Chronos pci

Features: Maximum data transfer rate of 460Kbps 256-byte deep FIFO per transmitter and receiver Compliant with PCI Local Bus Specification 2.3 Configurable in 5V, 12V, and RI (non-powered) modes Selectable power output on pin 9 for the serial port Supports 32-bit Bus/33/66MHz Supports PCI Power Management 1.1

Features: 32 bit PCI Bus, PCI Specification 2.1 Serial EEPROM interface Single 5-V Operation Low Power PCI compatible Dual UART 16 byte transmit-receive FIFO (UART) Selectable receive trigger levels Programmable baud rate generator Modem control signals Bit characters selection Even, Odd, No parity, or Force parity generations Compatible with 16C550 Fast data rates up to 1 Mbytes/s (serial ports) On chip oscillator Software programmable mode selects 128-pin QFP package Plug and Play for Windows , IRQ Sharing, No Jumper setting Set the I/O addresses automatically Supports MS-DOS, Windows SE/ME//XP,Windows NT 4.x PARALLEL PORT FEATURES Uses UART FIFO 16C550 COM B connector uses DB 9 pin(default) COM A connector uses DB 9 pin Support Re-map to ISA address 3F8,2F8,3E8,2E Only)

Features Fully compliant with one-lane 2.5Gb/s PCI Express specification Compliant with Serial ATA 1.0 specifications Serial ATA Generation 2 transfer rate of 3.0 Gb/s Supports two independent Serial ATA and one independent PATA channels Hot plug for extend Serial ATA port Supports RAID ,  JBOD function Supports Serial ATA II Port-Multiplier specifications Supports Windows and Linux O.S Interface: One-lane PCI Express  Type: Serial ATA Generation 2  Mode: RAID ,JBOD function  OS Support: Windows /XP/, and Linux 2.4.x, 2.6.x.  1 internal/1 external  Serial ATA II Ports + 1 internal PATA Ports  Independent Link, transport, and data FIFO  Independent command fetch, scatter/gather, and command execution Hard coded state machines - no code space or download  Supports Legacy Command Queuing(LCQ)  Supports Native Command Queuing(NCQ)  Supports Non-zero offsets NCQ  Supports Out of order data delivery NCQ  Supports FIS-based switching with Port Multipliers  Supports DMA6 transfer mode of PATA

Features: 32 bit PCI Bus, PCI Specification 2.1 Single 5-V Operation Low Power Selectable receive trigger levels Fast data rates up to 1.5 Mbytes/s (parallel port) 16 Byte FIFO (parallel) Software programmable mode selects 128-pin QFP package Plug and Play for Windows , IRQ Sharing, No Jumper setting Set the I/O addresses automatically Supports MS-DOS, Windows ,Windows NT 4.x,Windows /XP PARALLEL PORT FEATURES Support Re-map to ISA address The Parallel Port can support the extension of the following products: Tape driver,CD-ROM driver, Printer, Parallel Port, SCSI Adapter, Zip Driver,External LAN Adapter,and Scanner. Supports IEEE standard DB-25 pin female centronic connector

Features Single independent RS-232 serial ports with communication speeds up to ) Kbps Designed to meet PCI-Express Base Specification Revision 1.1 Support x1, x2, x4, x8, x16 (lane) PCI-Express Bus connector keys High speed 16C950 compatible UART controller on-board On-chip hardware auto flow control to guarantee on data loss Built-in 128K byte DMA software FIFO Certified by Microsoft WHQL, CE, FCC approval Support DOS, Microsoft Windows / XP / and Vista Ready of the intel and AMD -bit CPU System Specification Interface: RS-232 Controller: OXFORD OXPCle952 Bus: PCI-Express one lane (x1) Bus No. of port: 1/2 ports Port Type: DB9 Male IRQ & IO: Assigned by system FIFO: 128K byte DMA FIFO Baud rate: 96bps ~ ) Kbps Flow Control: None, Xon / Xoff, RTS / CTS Driver Support Microsoft: Windows / XP / and Vista (-bit) Linux: Kernel 2.6x DOS: DOS

2 independent RS-232 serial ports with communication speeds up to ) Kbps Designed to meet PCI-Express Base Specification Revision 1.1 Support x1, x2, x4, x8, x16 (lane) PCI-Express Bus connector keys High speed 16C950 compatible UART controller on-board On-chip hardware auto flow control to guarantee on data loss Built-in 128K byte DMA software FIFO Certified by Microsoft WHQL, CE, FCC approval Support DOS, Microsoft Windows / XP / and Vista Ready of the intel and AMD -bit CPU System Specification Interface: RS-232 Controller: OXFORD OXPCle952 Bus: PCI-Express one lane (x1) Bus No. of port: 1/2 ports Port Type: DB9 Male IRQ & IO: Assigned by system FIFO: 128K byte DMA FIFO Baud rate: 96bps ~ ) Kbps Flow Control: None, Xon / Xoff, RTS / CTS Driver Support Microsoft: Windows / XP / and Vista (-bit) linux: Kernel 2.6x DOS: DOS Regulatory Approvals Hardware: CE, FCC Software: WHQL Operation Environment Operation Temperature: 0 to 60°C Operation Humidity: 5 to 95% RH

Features Single IEEE Parallel ports with communication speeds up to 15Mbps/s Designed to meet PCI-Express Base Specification Revision 1.1 Supports x1,x2,x4,x8,x16 lane PCI-Express Bus connector keys Supper IEEE Parallel ports standard ECP (Enhance Capacity Port) / EPP (Enhance Parallel Port) SPP (Standard Parallel Port) Built-in 32 byte hardware FIFO Certified by Microsoft WHQL, CE, FCC approval Support DOS, Linux, Microsoft Windows /XP/ and Vista Ready of the Intel and AMD -bit CPU System Specification Interface: Parallel Controller: OXFORD OXPCIe840 Bus: PCI-Express one lane ¿x1¿Bus No. of port: 1ports Port Type: DB25 Female IRQ IO: Assigned by System FIFO: 32 byte Hardware Baud Rate: up to 15Mbps Mode: SPP/EPP/ECP Driver Support Microsoft: Windows / XP / and Vista (-bit) Linux: Kernel 2.6x DOS: DOS

Supports PCI Express Base Specification Revision 2.0 Single-lane (x1) PCI Express throughput rates up to 5 Gbps Compliant with Universal Serial Bus 3.0 specification Revision 1.0 Compliant with xHCI (eXtensibleHost Controller Interface) specifications Revision 0.95 Supports simultaneous operation of multiple USB 3.0, USB 2.0 and USB 1.1 devices Supports USB data transfer rate of Mbps Expands two external USB3.0 Super-Speed ports on the system Each USB port supplies maximum +5V / 900mA power output to USB device Built-in 4-pin power connector for receiving extra power supply from system Hot-swapping feature allows you to connect/disconnect devices without powering down the system Driver supports for Microsoft Windows , XP, Vista, and 7 operation system Certified by CE, FCC, RoHS, and Microsoft WQHL approval Interface: PCI-E X1 Mode: USB3.0 Controller: NEC µPD Port: 2 external USB3.0 ports Speed: Data Transfer rate of Mbps Low Speed (1.5Mbps), Full Speed(12Mbps), High Speed(480Mbps), Super Speed(5Gpbs) Power Output: +5V / 900mA O.S. support: Windows/XP//Vista/-bit) Environment: Operation temp. 0 °C 57 °C Operation humidity: 5 95% RH Storage temp.-20 °C 85 °C