Wine display rack complete

  * Wine display rack complete with sealed bottles * Bid from R1 for all 36 items * Display actual size is (H=150cm x W=60cm x D=40cm) * Collection by the buyer only, no packaging will be done for courier collection * * We are based in Johannesburg South, Close to The Glen Shopping center *    

16 Bottle Wine Rack for sale - Floor to ceiling type 2.3m Tall - Decorative stacked log inlay, covered in glass on the display side - Mountable on a plastered (single brick) wall Buyer to collect at own cost. No chancers please! Serious buyers ONLY!

8 seater dining room table, with 4 chairs, two benches and wine rack. Complete with sideboard. The side board has stained glass. Two additional chairs needs to be clamped. But fixable. Nice table for a family. Or even a patio. Table Measures 1.5m x 1.5m Urgent Sale 799 - show phone - 0

DES CRIPTION: SIMPLY MAGNIFICENT WOODEN WINE RACK. THIS STUNNING PIECE IS RECTANGULAR IN SHAPE AND ALMOST RESEMBLES A BOX. IT HAS TWIN HANDLES. IT HAS 18 CUBICLES. ABSOLUTELY STUNNING DISPLAY/ STORAGE PIECE ! CONDITION: IT HAS MINOR SIGNS OF WEAR AND TEAR WHICH ADDS TO ITS CHARACTER. OVERALL IT IS IN GOOD CONDITION. DIMENSIONS: APPROXIMATELY LENGTH - 620 MM WIDTH    - 300 MM HEIGHT  - 350 MM     PLEASE VIEW THE PICTURES VERY CAREFULLY FOR MORE DETAIL AND THE GENERAL CONDITION. ITEMS ARE SECOND HAND AND THEREFORE HAVE WEAR AND TARE. THEY ARE NOT NEW UNLESS SPECIFIED. WHAT YOU SEE IS WHAT YOU GET!   SOMETIMES IT IS NOT MENTIONED BUT IS VISIBLE IN THE PICTURE. PROPS ARE NOT INCLUDED UNLESS OTHERWISE STATED. PLEASE VIEW OUR SHIPPING OPTIONS COLLECTION IS   IN EDENVALE AT NO CHARGE! PLEASE ADVISE US TIMEOUSLY THAT YOU WILL BE COLLECTING SO WE ARE ABLE TO ASSIST YOU EFFICIENTLY.   NO FREE SHIPPING.   WE ALSO OFFER A DELIVERY SERVICES. PRICE ON REQUEST   PAYMENT TERMS ARE THREE DAYS FROM CLOSE OF AUCTION   TO VIEW OUR OTHER WONDERFUL ITEMS ON AUCTION PLEASE GO TO: //www.bidor buy.co.za/seller/1800759/lots_for_sale    PLEASE NOTE WE NO LONGER CLOSE AUCTIONS EARLY, IT UPSETS PEOPLE THAT ARE FOLLOWING THAT ITEM WHETHER IT IS ON THERE WATCHLIST OR NOT.                          

Holds 12 bottles of wine and 10 glasses (5 slots at the bottom). This hand made wine rack takes 6 hours to make. Made with great attention to detail from pallet wood. Painted with high qulaity Chalk Paint (2 layers) then sealed with a satin sealer. Top quality. Will "complete" your home decor perfectly. A perfect gift. I take orders. Turn around time of 1 to 2 weeks. Payment on delivery. Greater Cape Town.

