Celestron digital

Celestron Digital Camera Adaptor Product Info Celestron introduces digital camera adapter universal 93626. Celestron digital camera adapter 93626 is an universal mounting platform that allows you to do afocal photography (photography through the eyepiece of a telescope) using a 1-1/4" or 2" eyepiece. Note: not recommended for slr cameras or digital point and shoot cameras with more than 3x or 4x optical zoom. Package Contents: Celestron Digital Camera Adaptor

Celestron Universal Digiscoping Adapter The Celestron Digital Camera Adapter places your various point-&-shoot digital cameras close to the eyepiece of your spotting scope. It has a clamp for the eyepiece and various location adjustments so that you get the digital camera centered exactly where it needs to be for the best images with high resolution and no vignetting. As with all digiscoping, it is far easier to align the digital camera's lens with the scope's eyepiece when that eyepiece has a broad, flat rear element-making a bigger target for the camera's vision to fit within.To describe here exactly which cameras work with this is simply impossible, but for some guidance...the shortest distance between the tripod socket and the center of the eyepiece is approximately 1.26" (32mm), while the longest distance between the center of the eyepiece and the tripod socket is approximately 2.91" (74mm). The tripod socket can be as far as approximately 2.12" (54mm) to either side of the center of the eyepiece, so as long as the distance between your camera's tripod socket and the center of its lens is less than this it should likely fit.As with all ventures in the world of digiscoping, you'll need to employ good technique and good equipment to get good pictures-which means a sturdy tripod and secondary support for the camera if possible, a sensibly-high shutter speed for the digital camera and as much care as is possible to prohibit camera movement. This should always include the use of the camera's electronic shutter release cable or remote control if the camera has such capacity.Note: A tripod spacer-like that used under traditional film cameras with Polariod film backs-is often necessary for vertical alignment of cameras with a short distance between their tripod socket and the center of their lens. An inexpensive combination of 2 pieces of inventory to solve the problem (B&H item codes "BO3358" and "GIG1141") is listed here as accessories. Attaches directly to eyepieces with 1.18-2.36" (30-60mm) outer diameter Camera's height to eyepiece adjustable in ±1.18" (±30mm) range Camera's tripod socket adjustable in ±1.65" (±42mm) range Includes 1/4"-20 threaded tripod socket upon base for added support

Celestron Universal Digiscoping Adapter The Celestron Digital Camera Adapter places your various point-&-shoot digital cameras close to the eyepiece of your spotting scope. It has a clamp for the eyepiece and various location adjustments so that you get the digital camera centered exactly where it needs to be for the best images with high resolution and no vignetting. As with all digiscoping, it is far easier to align the digital camera's lens with the scope's eyepiece when that eyepiece has a broad, flat rear element-making a bigger target for the camera's vision to fit within.To describe here exactly which cameras work with this is simply impossible, but for some guidance...the shortest distance between the tripod socket and the center of the eyepiece is approximately 1.26" (32mm), while the longest distance between the center of the eyepiece and the tripod socket is approximately 2.91" (74mm). The tripod socket can be as far as approximately 2.12" (54mm) to either side of the center of the eyepiece, so as long as the distance between your camera's tripod socket and the center of its lens is less than this it should likely fit.As with all ventures in the world of digiscoping, you'll need to employ good technique and good equipment to get good pictures-which means a sturdy tripod and secondary support for the camera if possible, a sensibly-high shutter speed for the digital camera and as much care as is possible to prohibit camera movement. This should always include the use of the camera's electronic shutter release cable or remote control if the camera has such capacity.Note: A tripod spacer-like that used under traditional film cameras with Polariod film backs-is often necessary for vertical alignment of cameras with a short distance between their tripod socket and the center of their lens. An inexpensive combination of 2 pieces of inventory to solve the problem (B&H item codes "BO3358" and "GIG1141") is listed here as accessories. Attaches directly to eyepieces with 1.18-2.36" (30-60mm) outer diameter Camera's height to eyepiece adjustable in ±1.18" (±30mm) range Camera's tripod socket adjustable in ±1.65" (±42mm) range Includes 1/4"-20 threaded tripod socket upon base for added support

