Common anode

Description: Name: 5MM full color dot matrix module Dimensions: 60*60MM. Can be driven by low voltage, low current glow. Package included: 1 x Three-color Common Anode RGB LED Dot Matrix Display Module Compatible Colorduino

Description: Name: 5MM full color dot matrix module Dimensions: 60*60MM. Can be driven by low voltage, low current glow. Package included: 3 x Three-color Common Anode RGB LED Dot Matrix Display Module Compatible Colorduino

Buy 3pcs 3.3V 5V 8 Bit Blue Common Anode LED Indicator Display Module DIY Kit for R210.00

Buy 1PC 0.36Inch 7 Segment 4 Digit Common Anode 0.36 Inch RED LED Digital Display... for R109.00

Buy 50PCS 10mm 4PIN Common Anode 20mA RGB LED Diode Light Transparent Round Light-E for R185.42

Buy 5pcs 3.3V 5V 8 Bit Blue Common Anode LED Indicator Display Module DIY Kit for R210.00

Buy 50PCS Frosted 10mm RGB LED Diode Lights Common Anode 20mA Tricolor Diffused Rou for R253.87

Buy 1Pcs 50101BS 5 inch LED Digital Tube One-digit Common Anode Bright Red Light for R324.00

Buy 3pcs 3.3V 5V 8 Bit Blue Common Anode LED Indicator Display Module DIY Kit for R197.37

Buy 3.3V 5V 8 Bit Blue/Red Common Anode/Cathode LED Indicator... (COLOR.: BLUE | VERSION1: COMMONANODE) for R186.00

Buy LED 5mm 3P CL-RED & GREEN COMMON ANODE RG509MF-A / 220789 for R1.76

Description: The module is a 12 foot with a clock point four common anode tube (0.36 inch) display module for driver IC TM1637, only two signal lines can make the MCU control 4 8 digital tube. Feature: Display common anode for the four red LED Digital tube 8 gray adjustable Level control interface for 5V or 3.3V 4 M2 screws positioning holes for easy installation Size: about 42 x 24 x 12mm Interface 4 digital display module: Control Interface: A total of four pins (GND, VCC, DIO, CLK), GND to ground, VCC is the power supply, DIO of data input and output pin, CLK is the clock signal pin; Digital tube: 4 common anode score points with 0.36 inches LED, red highlights; Positioning holes: 4 M2 screws positioning hole diameter is 2.2mm, the positioning of the module is easy to install, to achieve inter-module combination Package includes: 1 x LED Tube Module

Buy YwRobot Four Digital Tube Red LED Display Module Common Anode Electronic Building Block for R80.00

Buy 5Pcs 3161BS 0.36 inch LED Digital Tube One-digit Common Anode Bright Red Light for R134.14

Buy 5Pcs 2281BS 0.28 inch LED Digital Tube Two-digit Common Anode Bright Red Light for R184.00

Feature: Size: 8mm Shape: Round Emitted Colour: Red / Green / Blue Lens Color: Diffused Luminous Intensity: 200-300/800-100/300-400mcd Forward Voltage (V): 1.9-2.1v 3.0-3.4v View Angle: About 25 degree. Pins sequence: RED / Common Anode (positive terminal) / Green / Blue Maximum reverse voltage: VR 5 (v) Forward DC current: 20mA Description: Red 2.0V-2.2V minimum forward voltage, 20mA 622-625nm dominant wavelength Green 3.2V-3.4V minimum forward voltage, 20mA 520-525nm dominant wavelength Blue 3.0-3.2V minimum forward voltage, 20mA 465-468nm dominant wavelength Common Anode - LEDs share Ground (postive input), but have separate Vdd (negative input) Package includes: 60 x LED diodes

4 Digit 8 Segment Red LED Display Module Specification: Operating voltage: 3.3V - 5V Row needle leads to a common pin, include a VCC pin, and 4-bit driving pin (D1, D2, D3, D4), 8 segments drive pins (A, B, C, D, E, F, G, DP) Size: 33.5 (mm) x 21 (mm) Feature: - 0.36 inches of red common anode 4-segment digital tube - 4 8550 transistor parallel drive - 4-bit drivers current limiting resistor and eight segments driven current limiting resistor Package included: 1x Digital Tube Display Module