When it comes to proudly South African furniture and home accessory design, Emerging Creatives is all about innovative ideas for maximising living and counter space. This fun and functional floating rope wine bottle holder is a great way to display special wines and makes a lovely gift. Ridged rope floating wine bottle holder Holds one bottle of wine Sturdy design Makes a great gift

solid oak wine rack - holds approximately 84 bottles. can be used either in a home or for display purposes. measurements approx: 1m tall by...173669156

Complete bar inclusive of canopy over the bar unit, with false ceiling, lights, electrical connections, mirrors and glass shelves with separate wine rack from floor to ceiling. All in brown kiaat wood. Storage cabinets under shelving. 5 bar chairs and 1 bar stool. Ideal for home or office use in a 4m x 3m room or larger. Space for 3 bar fridges under counters. Has not been used much and is in excellent condition! Price negotiable

Lovely Oak Drinks / Display Cabinet. Hidden wine rack at the bottom that can house 21 bottles of wine. Nice condition. 82cm wide x 46cm deep x 2m high. Has a pull out drinks tray. Also does have a backboard. I am going to put it back on

TruCUT Performance Range 1800x1000mm Cabinet with Conveyor Table with Double Laser Head Laser Cutting and Engraving Machine with 100W CO2 Laser Tubes Complete Package (CNC Laser Cutter) Code: LC2-1810/D100, CNC Laser Cutter, 0822222359 CNC Laser Cutter Product Price: R 242 889.00 Sales Price exclude VAT and Shipping Cost, quoted at 2018-10-8 kao8kp3c 0822222359 http://SalePrice.co.za/LC2-1810/D100# Easy to Use Control Panel with Direct Internal Saved File Select Button Two 100Watt CO2 Laser Systems with Cooling Unit Included Achieve ± 0.001 mm Resolution Less Than 0.05 mm Repeat Positioning Accuracy Support Direct USB Connection from PC or Use Flush Drive Latest TruCUT DSP for Multitasking (Cut/Engrave etc in One Job) with 128M Large Memory Double Power Supplies and Double Electromagnetic Interference (EMI), Radio-Frequency Interference (RFI) Filters Include TruCUT Software with Multi-Layer Process, Simulation, Time Estimation and Many Other Functions, Learn More https://am.co.za/laser/trucut High Precision Rack and Pinion Gear Transmission System High Speed Servo Motors Driving System Double the Efficiency by Utilize Two Set of Laser System Simultaneously Air Pump, Extraction Fan and Exhaust Hoses Included With RJ45 Network Port for Cutting Job Transfer through Network With Double Laser Head, each for 900x1000mm Working Area Cutting Table Weight Static Load Up To 50 kg/m2 Working Area (Cutting/Engraving Area) Size 1800x1000mm Up to 36 meter/min (600 mm/s) Cutting Speed Up to 27 meter/min (450 mm/s) Engraving Speed With Wire Mesh Belt Conveyors for Continues Material Feeding and Cutting 36 meter/min (600 mm/s) Rapid Positioning Linear Speed Professional model driven by Servo Motors and Rack and Pinion Gear for High Precision and Performance With Rolled