Zvs max input

ZVS Max 20A Input Current DC 12-48V High Frequency Induction Heating Module High Frequency Quench

Note: You must need to pay attention to safety, will produce high pressure / high temperature when using this product. Feature: Suitable heating brass: 24V / 48V (package does not includes) Suitable heating brass: 30 x 30mm (this size can melted about 50g copper) Default input voltage: DC 12V ~ 40V Cooling fan rated voltage: DC 24V Maximum input current: 20A, short working time 25A, long working time ≤15A PCB board size: 181.10 * 88.46 * 1.60mm Input voltage Maximum power Current DC 48V ~ 55V 1000W ≥30A DC 36V 720W ≥30A DC 24V 480W ≥20A DC 12V 240W ≥15A Note: Must ensure that the operating voltage is 11V above, note: this is the working voltage, that is the input voltage of connected to the heating coil or an heated object, not the no-load voltage. Whenever possible, as far as possible use protection power supply. It does not recommend to use adjustable power supply, if you must need to use the adjustable power supply, voltage and current must reach scope of the note! Recommended input voltage range is DC 24V ~ 36V, need to melt steel recommended input voltage is DC 48V ~ 55V. To melt the metal, you must need to use a graphite crucible. This board can melt iron, copper, aluminum: Can melt copper is about 100g, need to split adds, can melt about 50g once, until melted and then added again. Must confirm that the wiring is correct, correct the negative power input not reversed, it must be connected to the load (ie, the heating coil) before power on! Be sure to connect the load before power on, it can not load! Do not use batteries, battery-powered! When using the induction heating, you must need to use copper pipes as coil and water-cooled! Cooling fan must be turned on! The maximum output of the pillars can be installed max. 10mm diameter copper pipe, copper pipe diameter ≤4mm can be soldered to the copper brass clip and then fixed pillars, diameter ≤2mm can be connected to the output terminals. Do not touch any place after power on! Package includes: 1 x 1000W ZVS High Frequency Induction Heating Machine

If you need power supply, please buy it separately: Product ID: 1196806 Note: You must need to pay attention to safety, will produce high pressure / high temperature when using this product. Feature: Suitable heating brass: 24V / 48V (package does not includes) Suitable heating brass: 30 x 30mm (this size can melted about 50g copper)Default input voltage: DC 12V ~ 40VCooling fan rated voltage: DC 24VMaximum input current: 20A, short working time 25A, long working time ≤15APCB board size: 181.10 * 88.46 * 1.60mm Input voltage Maximum power Current DC 48V ~ 55V 1000W ≥30A DC 36V 720W ≥30A DC 24V 480W ≥20A DC 12V 240W ≥15A Note: Must ensure that the operating voltage is 11V above, note: this is the working voltage, that is the input voltage of connected to the heating coil or an heated object, not the no-load voltage. Whenever possible, as far as possible use protection power supply.It does not recommend to use adjustable power supply, if you must need to use the adjustable power supply, voltage and current must reach scope of the note!Recommended input voltage range is DC 24V ~ 36V, need to melt steel recommended input voltage is DC 48V ~ 55V.To melt the metal, you must need to use a graphite crucible.This board can melt iron, copper, aluminum:Can melt copper is about 100g, need to split adds, can melt about 50g once, until melted and then added again.Must confirm that the wiring is correct, correct the negative power input not reversed, it must be connected to the load (ie, the heating coil) before power on! Be sure to connect the load before power on, it can not load!Do not use batteries, battery-powered!When using the induction heating, you must need to use copper pipes as coil and water-cooled! Cooling fan must be turned on!The maximum output of the pillars can be installed max. 10mm diameter copper pipe, copper pipe diameter ≤4mm can be soldered to the copper brass clip and then fixed pillars, diameter ≤2mm can be connected to the output terminals.Do not touch any place after power on! Package includes: 1 x 1000W ZVS High Frequency Induction Heating Machine