Extremely versatile power supply for passive RGB LED-projectors. Different standalone working modes: Hold mode: Instant access to 9 pre-programmed colors Static chase mode: 12 different color chases with manual speed control Sound chase mode: 12 different color chases with audio triggering Spectrum mix: 32 different spectrum mix colors, including nice color fades Adjustable speed and dimming with faders Slow color fades with adjustable fade time Blackout and 'Full on' function All functions can be controlled directly on the on the LED-Manager or by the optional LEDCON-01 remote. Several LED-Managers can be used in Master/slave mode to create high power, fully synchronized setups. 300Watt power: 2x 150W 24Vdc outputs. (R+G+B) with short-circuit protections Built-in Clock with battery backup and NiMH battery charger (batteries not included) 3 independent programmable on/off timers. (start/stop 3 different color chases at 3 different times!) Can be controlled by any standard DMX controller! 4 DMX channels needed: Ch1=red, Ch2=green, Ch3=Blue, Ch4=Dimmer/strobe. Enclosure prepared for easy installing against the wall. Fan cooling for extra reliability. Power Input: AC 230V~ 50Hz Fuse: 6,3A slow blow (20mm glass) Backup batteries: 3x 1,2V AA-type NiMH rechargeable batteries (optional) Output voltage to LEDs: DC 24V common anode Output power to LEDs: 2x 150W max. (Total = 300W max.) Red: 2x 50W max. (Total = 100W max.) Green: 2x 50W max. (Total = 100W max.) Blue: 2x 50W max. (Total = 100W max.) DMX connections: 3pin XLR (DMX-512 standard) DMX channels: 4 (CH1: red, CH2: green, CH3:blue, CH4:dimmer/strobe) Audio input: None, internal microphone Size: 330 x 202 x 106cm (see drawing below) Weight: 6,6kg

Multicolor plastic tubes with RGB LEDs inside, used to change the colors of walls, ceilings, etc. in all kinds of venues: bars, discotheques, taverns, shops, public places,... Infinite applications possible: fix the strips behind translucent plexi panels to create slowly changing colored surfaces, ceilings and walls... Different lengths (1m - 0,5m - 0,2m) each with very bright LEDs available. Each strip comes with 2 mounting clips and screws. Solid 4pin DIN-connectors with security lock. To be used with our LED-MANAGER (dmx power supply) Longlife LED Technology: > hours! Technical Information Connections: Special 4-pin connectors Extension cables: optionally available in 1m and 5m lengths Operation voltage: 24Vdc common anode Beam angle: 60deg Power consumption: LED STRIP 1m: 10Watt (144 LEDs) LED STRIP 0,5m: 5Watt (72 LEDs) LED STRIP 0,2m: 3Watt (24 LEDs) Size / Weight: LED STRIP 1m: D=30 x L=mm / 340g. LED STRIP 0,5m: D=30 x L=500mm / 200g. LED STRIP 0,2m: D=30 x L=200mm / 140g.

Extremely versatile power supply for passive RGB LED-projectors. Different standalone working modes: Fixed color mode: Instant access to 16 pre-programmed colors Auto chase mode: 16 different color chases with 8 different speeds. Sound chase mode: 16 different color chases with audio triggering Fade chase mode: 16 different color chases fading smoothly at 8 different speeds. Any wall-switch can be used to turn the output on/off, even when used in DMX-mode! All functions can be controlled: Directly on the on the Mini Led Manager With an optional LED WALL DIMMER (special interface) With an optional LEDCON-02 remote With a 300Watt LED Manager By any standard DMX-controller Several Mini Led Managers can be used in Master/slave mode to create high power, fully synchronized setups. 100Watt power 24Vdc output. (R+G+B) with short-circuit protections 4 DMX channels needed: Ch1=red, Ch2=green, Ch3=Blue, Ch4=Dimmer/strobe. Enclosure prepared for easy installing against the wall. No fan cooling: completely silent! Power Input: AC V (50Hz/60Hz) Output voltage to LEDs: DC 24V common anode Output power to LEDs: 1x 100W max (Red: 33W max., Green: 33W max., Blue: 33W max.) DMX connections: 3pin XLR (DMX-512 standard) DMX channels: 4 (CH1: red, CH2: green, CH3:blue, CH4:dimmer/strobe) Audio input: Internal microphone Size: 356 x 132 x 43mm Weight: 1,70kg (Mini LED Manager Mk2)