Material (e.g.Fabric) Hanging Rack for Automatic Feeding Include Laser Tube Cooling System Warning Light Indicator and Laser Power Cutoff Use Household 220V Electricity, Include Ellies Surges and Lightning Safe Plug Program Controlled Compressed Air, Blow When Needed Minimal Can Engrave Readable 1mm Height English Letter Double Focus Lens Position (63.5mm Default, 101.6mm Optional) Laser Lens Holder 0822222359 http://SalePrice.co.za/LC2-1810/D100# More About CNC Laser Cutter:Flatpacked Butterfly Design Made by 3mm Supawood Cut on TruCUT-Pro Flatbed CO2 Laser Cutter http://makerslab.tv/video/287786568# Advanced Machinery Attended Hobby-X Expo at the Coca-Cola Dome, Johannesburg http://univision.co.za/video/136284912# SanDisk Display Stand Made by Red ABS Cut on TruCUT Flatbed CO2 Laser Cutter by Harrogate Plastic http://makerslab.tv/video/287786204# Components included in this CNC Laser Cutter package:(LC-POWER/100) 100W CO2 Laser Power Supply Unit Suggest for 100W CO2 Glass Laser Tube (Can Work with 120W/130W Laser Tube too) with Adjustable Current X 2 (LC-CABLE/HV) High Voltage Wire Connector and High Voltage Cable about 1.5 Metre Length for CO2 Laser Power Supply, Suitable for Desktop/Cabinet Laser X 2 (LC-1810) AM.CO.ZA TruCUT Standard Range 1800x1000mm Cabinet with Conveyor Table Laser Cutting and Engraving Machine Barebone Unit (LC-R/HEAD) Add Structure for Additional Laser Tube, Laser Reflection Path and Install Second Laser Head (LC-TUBE/100) TruCUT Standard Series Sealed Rated 100W with Burst 110W+ CO2 Glass Laser Tube X 2 (A-CHILLER/800) Generic AM-5000 800W Refrigeration Water Chiller with Air Compressor X 2 (T-LASER/ALIGNMENT) Laser Alignment Learning and Practice Course at Suitable Training Facility or at Client Place with Suitable Equipment (X-UTILITY/CD) All-in-One Utility Disk with Softwares/Drives for CNC Machineries on a DVD ( Available for Free Download ) (T-BASIC/LC) Basic TruCUT Laser Machine Training Course and TruCUT Software Usage (A-CHILLER/CABLE) 3 PIN Male Plug Water Cooling/Chilling Unit Signal Data Cable, about 3 Meters (NO-STOP/1) AM.CO.ZA NO-STOP High Speed Lubrication Oil 1L Bottle for Mechanical Parts like Linear Guide Rails and Runner Blocks (LC-PRO/CAB) Use Servo Motors and Ball Screws Precision Driving for Desktop/Cabinet Laser (AG-TAPE/HV) 3M 10 Kilovolt High-Voltage Insulation Tape, Ethylene Propylene Rubber (EPR) with Liner, Waterproof Insulation Tape (NO-RUST/15) AM.CO.ZA NO-RUST Additive Liquid Solution for CNC Machinery Cooling and Protection 1.5kg Bottle 0822222359 http://SalePrice.co.za/LC2-1810/D100# More CNC Laser Cutter Components Sold By Us:(L-LENS-ZNSE/20/635) Φ20mm ZnSe (Zinc Selenide) Lens FL 63.5mm with Two Sides Anti-Reflection ( AR/AR ) Coating for CO2 Laser Beam (L-MIRROR/K9/20) Φ20mm K9 Crystal Glass Gold-Plated Laser Reflecting Mirror for ≤60W CO2 Laser Beam (L-LENS-ZNSE/20/1016) Φ20mm ZnSe (Zinc Selenide) Lens FL 101.6mm with Two Sides Anti-Reflection ( AR/AR ) Coating for CO2 Laser Beam

