Chronos pci port

Features: 32 bit PCI Bus, PCI Specification 2.1 Single 5-V Operation Low Power Selectable receive trigger levels Fast data rates up to 1.5 Mbytes/s (parallel port) 16 Byte FIFO (parallel) Software programmable mode selects 128-pin QFP package Plug and Play for Windows , IRQ Sharing, No Jumper setting Set the I/O addresses automatically Supports MS-DOS, Windows ,Windows NT 4.x,Windows /XP PARALLEL PORT FEATURES Support Re-map to ISA address The Parallel Port can support the extension of the following products: Tape driver,CD-ROM driver, Printer, Parallel Port, SCSI Adapter, Zip Driver,External LAN Adapter,and Scanner. Supports IEEE standard DB-25 pin female centronic connector

Features: Maximum data transfer rate of 460Kbps 256-byte deep FIFO per transmitter and receiver Compliant with PCI Local Bus Specification 2.3 Configurable in 5V, 12V, and RI (non-powered) modes Selectable power output on pin 9 for the serial port Supports 32-bit Bus/33/66MHz Supports PCI Power Management 1.1

Features Fully compliant with one-lane 2.5Gb/s PCI Express specification Compliant with Serial ATA 1.0 specifications Serial ATA Generation 2 transfer rate of 3.0 Gb/s Supports two independent Serial ATA and one independent PATA channels Hot plug for extend Serial ATA port Supports RAID ,  JBOD function Supports Serial ATA II Port-Multiplier specifications Supports Windows and Linux O.S Interface: One-lane PCI Express  Type: Serial ATA Generation 2  Mode: RAID ,JBOD function  OS Support: Windows /XP/, and Linux 2.4.x, 2.6.x.  1 internal/1 external  Serial ATA II Ports + 1 internal PATA Ports  Independent Link, transport, and data FIFO  Independent command fetch, scatter/gather, and command execution Hard coded state machines - no code space or download  Supports Legacy Command Queuing(LCQ)  Supports Native Command Queuing(NCQ)  Supports Non-zero offsets NCQ  Supports Out of order data delivery NCQ  Supports FIS-based switching with Port Multipliers  Supports DMA6 transfer mode of PATA

Features Single IEEE Parallel ports with communication speeds up to 15Mbps/s Designed to meet PCI-Express Base Specification Revision 1.1 Supports x1,x2,x4,x8,x16 lane PCI-Express Bus connector keys Supper IEEE Parallel ports standard ECP (Enhance Capacity Port) / EPP (Enhance Parallel Port) SPP (Standard Parallel Port) Built-in 32 byte hardware FIFO Certified by Microsoft WHQL, CE, FCC approval Support DOS, Linux, Microsoft Windows /XP/ and Vista Ready of the Intel and AMD -bit CPU System Specification Interface: Parallel Controller: OXFORD OXPCIe840 Bus: PCI-Express one lane ¿x1¿Bus No. of port: 1ports Port Type: DB25 Female IRQ IO: Assigned by System FIFO: 32 byte Hardware Baud Rate: up to 15Mbps Mode: SPP/EPP/ECP Driver Support Microsoft: Windows / XP / and Vista (-bit) Linux: Kernel 2.6x DOS: DOS

Features: 32 bit PCI Bus, PCI Specification 2.1 Serial EEPROM interface Single 5-V Operation Low Power PCI compatible Dual UART 16 byte transmit-receive FIFO (UART) Selectable receive trigger levels Programmable baud rate generator Modem control signals Bit characters selection Even, Odd, No parity, or Force parity generations Compatible with 16C550 Fast data rates up to 1 Mbytes/s (serial ports) On chip oscillator Software programmable mode selects 128-pin QFP package Plug and Play for Windows , IRQ Sharing, No Jumper setting Set the I/O addresses automatically Supports MS-DOS, Windows SE/ME//XP,Windows NT 4.x PARALLEL PORT FEATURES Uses UART FIFO 16C550 COM B connector uses DB 9 pin(default) COM A connector uses DB 9 pin Support Re-map to ISA address 3F8,2F8,3E8,2E Only)

Features Single independent RS-232 serial ports with communication speeds up to ) Kbps Designed to meet PCI-Express Base Specification Revision 1.1 Support x1, x2, x4, x8, x16 (lane) PCI-Express Bus connector keys High speed 16C950 compatible UART controller on-board On-chip hardware auto flow control to guarantee on data loss Built-in 128K byte DMA software FIFO Certified by Microsoft WHQL, CE, FCC approval Support DOS, Microsoft Windows / XP / and Vista Ready of the intel and AMD -bit CPU System Specification Interface: RS-232 Controller: OXFORD OXPCle952 Bus: PCI-Express one lane (x1) Bus No. of port: 1/2 ports Port Type: DB9 Male IRQ & IO: Assigned by system FIFO: 128K byte DMA FIFO Baud rate: 96bps ~ ) Kbps Flow Control: None, Xon / Xoff, RTS / CTS Driver Support Microsoft: Windows / XP / and Vista (-bit) Linux: Kernel 2.6x DOS: DOS