Product Description: Extremely versatile power supply for all kinds of passive RGB LED-projectors. Different standalone working modes: Hold mode: Instant access to 9 pre-programmed colours Static chase mode: 12 different colour chases with manual speed control Sound chase mode: 12 different colour chases with audio triggering Spectrum mix: 32 different spectrum mix colours, including nice colour fades Adjustable speed and dimming with faders Slow color fades with adjustable fade time Blackout and “Full on” function All functions can be controlled directly on the on the LED-Manager or by the optional LEDCON-01 remote. Several LED-Managers can be used in Master/slave mode to create high power, fully synchronized setups. 300Watt power: 2x 150W 24Vdc outputs. (R+G+B) with short-circuit protections Built-in Clock with battery backup and NiMH battery charger (batteries not included) 3 independent programmable on/off timers. (start/stop 3 different colour chases at 3 different times!) Can be controlled by any standard DMX controller! 4 DMX channels needed: Ch1=red, Ch2=green, Ch3=Blue, Ch4=Dimmer/strobe. Enclosure prepared for easy installing against the wall. Fan cooling for extra reliability. Technical Information: Power Input: AC 230V~ 50Hz Fuse: 6,3A slow blow (20mm glass) Backup batteries: 3x 1,2V AA-type NiMH rechargeable batteries (optional) Output voltage to LEDs: DC 24V common anode Output power to LEDs: 2x 150W max. (Total = 300W max.) Red: 2x 50W max. (Total = 100W max.) Green: 2x 50W max. (Total = 100W max.) Blue: 2x 50W max. (Total = 100W max.) DMX connections: 3pin XLR (DMX-512 standard) DMX channels: 4 (CH1: red, CH2: green, CH3:blue, CH4:dimmer/strobe) Audio input: None, internal microphone Size: 330 x 202 x 106cm (see drawing below) Weight: 6,6kg 6 months limited guarantee. For more info on this product please click here

Product Description: Multicolor plastic tubes with RGB LEDs inside, used to change the colors of walls, ceilings, etc. in all kinds of venues: bars, discotheques, taverns, shops, public places, … Infinite applications possible: fix the strips behind translucent plexi panels to create slowly changing colored surfaces, ceilings and walls… Different lengths (1m – 0,5m - 0,2m) each with very bright LEDs available. Each strip comes with 2 mounting clips and screws. Solid 4pin DIN-connectors with security lock. To be used with our LED-MANAGER (dmx power supply) Longlife LED Technology: > hours! Technical Information: Connections: Special 4-pin connectors Extension cables: optionally available in 1m and 5m lengths Operation voltage: 24Vdc common anode Power consumption: LED STRIP 1m: 10Watt (144 LEDs) Size / Weight:    LED STRIP 1m: D=30 x L=mm / 340g. 6 months limited guarantee. For more info on this product please click here

Product Description: Multicolor plastic tubes with RGB LEDs inside, used to change the colors of walls, ceilings, etc. in all kinds of venues: bars, discotheques, taverns, shops, public places, … Infinite applications possible: fix the strips behind translucent plexi panels to create slowly changing colored surfaces, ceilings and walls… Different lengths (1m – 0,5m - 0,2m) each with very bright LEDs available. Each strip comes with 2 mounting clips and screws. Solid 4pin DIN-connectors with security lock. To be used with our LED-MANAGER (dmx power supply) Longlife LED Technology: > hours! Technical Information: Connections: Special 4-pin connectors Extension cables: optionally available in 1m and 5m lengths Operation voltage: 24Vdc common anode Power consumption: LED STRIP 0,5m: 5Watt (72 LEDs) Size / Weight:    LED STRIP 0,5m: D=30 x L=500mm / 200g. 6 months limited guarantee. For more info on this product please click here

Features: 20Key infrared Music LED controller adopts the advanced micro control unit. It is used for controlling a variety of LED lamp. For instance, point-source light, flexible strip light, wall washer light, glass curtain wall light and so on; it has many advantages such as low cost, convenient connection and ease of use. Meanwhile you could adjust brightness, static colors and color changing effects via infrared remote control. When it is in sound-control mode, the colors will change with the music rhythm. Specifics: Working temperature:-20°C ~60°C Input voltage: DC12-24V Output: 3 channels Connecting mode: Common anode External dimension: L63*W35*H22mm Packing size: L215*W115*H25mm Net weight: 50g Gross weight: 66g Static power consumption: Output current: Output power: Direction for use: 1.Connect the load lines and power lines, make sure all connection correct before power switched on. 2.Insure there is no obstacle between the IR controller and the receiver when operating. 3.This product should not be used in outdoor and any other humid environment.Not allowed to touch water or any liquid. No impacting and knocking. Should not be used in high temperature and high pressure environment to avoid the product damage, and cause short-circuit, fire disaster and electric shock etc. Package Included: 1x RGB Controller 1x 20Key Remote (No battery with remote, RC2025 is required) We are Located at: 3 Aster Ave Sunridge Park across the road from the Sunridge village Operating times Monday to Thursday - 8:30 to 18:00 Friday - 8:30 to 12:15 and reopen from 14:15 to 18:00 Saturday - 8:30 to 15:30

