POOL PUMP TIMER IN SOUTH AFRICA

Switching times = 8 ON, 8 Off, up to 128 programmes in a week Switching load = 20 Amps, 4600 Watts Power supply 230V AC 50Hz Accuracy = 1minute / month Minimum Time Set: 1 minute Backup battery = Rechargeable Ni-MH 1.2V, 100 Hours Operating temperature = -10°C to +40°C   Buy 6pcs and get FREE postage! Additional info: 8 buttons for easy operation Large LCD display with real time display 24 hours and 7 days programming with reset function for switching loads up to 4600 watts Built-in rechargeable Ni-MH battery to maintain the real time clock and programmed times when there is a power failure Ideal for industrial uses, geysers, swimming pools, Security lights, Heaters and Air Conditioners This MTD8 timer can accommodate appliance power ratings of up to 4,6kW. This MTD8 timer fits Din rail DB - for other DBs, purchase an adapter This MTD8 measures approx 84mm high, 43 to 57mm deep, and 34mm wide Should you have a geyser or appliance with power rating greater than 4,6kW, use this MTD8 timer in conjunction with a relay (available from your electrical distributor) to avoid damage to the MTD8 timer Tips: At the top of the MTD8, connect black/neutral to 2 and red/live to 1. Charge it for a few hours (it's easier to program before installation). Also bridge 1 to 4 as per instruction manual. Set the clock to 24hr mode - this will make programming ON/OFF times easier.   The live that feeds you timer on top has to be bridged to no.4 if your timer has the same diagram as above. Your output will be no.5 to your geyser or lights etc. nothing goes into no.3 unless you want something else to switch on when no.5 switches off.