Features: Working voltage: DC 24-36VWorking current: more than 15A, less than 30APower tube: Original IRFP260N (50A 200V)Size: 100 x 100 x 85mmSpiral copper pipe size: Inside diameter 40 mm, high 45mmFound with a 36V power supply completely into the new 30 * 30 graphite crucible input current of 25AFound molten aluminum power requirements: 24V 350W - 500W power supply (15A to 20A) melting point: 660 ￢ﾄﾃFound melting copper, gold, silver, power requirements: 36V 700W - 900W power supply (20A to 25A), respectively melting point: 1083 ￢ﾄﾃ, 1065 ￢ﾄﾃ, 962 ￢ﾄﾃ Uses: DIY small parts made of steel hardening, annealing below the melting point of 1100 ￢ﾄﾃ metal smelting, DIY small cooker and so on.Notice: Only direct heating a steel material (the magnet can be adsorbed material) Gold, silver, copper, aluminum can not be directly heated, need to match the graphite crucible melting, whirlpool brass heating will need to use a lot of water circulation cooling, without water circulating cooling is possible, but will burn into a black vortex brass, it will not be much affected. Package includes: 1 x Induction Heating Board with Fan1 x Spiral copper pipe1 x 2m Water pipe

  MT3608 2A MAX DC-DC STEP UP POWER MODULE BOOSTER POWER MODULE   DESCRIPTION: This module features the MT3608 2 Amp step up (boost) converter, which can take input voltages as low as 2V and step up the output to as high as 28V. The MT3608 features automatic shifting to pulse frequency modulation mode at light loads. It includes under-voltage lockout, current limiting, and thermal overload protection.This module has a multi-turn trimpot (potentiometer) that you can use to adjust the output voltage. Since the trimpot has 25 turns of adjustment you can easily adjust the output of the module to exactly the voltage you need.Boost converters are a great way to easily increase a given voltage, but that boost comes at the cost of less output current compared to input current. Since this is a boost converter the output voltage has to be higher than the supplied input voltage.   SPECIFICATIONS:   Maximum output current: 2A Input voltage: 2V ~ 24V Maximum output voltage: > 28V Adjustment 25 turn trimpot Efficiency: > 93% PACKAGE INCLUDE: 1x MT3608 DC-DC Step up converter    

  MT3608 2A MAX DC-DC STEP UP POWER MODULE BOOSTER POWER MODULE   DESCRIPTION: This module features the MT3608 2 Amp step up (boost) converter, which can take input voltages as low as 2V and step up the output to as high as 28V. The MT3608 features automatic shifting to pulse frequency modulation mode at light loads. It includes under-voltage lockout, current limiting, and thermal overload protection.This module has a multi-turn trimpot (potentiometer) that you can use to adjust the output voltage. Since the trimpot has 25 turns of adjustment you can easily adjust the output of the module to exactly the voltage you need.Boost converters are a great way to easily increase a given voltage, but that boost comes at the cost of less output current compared to input current. Since this is a boost converter the output voltage has to be higher than the supplied input voltage.   SPECIFICATIONS:   Maximum output current: 2A Input voltage: 2V ~ 24V Maximum output voltage: > 28V Adjustment 25 turn trimpot Efficiency: > 93% PACKAGE INCLUDE: 1x MT3608 DC-DC Step up converter PLEASE CLICK HERE FOR ALL OUR OTHER LISTINGS       

The MAX® 110 bass combo amp delivers more bass in a space saving package. With 100 Watts of power that includes DDT™ speaker protection and a 10 inch heavy-duty woofer, the Peavey MAX® 110 is ready for plenty of gigs and rehearsals. Another Peavey exclusive is the patented TransTube® circuitry that offers you a gain boost. The EQ section includes a 3 band EQ and a button for Mid-shift. The Max 110 also includes a unique psycho-acoustic low end enhancement that adds low end without taxing the speaker, a testament to Peavey's technology driven philosophy. Rounding out the features are a built-in chromatic tuner and 1/8" jacks for phones output and aux input.•100 watts into 8 ohms •DDT™ speaker protection •Pre-gain control with Transtube® gain boost •3 band EQ with Mid-shift control •10 inch speaker •1/8" aux input •1/8" phones output •Chromatic tuner •Psycho-acoustic low end enhancement •Tuned, ported enclosure •W=" X H=" X D=" •Weight Unpacked: lb( kg) •Weight Packed: lb( kg) •Width Packed: cm) •Height Packed: cm) •Depth Packed: cm)