TruCUT Performance Range 1600x1000mm Cabinet with Conveyor Table Laser Cutting and Engraving Machine with 80W CO2 Laser Tube Complete Package (CNC Laser Cutter) Code: LC2-1610/80, CNC Laser Cutter, 0822222359 CNC Laser Cutter Price: R 193 189.00 Sales Price exl. VAT & Deliver, quoted at 2018-10-8 kao8kp3c 0822222359 http://SalePrice.co.za/LC2-1610/80# Include TruCUT Software with Multi-Layer Process, Simulation, Time Estimation and Many Other Functions, Learn More https://am.co.za/laser/trucut Include Laser Tube Cooling System Warning Light Indicator and Laser Power Cutoff With RJ45 Network Port for Cutting Job Transfer through Network Double Focus Lens Position (63.5mm Default, 101.6mm Optional) Laser Lens Holder Cutting Table Weight Static Load Up To 50 kg/m2 Minimal Can Engrave Readable 1mm Height English Letter Double Power Supplies and Double Electromagnetic Interference (EMI), Radio-Frequency Interference (RFI) Filters With Wire Mesh Belt Conveyors for Continues Material Feeding and Cutting 80Watt CO2 Laser System with Cooling Unit Included Working Area (Cutting/Engraving Area) Size 1600x1000mm High Precision Rack and Pinion Gear Transmission System High Speed Servo Motors Driving System Program Controlled Compressed Air, Blow When Needed Support Direct USB Connection from PC or Use Flush Drive Less Than 0.05 mm Repeat Positioning Accuracy Use Household 220V Electricity, Include Ellies Surges and Lightning Safe Plug Up to 36 meter/min (600 mm/s) Cutting Speed With Rolled Material (e.g.Fabric) Hanging Rack for Automatic Feeding Air Pump, Extraction Fan and Exhaust Hoses Included Easy to Use Control Panel with Direct Internal Saved File Select Button 36 meter/min (600 mm/s) Rapid Positioning Linear Speed Up to 27 meter/min (450 mm/s) Engraving Speed Latest TruCUT DSP for Multitasking (Cut/Engrave etc in One Job) with 128M Large Memory Professional model driven by Servo Motors and Rack and Pinion Gear for High Precision and Performance Achieve ± 0.001 mm Resolution 0822222359 http://SalePrice.co.za/LC2-1610/80# More About CNC Laser Cutter:CO2 CNC Laser Cutting and Engraving Machine Cuts 6mm Supawood Video https://updating.co.za/2014/08/18/laser-6mm-supawood/# Intel Laptop Display Made by 10mm PLEXIGLAS Acrylic Cut on TruCUT-Pro Flatbed CO2 Laser Cutter http://makerslab.tv/video/287786377# Advanced Machinery Attended Hobby-X Expo at the Coca-Cola Dome, Johannesburg http://univision.co.za/video/136284912# Components included in this CNC Laser Cutter purchase:(T-LASER/ALIGNMENT) Laser Alignment Learning and Practice Course at Suitable Training Facility or at Client Place with Suitable Equipment (NO-STOP/1) AM.CO.ZA NO-STOP High Speed Lubrication Oil 1L Bottle for Mechanical Parts like Linear Guide Rails and Runner Blocks (LC-PRO/CAB) Use Servo Motors and Ball Screws Precision Driving for Desktop/Cabinet Laser (AG-TAPE/HV) 3M 10 Kilovolt High-Voltage Insulation Tape, Ethylene Propylene Rubber (EPR) with Liner, Waterproof Insulation Tape (NO-RUST/15) AM.CO.ZA NO-RUST Additive Liquid Solution for CNC Machinery Cooling and Protection 1.5kg Bottle (LC-POWER/90) 90W CO2 Laser Power Supply Unit Suggest for 80W/90W CO2 Glass Laser Tube (Can Work with 100W Laser Tube too) with Adjustable Current (LC-CABLE/HV) High Voltage Wire Connector and High Voltage Cable about 1.5 Metre Length for CO2 Laser Power Supply, Suitable for Desktop/Cabinet Laser (X-UTILITY/CD) All-in-One Utility Disk with Softwares/Drives for CNC Machineries on a DVD ( Available for Free Download ) (A-CHILLER/CABLE) 3 PIN Male Plug Water Cooling/Chilling Unit Signal Data Cable, about 3 Meters (T-BASIC/LC) Basic TruCUT Laser Machine Training Course and TruCUT Software Usage (A-COOLER) Generic AM-3000 Thermolysis Water-Cooled Chiller (LC-1610) AM.CO.ZA TruCUT Standard Range 1600x1000mm Cabinet with Conveyor Table Laser Cutting and Engraving Machine Barebone Unit (LC-TUBE/80) TruCUT Standard Series Sealed 80W CO2 Glass Laser Tube 0822222359 http://SalePrice.co.za/LC2-1610/80# More CNC Laser Cutter Spare Parts Sold By Us:(LC-TUBE/P130) TruCUT Premium Series Sealed Rated 130W with Burst 160W+ CO2 Glass Laser Tube with Galvanized Catalyst (L-MIRROR/MO/20) Φ20mm Molybdenum Plated Laser Reflecting Mirror for CO2 Laser Beam (LC-TUBE/30) TruCUT Standard Series Sealed 30W CO2 Glass Laser Tube

