Wifi development board

LoLin V3 NodeMcu Lua WIFI Development Board Description: This is a new version of NodeMcu Lua WIFI Development Board Not compatible with MAC Notice: We don't offer any suport, please note that before you buy it !! More information check this:  http://www.nodemcu.com/index_en.html Package included: 1 x V3 NodeMcu Lua WIFI Development Board

NodeMcu Lua WIFI Development Board For ESP8266 Module Note: We don't offer any supports,sorry for the inconvenience Feature: Open-source, Interactive, Programmable, Low cost, Simple, Smart, WI-FI enabled The Development Kit based on ESP8266, integates GPIO, PWM, IIC, 1-Wire and ADC all in one board. Power your developement in the fastest way combinating with NodeMCU Firmware! Package included: 1 x NodeMcu Lua WIFI Development Board For ESP8266 Module

Description: This is a new version of NodeMcu Lua WIFI Development Board Not compatible with MAC Notice: We don't offer any suport, please note that before you buy it !! More information check this:  Package included: 5 x V3 NodeMcu Lua WIFI Development Board  

Description: Brand: Wemos ESP8266 ESP-WROOM-02 WIFI Development Board For Arduino UNO R3 Package included: 1 x ESP8266 ESP-WROOM-02 Development Board

Buy 20pcs ESP8266 WIFI Development Board Base Expansion Board V3 Backplane Geekcrei for R854.47

Buy 20pcs ESP8266 WIFI Development Board Base Expansion Board V3 Backplane Geekcreit for Arduino - pr... for R859.00

Buy ESP8266 WIFI Development Board Base Expansion Board V3 Backplane for R198.00

Buy 3pcs ESP8266 WIFI Development Board Base Expansion Board V3 Backplane Geekcreit for Arduino - produc for R197.00

Buy Geekcreit LoLin V3 NodeMcu Lua WIFI Development Board ESP8266 Serial Wifi Module... for R219.00

Buy SZDOIT DT-BL10 WiFi Development Board with BL602 IoT SDK RISC-V WiFi blu for R209.00

Buy 5Pcs SZDOIT DT-BL10 WiFi Development Board with BL602 IoT SDK RISC-V WiFi bluetooth 5.0 BLE SoC 2 in for R581.99

Buy 5Pcs SZDOIT DT-BL10 WiFi Development Board with BL602 IoT SDK RISC-V WiFi bluet for R642.00

Buy 3Pcs SZDOIT DT-BL10 WiFi Development Board with BL602 IoT SDK RISC-V W for R329.00

Buy 3Pcs SZDOIT DT-BL10 WiFi Development Board with BL602 IoT SDK RISC-V WiF for R309.00

Buy Geekcreit Mini NodeMCU ESP8266 WIFI Development Board Based On ESP-12F for R253.87

Buy Air602 W600 WiFi Development Board USB Interface CH340N Module Compatible with ESP8266 for R175.00

Buy 3Pcs Geekcreit LoLin V3 NodeMcu Lua WIFI Development Board for R428.00

Buy Geekcreit NodeMcu Lua ESP8266 ESP-12F WIFI Development Board for R354.00

Buy Waveshare NodeMCU-32-S2-Kit ESP32-S2 WiFi Development Board with ESP-12K Module for R291.58

Description: Mini version NodeMCU board is developed by doit company, which is made by double pcb. This board encapsulated by the newest 4M Flash ESP8266-12F module. So it is more stable and more better performance. Each board from doit company is tested. Feature: Use the full new (not old) Ch340 chip Novel design for the more stable usb Each board is strictly tested Compatible with Arduino: https://github.com/esp8266/Arduino Compatible with NodeMCU: www.nodemcu.com Package included: 5 x mini NodeMCU board 10 x 8pins row needles 10 x 8pins row females

Description: Mini version NodeMCU board is developed by doit company, which is made by double pcb. This board encapsulated by the newest 4M Flash ESP8266-12F module. So it is more stable and more better performance. Each board from doit company is tested. Feature: Use the full new (not old) Ch340 chip Novel design for the more stable usb Each board is strictly tested Compatible with Arduino: https://github.com/esp8266/Arduino Compatible with NodeMCU: www.nodemcu.com Package included: 3 x mini NodeMCU board 6 x 8pins row needles 6 x 8pins row females

Feature: Support frequency range: 2.4~2.4835GHz Support STA/AP/AP+STA function Support AirKiss - key distribution network Support TCP, UDP, HTTP, DHCP, DNS, NTP, ICMP, etc. The serial port supports RTS/CTS, and the baud rate ranges from 1200bps to 2Mbps Support serial port transparent transmission function Support WIFI remote upgrade function AT command compatible with ESP8266 (UART1 interface) Tips: It is recommended that beginners first use the USB to TTL module test, familiar with the module AT command and logic relationship and then use the microcontroller to develop. Materials required: W1FI module, USB to TTL module, DuPont line Instructions: 1. Connect the three pins of the WIFI module (GND, TX1, RX1) to the USB to TTL module. 2. Access the computer, open the serial port debugging assistant, send the AT command test Project Parameter Support WiFi standard IEEE802.11 b/g/n RF system impedance 50Ω SWR Frequency Range 2.4￣ﾀﾜ2.4835 GHz Receiving sensitivity 20MHz MCS7@-71dBm 40MHz MCS7@-68dBm 54Mbps@-73dBm 11Mbps@-86dBm 1Mbps@-95dBm Physical layer data rate 802.11n MCS 0-7 150Mbps Modulation DSSS, OFDM, DBPSK, DQPSK, CCK, QAM16/64 Output Power IEEE802.11b, DSSS 1Mbps, POUT = +17dBm; IEEE802.11g, OFDM 54Mbps, POUT = +10dBm; IEEE802.11n, OFDM MCS7, POUT = +10dBm; Interface Type UART, SPI, GPIO Interface rate 2Mbps@UART (Max) 50Mbps@SPI (Max) Operating Voltage 3.3V Working current 110mA Network Type STA/AP/AP+STA Encryption WPA-PSK/WPA2-PSK Network protocol TCP/UDP/ARP/ICMP/DHCP/DNS/HTTP Interface Protocol AT+Instruction Set Package includes: 1 x WiFi Module

DEVELOPMENT BOARD; ARDUINO LINUX WIFI AND ETHERNET DEVELOPMENT BOARD WITH USB HOST AND MICRO SD CARD