage: 50W  Luminous Flux(lm): 2800-3100  Color Temperature(K): 6500-7500  Voltage: AC/DC 12-24V  Light Color: Yellow, White(optional)  Type: Turn Signal Light, Daytime Running Light, Fog Light  Primary Application: Motorcycle, Truck & Trailer, Car  Package Size: 11 * 8 * 2cm / 4.3 * 3.1 * 0.8in  Package Weight: 21g / 0.7oz    Package List:  1 * Car Signal Light   

  BID WITH CONFIDENCE, WE ARE VERIFIED!!! Features:  Made of CREE XP-E LED chips, high brightness and light weakness.  Consistent with the original car, do not change lines, a direct replacement for the original car glass bulb.  Lifetime up to 3-5 million hours while traditional bulbs are about two thousand hours.  Using the new IC drivers.  Quick response without hot start time, can shine in microseconds.  Low power consumption.  LED is semiconductor solid-state light source, anti-shock, waterproof, and high light efficiency.    Specifications:  Chip Type: CREE XP-E LED  Bulb Base: H7 Px26D  Chip Count: 10  Material: Plastic+PCB+Water Resistant Epoxy Cover, PBT, Aluminum  Wattage: 50W  Luminous Flux(lm): 2800-3100  Color Temperature(K): 6500-7500  Voltage: AC/DC 12-24V  Light Color: Yellow, White(optional)  Type: Turn Signal Light, Daytime Running Light, Fog Light  Primary Application: Motorcycle, Truck & Trailer, Car  Package Size: 11 * 8 * 2cm / 4.3 * 3.1 * 0.8in  Package Weight: 19g / 0.7oz    Package List:  1 * Car Signal Light 

  BID WITH CONFIDENCE, WE ARE VERIFIED!!! Features:  Made of CREE XP-E LED chips, high brightness and light weakness.  Consistent with the original car, do not change lines, a direct replacement for the original car glass bulb.  Lifetime up to 3-5 million hours while traditional bulbs are about two thousand hours.  Using the new IC drivers.  Quick response without hot start time, can shine in microseconds.  Low power consumption.  LED is semiconductor solid-state light source, anti-shock, waterproof, and high light efficiency.    Specifications:   Chip Type: CREE XP-E LED  Bulb Base: 9004 HB1 P29T  Chip Count: 10  Material: Plastic+PCB+Water Resistant Epoxy Cover, PBT, Aluminum  Wattage: 50W  Luminous Flux(lm): 2800-3100  Color Temperature(K): 6500-7500  Voltage: AC/DC 12-24V  Light Color: Yellow, White(optional)  Type: Turn Signal Light, Daytime Running Light, Fog Light  Primary Application: Motorcycle, Truck & Trailer, Car  Package Size: 11 * 8 * 4.5cm / 4.3 * 3.1 * 1.8in  Package Weight: 38g / 1.3oz    Package List:  1 * Car Signal Light 

Description: 1. Super bright & Low power consumption. 2. DC24V, applies truck or heavy track. Great option for turn signal lights and parking lights. 3. With a reflector, more safe, waterproof, shock and impact resistant. 4. Epoxy resin coated printed circuit boards. 5. Embedded installation, easy to use, high performance, cost effective. Specification: Color: Red + Yellow + Black Light Color: Red + Yellow LED Number: 8Leds / each light Voltage: 24V Size: approx. 148mm(L) x76mm(W) x23.5mm(H) Distance between two mount hole: 100mm Wire Length: 25cm Material: ABS Plastic Functions: Running light, Tail light, Turn signal light, Brake light Quantity: 2pcs (Left + Right) Wiring Connection: Black: Ground Green: Running Light /Tail Light (Red Low Beam) Red: Brake Light / Stop Light (Red High Beam) Yellow: Turn Signal Light (Yellow) Note: 1. (IMPORTANT) No Instructions Included.Professional Installation Is Highly Recommended. 2. Please check the size measurement chart carefully before making payment. 3. Please allow 0.5-1 inch difference due to manual measurement.(1 inch=2.54cm) 4. The color of the actual items may slightly different from the listing images due to different computer screen. Package Included: 2 X LED Trailer Tail Light (Left + Right)

Description: Made of LED chips, high brightness and light weakness. Consistent with the original car, do not change lines, a direct replacement for the original car glass bulb. Lifetime up to 2-5 million hours while traditional bulbs are about two thousand hours. Using the new IC drivers. Quick response without hot start time, can shine in microseconds. Low power consumption. LED is semiconductor solid-state light source, anti-shock, waterproof, and high light efficiency. Specification: Material: Plastic+PCB+Water Resistant Epoxy Cover, PBT, Aluminum Placement on Vehicle: Front Bulb Type: Headlight Type: Headlight Kit Voltage: 12V Light color: White Length: 75mm Quantity: One Chip Type: LED Bulb Base: BA20D Chip Count: 4 Hi/Lo: 10W Luminous Flux(lm): 1200LM Color Temperature(K): 5700-6200K Voltage: AC/DC 9-100V Type: Daytime Running Light, Headlight Primary Application: Motorcycle, Truck & Trailer, Car Note: 1.We provide clear pictures, measurements where possible. Please check as much as possible to make sure the item is the one that you need. 2. Please allow 0.5-1 inch difference due to manual measurement.(1inch=2.54cm) 3.Please check the LED light base type of your vehicle to confirm if the bulb will fit it. Package Included: 1 X LED Headlight Bulb