Designed to be beautiful enough to display on your worktop or shelf when not in use, this 3-in-1 Cordless Hand Blender is a must-have from Cuisinart's Style Collection. Keep it in its handy docking station so it's always fully charged and at your fingertips when you need to use it. It comes with three really useful, easy-to-store accessories for blending and mixing, whisking and mashing. Powered by lithium-ion, it will give you professional performance anywhere in your kitchen, whether it's for blending soups over the hob or mashing your potatoes on the island. 3-in-1 cordless hand blender with powerful motor A full 2.5 hour charge will give you around 20 minutes of continuous cordless use Features 5 speed settings for complete control over the consistency of your recipe The ultra-sharp blade on the blending attachment makes light work of everything from puréeing smoothies to mixing dips and dressings Features an extra-long stainless steel arm that can be used in hot recipes — perfect for puréeing hot soups and baby food Robust stainless steel whisk attachment is ideal for whipping up everything from ultra-light meringues to pancake batters and frothed milk Specialised mashing attachment will effortlessly transform your potatoes and vegetables for smooth results — mash directly into your pan without the risk of damaging any non-stick surfaces Fully rechargeable with a charging stand and a charge level indicator Lithium-ion battery for powerful, consistent performance even when the battery is low Use the safety lock in conjunction with the on-off switch to activate the attachments for total peace of mind Attachments are dishwasher safe for easy cleaning Attachments included: Blending attachment Whisk attachment Mashing attachment Cuisinart knows that throwing a dinner party, cooking for a special occasion or even having friends over for an impromptu get-together can be a daunting task. But when you have the right tools at hand, it’s easy to rustle up something delicious, which is why they’ve developed a range of high quality appliances that can take the strain in the kitchen and give you the confidence to try new things. Specifications Dimensions: Body: 47.9cm H x 5.2cm L x 5.2cm D Blending shaft: 22.5cm L x 7.3cm W Whisk attachment: 22cm L x 6cm W Potato masher: 17cm L x 9.7cm W Weight: 916g Power: 250W 5 speed settings Charging time: 2h30m Run time: 20min Body material: Plastic Mashing attachment material: Plastic Care Instructions Battery life & indicator lights: The batteries in the hand blender have not been fully charged Before using, the batteries must be charged until the blue battery indicator light illuminates With a full charge, your hand blender will run for approximately 20 minutes, depending on use Your hand blender will be fully charged in approximately 2-2.5 hours Blue — between 100% and 75% of battery power Purple — between 75% and 25% of battery power Red — less than 25% and will need to charge soon Note: Do not leave your hand blender uncharged for an extended period of time, as it will affect the life of the rechargeable battery. If the battery has completely run down on the unit, it will not operate while it is plugged in and charging Always clean the appliance thoroughly after use Main unit: Ensure any attachment has been removed from the unit Clean the main unit and charging stand with a sponge or damp cloth only Do not use abrasive cleaners that could scratch the surface Blending shaft: Release the attachment from the main unit Wash by hand using warm, soapy water or place on the top rack of the dishwasher Warning: Be mindful of the fixed razor-sharp edges of the blades, they are very sharp and should be handled carefully to avoid injury Whisk attachment: Release the fully assembled whisk attachment from the main unit Detach the metal whisk from the gearbox by pulling the pieces apart To clean the gearbox, simply wipe with a damp cloth To clean the metal whisk, wash with warm, soapy water or place on the top rack of the dishwasher Do not submerge the gearbox in water or any other liquids Potato masher attachment: Release the full attachment from the main unit To simplify cleaning, rinse the attachment immediately after use so food does not dry on it With the gearbox still connected to the attachment, pull the inner blade out slightly from the unit while turning clockwise to release Wash the attachment with warm, soapy water and a soft bristle brush if necessary, or place on the top rack of dishwasher Do not use any sharp, metal objects Dry thoroughly and reassemble when ready to use Do not submerge the gearbox in water or any other liquids Warranty Info This product comes with a 5 year warranty