This wireless remote control for RGB LEDs (strips, bulbs) has a remote control distance up to 30 meters and a 2.4GHz Touch control - an all in one RGB LED controller. Control Your LEDs With the wirless remote control of RGB Leds, you can change the color and mode for LED strips and bulbs. This universal remote can work with many different types of LEDs so long as they are capable of switching colors. Use it at your nightclub, bar, home, theatre, store, shop, convention, event, party, exhibition or show. It has a control distance of up to 30 meters plus a 2.4GHz touch pad, making it an easy to use, all in one RGB LED controller. At a Glance... Wireless RGB Works For Many LEDs Distance up to 30 Meters 2.4GHz Touch Screen Manufacturer Specifications Controller Working Voltage: DC 12V ~ 24V RGB Colors Maximum Load Per Channel: 6A Total Output Current: 18A Output Connection: Common Anode (+) Control Distance: 30 Meters Remote Distance: 30 Meters Power: 2x AAA battery Material: ABS LED Control Dimensions LED Control Dimensions: 85x43x22mm (L x W x D) LED Control Weight: 44g Touch RF Remote Dimensions Touch RF Remote Dimensions: 110x52x20mm (L x W x D) Touch RF Remote Weight: 47g Product Notes Can be used with a large variety of LED Lights. Batteries not included. Package Contents LED Control + Touch RF Remote User Manual

  There is an upper computer in the programmable time controller to make the load output change over time, customer can customize schedule mode they want through the upper PC.   Specification Power 240 Rate Voltage 12~24V Working Current 20A Dimmable no Connector Type Others Emitter Type Others Total Emitters 0 Color BIN Others Color Temperature Others Other Features Other Features Working temperature: -20C~60C; Supply voltage: DC 12~24V; Output: 5 channels Output: Five CMOS drain -open output Connecting Mode: Common anode Max load current: 4A each color

RGB Mini Controller and 24 key remote IR: Used in combination with RGB Led Strip Lights to control the colour and modes. Specifications: Size: 85 x 51 x 6mm Type:24Key Remote Controller Connection mode: Common Anode(+) Powered by: 1 x button cell (CR2032) Input/Output: 12V Max load current: 2A each color Output: three CMOS drain-open output Working Temperature: -20C-60C Mode & Pattern: 16 colors, 5 light pattern: Static/Flash/Strobe/Fade-change/RGB Smooth-change 16-classes Static Mode Dim Control 16-Speeds Control in Flash / Strobe / Fade-change / RGB Smooth-change Control range: 10cm - 1000cm RGB LED Strips Support 10 meters SMD 5050 30LEDs/M LED Strips or 5 meters SMD 5050 60LEDs / M LED Strips

TB6600 Upgraded Version 32 Segments 4A 40V 57/86 Stepper Motor Driver Feature: 9V-40V DC power supply H-bridge bipolar constant phase flow driver The maximum output current is 4.0A (eight optional) Up to 32 segments of six kinds of sub-modes available The input signal high-speed photoelectric isolatio Standard common anode single pulse interface Offline keep function Semi-enclosed chassis can adapt to a more demanding environment Provide energy saving semiautomatic current lock function Built-in thermal protection and over-current protection Specification: Voltage: up to 50V ON resistance (upper + lower) = 0.4 Ω Forward and reverse rotation control 5 kinds of sub-modes selectable (1/1, 1/2, 1/4, 1/8, 1/16 step) Output current: IOUT = 5.0A (peak within 100ms) Rated output: IOUT = 4.5 A Input pull-down resistor: 100 KΩ Current output alarm pin: Ialert = 1mA Monitor output pin (MO): Imo = 1mA With reset and enable pins With a standby function. Breaking the traditional single-supply Built-in thermal protection (TSD) circuit Built-in voltage protection (UVLO) circuit Built-in over current detection (ISD), the circuit Note: This driver is the upgraded version TB6600, heightening segment to 32 subdivision, suitable for high segmentation applications. For step motor: 42, 57, 86 type 2 phase 4 phase (4 / 6 / 8 line) Package included: 1 x TB6600 Stepper Motor Driver Controller

RED 7 SEGMENT LED DISPLAY; COMMON ANODE; CHARACTER HEIGHT OF 12.7mm SA05-11EWA