2 independent RS-232 serial ports with communication speeds up to ) Kbps Designed to meet PCI-Express Base Specification Revision 1.1 Support x1, x2, x4, x8, x16 (lane) PCI-Express Bus connector keys High speed 16C950 compatible UART controller on-board On-chip hardware auto flow control to guarantee on data loss Built-in 128K byte DMA software FIFO Certified by Microsoft WHQL, CE, FCC approval Support DOS, Microsoft Windows / XP / and Vista Ready of the intel and AMD -bit CPU System Specification Interface: RS-232 Controller: OXFORD OXPCle952 Bus: PCI-Express one lane (x1) Bus No. of port: 1/2 ports Port Type: DB9 Male IRQ & IO: Assigned by system FIFO: 128K byte DMA FIFO Baud rate: 96bps ~ ) Kbps Flow Control: None, Xon / Xoff, RTS / CTS Driver Support Microsoft: Windows / XP / and Vista (-bit) linux: Kernel 2.6x DOS: DOS Regulatory Approvals Hardware: CE, FCC Software: WHQL Operation Environment Operation Temperature: 0 to 60°C Operation Humidity: 5 to 95% RH

Supports PCI Express Base Specification Revision 2.0 Single-lane (x1) PCI Express throughput rates up to 5 Gbps Compliant with Universal Serial Bus 3.0 specification Revision 1.0 Compliant with xHCI (eXtensibleHost Controller Interface) specifications Revision 0.95 Supports simultaneous operation of multiple USB 3.0, USB 2.0 and USB 1.1 devices Supports USB data transfer rate of Mbps Expands two external USB3.0 Super-Speed ports on the system Each USB port supplies maximum +5V / 900mA power output to USB device Built-in 4-pin power connector for receiving extra power supply from system Hot-swapping feature allows you to connect/disconnect devices without powering down the system Driver supports for Microsoft Windows , XP, Vista, and 7 operation system Certified by CE, FCC, RoHS, and Microsoft WQHL approval Interface: PCI-E X1 Mode: USB3.0 Controller: NEC µPD Port: 2 external USB3.0 ports Speed: Data Transfer rate of Mbps Low Speed (1.5Mbps), Full Speed(12Mbps), High Speed(480Mbps), Super Speed(5Gpbs) Power Output: +5V / 900mA O.S. support: Windows/XP//Vista/-bit) Environment: Operation temp. 0 °C 57 °C Operation humidity: 5 95% RH Storage temp.-20 °C 85 °C

Share up to 4 USB 2.0 devices with the support of USB 2.0 Hub extension Share USB 2.0 devices through your existing office or home IP network Allows multiple users to share a Multi-Function Printer (MFP) over the network to print, scan, and fax from any networked computer Allows multiple users to share an external hard drive, flash drive or memory card reader over the network Friendly user interface software to help user to connect the device easily Intuitive GUI allows for easy configuration, monitoring, and firmware upgrade Remote web management capability PC-independent sharing saves power over time Backward compatible to USB 1.1 devices Network Protocol TCP/IP Ethernet Mbps,RJ45 Power Input DC 5V Interface USB Controller Elite EM4 No. of port 4 ports Port Type USB Type A Speed up to 480Mbps IRQ & IO Assigned by System

The Chronos USB 2.0 Analog TV Dongle allows you to watch TV on your PC. With full on screen display and scheduled recording, this USB adapter turns your PC into a personal video recorder. Other features include full screen display, screen capture, time-shifting live TV, and it sports Video (AV/SVHS) and Audio inputs. Specifications Tuner Silicon Tuner Support Analog TV Standard PAL BG/DK/I/M/N & NTSC Operating Temperature: 0¿ ~ 50¿ (Case temperature) Accessories Multi Video Input Cable Remote controller with battery User Manual Software CD Case Size Length: 90 mm Width: 30 mm High: 15.5 mm Weight 80g (net; without accessories) 450g (gross; total package) Power consumption 2.5W DC 5V / 500mA (Powered by USB bus) Hardware I/O TV input S-VHS input Composite input Audio input (RCA L/R) System Requirements Windows XP+Service Pack 2 Intel Pentium IV 1.5GHz or higher processor (Centrino 1.2GHz) A free USB 2.0 port 512MB RAM or above 1G HD space for Software operation (Recording/Time-shifting) Microsoft DirectX 9.0C CD-ROM drive TV signal source (Cable or antenna)

Buy PCI 4 PORT + 1 INTERNAL USB2.0 CARD - 12 Month Carry-In for R129.00

PCI-E Card to 4x USB-a ports     Specifications USB 2.0 Card Transfer Rate each Port 480Mbps External PORT: USB-A X 4 Internal PORT: USB-A / Pin Header 1 x PORT    

I'm selling a PCI add-on card.   It has 1 port on the card and a e-sata port at the back   Bought it new and never used it, Its great if you want to put in that one extra harddrive but dont have any sata ports left   Thanks

Internal PCI card for desktop computers and X1 parallel port for printers or other devises. Driver cd software included Support all windows    

Inno3D PCIe graphics card with 1 GB DDR3 memory and VGA, DVI and HDMI display port. Good working condition.