Designed to be beautiful enough to display on your worktop or shelf when not in use, this 3-in-1 Cordless Hand Blender is a must-have from Cuisinart's Style Collection. Keep it in its handy docking station so it's always fully charged and at your fingertips when you need to use it. It comes with three really useful, easy-to-store accessories for blending and mixing, whisking and mashing. Powered by lithium-ion, it will give you professional performance anywhere in your kitchen, whether it's for blending soups over the hob or mashing your potatoes on the island. 3-in-1 cordless hand blender with powerful motor A full 2.5 hour charge will give you around 20 minutes of continuous cordless use Features 5 speed settings for complete control over the consistency of your recipe The ultra-sharp blade on the blending attachment makes light work of everything from puréeing smoothies to mixing dips and dressings Features an extra-long stainless steel arm that can be used in hot recipes — perfect for puréeing hot soups and baby food Robust stainless steel whisk attachment is ideal for whipping up everything from ultra-light meringues to pancake batters and frothed milk Specialised mashing attachment will effortlessly transform your potatoes and vegetables for smooth results — mash directly into your pan without the risk of damaging any non-stick surfaces Fully rechargeable with a charging stand and a charge level indicator Lithium-ion battery for powerful, consistent performance even when the battery is low Use the safety lock in conjunction with the on-off switch to activate the attachments for total peace of mind Attachments are dishwasher safe for easy cleaning Attachments included: Blending attachment Whisk attachment Mashing attachment Beautiful, functional kitchen appliances since 1973 Cuisinart knows that throwing a dinner party, cooking for a special occasion or even having friends over for an impromptu get-together can be a daunting task. But when you have the right tools at hand, it’s easy to rustle up something delicious, which is why they’ve developed a range of high quality appliances that can take the strain in the kitchen and give you the confidence to try new things. Specifications Dimensions: Body: 47.9cm H x 5.2cm L x 5.2cm D Blending shaft: 22.5cm L x 7.3cm W Whisk attachment: 22cm L x 6cm W Potato masher: 17cm L x 9.7cm W Weight: 916g Power: 250W 5 speed settings Charging time: 2h30m Run time: 20min Body material: Plastic Mashing attachment material: Plastic Care Instructions Battery life & indicator lights: The batteries in the hand blender have not been fully charged Before using, the batteries must be charged until the blue battery indicator light illuminates With a full charge, your hand blender will run for approximately 20 minutes, depending on use Your hand blender will be fully charged in approximately 2-2.5 hours Blue — between 100% and 75% of battery power Purple — between 75% and 25% of battery power Red — less than 25% and will need to charge soon Note: Do not leave your hand blender uncharged for an extended period of time, as it will affect the life of the rechargeable battery. If the battery has completely run down on the unit, it will not operate while it is plugged in and charging Always clean the appliance thoroughly after use Main unit: Ensure any attachment has been removed from the unit Clean the main unit and charging stand with a sponge or damp cloth only Do not use abrasive cleaners that could scratch the surface Blending shaft: Release the attachment from the main unit Wash by hand using warm, soapy water or place on the top rack of the dishwasher Warning: Be mindful of the fixed razor-sharp edges of the blades, they are very sharp and should be handled carefully to avoid injury Whisk attachment: Release the fully assembled whisk attachment from the main unit Detach the metal whisk from the gearbox by pulling the pieces apart To clean the gearbox, simply wipe with a damp cloth To clean the metal whisk, wash with warm, soapy water or place on the top rack of the dishwasher Do not submerge the gearbox in water or any other liquids Potato masher attachment: Release the full attachment from the main unit To simplify cleaning, rinse the attachment immediately after use so food does not dry on it With the gearbox still connected to the attachment, pull the inner blade out slightly from the unit while turning clockwise to release Wash the attachment with warm, soapy water and a soft bristle brush if necessary, or place on the top rack of dishwasher Do not use any sharp, metal objects Dry thoroughly and reassemble when ready to use Do not submerge the gearbox in water or any other liquids Warranty Info This product comes with a 5 year warranty