The Celestron Microscope Microdirect 1080P HDMI Handheld Digital Microscope is a compact magnifying tool that offers handheld and stand-mounted operating options. Using the included wide stand, you can adjust and secure a working distance and horizontal position above your sample.The base also provides two clips to hold your slides or flat samples. With its high-resolution 3.5MP imaging sensor and an LED illumination ring, you can capture bright and crisp images and 30 fps videos. Optimized for 3D examinations, this kit also can be useful to study miniature artifacts by bumping up the magnification power to 220x on a 20" monitor.The device also provides options for streaming videos out via its mini-USB or mini-HDMI ports, saving your visual data to a 32GB microSD slot, and controlling shutter speeds manually or through your PC.Celestron's MicroDirect 1080P HDMI Handheld Digital Microscope is a compact magnifying tool that offers handheld and stand-mounted operating options. Using the included wide stand, you can adjust and secure a working distance and horizontal position above your sample. The base also provides two clips to hold your slides or flat samples.With the Celestron Microscope Microdirect 1080P HDMI high-resolution 3.5MP imaging sensor and an LED illumination ring, you can capture bright and crisp images and 30 fps videos. Optimized for 3D examinations, this kit also can be useful to study miniature artifacts by bumping up the magnification power to 220x on a 20" monitor.The device also provides options for streaming videos out via its mini-USB or mini-HDMI ports, saving your visual data to a 32GB microSD slot, and controlling shutter speeds manually or through your PC. Sensor, Optical System, & Illumination 3.5MP, 1/3" CMOS sensor10x - 220x magnification Shutter can be controlled manually or from PC Focusing range from 0 to 1.4" LED ring illuminator Photo/Video Capture, Memory, & Ports Streams 1080p videos via a mini-HDMI port at 30 fps Captures 30 fps AVI videos: HD 720p, 640 x 480 Saves visual data to a PC or a built-in microSD card Captures interpolated JPEG photos with resolution of up to 14.0 MP or 5120 x 2880 Mini-HDMI video out port for direct streaming to HDTV displays Mini-USB port allows connectivity to your PC Stage, Focusing, and Construction Handheld or mounted operation Pillar-type frame: stable base and two metal clips Rod allows adjusting height (working distance) and horizontal position Coarse-focusing adjustment with a knurled knob on the post Fine-focusing wheel is built into the microscope body. SPECIFICATIONS Image Sensor Type: 3.5 MP, 1/3" CMOS sensor 2.2 x 2.3 µmImage Sensor Type: 3.5 MP, 1/3" CMOS sensor 2.2 x 2.3 µm Still Image Capture: 14 MP: 5120 x 720 (maximum resolution), interpolated Format: JPEG Streaming Capability 1080p: 1920 x 1080 @ 30 fps Video Capture HD: 720p @ 30 fps; VGA: 640 x 480 @ 30 fps Format: AVI Magnification: 10 - 220x External Memory microSD slot: 32 GB Focus Range: 0 - 1.4" / 35 mm Shutter: Manual and PC-controlled Power: USB 2.0 port OS Compatibility: Windows XP/7/8/10, or later (Not compatible with Mac) Multi-language Support: English, German, Spanish, Russian, Italian, French, Portuguese, Dutch, Polish, Japanese, Korean, Chinese Dimensions Microscope:  56 x 42 x 42 mm Dimensions Stand:  71.4 x 157.2 x 119 mm Weight: 590 g

Buy Celestron Portable LCD Digital Cosmos Microscope for R2,858.90

Buy Celestron Handheld Digital Microscope - 44302 for R3,030.50

Buy Celestron Handheld Digital Microscope - 44302 for R3,195.50

Buy Celestron Handheld Digital Microscope Pro -44308 for R4,356.00

A T-ring converts a camera's mount to a standard T-thread. All camera adapters, including Celestron and Meade T-adapters and universal camera adapters, will fit this T-thread. This T-Ring is designed to work with Nikon brand 35mm SLR cameras. It's also compatible with new digital SLR cameras.