Dual h bridge

Description Overview This driver uses Infineon chips BTS7960 composed of high-power drive full H-bridge driver module with thermal over-current protection. Double BTS7960 H-bridge driver circuit, with a strong drive and braking, effectively isolating the microcontroller and motor driver! High-current 43A. Specifications Double BTS7960 large current (43 A) H bridge driver 5V Isolate with MCU, and effectively protect MCU 5V Power Indicator on Board Voltage Indication of Motor Driver Output end Can Solder Heat Sink Just need four lines from MCU to driver module (GND. 5V. PWM1. PWM2) Size: 4 x 5 x 1.2 cm; Able to reverse the motor forward, two PWM input frequency up to 25kHZ Two heat flow passing through an error signal output Isolated chip 5V power supply (can be shared with the MCU 5V), can also use the on-board 5V supply The supply voltage 5.5V to 27V Maximum Current: 43A Input level: 3.3V-5V More Products View More Products

10 Pcs L298N Dual H Bridge Stepper Motor Driver Board For Arduino DC Drive Controller Board  is available now from our  US  and  EU  warehouse   Excelent shipping to US and UK in  3-6  business days ship to Canada, Brazil in  7-10  days in US warehouse ship to European countries in  7-10  days in UK warehouse Description:   Double H bridge drive Chip: L298N (ST NEW) Logical voltage: 5V Drive voltage: 5V-35V Logical current: 0mA-36mA Drive current: 2A (MAX single bridge) Storage temperature: -20 to +135 Max power: 25W Weight: 30g Size: 43 x 43 x 27mm   Note:   This module has a built-in 5v power supply, when the driving voltage is 7v-35v, this supply is suitable for power supply, DO NOT input voltage to +5v supply interface, however ledding out 5v for external use is available. When ENA enable IN1 IN2 control OUT1 OUT2 When ENB enable IN3 IN$ control OUT3 OUT4   Note:  Package is not included the screws.   Package included:   10 x L298N Dual H Bridge Stepper Motor Driver Board For Arduino

DC Drive Controller Board is available now from our US and UK warehouse Excelent shipping to US and UK in 3-6 business days ship to Canada, Brazil in 7-10 days in US warehouse ship to European countries in 7-10 days in UK warehouse Description: Double H bridge drive Chip: L298N (ST NEW) Logical voltage: 5V Drive voltage: 5V-35V Logical current: 0mA-36mA Drive current: 2A (MAX single bridge) Storage temperature: -20 to +135 Max power: 25W Weight: 30g Size: 43 x 43 x 27mm Note: This module has a built-in 5v power supply, when the driving voltage is 7v-35v, this supply is suitable for power supply, DO NOT input voltage to +5v supply interface, however ledding out 5v for external use is available. When ENA enable IN1 IN2 control OUT1 OUT2 When ENB enable IN3 IN$ control OUT3 OUT4 Note:  Package is not included the screws. Package included: 1 x 236 L298N Dual H Bridge DC Stepper Motor Drive Controller Board Module arduino  

Description: Double H bridge drive Chip: L298N (ST NEW) Logical voltage: 5V Drive voltage: 5V-35V Logical current: 0mA-36mA Drive current: 2A (MAX single bridge) Storage temperature: -20 to +135 Max power: 25W Weight: 30g Size: 43 x 43 x 27mm Note: This module has a built-in 5v power supply, when the driving voltage is 7v-35v, this supply is suitable for power supply, DO NOT input voltage to +5v supply interface, however ledding out 5v for external use is available. When ENA enable IN1 IN2 control OUT1 OUT2 When ENB enable IN3 IN4 control OUT3 OUT4 Note: Package is not included the screws. Package included: 1 x 236 L298N Dual H Bridge DC Stepper Motor Drive Controller Board Module arduino

Buy L298N Dual H Bridge DC Stepper Motor Drive transistor for R69.00

Buy 10 Pcs Geekcreit L298N Dual H Bridge Stepper Motor Driver Board... for R549.00

Buy H Bridge Remote Control 5A 3V-14V Dual DC Motor Drive Module Voltage Reverse PWM Speed Regulation Do for R120.00

Buy 3pcs H Bridge Remote Control 5A 3V-14V Dual DC Motor Drive Module Voltage Rever for R449.18

Buy DC 5-12V 30A PWM Dual Channel Motor Control Module H Bridge Motor Drive Controller Board DHB-1A Reve for R532.00

DC MOTOR DRIVER; BB-L298 is dual full bridge driver with up to 2.5A and 7-40V.