Designed to be beautiful enough to display on your worktop or shelf when not in use, this 3-in-1 Cordless Hand Blender is a must-have from Cuisinart's Style Collection. Keep it in its handy docking station so it's always fully charged and at your fingertips when you need to use it. It comes with three really useful, easy-to-store accessories for blending and mixing, whisking and mashing. Powered by lithium-ion, it will give you professional performance anywhere in your kitchen, whether it's for blending soups over the hob or mashing your potatoes on the island. 3-in-1 cordless hand blender with powerful motor A full 2.5 hour charge will give you around 20 minutes of continuous cordless use Features 5 speed settings for complete control over the consistency of your recipe The ultra-sharp blade on the blending attachment makes light work of everything from puréeing smoothies to mixing dips and dressings Features an extra-long stainless steel arm that can be used in hot recipes — perfect for puréeing hot soups and baby food Robust stainless steel whisk attachment is ideal for whipping up everything from ultra-light meringues to pancake batters and frothed milk Specialised mashing attachment will effortlessly transform your potatoes and vegetables for smooth results — mash directly into your pan without the risk of damaging any non-stick surfaces Fully rechargeable with a charging stand and a charge level indicator Lithium-ion battery for powerful, consistent performance even when the battery is low Use the safety lock in conjunction with the on-off switch to activate the attachments for total peace of mind Attachments are dishwasher safe for easy cleaning Attachments included: Blending attachment Whisk attachment Mashing attachment Beautiful, functional kitchen appliances since 1973 Cuisinart knows that throwing a dinner party, cooking for a special occasion or even having friends over for an impromptu get-together can be a daunting task. But when you have the right tools at hand, it’s easy to rustle up something delicious, which is why they’ve developed a range of high quality appliances that can take the strain in the kitchen and give you the confidence to try new things. Specifications Dimensions: Body: 47.9cm H x 5.2cm L x 5.2cm D Blending shaft: 22.5cm L x 7.3cm W Whisk attachment: 22cm L x 6cm W Potato masher: 17cm L x 9.7cm W Weight: 916g 5 speed settings Charging time: 2h30m Run time: 20min Body material: Plastic Mashing attachment material: Plastic Care Instructions Battery life & indicator lights: The batteries in the hand blender have not been fully charged Before using, the batteries must be charged until the blue battery indicator light illuminates With a full charge, your hand blender will run for approximately 20 minutes, depending on use Your hand blender will be fully charged in approximately 2-2.5 hours Blue — between 100% and 75% of battery power Purple — between 75% and 25% of battery power Red — less than 25% and will need to charge soon Note: Do not leave your hand blender uncharged for an extended period of time, as it will affect the life of the rechargeable battery. If the battery has completely run down on the unit, it will not operate while it is plugged in and charging Always clean the appliance thoroughly after use Main unit: Ensure any attachment has been removed from the unit Clean the main unit and charging stand with a sponge or damp cloth only Do not use abrasive cleaners that could scratch the surface Blending shaft: Release the attachment from the main unit Wash by hand using warm, soapy water or place on the top rack of the dishwasher Warning: Be mindful of the fixed razor-sharp edges of the blades, they are very sharp and should be handled carefully to avoid injury Whisk attachment: Release the fully assembled whisk attachment from the main unit Detach the metal whisk from the gearbox by pulling the pieces apart To clean the gearbox, simply wipe with a damp cloth To clean the metal whisk, wash with warm, soapy water or place on the top rack of the dishwasher Do not submerge the gearbox in water or any other liquids Potato masher attachment: Release the full attachment from the main unit To simplify cleaning, rinse the attachment immediately after use so food does not dry on it With the gearbox still connected to the attachment, pull the inner blade out slightly from the unit while turning clockwise to release Wash the attachment with warm, soapy water and a soft bristle brush if necessary, or place on the top rack of dishwasher Do not use any sharp, metal objects Dry thoroughly and reassemble when ready to use Do not submerge the gearbox in water or any other liquids Warranty Info This product comes with a 5 year warranty