The MAX 112 bass combo amp delivers more bass in a space saving package. With 200 Watts of power that includes DDT speaker protection and a 12 inch heavy-duty woofer, the Peavey MAX 112 is ready for plenty of gigs and rehearsals. Another Peavey exclusive is the patented TransTube circuitry that offers you a gain boost feature. The EQ section includes a 3 band EQ and buttons for Punch, Mid-shift and Bright. The Max 112 also includes a unique psycho-acoustic low end enhancement that adds low end without taxing the speaker, a testament to Peavey's technology driven philosophy. Rounding out the features are a built-in chromatic tuner, XLR direct output with ground lift and 1/8" jacks for phones output and aux input.200 watts into 8 ohms DDT speaker protection Pre-gain control with Transtube gain boost 3 band EQ with Punch, Mid-shift and Bright controls 12 inch speaker Psycho-acoustic low end enhancement 1/8" aux input 1/8" phones output Chromatic tuner Tuned, ported enclosure Built-in direct output with ground lift W=16.5" X H=" X D=" Weight Unpacked: lb( kg) Weight Packed: lb( kg) Width Packed: cm) Height Packed: cm)

The MAX® 115 bass combo amp delivers more bass in a space saving package. With 300 Watts of power that includes DDT™ speaker protection and a 15 inch heavy-duty woofer, the Peavey MAX® 115 is ready for plenty of gigs and rehearsals. Another Peavey exclusive is the patented TransTube® circuitry that offers you a gain boost feature that automatically turns off the tweeter for a more authentic classic overdrive sound. The EQ section includes a 3 band EQ and buttons for Punch, Mid-shift and Bright. The Max 115 also includes a unique psycho-acoustic low end enhancement that adds low end without taxing the speaker, a testament to Peavey's technology driven philosophy. Rounding out the features are a built-in chromatic tuner, XLR direct output with ground lift and 1/8" jacks for phones output and aux input.•300 watts into 8 ohms •DDT™ speaker protection •Pre-gain control with Transtube® gain boost which automatically turns off the tweeter for more authentic classic tone •3 band EQ with Punch, Mid-shift and Bright controls •15 inch speaker with high end tweeter •Psycho-acoustic low end enhancement •Built-in direct output with ground lift •1/8" aux input •1/8" phones output •Chromatic tuner •Tuned, ported enclosure •Weight Unpacked: lb( kg) •Weight Packed: lb( kg) •Width Packed: cm) •Height Packed: cm) •Depth Packed: cm)

The Peavey MAX® 112 combo bass amp is ready for gigs and practices. If you're tired of lugging around heavy gear to small gigs and rehearsals try plugging in to the MAX® 112. Peavey's exclusive HyperVent™ system is designed to push bass to the front of the cabinet so the full bass output of the speaker is realized. With 35 Watts of power and backed with Peavey's own DDT™ speaker protection circuitry, you're free to play all night long through the heavy-duty 12 inch woofer. Another exclusive is Peavey's TransTube® circuitry that lets you define your sound by choosing between three different amp voicings MAX, Modern or Vintage at the flip of a switch. There's even a 3 band semi parametric EQ on board. We wrapped it up by adding a headphone out and CD / line input for added flexibility. Features: 12 inch speaker DDT™ speaker protection Gain control Modern/Vintage voicing switch with patented TransTube® tube emulation circuitry Low, Mid, and High EQ controls Post-EQ effects loop CD Input Tuned, ported enclosure with exclusive dual HyperVent™ technology Headphone jack 35 watts (rms) into 8 ohms Weight Unpacked: lb( kg) Weight Packed: lb( kg) Width Packed: cm) Height Packed: cm) Depth Packed: cm) 1 year limited guarantee For more info on this product please click here

Overview The MAX® 115 bass combo amp delivers more bass in a space saving package. With 300 Watts of power that includes DDT™ speaker protection and a 15 inch heavy-duty woofer, the Peavey MAX® 115 is ready for plenty of gigs and rehearsals. Another Peavey exclusive is the patented TransTube® circuitry that offers you a gain boost feature that automatically turns off the tweeter for a more authentic classic overdrive sound. The EQ section includes a 3 band EQ and buttons for Punch, Mid-shift and Bright. The Max 115 also includes a unique psycho-acoustic low end enhancement that adds low end without taxing the speaker, a testament to Peavey's technology driven philosophy. Rounding out the features are a built-in chromatic tuner, XLR direct output with ground lift and 1/8" jacks for phones output and aux input. Features 300 watts into 8 ohms DDT™ speaker protection Pre-gain control with Transtube® gain boost which automatically turns off the tweeter for more authentic classic tone 3 band EQ with Punch, Mid-shift and Bright controls 15 inch speaker with high end tweeter Psycho-acoustic low end enhancement Built-in direct output with ground lift 1/8" aux input 1/8" phones output Chromatic tuner Tuned, ported enclosure Weight Unpacked: 50.00 lb(22.68 kg) Weight Packed: 52.01 lb(23.59 kg) Width Packed: 19.1"(48.514 cm) Height Packed: 24.4"(61.976 cm) Depth Packed: 14.5"(36.83 cm)