Description: There are two L9110S motor control chip onboard This module can simultaneously drive two DC motors or a 4-wire 2-phase stepper motor Feature: Work under low static current Power supply voltage: DC 2.5V - 12V Each channel has 800mA continuous current output Low saturation pressure drop TTL / CMOS output level compatible, can be connected directly to the CPU Output built-in clamping diode, apply to the perceptual load Control and drive integrate in IC Pin high pressure protection function Working temperature: 0°C - 80°C Size: 29 x 21mm(L x W) Circuit diagram: Package included: 1 x L9110S stepper motor driver

Bridge Camera Bag Geometric w/Protective Neoprene Material, Rain Cover and Adjustable Dividers by USA Gear - Works W/Nikon Coolpix/Canon PowerShot/Sony Cyber-Shot/Panasonic Lumix & More Product Description | MULTIPLE POCKETS to provide ample space for your Nikon Coolpix B700, L340 / Sony RX10, HX400 / Panasonic Lumix LX100, FZ1000, FZ2000 / Canon G3X, SX420, SX 540 and more bridge cameras | WEATHER-RESISTANT Neoprene material and reinforced bottom secure your device. As an added bonus, the QIL also comes with a custom fit rain cover! | EASY-ACCESS DUAL ZIPPER design provides easy access to ensure that you never miss a shot | FLEXIBLE INTERIOR DIVIDER offers a custom fit for a variety of equipment. Also comes with a detachable, adjustable shoulder strap and carrying handle | BUY WITH CONFIDENCE with included 3 year manufacturer's warranty; Interior Dimensions: 6.5" x 5.5" x 4.5" ** Not meant for Full-Size DSLR Cameras - Please Check Dimensions **

Buy 3pcs Dual Channel L298N DC Motor Driver Board PWM Speed Dual H Bridge Stepper M for R167.89

Buy 20pcs Dual Channel L298N DC Motor Driver Board PWM Speed Dual H Bridge Stepper for R656.82

Description:   1. Use of professional motor driver chip, built-in low conduction internal resistance MOS switch tube, extremely small heat, no heat sink, small size, power saving, is your battery power ideal choice. 2. Double Road 2.5A*2, is 1.5A motor driven version of the enhancement, built-in overheating protection circuit, do not fear the motor plug burned, the temperature drop automatically restored. (current smart cars on the market, voltage and current are within this range) 3. small size, light weight, 0 standby current INx MCU, IO or other signal source, MOTOR-A and MOTOR-B terminals connected to the motor. DC motor drive logic truth table: Parameter:   1. double H bridge motor drive, can drive two DC motor or 1 4 wire two phase stepper motor; 2. module supply voltage 2V-10V; 3. signal terminal input voltage 1.8-7V; 4. single line operating current 2.5A, low standby current (less than 0.1uA); 5. built-in anti common conduction circuit, when the input is suspended, the motor will not malfunction; 6. built in overheating protection circuit with hysteresis effect (TSD), no need to worry about motor blocking; 7. product size: 31*32*5mm (length, width, height), ultra small volume, suitable for assembly and vehicle; 8. mounting hole diameter: 2 mm.   Attention:   1. the power supply positive and negative connection will certainly cause damage to the circuit. 2. output on the short circuit or output short-circuit, and motor stall conditions, the chip will heat protection, but in the near or above the 10V voltage and peak current greatly exceed the 2.5A case will cause chip burn. Package included: 1 x 2.5A Dual Motor Drive Module

Buy DC 3-36V 15A Peak 30A PWM DC Dual Channel Motor Driver Board High Power H Bridge Control Module for R570.00

Buy DC 3-36V 15A Peak 30A PWM DC Dual Channel Motor Driver Board Industrial Grade High Power H Bridge Co for R554.00

Buy L293D WiFi Smart Robot Car Motor Driver Expansion Board Dual High Power H Bridge Based On ESP12E SKU for R247.00