Designed to be beautiful enough to display on your worktop or shelf when not in use, this 3-in-1 Cordless Hand Blender is a must-have from Cuisinart's Style Collection. Keep it in its handy docking station so it's always fully charged and at your fingertips when you need to use it. It comes with three really useful, easy-to-store accessories for blending and mixing, whisking and mashing. Powered by lithium-ion, it will give you professional performance anywhere in your kitchen, whether it's for blending soups over the hob or mashing your potatoes on the island. 3-in-1 cordless hand blender with powerful motor A full 2.5 hour charge will give you around 20 minutes of continuous cordless use Features 5 speed settings for complete control over the consistency of your recipe The ultra-sharp blade on the blending attachment makes light work of everything from puréeing smoothies to mixing dips and dressings Features an extra-long stainless steel arm that can be used in hot recipes — perfect for puréeing hot soups and baby food Robust stainless steel whisk attachment is ideal for whipping up everything from ultra-light meringues to pancake batters and frothed milk Specialised mashing attachment will effortlessly transform your potatoes and vegetables for smooth results — mash directly into your pan without the risk of damaging any non-stick surfaces Fully rechargeable with a charging stand and a charge level indicator Lithium-ion battery for powerful, consistent performance even when the battery is low Use the safety lock in conjunction with the on-off switch to activate the attachments for total peace of mind Attachments are dishwasher safe for easy cleaning Attachments included: Blending attachment Whisk attachment Mashing attachment Beautiful, functional kitchen appliances since 1973 Cuisinart knows that throwing a dinner party, cooking for a special occasion or even having friends over for an impromptu get-together can be a daunting task. But when you have the right tools at hand, it’s easy to rustle up something delicious, which is why they’ve developed a range of high quality appliances that can take the strain in the kitchen and give you the confidence to try new things. Specifications Dimensions: Body: 47.9cm H x 5.2cm L x 5.2cm D Blending shaft: 22.5cm L x 7.3cm W Whisk attachment: 22cm L x 6cm W Potato masher: 17cm L x 9.7cm W Weight: 916g 5 speed settings Charging time: 2h30m Run time: 20min Body material: Plastic Mashing attachment material: Plastic Features Power type: Cordless Care Instructions Battery life & indicator lights: The batteries in the hand blender have not been fully charged Before using, the batteries must be charged until the blue battery indicator light illuminates With a full charge, your hand blender will run for approximately 20 minutes, depending on use Your hand blender will be fully charged in approximately 2-2.5 hours Blue — between 100% and 75% of battery power Purple — between 75% and 25% of battery power Red — less than 25% and will need to charge soon Note: Do not leave your hand blender uncharged for an extended period of time, as it will affect the life of the rechargeable battery. If the battery has completely run down on the unit, it will not operate while it is plugged in and charging Always clean the appliance thoroughly after use Main unit: Ensure any attachment has been removed from the unit Clean the main unit and charging stand with a sponge or damp cloth only Do not use abrasive cleaners that could scratch the surface Blending shaft: Release the attachment from the main unit Wash by hand using warm, soapy water or place on the top rack of the dishwasher Warning: Be mindful of the fixed razor-sharp edges of the blades, they are very sharp and should be handled carefully to avoid injury Whisk attachment: Release the fully assembled whisk attachment from the main unit Detach the metal whisk from the gearbox by pulling the pieces apart To clean the gearbox, simply wipe with a damp cloth To clean the metal whisk, wash with warm, soapy water or place on the top rack of the dishwasher Do not submerge the gearbox in water or any other liquids Potato masher attachment: Release the full attachment from the main unit To simplify cleaning, rinse the attachment immediately after use so food does not dry on it With the gearbox still connected to the attachment, pull the inner blade out slightly from the unit while turning clockwise to release Wash the attachment with warm, soapy water and a soft bristle brush if necessary, or place on the top rack of dishwasher Do not use any sharp, metal objects Dry thoroughly and reassemble when ready to use Do not submerge the gearbox in water or any other liquids Warranty Info This product comes with a 5 year warranty