QTX QR15A Active PA Speaker 15" XLR ABS 500W MAX The QTX QR15A is an active PA speaker that can be used in a variety of setups, and is perfectly suited to medium-sized events. With its active speaker jack and XLR inputs, the speaker can even be used to connect with other active speakers, allowing it to be employed at larger events. The QTX-PA speaker can also be placed on a tripod stand or be stacked in a series, allowing it to be utilised in different PA setups. Its weather-resistant ABS housing protects the speaker from adverse environmental conditions and makes it the perfect choice for outdoor use. Highlights: Active cm) 2-way PA speaker with 250W RMS power (equivalent to 500W max). Durable ABS housing - perfect for outdoors Jack and XLR inputs allow connection with microphones Easily transportable with side handles Base fittings for use with a stand Speaker can be used in a stack Features: Connections: 1 x XLR input, 1 x XLR output, 1 x 6.3mm jack input 2-band equalizer (adjustable bass and treble) Volume control Frequency response: 45Hz to 20kHz SPL sensitivity: 101dB Titanium driver Metal grille T2A safety fuse Power supply: V, Hz Included: 1 x Speaker 1 x Mains adaptor Dimensions: Size: 16.9 x 26.8 x x 68 x 34cm) Weight: 15.8 kg

Overview The MAX® 115 bass combo amp delivers more bass in a space saving package. With 300 Watts of power that includes DDT™ speaker protection and a 15 inch heavy-duty woofer, the Peavey MAX® 115 is ready for plenty of gigs and rehearsals. Another Peavey exclusive is the patented TransTube® circuitry that offers you a gain boost feature that automatically turns off the tweeter for a more authentic classic overdrive sound. The EQ section includes a 3 band EQ and buttons for Punch, Mid-shift and Bright. The Max 115 also includes a unique psycho-acoustic low end enhancement that adds low end without taxing the speaker, a testament to Peavey's technology driven philosophy. Rounding out the features are a built-in chromatic tuner, XLR direct output with ground lift and 1/8" jacks for phones output and aux input. Features 300 watts into 8 ohms DDT™ speaker protection Pre-gain control with Transtube® gain boost which automatically turns off the tweeter for more authentic classic tone 3 band EQ with Punch, Mid-shift and Bright controls 15 inch speaker with high end tweeter Psycho-acoustic low end enhancement Built-in direct output with ground lift 1/8" aux input 1/8" phones output Chromatic tuner Tuned, ported enclosure Weight Unpacked: 50.00 lb(22.68 kg) Weight Packed: 52.01 lb(23.59 kg) Width Packed: 19.1"(48.514 cm) Height Packed: 24.4"(61.976 cm) Depth Packed: 14.5"(36.83 cm) Please confirm stock availability before purchasing We are an authorized dealer of the best sound, dj equipment, studio equipment and lighting Free delivery anywhere in the country on orders over a R1000 Delivery 24-48 hours to all major cities 48-72 hours to outlying areas Warranty Type: Authorized Dealer 12 Months Warranty. All goods are subject to supplier discretion Replacement Guarantee: 30 Days: All goods are subject to supplier discretion Our Shop – Opening Soon Office F2 The Conservatory at Lakefield 106 Lakefield Avenue Lakefield Square Benoni Contact us at 110 - show phone - Tian - 718 - show phone - /Whatsapp Carlo - 844 - show phone - /Whatsapp Trading Hours: Monday - Friday 7:30am - 16:30pm Saturday 7:30am - 13:00pm If you can't find what you are looking for give us a call and we will gladly assist you

Overview The MAX® 115 bass combo amp delivers more bass in a space saving package. With 300 Watts of power that includes DDT™ speaker protection and a 15 inch heavy-duty woofer, the Peavey MAX® 115 is ready for plenty of gigs and rehearsals. Another Peavey exclusive is the patented TransTube® circuitry that offers you a gain boost feature that automatically turns off the tweeter for a more authentic classic overdrive sound. The EQ section includes a 3 band EQ and buttons for Punch, Mid-shift and Bright. The Max 115 also includes a unique psycho-acoustic low end enhancement that adds low end without taxing the speaker, a testament to Peavey's technology driven philosophy. Rounding out the features are a built-in chromatic tuner, XLR direct output with ground lift and 1/8" jacks for phones output and aux input. Features 300 watts into 8 ohms DDT™ speaker protection Pre-gain control with Transtube® gain boost which automatically turns off the tweeter for more authentic classic tone 3 band EQ with Punch, Mid-shift and Bright controls 15 inch speaker with high end tweeter Psycho-acoustic low end enhancement Built-in direct output with ground lift 1/8" aux input 1/8" phones output Chromatic tuner Tuned, ported enclosure Weight Unpacked: 50.00 lb(22.68 kg) Weight Packed: 52.01 lb(23.59 kg) Width Packed: 19.1"(48.514 cm) Height Packed: 24.4"(61.976 cm) Depth Packed: 14.5"(36.83 cm) Please confirm stock availability before purchasing We are an authorized dealer of the best sound, dj equipment, studio equipment and lighting Free delivery anywhere in the country on orders over a R1000 Delivery 24-48 hours to all major cities 48-72 hours to outlying areas Warranty Type: Authorized Dealer 12 Months Warranty. All goods are subject to supplier discretion Replacement Guarantee: 30 Days: All goods are subject to supplier discretion Our Shop Shop F2 Second Level The Conservatory at Lakefield 106 Lakefield Avenue Lakefield Square Benoni Contact us at 110 - show phone - Tian - 718 - show phone - /Whatsapp Carlo - 844 - show phone - /Whatsapp Trading Hours: Monday - Friday 9:00am - 17:00pm Saturday 9:00am - 15:00pm If you can't find what you are looking for give us a call and we will gladly assist you

The MAX® 112 bass combo amp delivers more bass in a space saving package. With 200 Watts of power that includes DDT™ speaker protection and a 12 inch heavy-duty woofer, the Peavey MAX® 112 is ready for plenty of gigs and rehearsals. Another Peavey exclusive is the patented TransTube® circuitry that offers you a gain boost feature. The EQ section includes a 3 band EQ and buttons for Punch, Mid-shift and Bright. The Max 112 also includes a unique psycho-acoustic low end enhancement that adds low end without taxing the speaker, a testament to Peavey's technology driven philosophy. Rounding out the features are a built-in chromatic tuner, XLR direct output with ground lift and 1/8" jacks for phones output and aux input. Features 200 watts into 8 ohms DDT™ speaker protection Pre-gain control with Transtube® gain boost 3 band EQ with Punch, Mid-shift and Bright controls 12 inch speaker Psycho-acoustic low end enhancement 1/8" aux input 1/8" phones output Chromatic tuner Tuned, ported enclosure Built-in direct output with ground lift W=16.5" X H=20.25" X D=16.375" Weight Unpacked: 40.00 lb(18.143 kg) Weight Packed: 42.00 lb(19.05 kg) Width Packed: 17.32"(43.9928 cm) Height Packed: 21.45"(54.483 cm) Depth Packed: 16.73"(42.4942 cm) Please confirm stock availability before purchasing We are an authorized dealer of the best sound, dj equipment, studio equipment and lighting Free delivery anywhere in the country on orders over a R1000 Delivery 24-48 hours to all major cities 48-72 hours to outlying areas Warranty Type: Authorized Dealer 12 Months Warranty. All goods are subject to supplier discretion Replacement Guarantee: 30 Days: All goods are subject to supplier discretion Our Shop – Opening Soon Office F2 The Conservatory at Lakefield 106 Lakefield Avenue Lakefield Square Benoni Contact us at 110 - show phone - Tian - 718 - show phone - /Whatsapp Carlo - 844 - show phone - /Whatsapp Trading Hours: Monday - Friday 7:30am - 16:30pm Saturday 7:30am - 13:00pm If you can't find what you are looking for give us a call and we will gladly assist you